From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/11] board: ti: dra71x-evm: Add epprom support
Date: Wed, 23 Nov 2016 13:25:24 +0530 [thread overview]
Message-ID: <20161123075534.1124-2-lokeshvutla@ti.com> (raw)
In-Reply-To: <20161123075534.1124-1-lokeshvutla@ti.com>
The dra71x-evm is a board based on TI's DRA718 processor targeting BOM-optimized
entry infotainment systems such as display audio and is a software compatible
derivative of the highly successful DRA74 and DRA72 processor families.
More information can be found here[1].
Add epprom detection for dra71-evm.
[1] http://www.ti.com/product/dra718
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
board/ti/dra7xx/evm.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index e0470e9..73d99ae 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -36,6 +36,7 @@
#define board_is_dra74x_evm() board_ti_is("5777xCPU")
#define board_is_dra72x_evm() board_ti_is("DRA72x-T")
+#define board_is_dra71x_evm() board_ti_is("DRA79x,D")
#define board_is_dra74x_revh_or_later() (board_is_dra74x_evm() && \
(strncmp("H", board_ti_get_rev(), 1) <= 0))
#define board_is_dra72x_revc_or_later() (board_is_dra72x_evm() && \
@@ -469,6 +470,8 @@ int board_late_init(void)
if (is_dra72x()) {
if (board_is_dra72x_revc_or_later())
name = "dra72x-revc";
+ else if (board_is_dra71x_evm())
+ name = "dra71x";
else
name = "dra72x";
} else {
@@ -509,6 +512,8 @@ void do_board_detect(void)
bname = "DRA74x EVM";
} else if (board_is_dra72x_evm()) {
bname = "DRA72x EVM";
+ } else if (board_is_dra71x_evm()) {
+ bname = "DRA71x EVM";
} else {
/* If EEPROM is not populated */
if (is_dra72x())
--
2.10.1
next prev parent reply other threads:[~2016-11-23 7:55 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 7:55 [U-Boot] [PATCH 00/11] ARM: ti: dra71: Add support for dra71-evm Lokesh Vutla
2016-11-23 7:55 ` Lokesh Vutla [this message]
2016-11-26 16:17 ` [U-Boot] [PATCH 01/11] board: ti: dra71x-evm: Add epprom support Tom Rini
2016-12-04 23:20 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 02/11] board: ti: dra71x-evm: Add mux settings Lokesh Vutla
2016-11-26 16:18 ` Tom Rini
2016-12-04 23:20 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 03/11] board: ti: dra72: Introduce optimization for rgmii timing for rev C Lokesh Vutla
2016-11-26 16:19 ` Tom Rini
2016-12-04 23:20 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 04/11] board: ti: dra71x-evm: Add PMIC support Lokesh Vutla
2016-11-26 16:19 ` Tom Rini
2016-12-04 23:21 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 05/11] ARM: OMAP4+: Add support for getting pbias info from board Lokesh Vutla
2016-11-26 16:23 ` Tom Rini
2016-12-04 23:22 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 06/11] ARM: dts: dra7xx: sync DT with latest Linux Lokesh Vutla
2016-11-26 16:23 ` Tom Rini
2016-12-04 23:22 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 07/11] ARM: dts: dra71x-evm: Add DT support Lokesh Vutla
2016-11-26 16:27 ` Tom Rini
2016-12-04 23:23 ` [U-Boot] [U-Boot,07/11] " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 08/11] configs: ti_omap5_common: Select dtb name for dra71x Lokesh Vutla
2016-11-26 16:28 ` Tom Rini
2016-12-04 23:25 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 09/11] configs: dra7xx: hs: Enable DM_ETH Lokesh Vutla
2016-11-26 16:29 ` Tom Rini
2016-12-04 23:25 ` [U-Boot] [U-Boot,09/11] " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 10/11] configs: dra7xx: Enable pmic/regulator options Lokesh Vutla
2016-11-26 16:29 ` Tom Rini
2016-12-04 23:25 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 11/11] configs: dra7xx: Enable lp873x options Lokesh Vutla
2016-11-26 16:30 ` Tom Rini
2016-12-04 23:26 ` [U-Boot] [U-Boot,11/11] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161123075534.1124-2-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.