All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabien Parent <fparent@baylibre.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2
Date: Tue, 22 Nov 2016 18:13:31 +0100	[thread overview]
Message-ID: <20161122171333.30192-3-fparent@baylibre.com> (raw)
In-Reply-To: <20161122171333.30192-1-fparent@baylibre.com>

The SPL is unable to load u-boot because the DDR2 is not configured.
Configure the DDR2.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---

V1 -> V2

    * New patch

---
 include/configs/omapl138_lcdk.h | 42 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index ce3a8f4..2cdf892 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -31,6 +31,7 @@
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_DA850_PLL_INIT
+#define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 
@@ -80,6 +81,47 @@
 #define CONFIG_SYS_DA850_PLL1_PLLM     21
 
 /*
+ * DDR2 memory configuration
+ */
+#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
+					DV_DDR_PHY_EXT_STRBEN | \
+					(0x5 << DV_DDR_PHY_RD_LATENCY_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDBCR (		  \
+	(1 << DV_DDR_SDCR_DDR2EN_SHIFT)		| \
+	(1 << DV_DDR_SDCR_DDREN_SHIFT)		| \
+	(1 << DV_DDR_SDCR_SDRAMEN_SHIFT)	| \
+	(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT)	| \
+	(4 << DV_DDR_SDCR_CL_SHIFT)		| \
+	(3 << DV_DDR_SDCR_IBANK_SHIFT)		| \
+	(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
+
+/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
+#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
+
+#define CONFIG_SYS_DA850_DDR2_SDTIMR (		  \
+	(19 << DV_DDR_SDTMR1_RFC_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_RP_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_RCD_SHIFT)		| \
+	(2 << DV_DDR_SDTMR1_WR_SHIFT)		| \
+	(6 << DV_DDR_SDTMR1_RAS_SHIFT)		| \
+	(8 << DV_DDR_SDTMR1_RC_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_RRD_SHIFT)		| \
+	(1 << DV_DDR_SDTMR1_WTR_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (		  \
+	(7 << DV_DDR_SDTMR2_RASMAX_SHIFT)	| \
+	(2 << DV_DDR_SDTMR2_XP_SHIFT)		| \
+	(0 << DV_DDR_SDTMR2_ODT_SHIFT)		| \
+	(10 << DV_DDR_SDTMR2_XSNR_SHIFT)	| \
+	(199 << DV_DDR_SDTMR2_XSRD_SHIFT)	| \
+	(1 << DV_DDR_SDTMR2_RTP_SHIFT)		| \
+	(2 << DV_DDR_SDTMR2_CKE_SHIFT))
+
+#define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000492
+#define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
+
+/*
  * Serial Driver info
  */
 #define CONFIG_SYS_NS16550_SERIAL
-- 
2.10.2

  parent reply	other threads:[~2016-11-22 17:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-22 17:13 [U-Boot] [PATCH v2 0/4] davinci: omapl138_lcdk: fix a few bugs for SPL boot Fabien Parent
2016-11-22 17:13 ` [U-Boot] [PATCH v2 1/4] davinci: omapl138_lcdk: configure pll0 Fabien Parent
2016-11-22 18:03   ` Tom Rini
2016-11-22 17:13 ` Fabien Parent [this message]
2016-11-22 18:10   ` [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2 Tom Rini
2016-11-28 13:38     ` Fabien Parent
2016-11-28 15:05       ` Tom Rini
2016-11-22 17:13 ` [U-Boot] [PATCH v2 3/4] davinci: da850evm: fix empty boot method list in the SPL Fabien Parent
2016-11-22 17:13 ` [U-Boot] [PATCH v2 4/4] davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot Fabien Parent
2016-11-22 18:13   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161122171333.30192-3-fparent@baylibre.com \
    --to=fparent@baylibre.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.