[RESEND PATCH v1 02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Sysctrl and Djtag dts bindings

[mark.rutland@arm.com (Mark Rutland)]

Hi,

On Thu, Nov 03, 2016 at 01:41:58AM -0400, Anurup M wrote:
> From: Tan Xiaojun <tanxiaojun@huawei.com>
> 
> 	1) Add Hisilicon HiP05/06/07 CPU and ALGSUB system controller dts
> 	   bindings.
> 	2) Add Hisilicon Djtag dts binding.
> 
> Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
> Signed-off-by: Anurup M <anurup.m@huawei.com>
> ---
>  .../bindings/arm/hisilicon/hisilicon.txt           | 82 ++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
> index 7df79a7..341cbb9 100644
> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
> @@ -270,3 +270,85 @@ Required Properties:
>    [1]: bootwrapper size
>    [2]: relocation physical address
>    [3]: relocation size


> +-----------------------------------------------------------------------
> +The Hisilicon Djtag in CPU die is an independent component which connects with
> +some other components in the SoC by Debug Bus. This driver can be configured
> +to access the registers of connecting components (like L3 cache, l3 cache PMU
> + etc.) during real time debugging by sysctrl. These components appear as child
> +nodes of djtag.

Please put the djtag binding in a new file. 

It's clearly unrelated to many other things in this file, which should
also be split out.

> +The Hip05/06/07 CPU system controller(sysctrl) support to manage some important
> +components (such as clock, reset, soft reset, secure debugger, etc.).
> +The CPU sysctrl registers in hip05/06/07 doesnot use syscon but will be mapped
> +by djtag driver for use by connecting components.

The djtag driver is irrelvant here.

If there's a realtionship between the two, please define that in the
binding rather than implicitly assuming it in the driver.

> +
> +Required properties:
> +  - compatible : "hisilicon,hip05-cpu-djtag-v1"
> +  - reg : Register address and size
> +
> +Hisilicon HiP06 djtag for CPU sysctrl
> +Required properties:
> +- compatible : "hisilicon,hip06-sysctrl", "syscon", "simple-mfd";

This looks messy. Why is this syscon and a simple-mfd?

We should kill off / deprecate the syscon binding. It's completely
meaningless.

> +- reg : Register address and size
> +- djtag :
> +  - compatible : "hisilicon,hip06-cpu-djtag-v1"
> +  - reg : Register address and size
> +
> +Hisilicon HiP07 djtag for CPU sysctrl
> +Required properties:
> +  - compatible : "hisilicon,hip07-cpu-djtag-v2"
> +  - reg : Register address and size
> +
> +Example:
> +	/* for Hisilicon HiP05 djtag for CPU sysctrl */
> +	djtag0: djtag at 80010000 {
> +		compatible = "hisilicon,hip05-cpu-djtag-v1";
> +		reg = <0x0 0x80010000 0x0 0x10000>;
> +
> +		/* For L3 cache PMU */
> +		pmul3c0 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			scl-id = <0x02>;
> +			num-events = <0x16>;
> +			num-counters = <0x08>;
> +			module-id = <0x04>;
> +			num-banks = <0x04>;
> +			cfgen-map = <0x02 0x04 0x01 0x08>;
> +			counter-reg = <0x170>;
> +			evctrl-reg = <0x04>;
> +			event-en = <0x1000000>;
> +			evtype-reg = <0x140>;
> +		};

This sub-node needs a binding document.

These properties are completely opaque

> +	};
> +
> +-----------------------------------------------------------------------
> +The Hisilicon HiP05/06/07 ALGSUB system controller(sysctrl) is in IO die
> +of SoC. It has a similar function as the Hisilicon HiP05/06/07 CPU system
> +controller in CPU die and it manage different components, like RSA, etc.
> +The Hisilicon Djtag in IO die has a similar function as in CPU die and maps
> +the sysctrl registers for use by connecting components.
> +All connecting components shall appear as child nodes of djtag.

I don't follow the above. This describes an ALGSUB system controllerm
but the documentation below is all about djtag.

Thanks,
Mark.

> +Hisilicon HiP05 djtag for ALGSUB sysctrl
> +Required properties:
> +  - compatible : "hisilicon,hip05-io-djtag-v1"
> +  - reg : Register address and size
> +
> +Hisilicon HiP06 djtag for ALGSUB sysctrl
> +Required properties:
> +  - compatible : "hisilicon,hip06-io-djtag-v2"
> +  - reg : Register address and size
> +
> +Hisilicon HiP07 djtag for ALGSUB sysctrl
> +Required properties:
> +  - compatible : "hisilicon,hip07-io-djtag-v2"
> +  - reg : Register address and size
> +
> +Example:
> +	/* for Hisilicon HiP05 djtag for alg sysctrl */
> +	djtag0: djtag at d0000000 {
> +	       compatible = "hisilicon,hip05-io-djtag-v1";
> +		reg = <0x0 0xd0000000 0x0 0x10000>;
> +	};
> -- 
> 2.1.4
>