From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64: dts: zx: add pcu_domain node for zx296718
Date: Mon, 5 Dec 2016 16:54:13 +0800 [thread overview]
Message-ID: <20161205085411.GB2749@dragon> (raw)
In-Reply-To: <1480925871-20855-1-git-send-email-baoyou.xie@linaro.org>
On Mon, Dec 05, 2016 at 04:17:51PM +0800, Baoyou Xie wrote:
> This patch adds the pcu_domain node, so it can be used
> by zte-soc's power domain driver.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
I'm fine with the patch itself, but I need to wait the driver and
bindings being accepted to apply it.
Shawn
> ---
> arch/arm64/boot/dts/zte/zx296718.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index b44d1d1..1aa0587 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -302,6 +302,11 @@
> reg = <0x116000 0x1000>;
> };
>
> + pcu_domain: pcu at 117000 {
> + compatible = "zte,zx296718-pcu";
> + reg = <0x00117000 0x1000>;
> + };
> +
> uart0: uart at 11f000 {
> compatible = "arm,pl011", "arm,primecell";
> arm,primecell-periphid = <0x001feffe>;
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Baoyou Xie <baoyou.xie@linaro.org>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
catalin.marinas@arm.com, xie.baoyou@zte.com.cn,
will.deacon@arm.com, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, chen.chaokai@zte.com.cn,
viresh.kumar@linaro.org, wang.qiang01@zte.com.cn,
jun.nie@linaro.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] arm64: dts: zx: add pcu_domain node for zx296718
Date: Mon, 5 Dec 2016 16:54:13 +0800 [thread overview]
Message-ID: <20161205085411.GB2749@dragon> (raw)
In-Reply-To: <1480925871-20855-1-git-send-email-baoyou.xie@linaro.org>
On Mon, Dec 05, 2016 at 04:17:51PM +0800, Baoyou Xie wrote:
> This patch adds the pcu_domain node, so it can be used
> by zte-soc's power domain driver.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
I'm fine with the patch itself, but I need to wait the driver and
bindings being accepted to apply it.
Shawn
> ---
> arch/arm64/boot/dts/zte/zx296718.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index b44d1d1..1aa0587 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -302,6 +302,11 @@
> reg = <0x116000 0x1000>;
> };
>
> + pcu_domain: pcu@117000 {
> + compatible = "zte,zx296718-pcu";
> + reg = <0x00117000 0x1000>;
> + };
> +
> uart0: uart@11f000 {
> compatible = "arm,pl011", "arm,primecell";
> arm,primecell-periphid = <0x001feffe>;
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Baoyou Xie <baoyou.xie@linaro.org>
Cc: jun.nie@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
xie.baoyou@zte.com.cn, chen.chaokai@zte.com.cn,
wang.qiang01@zte.com.cn
Subject: Re: [PATCH v2] arm64: dts: zx: add pcu_domain node for zx296718
Date: Mon, 5 Dec 2016 16:54:13 +0800 [thread overview]
Message-ID: <20161205085411.GB2749@dragon> (raw)
In-Reply-To: <1480925871-20855-1-git-send-email-baoyou.xie@linaro.org>
On Mon, Dec 05, 2016 at 04:17:51PM +0800, Baoyou Xie wrote:
> This patch adds the pcu_domain node, so it can be used
> by zte-soc's power domain driver.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
I'm fine with the patch itself, but I need to wait the driver and
bindings being accepted to apply it.
Shawn
> ---
> arch/arm64/boot/dts/zte/zx296718.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index b44d1d1..1aa0587 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -302,6 +302,11 @@
> reg = <0x116000 0x1000>;
> };
>
> + pcu_domain: pcu@117000 {
> + compatible = "zte,zx296718-pcu";
> + reg = <0x00117000 0x1000>;
> + };
> +
> uart0: uart@11f000 {
> compatible = "arm,pl011", "arm,primecell";
> arm,primecell-periphid = <0x001feffe>;
> --
> 2.7.4
>
next prev parent reply other threads:[~2016-12-05 8:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 8:17 [PATCH v2] arm64: dts: zx: add pcu_domain node for zx296718 Baoyou Xie
2016-12-05 8:17 ` Baoyou Xie
2016-12-05 8:17 ` Baoyou Xie
2016-12-05 8:54 ` Shawn Guo [this message]
2016-12-05 8:54 ` Shawn Guo
2016-12-05 8:54 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161205085411.GB2749@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.