Re: [PATCH v2] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_p

[Lee Jones <lee.jones@linaro.org>]

On Wed, 09 Nov 2016, Lukasz Majewski wrote:

> Hi Lee,
> 
> > On Tue, 08 Nov 2016, Lukasz Majewski wrote:
> > 
> > > Dear All,
> > > 
> > > > The commit a55944ca82d2 ("backlight: update bd state & fb_blank
> > > > properties when necessary") has posed some extra restrictions on
> > > > blanking and unblanking frame buffer device.
> > > > 
> > > > Unfortunately, pwm_bl driver's probe did not initialize members of
> > > > struct backlight_device necessary for further blank/unblank
> > > > operation.
> > > > 
> > > > This code in case of initial unblank of backlight device (default 
> > > > behaviour) sets use_count to 1 and marks this particular backlight
> > > > device as used by all available fb devices (since it is not known
> > > > during probe how much and which fb devices will be assigned).
> > > > 
> > > > Without this code, the backlight works properly until one tries to
> > > > blank it manually from sysfs with "echo 1
> > > > > /sys/class/graphics/fb0/blank". Since fb_bl_on[0] and use_count
> > > > > were both set to 0, the logic at
> > > > fb_notifier_callback (@backlight.c) thought that we didn't turn on
> > > > (unblanked) the backlight device and refuses to disable (blank)
> > > > it. As a result we see garbage from fb displayed.
> > > 
> > > COmments/acks are more than welcome :-)
> > 
> > I thought Jingoo already replied to you?
> 
> Yes, Jingoo replied to me and asked for correcting the patch
> description. The corrected patch is the v2.

Ah, I see.  You've attached the v4 to the original set.

Ball is in Jingoo's court.

> > > > Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> > > > ---
> > > > The patch has been tested on i.MX6q with 4.9-rc3
> > > > SHA1: a909d3e636995ba7c349e2ca5dbb528154d4ac30
> > > > ---
> > > > Changes for v2:
> > > > - Update commit message with proper other commit reference
> > > > 
> > > > ---
> > > >  drivers/video/backlight/pwm_bl.c | 10 +++++++++-
> > > >  1 file changed, 9 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/video/backlight/pwm_bl.c
> > > > b/drivers/video/backlight/pwm_bl.c index 1261400..6859ba0 100644
> > > > --- a/drivers/video/backlight/pwm_bl.c
> > > > +++ b/drivers/video/backlight/pwm_bl.c
> > > > @@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct
> > > > platform_device *pdev) struct pwm_bl_data *pb;
> > > >  	int initial_blank = FB_BLANK_UNBLANK;
> > > >  	struct pwm_args pargs;
> > > > -	int ret;
> > > > +	int ret, i;
> > > >  
> > > >  	if (!data) {
> > > >  		ret = pwm_backlight_parse_dt(&pdev->dev,
> > > > &defdata); @@ -348,6 +348,14 @@ static int
> > > > pwm_backlight_probe(struct platform_device *pdev) 
> > > >  	bl->props.brightness = data->dft_brightness;
> > > >  	bl->props.power = initial_blank;
> > > > +
> > > > +	if (initial_blank = FB_BLANK_UNBLANK) {
> > > > +		for (i = 0; i < FB_MAX; i++)
> > > > +			bl->fb_bl_on[i] = true;
> > > > +
> > > > +		bl->use_count = 1;
> > > > +	}
> > > > +
> > > >  	backlight_update_status(bl);
> > > >  
> > > >  	platform_set_drvdata(pdev, bl);
> > > 
> > 
> > 
> > 
> 



-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog