From: Stephen Boyd <sboyd@codeaurora.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Mike Turquette <mturquette@baylibre.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] Allwinner clock changes for 4.10
Date: Wed, 16 Nov 2016 11:26:56 -0800 [thread overview]
Message-ID: <20161116192656.GJ25626@codeaurora.org> (raw)
In-Reply-To: <20161115212615.lm3guceyfmdjnhfp@lukather>
On 11/15, Maxime Ripard wrote:
> Hi Mike, Stephen,
>
> Please pull the following patches for the next merge window.
>
> Thanks!
> Maxime
>
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
>
> Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git sunxi-clk-for-4.10
>
> for you to fetch changes up to 0f6f9302b819ca352cfd4f42c18ec08d521f9cae:
>
> clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks (2016-11-11 21:47:41 +0100)
Pulled into clk-next, but I get the following grumbles...
ERROR: space prohibited before that ',' (ctx:WxW)
#282: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:206:
+ "pll-cpux" , "pll-cpux" };
^
ERROR: space prohibited before that ',' (ctx:WxW)
#289: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:213:
+ "axi" , "pll-periph0" };
^
ERROR: space prohibited before that ',' (ctx:WxE)
#325: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:249:
+ "pll-periph0-2x" ,
^
ERROR: space prohibited before that ',' (ctx:WxW)
#333: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:257:
+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
^
drivers/clk/sunxi-ng/ccu-sun50i-a64.c:160:16: warning: symbol 'pll_mipi_clk' was not declared. Should it be static?
drivers/clk/sunxi-ng/ccu-sun50i-a64.c:507:16: warning: symbol 'tcon1_clk' was not declared. Should it be static?
I'll go fix them this time, but please be more careful next time.
---8<----
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 0674515e2bad..e3c084cc6da5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -157,7 +157,7 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
*/
#define SUN50I_A64_PLL_MIPI_REG 0x040
-struct ccu_nkm pll_mipi_clk = {
+static struct ccu_nkm pll_mipi_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 4),
@@ -203,14 +203,14 @@ static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
CLK_SET_RATE_UNGATE);
static const char * const cpux_parents[] = { "osc32k", "osc24M",
- "pll-cpux" , "pll-cpux" };
+ "pll-cpux", "pll-cpux" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
0x050, 16, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
- "axi" , "pll-periph0" };
+ "axi", "pll-periph0" };
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
@@ -246,7 +246,7 @@ static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
0x054, 8, 2, apb1_div_table, 0);
static const char * const apb2_parents[] = { "osc32k", "osc24M",
- "pll-periph0-2x" ,
+ "pll-periph0-2x",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
0, 5, /* M */
@@ -254,7 +254,7 @@ static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
24, 2, /* mux */
0);
-static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
{ .index = 1, .div = 2 },
};
@@ -504,7 +504,7 @@ static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
static const u8 tcon1_table[] = { 0, 2, };
-struct ccu_div tcon1_clk = {
+static struct ccu_div tcon1_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV(0, 4),
.mux = _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table),
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Allwinner clock changes for 4.10
Date: Wed, 16 Nov 2016 11:26:56 -0800 [thread overview]
Message-ID: <20161116192656.GJ25626@codeaurora.org> (raw)
In-Reply-To: <20161115212615.lm3guceyfmdjnhfp@lukather>
On 11/15, Maxime Ripard wrote:
> Hi Mike, Stephen,
>
> Please pull the following patches for the next merge window.
>
> Thanks!
> Maxime
>
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
>
> Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git sunxi-clk-for-4.10
>
> for you to fetch changes up to 0f6f9302b819ca352cfd4f42c18ec08d521f9cae:
>
> clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks (2016-11-11 21:47:41 +0100)
Pulled into clk-next, but I get the following grumbles...
ERROR: space prohibited before that ',' (ctx:WxW)
#282: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:206:
+ "pll-cpux" , "pll-cpux" };
^
ERROR: space prohibited before that ',' (ctx:WxW)
#289: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:213:
+ "axi" , "pll-periph0" };
^
ERROR: space prohibited before that ',' (ctx:WxE)
#325: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:249:
+ "pll-periph0-2x" ,
^
ERROR: space prohibited before that ',' (ctx:WxW)
#333: FILE: drivers/clk/sunxi-ng/ccu-sun50i-a64.c:257:
+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
^
drivers/clk/sunxi-ng/ccu-sun50i-a64.c:160:16: warning: symbol 'pll_mipi_clk' was not declared. Should it be static?
drivers/clk/sunxi-ng/ccu-sun50i-a64.c:507:16: warning: symbol 'tcon1_clk' was not declared. Should it be static?
I'll go fix them this time, but please be more careful next time.
---8<----
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 0674515e2bad..e3c084cc6da5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -157,7 +157,7 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
*/
#define SUN50I_A64_PLL_MIPI_REG 0x040
-struct ccu_nkm pll_mipi_clk = {
+static struct ccu_nkm pll_mipi_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 4),
@@ -203,14 +203,14 @@ static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
CLK_SET_RATE_UNGATE);
static const char * const cpux_parents[] = { "osc32k", "osc24M",
- "pll-cpux" , "pll-cpux" };
+ "pll-cpux", "pll-cpux" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
0x050, 16, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
- "axi" , "pll-periph0" };
+ "axi", "pll-periph0" };
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
@@ -246,7 +246,7 @@ static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
0x054, 8, 2, apb1_div_table, 0);
static const char * const apb2_parents[] = { "osc32k", "osc24M",
- "pll-periph0-2x" ,
+ "pll-periph0-2x",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
0, 5, /* M */
@@ -254,7 +254,7 @@ static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
24, 2, /* mux */
0);
-static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
{ .index = 1, .div = 2 },
};
@@ -504,7 +504,7 @@ static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
static const u8 tcon1_table[] = { 0, 2, };
-struct ccu_div tcon1_clk = {
+static struct ccu_div tcon1_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV(0, 4),
.mux = _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table),
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-11-16 19:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-15 21:26 [GIT PULL] Allwinner clock changes for 4.10 Maxime Ripard
2016-11-15 21:26 ` Maxime Ripard
2016-11-16 19:26 ` Stephen Boyd [this message]
2016-11-16 19:26 ` Stephen Boyd
2016-11-17 22:35 ` Maxime Ripard
2016-11-17 22:35 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161116192656.GJ25626@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.