* [PATCH v2 RESEND 1/3] arm64: dts: exynos: TM2 - add support for GScaler devices
2016-11-18 12:23 [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board Marek Szyprowski
@ 2016-11-18 12:23 ` Marek Szyprowski
2016-11-18 12:23 ` [PATCH v2 RESEND 2/3] arm64: dts: exynos: TM2 - add support for JPEG codec device Marek Szyprowski
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Marek Szyprowski @ 2016-11-18 12:23 UTC (permalink / raw)
To: linux-samsung-soc
Cc: Marek Szyprowski, Sylwester Nawrocki, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz, Seung-Woo Kim, Chanwoo Choi
This patch adds device nodes for GScaler devices to Exynos5433 SoC dtsi
and proper initial clock configuration to TM2 dts.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 10 ++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 69 +++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 2569e4a..8eb59ad 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -23,6 +23,9 @@
compatible = "samsung,tm2", "samsung,exynos5433";
aliases {
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ gsc2 = &gsc_2;
pinctrl0 = &pinctrl_alive;
pinctrl1 = &pinctrl_aud;
pinctrl2 = &pinctrl_cpif;
@@ -186,6 +189,13 @@
<66700000>, <66700000>;
};
+&cmu_gscl {
+ assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+ <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
&cpu0 {
cpu-supply = <&buck3_reg>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 7d71827..945b250 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -805,6 +805,45 @@
reg = <0x145f0000 0x1038>;
};
+ gsc_0: video-scaler@13C00000 {
+ compatible = "samsung,exynos5433-gsc";
+ reg = <0x13c00000 0x1000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu",
+ "aclk_gsclbend";
+ clocks = <&cmu_gscl CLK_PCLK_GSCL0>,
+ <&cmu_gscl CLK_ACLK_GSCL0>,
+ <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+ <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+ iommus = <&sysmmu_gscl0>;
+ };
+
+ gsc_1: video-scaler@13C10000 {
+ compatible = "samsung,exynos5433-gsc";
+ reg = <0x13c10000 0x1000>;
+ interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu",
+ "aclk_gsclbend";
+ clocks = <&cmu_gscl CLK_PCLK_GSCL1>,
+ <&cmu_gscl CLK_ACLK_GSCL1>,
+ <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+ <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+ iommus = <&sysmmu_gscl1>;
+ };
+
+ gsc_2: video-scaler@13C20000 {
+ compatible = "samsung,exynos5433-gsc";
+ reg = <0x13c20000 0x1000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu",
+ "aclk_gsclbend";
+ clocks = <&cmu_gscl CLK_PCLK_GSCL2>,
+ <&cmu_gscl CLK_ACLK_GSCL2>,
+ <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+ <&cmu_gscl CLK_ACLK_GSCLBEND_333>;
+ iommus = <&sysmmu_gscl2>;
+ };
+
sysmmu_decon0x: sysmmu@0x13a00000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a00000 0x1000>;
@@ -825,6 +864,36 @@
#iommu-cells = <0>;
};
+ sysmmu_gscl0: sysmmu@0x13C80000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13C80000 0x1000>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "aclk", "pclk";
+ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
+ <&cmu_gscl CLK_PCLK_SMMU_GSCL0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl1: sysmmu@0x13C90000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13C90000 0x1000>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "aclk", "pclk";
+ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
+ <&cmu_gscl CLK_PCLK_SMMU_GSCL1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl2: sysmmu@0x13CA0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13CA0000 0x1000>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "aclk", "pclk";
+ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
+ <&cmu_gscl CLK_PCLK_SMMU_GSCL2>;
+ #iommu-cells = <0>;
+ };
+
serial_0: serial@14c10000 {
compatible = "samsung,exynos5433-uart";
reg = <0x14c10000 0x100>;
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 RESEND 2/3] arm64: dts: exynos: TM2 - add support for JPEG codec device
2016-11-18 12:23 [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board Marek Szyprowski
2016-11-18 12:23 ` [PATCH v2 RESEND 1/3] arm64: dts: exynos: TM2 - add support for GScaler devices Marek Szyprowski
@ 2016-11-18 12:23 ` Marek Szyprowski
2016-11-18 12:23 ` [PATCH v2 RESEND 3/3] arm64: dts: exynos: TM2 - add support for MFC video " Marek Szyprowski
2016-11-18 12:28 ` [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board Krzysztof Kozlowski
3 siblings, 0 replies; 5+ messages in thread
From: Marek Szyprowski @ 2016-11-18 12:23 UTC (permalink / raw)
To: linux-samsung-soc
Cc: Marek Szyprowski, Sylwester Nawrocki, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz, Seung-Woo Kim, Chanwoo Choi
This patch adds device nodes for JPEG codec device to Exynos5433 SoC dtsi
and proper initial clock configuration to TM2 dts.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 11 +++++++++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 22 ++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 8eb59ad..6f506dd 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -196,6 +196,17 @@
<&cmu_top CLK_ACLK_GSCL_333>;
};
+&cmu_mscl {
+ assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+ <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
&cpu0 {
cpu-supply = <&buck3_reg>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 945b250..1d47480 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -844,6 +844,18 @@
iommus = <&sysmmu_gscl2>;
};
+ jpeg: codec@15020000 {
+ compatible = "samsung,exynos5433-jpeg";
+ reg = <0x15020000 0x10000>;
+ interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+ clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+ <&cmu_mscl CLK_ACLK_JPEG>,
+ <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+ <&cmu_mscl CLK_SCLK_JPEG>;
+ iommus = <&sysmmu_jpeg>;
+ };
+
sysmmu_decon0x: sysmmu@0x13a00000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a00000 0x1000>;
@@ -894,6 +906,16 @@
#iommu-cells = <0>;
};
+ sysmmu_jpeg: sysmmu@0x15060000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x15060000 0x1000>;
+ interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>,
+ <&cmu_mscl CLK_ACLK_SMMU_JPEG>;
+ #iommu-cells = <0>;
+ };
+
serial_0: serial@14c10000 {
compatible = "samsung,exynos5433-uart";
reg = <0x14c10000 0x100>;
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 RESEND 3/3] arm64: dts: exynos: TM2 - add support for MFC video codec device
2016-11-18 12:23 [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board Marek Szyprowski
2016-11-18 12:23 ` [PATCH v2 RESEND 1/3] arm64: dts: exynos: TM2 - add support for GScaler devices Marek Szyprowski
2016-11-18 12:23 ` [PATCH v2 RESEND 2/3] arm64: dts: exynos: TM2 - add support for JPEG codec device Marek Szyprowski
@ 2016-11-18 12:23 ` Marek Szyprowski
2016-11-18 12:28 ` [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board Krzysztof Kozlowski
3 siblings, 0 replies; 5+ messages in thread
From: Marek Szyprowski @ 2016-11-18 12:23 UTC (permalink / raw)
To: linux-samsung-soc
Cc: Marek Szyprowski, Sylwester Nawrocki, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz, Seung-Woo Kim, Chanwoo Choi
This patch adds device nodes for MFC video codec device to Exynos5433 SoC
dtsi and proper initial clock configuration to TM2 dts.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 5 +++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 32 +++++++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 6f506dd..ce41781 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -196,6 +196,11 @@
<&cmu_top CLK_ACLK_GSCL_333>;
};
+&cmu_mfc {
+ assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
&cmu_mscl {
assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 1d47480..64226d5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -856,6 +856,18 @@
iommus = <&sysmmu_jpeg>;
};
+ mfc: codec@152E0000 {
+ compatible = "samsung,exynos5433-mfc";
+ reg = <0x152E0000 0x10000>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk", "aclk_xiu";
+ clocks = <&cmu_mfc CLK_PCLK_MFC>,
+ <&cmu_mfc CLK_ACLK_MFC>,
+ <&cmu_mfc CLK_ACLK_XIU_MFCX>;
+ iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>;
+ iommu-names = "left", "right";
+ };
+
sysmmu_decon0x: sysmmu@0x13a00000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a00000 0x1000>;
@@ -916,6 +928,26 @@
#iommu-cells = <0>;
};
+ sysmmu_mfc_0: sysmmu@0x15200000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x15200000 0x1000>;
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>,
+ <&cmu_mfc CLK_ACLK_SMMU_MFC_0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_1: sysmmu@0x15210000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x15210000 0x1000>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>,
+ <&cmu_mfc CLK_ACLK_SMMU_MFC_1>;
+ #iommu-cells = <0>;
+ };
+
serial_0: serial@14c10000 {
compatible = "samsung,exynos5433-uart";
reg = <0x14c10000 0x100>;
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board
2016-11-18 12:23 [PATCH v2 RESEND 0/3] Media devices support for Exynos5433 TM2 board Marek Szyprowski
` (2 preceding siblings ...)
2016-11-18 12:23 ` [PATCH v2 RESEND 3/3] arm64: dts: exynos: TM2 - add support for MFC video " Marek Szyprowski
@ 2016-11-18 12:28 ` Krzysztof Kozlowski
3 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-18 12:28 UTC (permalink / raw)
To: Marek Szyprowski
Cc: linux-samsung-soc, Sylwester Nawrocki, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz, Seung-Woo Kim, Chanwoo Choi
On Fri, Nov 18, 2016 at 01:23:10PM +0100, Marek Szyprowski wrote:
> Hi!
>
> This patchset adds support for various media devices found in Exynos 5433
> SoC and enables them on TM2 board. Patches are prepared on top of my
> previous patchset with fixes for Exynos 5433 TM2 board (see "Fixes for
> Exynos5433 TM2 board" thread).
>
> Best regards
> Marek Szyprowski
> Samsung R&D Institute Poland
>
>
> Changelog:
> v2 resend:
> - rebased on next/dt64
>
Thanks, applies fine now.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread