From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: idosch@mellanox.com, andrew@lunn.ch,
Florian Fainelli <f.fainelli@gmail.com>,
vivien.didelot@savoirfairelinux.com,
bridge@lists.linux-foundation.org, jiri@mellanox.com,
davem@davemloft.net
Subject: [Bridge] [RFC net-next 3/3] net: dsa: b53: Remove CPU port specific VLAN programming
Date: Mon, 21 Nov 2016 11:09:25 -0800 [thread overview]
Message-ID: <20161121190925.14530-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20161121190925.14530-1-f.fainelli@gmail.com>
Now that DSA calls into the switch driver to program the CPU port's VLAN
attributes, we can get rid of the code that dealt with adding/removing
the CPU port to a downstream facing port VLAN membership.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 7717b19dc806..6577286a2721 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -951,7 +951,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
- unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
u16 vid;
@@ -960,11 +959,11 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
b53_get_vlan_entry(dev, vid, vl);
- vl->members |= BIT(port) | BIT(cpu_port);
+ vl->members |= BIT(port);
if (untagged)
- vl->untag |= BIT(port) | BIT(cpu_port);
+ vl->untag |= BIT(port);
else
- vl->untag &= ~(BIT(port) | BIT(cpu_port));
+ vl->untag &= ~BIT(port);
b53_set_vlan_entry(dev, vid, vl);
b53_fast_age_vlan(dev, vid);
@@ -973,8 +972,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
if (pvid) {
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
vlan->vid_end);
- b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port),
- vlan->vid_end);
b53_fast_age_vlan(dev, vid);
}
}
@@ -984,7 +981,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
{
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
- unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
u16 vid;
u16 pvid;
@@ -997,8 +993,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
b53_get_vlan_entry(dev, vid, vl);
vl->members &= ~BIT(port);
- if ((vl->members & BIT(cpu_port)) == BIT(cpu_port))
- vl->members = 0;
if (pvid == vid) {
if (is5325(dev) || is5365(dev))
@@ -1007,18 +1001,14 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
pvid = 0;
}
- if (untagged) {
+ if (untagged)
vl->untag &= ~(BIT(port));
- if ((vl->untag & BIT(cpu_port)) == BIT(cpu_port))
- vl->untag = 0;
- }
b53_set_vlan_entry(dev, vid, vl);
b53_fast_age_vlan(dev, vid);
}
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
- b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port), pvid);
b53_fast_age_vlan(dev, pvid);
return 0;
@@ -1396,8 +1386,8 @@ static void b53_br_leave(struct dsa_switch *ds, int port)
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
} else {
b53_get_vlan_entry(dev, pvid, vl);
- vl->members |= BIT(port) | BIT(dev->cpu_port);
- vl->untag |= BIT(port) | BIT(dev->cpu_port);
+ vl->members |= BIT(port);
+ vl->untag |= BIT(port);
b53_set_vlan_entry(dev, pvid, vl);
}
}
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, bridge@lists.linux-foundation.org,
stephen@networkplumber.org, vivien.didelot@savoirfairelinux.com,
andrew@lunn.ch, jiri@mellanox.com, idosch@mellanox.com,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [RFC net-next 3/3] net: dsa: b53: Remove CPU port specific VLAN programming
Date: Mon, 21 Nov 2016 11:09:25 -0800 [thread overview]
Message-ID: <20161121190925.14530-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20161121190925.14530-1-f.fainelli@gmail.com>
Now that DSA calls into the switch driver to program the CPU port's VLAN
attributes, we can get rid of the code that dealt with adding/removing
the CPU port to a downstream facing port VLAN membership.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 7717b19dc806..6577286a2721 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -951,7 +951,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
- unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
u16 vid;
@@ -960,11 +959,11 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
b53_get_vlan_entry(dev, vid, vl);
- vl->members |= BIT(port) | BIT(cpu_port);
+ vl->members |= BIT(port);
if (untagged)
- vl->untag |= BIT(port) | BIT(cpu_port);
+ vl->untag |= BIT(port);
else
- vl->untag &= ~(BIT(port) | BIT(cpu_port));
+ vl->untag &= ~BIT(port);
b53_set_vlan_entry(dev, vid, vl);
b53_fast_age_vlan(dev, vid);
@@ -973,8 +972,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
if (pvid) {
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
vlan->vid_end);
- b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port),
- vlan->vid_end);
b53_fast_age_vlan(dev, vid);
}
}
@@ -984,7 +981,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
{
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
- unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
u16 vid;
u16 pvid;
@@ -997,8 +993,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
b53_get_vlan_entry(dev, vid, vl);
vl->members &= ~BIT(port);
- if ((vl->members & BIT(cpu_port)) == BIT(cpu_port))
- vl->members = 0;
if (pvid == vid) {
if (is5325(dev) || is5365(dev))
@@ -1007,18 +1001,14 @@ static int b53_vlan_del(struct dsa_switch *ds, int port,
pvid = 0;
}
- if (untagged) {
+ if (untagged)
vl->untag &= ~(BIT(port));
- if ((vl->untag & BIT(cpu_port)) == BIT(cpu_port))
- vl->untag = 0;
- }
b53_set_vlan_entry(dev, vid, vl);
b53_fast_age_vlan(dev, vid);
}
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
- b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port), pvid);
b53_fast_age_vlan(dev, pvid);
return 0;
@@ -1396,8 +1386,8 @@ static void b53_br_leave(struct dsa_switch *ds, int port)
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
} else {
b53_get_vlan_entry(dev, pvid, vl);
- vl->members |= BIT(port) | BIT(dev->cpu_port);
- vl->untag |= BIT(port) | BIT(dev->cpu_port);
+ vl->members |= BIT(port);
+ vl->untag |= BIT(port);
b53_set_vlan_entry(dev, pvid, vl);
}
}
--
2.9.3
next prev parent reply other threads:[~2016-11-21 19:09 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 19:09 [Bridge] [RFC net-next 0/3] net: bridge: Allow CPU port configuration Florian Fainelli
2016-11-21 19:09 ` Florian Fainelli
2016-11-21 19:09 ` [Bridge] [RFC net-next 1/3] net: bridge: Allow bridge master device to configure switch CPU port Florian Fainelli
2016-11-21 19:09 ` Florian Fainelli
2016-11-22 15:46 ` [Bridge] " Vivien Didelot
2016-11-22 15:46 ` Vivien Didelot
2016-11-24 1:49 ` [Bridge] " Toshiaki Makita
2016-11-24 1:49 ` Toshiaki Makita
2016-11-21 19:09 ` [Bridge] [RFC net-next 2/3] net: dsa: Propagate VLAN add/del to CPU port(s) Florian Fainelli
2016-11-21 19:09 ` Florian Fainelli
2016-11-22 16:50 ` [Bridge] " Vivien Didelot
2016-11-22 16:50 ` Vivien Didelot
2016-11-28 4:30 ` [Bridge] " Florian Fainelli
2016-11-28 4:30 ` Florian Fainelli
2016-11-21 19:09 ` Florian Fainelli [this message]
2016-11-21 19:09 ` [RFC net-next 3/3] net: dsa: b53: Remove CPU port specific VLAN programming Florian Fainelli
2016-11-22 12:49 ` [RFC net-next 0/3] net: bridge: Allow CPU port configuration Jiri Pirko
2016-11-22 15:29 ` [Bridge] " Vivien Didelot
2016-11-22 15:29 ` Vivien Didelot
2016-11-22 17:41 ` [Bridge] " Ido Schimmel
2016-11-22 17:41 ` Ido Schimmel
2016-11-22 17:48 ` Andrew Lunn
2016-11-22 22:08 ` Jiri Pirko
2016-11-23 0:24 ` [Bridge] " Florian Fainelli
2016-11-23 0:24 ` Florian Fainelli
2016-11-23 8:21 ` Jiri Pirko
2016-11-22 17:56 ` [Bridge] " Florian Fainelli
2016-11-22 17:56 ` Florian Fainelli
2016-11-23 13:48 ` [Bridge] " Ido Schimmel
2016-11-23 13:48 ` Ido Schimmel
2016-12-01 20:21 ` [Bridge] " Florian Fainelli
2016-12-01 20:21 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121190925.14530-4-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=idosch@mellanox.com \
--cc=jiri@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.