From: Minchan Kim <minchan@kernel.org>
To: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Hyeoncheol Lee <cheol.lee@lge.com>,
yjay.kim@lge.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org,
"Darrick J . Wong" <darrick.wong@oracle.com>
Subject: Re: [PATCH] mm: support anonymous stable page
Date: Fri, 18 Nov 2016 15:58:20 +0900 [thread overview]
Message-ID: <20161118065820.GA7277@bbox> (raw)
In-Reply-To: <alpine.LSU.2.11.1611171950250.7304@eggly.anvils>
Hi Hugh,
On Thu, Nov 17, 2016 at 08:35:10PM -0800, Hugh Dickins wrote:
> On Fri, 11 Nov 2016, Minchan Kim wrote:
> > Sorry for sending a wrong version. Here is new one.
> >
> > From 2d42ead9335cde51fd58d6348439ca03cf359ba2 Mon Sep 17 00:00:00 2001
> > From: Minchan Kim <minchan@kernel.org>
> > Date: Fri, 11 Nov 2016 15:02:57 +0900
> > Subject: [PATCH] mm: support anonymous stable page
> >
> > For developemnt for zram-swap asynchronous writeback, I found
> > strange corruption of compressed page. With investigation, it
> > reveals currently stable page doesn't support anonymous page.
> > IOW, reuse_swap_page can reuse the page without waiting
> > writeback completion so that it can corrupt data during
> > zram compression. It can affect every swap device which supports
> > asynchronous writeback and CRC checking as well as zRAM.
> >
> > Unfortunately, reuse_swap_page should be atomic so that we
> > cannot wait on writeback in there so the approach in this patch
> > is simply return false if we found it needs stable page.
> > Although it increases memory footprint temporarily, it happens
> > rarely and it should be reclaimed easily althoug it happened.
> > Also, It would be better than waiting of IO completion, which
> > is critial path for application latency.
> >
> > Cc: Hugh Dickins <hughd@google.com>
> > Cc: Darrick J. Wong <darrick.wong@oracle.com>
> > Signed-off-by: Minchan Kim <minchan@kernel.org>
>
> Ack to your intention (we discussed this together years ago, but saw
> no actual demand for it before now), and I like what you're doing;
> but it has to be NAK to this implementation.
>
> I sensed there was an problem when you posted; but only now, after
> searching through the uses of mapping->host, do I see that problem.
>
> You're setting swap's mapping->host = inode when it used to be NULL:
> which seems like a very good way to get what you need, but I'm afraid
> it's a change which goes way beyond your intention.
>
> See inode_to_bdi(): for ordinary disk-based swap, it will now pick
> up the bdi of the block device instead of noop_backing_dev_info, so
> swap would then pass the mapping_cap_account_dirty() and similar
> tests (mostly in mm/page-writeback.c), and go down codepaths it
> has never gone down before.
>
> It's possible that swap (and shmem) would be better off going down
> those paths, to be throttled in a similar way to files; but that's
> debatable, and a much bigger change than you want to get into for
> zram stable pages.
Good point.
Thanks for the review, Hugh.
>
> Maybe add SWP_STABLE_WRITES in include/linux/swap.h, and set that
> in swap_info->flags according to bdi_cap_stable_pages_required(),
> leaving mapping->host itself NULL as before?
The problem with the approach is that we need to get swap_info_struct
in reuse_swap_page so maybe, every caller should pass swp_entry_t
into reuse_swap_page. It would be no problem if swap slot is really
referenced the page(IOW, pte is real swp_entry_t) but some cases
where swap slot is already empty but the page remains in only
swap cache, we cannot pass swp_entry_t which means that we cannot
get swap_info_struct.
So, if I didn't miss, another option I can imagine is to move
SWP_STABLE_WRITES to address_space->flags as AS_STABLE_WRITES.
With that, we can always get the information without passing
swp_entry_t. Is there any better idea?
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index dd15d39e1985..5397e82bfd57 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -26,6 +26,8 @@ enum mapping_flags {
AS_EXITING = 4, /* final truncate in progress */
/* writeback related tags are not used */
AS_NO_WRITEBACK_TAGS = 5,
+ /* need stable write for swap */
+ AS_STABLE_WRITES = 6,
};
static inline void mapping_set_error(struct address_space *mapping, int error)
@@ -55,6 +57,21 @@ static inline int mapping_unevictable(struct address_space *mapping)
return !!mapping;
}
+static inline void mapping_set_stable(struct address_space *mapping)
+{
+ set_bit(AS_STABLE_WRITES, &mapping->flags);
+}
+
+static inline void mapping_clear_stable(struct address_space *mapping)
+{
+ clear_bit(AS_STABLE_WRITES, &mapping->flags);
+}
+
+static inline int mapping_stable(struct address_space *mapping)
+{
+ return test_bit(AS_STABLE_WRITES, &mapping->flags);
+}
+
static inline void mapping_set_exiting(struct address_space *mapping)
{
set_bit(AS_EXITING, &mapping->flags);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 2210de290b54..0c31fd814933 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -943,11 +943,20 @@ bool reuse_swap_page(struct page *page, int *total_mapcount)
count = page_trans_huge_mapcount(page, total_mapcount);
if (count <= 1 && PageSwapCache(page)) {
count += page_swapcount(page);
- if (count == 1 && !PageWriteback(page)) {
+ if (count != 1)
+ goto out;
+ if (!PageWriteback(page)) {
delete_from_swap_cache(page);
SetPageDirty(page);
+ } else {
+ struct address_space *mapping;
+
+ mapping = page_mapping(page);
+ if (mapping_stable(mapping))
+ return false;
}
}
+out:
return count <= 1;
}
@@ -2386,6 +2395,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
unsigned long *frontswap_map = NULL;
struct page *page = NULL;
struct inode *inode = NULL;
+ struct address_space *swapper_space;
if (swap_flags & ~SWAP_FLAGS_VALID)
return -EINVAL;
@@ -2447,6 +2457,13 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
error = -ENOMEM;
goto bad_swap;
}
+
+ swapper_space = &swapper_spaces[p->type];
+ if (bdi_cap_stable_pages_required(inode_to_bdi(inode)))
+ mapping_set_stable(swapper_space);
+ else
+ mapping_clear_stable(swapper_space);
+
if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
int cpu;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Minchan Kim <minchan@kernel.org>
To: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Hyeoncheol Lee <cheol.lee@lge.com>, <yjay.kim@lge.com>,
<linux-mm@kvack.org>, <linux-kernel@vger.kernel.org>,
"Darrick J . Wong" <darrick.wong@oracle.com>
Subject: Re: [PATCH] mm: support anonymous stable page
Date: Fri, 18 Nov 2016 15:58:20 +0900 [thread overview]
Message-ID: <20161118065820.GA7277@bbox> (raw)
In-Reply-To: <alpine.LSU.2.11.1611171950250.7304@eggly.anvils>
Hi Hugh,
On Thu, Nov 17, 2016 at 08:35:10PM -0800, Hugh Dickins wrote:
> On Fri, 11 Nov 2016, Minchan Kim wrote:
> > Sorry for sending a wrong version. Here is new one.
> >
> > From 2d42ead9335cde51fd58d6348439ca03cf359ba2 Mon Sep 17 00:00:00 2001
> > From: Minchan Kim <minchan@kernel.org>
> > Date: Fri, 11 Nov 2016 15:02:57 +0900
> > Subject: [PATCH] mm: support anonymous stable page
> >
> > For developemnt for zram-swap asynchronous writeback, I found
> > strange corruption of compressed page. With investigation, it
> > reveals currently stable page doesn't support anonymous page.
> > IOW, reuse_swap_page can reuse the page without waiting
> > writeback completion so that it can corrupt data during
> > zram compression. It can affect every swap device which supports
> > asynchronous writeback and CRC checking as well as zRAM.
> >
> > Unfortunately, reuse_swap_page should be atomic so that we
> > cannot wait on writeback in there so the approach in this patch
> > is simply return false if we found it needs stable page.
> > Although it increases memory footprint temporarily, it happens
> > rarely and it should be reclaimed easily althoug it happened.
> > Also, It would be better than waiting of IO completion, which
> > is critial path for application latency.
> >
> > Cc: Hugh Dickins <hughd@google.com>
> > Cc: Darrick J. Wong <darrick.wong@oracle.com>
> > Signed-off-by: Minchan Kim <minchan@kernel.org>
>
> Ack to your intention (we discussed this together years ago, but saw
> no actual demand for it before now), and I like what you're doing;
> but it has to be NAK to this implementation.
>
> I sensed there was an problem when you posted; but only now, after
> searching through the uses of mapping->host, do I see that problem.
>
> You're setting swap's mapping->host = inode when it used to be NULL:
> which seems like a very good way to get what you need, but I'm afraid
> it's a change which goes way beyond your intention.
>
> See inode_to_bdi(): for ordinary disk-based swap, it will now pick
> up the bdi of the block device instead of noop_backing_dev_info, so
> swap would then pass the mapping_cap_account_dirty() and similar
> tests (mostly in mm/page-writeback.c), and go down codepaths it
> has never gone down before.
>
> It's possible that swap (and shmem) would be better off going down
> those paths, to be throttled in a similar way to files; but that's
> debatable, and a much bigger change than you want to get into for
> zram stable pages.
Good point.
Thanks for the review, Hugh.
>
> Maybe add SWP_STABLE_WRITES in include/linux/swap.h, and set that
> in swap_info->flags according to bdi_cap_stable_pages_required(),
> leaving mapping->host itself NULL as before?
The problem with the approach is that we need to get swap_info_struct
in reuse_swap_page so maybe, every caller should pass swp_entry_t
into reuse_swap_page. It would be no problem if swap slot is really
referenced the page(IOW, pte is real swp_entry_t) but some cases
where swap slot is already empty but the page remains in only
swap cache, we cannot pass swp_entry_t which means that we cannot
get swap_info_struct.
So, if I didn't miss, another option I can imagine is to move
SWP_STABLE_WRITES to address_space->flags as AS_STABLE_WRITES.
With that, we can always get the information without passing
swp_entry_t. Is there any better idea?
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index dd15d39e1985..5397e82bfd57 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -26,6 +26,8 @@ enum mapping_flags {
AS_EXITING = 4, /* final truncate in progress */
/* writeback related tags are not used */
AS_NO_WRITEBACK_TAGS = 5,
+ /* need stable write for swap */
+ AS_STABLE_WRITES = 6,
};
static inline void mapping_set_error(struct address_space *mapping, int error)
@@ -55,6 +57,21 @@ static inline int mapping_unevictable(struct address_space *mapping)
return !!mapping;
}
+static inline void mapping_set_stable(struct address_space *mapping)
+{
+ set_bit(AS_STABLE_WRITES, &mapping->flags);
+}
+
+static inline void mapping_clear_stable(struct address_space *mapping)
+{
+ clear_bit(AS_STABLE_WRITES, &mapping->flags);
+}
+
+static inline int mapping_stable(struct address_space *mapping)
+{
+ return test_bit(AS_STABLE_WRITES, &mapping->flags);
+}
+
static inline void mapping_set_exiting(struct address_space *mapping)
{
set_bit(AS_EXITING, &mapping->flags);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 2210de290b54..0c31fd814933 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -943,11 +943,20 @@ bool reuse_swap_page(struct page *page, int *total_mapcount)
count = page_trans_huge_mapcount(page, total_mapcount);
if (count <= 1 && PageSwapCache(page)) {
count += page_swapcount(page);
- if (count == 1 && !PageWriteback(page)) {
+ if (count != 1)
+ goto out;
+ if (!PageWriteback(page)) {
delete_from_swap_cache(page);
SetPageDirty(page);
+ } else {
+ struct address_space *mapping;
+
+ mapping = page_mapping(page);
+ if (mapping_stable(mapping))
+ return false;
}
}
+out:
return count <= 1;
}
@@ -2386,6 +2395,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
unsigned long *frontswap_map = NULL;
struct page *page = NULL;
struct inode *inode = NULL;
+ struct address_space *swapper_space;
if (swap_flags & ~SWAP_FLAGS_VALID)
return -EINVAL;
@@ -2447,6 +2457,13 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
error = -ENOMEM;
goto bad_swap;
}
+
+ swapper_space = &swapper_spaces[p->type];
+ if (bdi_cap_stable_pages_required(inode_to_bdi(inode)))
+ mapping_set_stable(swapper_space);
+ else
+ mapping_clear_stable(swapper_space);
+
if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
int cpu;
next prev parent reply other threads:[~2016-11-18 6:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-11 5:30 [PATCH] mm: support anonymous stable page Minchan Kim
2016-11-11 5:30 ` Minchan Kim
2016-11-11 6:06 ` Minchan Kim
2016-11-11 6:06 ` Minchan Kim
2016-11-18 4:35 ` Hugh Dickins
2016-11-18 4:35 ` Hugh Dickins
2016-11-18 6:58 ` Minchan Kim [this message]
2016-11-18 6:58 ` Minchan Kim
2016-11-18 21:26 ` Hugh Dickins
2016-11-18 21:26 ` Hugh Dickins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161118065820.GA7277@bbox \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cheol.lee@lge.com \
--cc=darrick.wong@oracle.com \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=yjay.kim@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.