From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 02/11] board: ti: dra71x-evm: Add mux settings
Date: Wed, 23 Nov 2016 13:25:25 +0530 [thread overview]
Message-ID: <20161123075534.1124-3-lokeshvutla@ti.com> (raw)
In-Reply-To: <20161123075534.1124-1-lokeshvutla@ti.com>
Add mux and iodelay settings for dra71x-evm.
Data generated using PCT_DRA71x_SR2.0_v1.0.0.0 version (June 2016).
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
board/ti/dra7xx/evm.c | 7 +-
board/ti/dra7xx/mux_data.h | 200 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 206 insertions(+), 1 deletion(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 73d99ae..b2ca75b 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -562,7 +562,12 @@ void recalibrate_iodelay(void)
case DRA722_ES2_0:
pads = dra72x_core_padconf_array_common;
npads = ARRAY_SIZE(dra72x_core_padconf_array_common);
- if (board_is_dra72x_revc_or_later()) {
+ if (board_is_dra71x_evm()) {
+ pads = dra71x_core_padconf_array;
+ npads = ARRAY_SIZE(dra71x_core_padconf_array);
+ iodelay = dra71_iodelay_cfg_array;
+ niodelays = ARRAY_SIZE(dra71_iodelay_cfg_array);
+ } else if (board_is_dra72x_revc_or_later()) {
delta_pads = dra72x_rgmii_padconf_array_revc;
delta_npads =
ARRAY_SIZE(dra72x_rgmii_padconf_array_revc);
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 34a05dd..d071b74 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -220,6 +220,157 @@ const struct pad_conf_entry dra72x_rgmii_padconf_array_revc[] = {
{XREF_CLK2, (M5 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.atl_clk2 */
};
+const struct pad_conf_entry dra71x_core_padconf_array[] = {
+ {GPMC_AD0, (M3 | PIN_INPUT)}, /* gpmc_ad0.vout3_d0 */
+ {GPMC_AD1, (M3 | PIN_INPUT)}, /* gpmc_ad1.vout3_d1 */
+ {GPMC_AD2, (M3 | PIN_INPUT)}, /* gpmc_ad2.vout3_d2 */
+ {GPMC_AD3, (M3 | PIN_INPUT)}, /* gpmc_ad3.vout3_d3 */
+ {GPMC_AD4, (M3 | PIN_INPUT)}, /* gpmc_ad4.vout3_d4 */
+ {GPMC_AD5, (M3 | PIN_INPUT)}, /* gpmc_ad5.vout3_d5 */
+ {GPMC_AD6, (M3 | PIN_INPUT)}, /* gpmc_ad6.vout3_d6 */
+ {GPMC_AD7, (M3 | PIN_INPUT)}, /* gpmc_ad7.vout3_d7 */
+ {GPMC_AD8, (M3 | PIN_INPUT)}, /* gpmc_ad8.vout3_d8 */
+ {GPMC_AD9, (M3 | PIN_INPUT)}, /* gpmc_ad9.vout3_d9 */
+ {GPMC_AD10, (M3 | PIN_INPUT)}, /* gpmc_ad10.vout3_d10 */
+ {GPMC_AD11, (M3 | PIN_INPUT)}, /* gpmc_ad11.vout3_d11 */
+ {GPMC_AD12, (M3 | PIN_INPUT)}, /* gpmc_ad12.vout3_d12 */
+ {GPMC_AD13, (M3 | PIN_INPUT)}, /* gpmc_ad13.vout3_d13 */
+ {GPMC_AD14, (M3 | PIN_INPUT)}, /* gpmc_ad14.vout3_d14 */
+ {GPMC_AD15, (M3 | PIN_INPUT)}, /* gpmc_ad15.vout3_d15 */
+ {GPMC_A0, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a0.vout3_d16 */
+ {GPMC_A1, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a1.vout3_d17 */
+ {GPMC_A2, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a2.vout3_d18 */
+ {GPMC_A3, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a3.vout3_d19 */
+ {GPMC_A4, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a4.vout3_d20 */
+ {GPMC_A5, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a5.vout3_d21 */
+ {GPMC_A6, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a6.vout3_d22 */
+ {GPMC_A7, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a7.vout3_d23 */
+ {GPMC_A8, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a8.vout3_hsync */
+ {GPMC_A9, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a9.vout3_vsync */
+ {GPMC_A10, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a10.vout3_de */
+ {GPMC_A11, (M14 | PIN_INPUT)}, /* gpmc_a11.gpio2_1 */
+ {GPMC_A13, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a13.qspi1_rtclk */
+ {GPMC_A14, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_a14.qspi1_d3 */
+ {GPMC_A15, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_a15.qspi1_d2 */
+ {GPMC_A16, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a16.qspi1_d0 */
+ {GPMC_A17, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a17.qspi1_d1 */
+ {GPMC_A18, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a18.qspi1_sclk */
+ {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a19.mmc2_dat4 */
+ {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a20.mmc2_dat5 */
+ {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a21.mmc2_dat6 */
+ {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a22.mmc2_dat7 */
+ {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a23.mmc2_clk */
+ {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a24.mmc2_dat0 */
+ {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a25.mmc2_dat1 */
+ {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a26.mmc2_dat2 */
+ {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a27.mmc2_dat3 */
+ {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_cs1.mmc2_cmd */
+ {GPMC_CS2, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_cs2.qspi1_cs0 */
+ {GPMC_CS3, (M3 | PIN_INPUT_PULLUP)}, /* gpmc_cs3.vout3_clk */
+ {VIN2A_CLK0, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE9)}, /* vin2a_clk0.vin2a_clk0 */
+ {VIN2A_FLD0, (M14 | PIN_INPUT)}, /* vin2a_fld0.gpio3_30 */
+ {VIN2A_HSYNC0, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE6)}, /* vin2a_hsync0.vin2a_hsync0 */
+ {VIN2A_VSYNC0, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE9)}, /* vin2a_vsync0.vin2a_vsync0 */
+ {VIN2A_D0, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)}, /* vin2a_d0.vin2a_d0 */
+ {VIN2A_D1, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)}, /* vin2a_d1.vin2a_d1 */
+ {VIN2A_D2, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)}, /* vin2a_d2.vin2a_d2 */
+ {VIN2A_D3, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE8)}, /* vin2a_d3.vin2a_d3 */
+ {VIN2A_D4, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE8)}, /* vin2a_d4.vin2a_d4 */
+ {VIN2A_D5, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE8)}, /* vin2a_d5.vin2a_d5 */
+ {VIN2A_D6, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE6)}, /* vin2a_d6.vin2a_d6 */
+ {VIN2A_D7, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE6)}, /* vin2a_d7.vin2a_d7 */
+ {VIN2A_D8, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE2)}, /* vin2a_d8.vin2a_d8 */
+ {VIN2A_D9, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE2)}, /* vin2a_d9.vin2a_d9 */
+ {VIN2A_D10, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE5)}, /* vin2a_d10.vin2a_d10 */
+ {VIN2A_D11, (M0 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE5)}, /* vin2a_d11.vin2a_d11 */
+ {VIN2A_D12, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d12.rgmii1_txc */
+ {VIN2A_D13, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d13.rgmii1_txctl */
+ {VIN2A_D14, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d14.rgmii1_txd3 */
+ {VIN2A_D15, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d15.rgmii1_txd2 */
+ {VIN2A_D16, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d16.rgmii1_txd1 */
+ {VIN2A_D17, (M3 | PIN_OUTPUT | MANUAL_MODE)}, /* vin2a_d17.rgmii1_txd0 */
+ {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d18.rgmii1_rxc */
+ {VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d19.rgmii1_rxctl */
+ {VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d20.rgmii1_rxd3 */
+ {VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d21.rgmii1_rxd2 */
+ {VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d22.rgmii1_rxd1 */
+ {VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d23.rgmii1_rxd0 */
+ {VOUT1_D2, (M0 | PIN_INPUT_PULLDOWN)}, /* N/A.N/A */
+ {VOUT1_D10, (M0 | PIN_INPUT_PULLDOWN)}, /* N/A.N/A */
+ {VOUT1_D18, (M0 | PIN_INPUT_PULLDOWN)}, /* N/A.N/A */
+ {MDIO_MCLK, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mdio_mclk.mdio_mclk */
+ {MDIO_D, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mdio_d.mdio_d */
+ {RGMII0_TXC, (M0 | PIN_OUTPUT | MANUAL_MODE)}, /* rgmii0_txc.rgmii0_txc */
+ {RGMII0_TXCTL, (M0 | PIN_OUTPUT | MANUAL_MODE)}, /* rgmii0_txctl.rgmii0_txctl */
+ {RGMII0_TXD3, (M0 | PIN_OUTPUT | MANUAL_MODE)}, /* rgmii0_txd3.rgmii0_txd3 */
+ {RGMII0_TXD2, (M0 | PIN_OUTPUT | MANUAL_MODE)}, /* rgmii0_txd2.rgmii0_txd2 */
+ {RGMII0_TXD1, (M0 | PIN_OUTPUT | MANUAL_MODE)}, /* rgmii0_txd1.rgmii0_txd1 */
+ {RGMII0_TXD0, (M0 | PIN_OUTPUT | MANUAL_MODE)}, /* rgmii0_txd0.rgmii0_txd0 */
+ {RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxc.rgmii0_rxc */
+ {RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxctl.rgmii0_rxctl */
+ {RGMII0_RXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd3.rgmii0_rxd3 */
+ {RGMII0_RXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd2.rgmii0_rxd2 */
+ {RGMII0_RXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd1.rgmii0_rxd1 */
+ {RGMII0_RXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd0.rgmii0_rxd0 */
+ {USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb1_drvvbus.usb1_drvvbus */
+ {USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb2_drvvbus.usb2_drvvbus */
+ {GPIO6_14, (M9 | PIN_INPUT_PULLUP)}, /* gpio6_14.i2c3_sda */
+ {GPIO6_15, (M9 | PIN_INPUT_PULLUP)}, /* gpio6_15.i2c3_scl */
+ {GPIO6_16, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_16.gpio6_16 */
+ {XREF_CLK2, (M5 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.atl_clk2 */
+ {MCASP1_ACLKX, (M14 | PIN_INPUT)}, /* mcasp1_aclkx.gpio7_31 */
+ {MCASP1_FSX, (M14 | 0x000d0000)}, /* mcasp1_fsx.gpio7_30 */
+ {MCASP1_AXR0, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr0.i2c5_sda */
+ {MCASP1_AXR1, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr1.i2c5_scl */
+ {MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */
+ {MCASP1_AXR3, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr3.gpio5_5 */
+ {MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */
+ {MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */
+ {MCASP1_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr6.gpio5_8 */
+ {MCASP1_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr7.gpio5_9 */
+ {MCASP1_AXR12, (M1 | PIN_INPUT_SLEW | VIRTUAL_MODE10)}, /* mcasp1_axr12.mcasp7_axr0 */
+ {MCASP1_AXR13, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.mcasp7_axr1 */
+ {MCASP1_AXR14, (M1 | PIN_INPUT_SLEW | VIRTUAL_MODE10)}, /* mcasp1_axr14.mcasp7_aclkx */
+ {MCASP1_AXR15, (M1 | PIN_INPUT_SLEW | VIRTUAL_MODE10)}, /* mcasp1_axr15.mcasp7_fsx */
+ {MCASP3_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.mcasp3_aclkx */
+ {MCASP3_FSX, (M0 | PIN_INPUT_SLEW)}, /* mcasp3_fsx.mcasp3_fsx */
+ {MCASP3_AXR0, (M0 | PIN_INPUT_SLEW)}, /* mcasp3_axr0.mcasp3_axr0 */
+ {MCASP3_AXR1, (M0 | PIN_INPUT_SLEW | VIRTUAL_MODE6)}, /* mcasp3_axr1.mcasp3_axr1 */
+ {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_clk.mmc1_clk */
+ {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_cmd.mmc1_cmd */
+ {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat0.mmc1_dat0 */
+ {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat1.mmc1_dat1 */
+ {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat2.mmc1_dat2 */
+ {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */
+ {MMC1_SDCD, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mmc1_sdcd.gpio6_27 */
+ {MMC1_SDWP, (M14 | PIN_INPUT_SLEW)}, /* mmc1_sdwp.gpio6_28 */
+ {SPI1_SCLK, (M0 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.spi1_sclk */
+ {SPI1_D1, (M0 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.spi1_d1 */
+ {SPI1_D0, (M0 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.spi1_d0 */
+ {SPI1_CS0, (M0 | PIN_INPUT_PULLUP)}, /* spi1_cs0.spi1_cs0 */
+ {SPI1_CS1, (M14 | PIN_INPUT_PULLUP)}, /* spi1_cs1.gpio7_11 */
+ {SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_cs2.gpio7_12 */
+ {SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi1_cs3.hdmi1_cec */
+ {SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)}, /* spi2_sclk.uart3_rxd */
+ {SPI2_D1, (M1 | PIN_INPUT_SLEW)}, /* spi2_d1.uart3_txd */
+ {SPI2_D0, (M1 | PIN_INPUT_SLEW)}, /* spi2_d0.uart3_ctsn */
+ {SPI2_CS0, (M1 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi2_cs0.uart3_rtsn */
+ {DCAN1_TX, (M15 | PULL_UP)}, /* dcan1_tx.safe for dcan1_tx */
+ {DCAN1_RX, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* dcan1_rx.gpio1_15 */
+ {UART1_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* uart1_rxd.uart1_rxd */
+ {UART1_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* uart1_txd.uart1_txd */
+ {UART1_CTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart1_ctsn.mmc4_clk */
+ {UART1_RTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart1_rtsn.mmc4_cmd */
+ {UART2_RXD, (M3 | PIN_INPUT_PULLUP)}, /* uart2_rxd.mmc4_dat0 */
+ {UART2_TXD, (M3 | PIN_INPUT_PULLUP)}, /* uart2_txd.mmc4_dat1 */
+ {UART2_CTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart2_ctsn.mmc4_dat2 */
+ {UART2_RTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart2_rtsn.mmc4_dat3 */
+ {I2C2_SDA, (M1 | PIN_INPUT_PULLUP)}, /* i2c2_sda.hdmi1_ddc_scl */
+ {I2C2_SCL, (M1 | PIN_INPUT_PULLUP)}, /* i2c2_scl.hdmi1_ddc_sda */
+ {WAKEUP0, (M15 | PULL_UP)}, /* Wakeup0.safe for dcan1_rx */
+ {WAKEUP3, (M1 | PULL_ENA | PULL_UP)}, /* Wakeup3.sys_nirq1 */
+};
+
const struct pad_conf_entry early_padconf[] = {
#if (CONFIG_CONS_INDEX == 1)
{UART1_RXD, (PIN_INPUT_SLEW | M0)}, /* UART1_RXD */
@@ -280,6 +431,55 @@ const struct iodelay_cfg_entry dra72_iodelay_cfg_array_revc[] = {
{0x0374, 0, 0}, /* CFG_GPMC_CS2_OUT */
};
+const struct iodelay_cfg_entry dra71_iodelay_cfg_array[] = {
+ {0x0144, 0, 0}, /* CFG_GPMC_A13_IN */
+ {0x0150, 2247, 1186}, /* CFG_GPMC_A14_IN */
+ {0x015C, 2176, 1197}, /* CFG_GPMC_A15_IN */
+ {0x0168, 2229, 1268}, /* CFG_GPMC_A16_IN */
+ {0x0170, 0, 0}, /* CFG_GPMC_A16_OUT */
+ {0x0174, 2251, 1217}, /* CFG_GPMC_A17_IN */
+ {0x0188, 0, 0}, /* CFG_GPMC_A18_OUT */
+ {0x0374, 0, 0}, /* CFG_GPMC_CS2_OUT */
+ {0x06F0, 413, 0}, /* CFG_RGMII0_RXC_IN */
+ {0x06FC, 27, 2296}, /* CFG_RGMII0_RXCTL_IN */
+ {0x0708, 3, 1721}, /* CFG_RGMII0_RXD0_IN */
+ {0x0714, 134, 1786}, /* CFG_RGMII0_RXD1_IN */
+ {0x0720, 40, 1966}, /* CFG_RGMII0_RXD2_IN */
+ {0x072C, 0, 2057}, /* CFG_RGMII0_RXD3_IN */
+ {0x0740, 0, 60}, /* CFG_RGMII0_TXC_OUT */
+ {0x074C, 0, 60}, /* CFG_RGMII0_TXCTL_OUT */
+ {0x0758, 0, 60}, /* CFG_RGMII0_TXD0_OUT */
+ {0x0764, 0, 0}, /* CFG_RGMII0_TXD1_OUT */
+ {0x0770, 0, 60}, /* CFG_RGMII0_TXD2_OUT */
+ {0x077C, 0, 120}, /* CFG_RGMII0_TXD3_OUT */
+ {0x0A38, 0, 0}, /* CFG_VIN2A_CLK0_IN */
+ {0x0A44, 1936, 0}, /* CFG_VIN2A_D0_IN */
+ {0x0A50, 2031, 0}, /* CFG_VIN2A_D10_IN */
+ {0x0A5C, 1702, 0}, /* CFG_VIN2A_D11_IN */
+ {0x0A70, 0, 0}, /* CFG_VIN2A_D12_OUT */
+ {0x0A7C, 170, 0}, /* CFG_VIN2A_D13_OUT */
+ {0x0A88, 150, 0}, /* CFG_VIN2A_D14_OUT */
+ {0x0A94, 0, 0}, /* CFG_VIN2A_D15_OUT */
+ {0x0AA0, 60, 0}, /* CFG_VIN2A_D16_OUT */
+ {0x0AAC, 60, 0}, /* CFG_VIN2A_D17_OUT */
+ {0x0AB0, 530, 0}, /* CFG_VIN2A_D18_IN */
+ {0x0ABC, 71, 1099}, /* CFG_VIN2A_D19_IN */
+ {0x0AC8, 2229, 10}, /* CFG_VIN2A_D1_IN */
+ {0x0AD4, 142, 1337}, /* CFG_VIN2A_D20_IN */
+ {0x0AE0, 114, 1517}, /* CFG_VIN2A_D21_IN */
+ {0x0AEC, 171, 1331}, /* CFG_VIN2A_D22_IN */
+ {0x0AF8, 0, 1328}, /* CFG_VIN2A_D23_IN */
+ {0x0B04, 1736, 0}, /* CFG_VIN2A_D2_IN */
+ {0x0B10, 1943, 0}, /* CFG_VIN2A_D3_IN */
+ {0x0B1C, 1601, 0}, /* CFG_VIN2A_D4_IN */
+ {0x0B28, 2052, 0}, /* CFG_VIN2A_D5_IN */
+ {0x0B34, 1571, 0}, /* CFG_VIN2A_D6_IN */
+ {0x0B40, 1855, 0}, /* CFG_VIN2A_D7_IN */
+ {0x0B4C, 1224, 618}, /* CFG_VIN2A_D8_IN */
+ {0x0B58, 1373, 509}, /* CFG_VIN2A_D9_IN */
+ {0x0B7C, 1943, 0}, /* CFG_VIN2A_HSYNC0_IN */
+ {0x0B88, 1612, 0}, /* CFG_VIN2A_VSYNC0_IN */
+};
#endif
const struct pad_conf_entry dra74x_core_padconf_array[] = {
--
2.10.1
next prev parent reply other threads:[~2016-11-23 7:55 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 7:55 [U-Boot] [PATCH 00/11] ARM: ti: dra71: Add support for dra71-evm Lokesh Vutla
2016-11-23 7:55 ` [U-Boot] [PATCH 01/11] board: ti: dra71x-evm: Add epprom support Lokesh Vutla
2016-11-26 16:17 ` Tom Rini
2016-12-04 23:20 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` Lokesh Vutla [this message]
2016-11-26 16:18 ` [U-Boot] [PATCH 02/11] board: ti: dra71x-evm: Add mux settings Tom Rini
2016-12-04 23:20 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 03/11] board: ti: dra72: Introduce optimization for rgmii timing for rev C Lokesh Vutla
2016-11-26 16:19 ` Tom Rini
2016-12-04 23:20 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 04/11] board: ti: dra71x-evm: Add PMIC support Lokesh Vutla
2016-11-26 16:19 ` Tom Rini
2016-12-04 23:21 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 05/11] ARM: OMAP4+: Add support for getting pbias info from board Lokesh Vutla
2016-11-26 16:23 ` Tom Rini
2016-12-04 23:22 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 06/11] ARM: dts: dra7xx: sync DT with latest Linux Lokesh Vutla
2016-11-26 16:23 ` Tom Rini
2016-12-04 23:22 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 07/11] ARM: dts: dra71x-evm: Add DT support Lokesh Vutla
2016-11-26 16:27 ` Tom Rini
2016-12-04 23:23 ` [U-Boot] [U-Boot,07/11] " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 08/11] configs: ti_omap5_common: Select dtb name for dra71x Lokesh Vutla
2016-11-26 16:28 ` Tom Rini
2016-12-04 23:25 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 09/11] configs: dra7xx: hs: Enable DM_ETH Lokesh Vutla
2016-11-26 16:29 ` Tom Rini
2016-12-04 23:25 ` [U-Boot] [U-Boot,09/11] " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 10/11] configs: dra7xx: Enable pmic/regulator options Lokesh Vutla
2016-11-26 16:29 ` Tom Rini
2016-12-04 23:25 ` [U-Boot] [U-Boot, " Tom Rini
2016-11-23 7:55 ` [U-Boot] [PATCH 11/11] configs: dra7xx: Enable lp873x options Lokesh Vutla
2016-11-26 16:30 ` Tom Rini
2016-12-04 23:26 ` [U-Boot] [U-Boot,11/11] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161123075534.1124-3-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.