* [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: update for latest default env
@ 2016-12-01 12:29 Jacob Stiffler
2016-12-01 12:29 ` [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: " Jacob Stiffler
2016-12-06 3:54 ` [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: " Denys Dmytriyenko
0 siblings, 2 replies; 6+ messages in thread
From: Jacob Stiffler @ 2016-12-01 12:29 UTC (permalink / raw)
To: meta-arago
* Latest default environment requires the the 'devtype' variable is
set for loading images such as the kernel.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
---
setup-uboot-env-am335x.sh | 4 ++--
setup-uboot-env-am43x.sh | 4 ++--
setup-uboot-env-am57xx-evm.sh | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/setup-uboot-env-am335x.sh b/setup-uboot-env-am335x.sh
index 1a65d5b..ba75b14 100644
--- a/setup-uboot-env-am335x.sh
+++ b/setup-uboot-env-am335x.sh
@@ -211,7 +211,7 @@ else
do_expect "\"$prompt\"" "send \"setenv ip_method dhcp\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
else
@@ -219,7 +219,7 @@ else
do_expect "\"$prompt\"" "send \"setenv ip_method none\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
diff --git a/setup-uboot-env-am43x.sh b/setup-uboot-env-am43x.sh
index b93b371..f7f2d95 100644
--- a/setup-uboot-env-am43x.sh
+++ b/setup-uboot-env-am43x.sh
@@ -168,7 +168,7 @@ else
do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv devtype mmc\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'setenv devnum \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
else
@@ -177,7 +177,7 @@ else
do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv devtype mmc\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'setenv devnum \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
diff --git a/setup-uboot-env-am57xx-evm.sh b/setup-uboot-env-am57xx-evm.sh
index 4988b96..574c111 100644
--- a/setup-uboot-env-am57xx-evm.sh
+++ b/setup-uboot-env-am57xx-evm.sh
@@ -178,7 +178,7 @@ else
do_expect "\"$prompt\"" "send \"setenv ip_method dhcp\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'mmc dev \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
else
@@ -186,7 +186,7 @@ else
do_expect "\"$prompt\"" "send \"setenv ip_method none\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'mmc dev \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: update for latest default env
2016-12-01 12:29 [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: update for latest default env Jacob Stiffler
@ 2016-12-01 12:29 ` Jacob Stiffler
2016-12-06 3:55 ` Denys Dmytriyenko
2016-12-06 3:54 ` [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: " Denys Dmytriyenko
1 sibling, 1 reply; 6+ messages in thread
From: Jacob Stiffler @ 2016-12-01 12:29 UTC (permalink / raw)
To: meta-arago
* We now need to call "findfdt" so that "name_fdt" is defined.
Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
---
setup-uboot-env-k2g-evm.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
index f41d278..c80e506 100755
--- a/setup-uboot-env-k2g-evm.sh
+++ b/setup-uboot-env-k2g-evm.sh
@@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi $ubifsimage\"" $cwd/setupBoard.m
do_expect "\"$prompt\"" "send \"setenv name_kern $kernelimage\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv name_uboot $ubootimage\"" $cwd/setupBoard.minicom
-do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc get_fdt_\${kern_mode} get_mon_\${kern_mode} get_kern_\${kern_mode} run_mon run_kern'\"" $cwd/setupBoard.minicom
+do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: update for latest default env
2016-12-01 12:29 ` [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: " Jacob Stiffler
@ 2016-12-06 3:55 ` Denys Dmytriyenko
2016-12-06 12:18 ` Stiffler, Jacob
0 siblings, 1 reply; 6+ messages in thread
From: Denys Dmytriyenko @ 2016-12-06 3:55 UTC (permalink / raw)
To: Jacob Stiffler; +Cc: meta-arago
On Thu, Dec 01, 2016 at 07:29:52AM -0500, Jacob Stiffler wrote:
> * We now need to call "findfdt" so that "name_fdt" is defined.
>
> Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Acked-by: Denys Dmytriyenko <denys@ti.com>
Please push both of these in.
> ---
> setup-uboot-env-k2g-evm.sh | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
> index f41d278..c80e506 100755
> --- a/setup-uboot-env-k2g-evm.sh
> +++ b/setup-uboot-env-k2g-evm.sh
> @@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi $ubifsimage\"" $cwd/setupBoard.m
> do_expect "\"$prompt\"" "send \"setenv name_kern $kernelimage\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv name_uboot $ubootimage\"" $cwd/setupBoard.minicom
>
> -do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc get_fdt_\${kern_mode} get_mon_\${kern_mode} get_kern_\${kern_mode} run_mon run_kern'\"" $cwd/setupBoard.minicom
> +do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
>
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
>
> --
> 1.9.1
>
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: update for latest default env
2016-12-06 3:55 ` Denys Dmytriyenko
@ 2016-12-06 12:18 ` Stiffler, Jacob
2016-12-06 19:30 ` Denys Dmytriyenko
0 siblings, 1 reply; 6+ messages in thread
From: Stiffler, Jacob @ 2016-12-06 12:18 UTC (permalink / raw)
To: Dmytriyenko, Denys; +Cc: meta-arago@arago-project.org
> -----Original Message-----
> From: Dmytriyenko, Denys
> Sent: Monday, December 05, 2016 10:56 PM
> To: Stiffler, Jacob
> Cc: meta-arago@arago-project.org
> Subject: Re: [meta-arago] [tisdk-setup-scripts][PATCH 2/2] setup-uboot-
> env-k2g-evm.sh: update for latest default env
>
> On Thu, Dec 01, 2016 at 07:29:52AM -0500, Jacob Stiffler wrote:
> > * We now need to call "findfdt" so that "name_fdt" is defined.
> >
> > Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
>
> Acked-by: Denys Dmytriyenko <denys@ti.com>
>
>
> Please push both of these in.
>
Should I add the "Acked-by" in the commit message?
>
> > ---
> > setup-uboot-env-k2g-evm.sh | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
> > index f41d278..c80e506 100755
> > --- a/setup-uboot-env-k2g-evm.sh
> > +++ b/setup-uboot-env-k2g-evm.sh
> > @@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi
> $ubifsimage\"" $cwd/setupBoard.m
> > do_expect "\"$prompt\"" "send \"setenv name_kern $kernelimage\""
> $cwd/setupBoard.minicom
> > do_expect "\"$prompt\"" "send \"setenv name_uboot $ubootimage\""
> $cwd/setupBoard.minicom
> >
> > -do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc
> get_fdt_\${kern_mode} get_mon_\${kern_mode} get_kern_\${kern_mode}
> run_mon run_kern'\"" $cwd/setupBoard.minicom
> > +do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc
> get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode}
> get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
> >
> > do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> >
> > --
> > 1.9.1
> >
> > _______________________________________________
> > meta-arago mailing list
> > meta-arago@arago-project.org
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: update for latest default env
2016-12-06 12:18 ` Stiffler, Jacob
@ 2016-12-06 19:30 ` Denys Dmytriyenko
0 siblings, 0 replies; 6+ messages in thread
From: Denys Dmytriyenko @ 2016-12-06 19:30 UTC (permalink / raw)
To: Stiffler, Jacob; +Cc: meta-arago@arago-project.org
On Tue, Dec 06, 2016 at 07:18:21AM -0500, Stiffler, Jacob wrote:
>
>
> > -----Original Message-----
> > From: Dmytriyenko, Denys
> > Sent: Monday, December 05, 2016 10:56 PM
> > To: Stiffler, Jacob
> > Cc: meta-arago@arago-project.org
> > Subject: Re: [meta-arago] [tisdk-setup-scripts][PATCH 2/2] setup-uboot-
> > env-k2g-evm.sh: update for latest default env
> >
> > On Thu, Dec 01, 2016 at 07:29:52AM -0500, Jacob Stiffler wrote:
> > > * We now need to call "findfdt" so that "name_fdt" is defined.
> > >
> > > Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
> >
> > Acked-by: Denys Dmytriyenko <denys@ti.com>
> >
> >
> > Please push both of these in.
> >
>
> Should I add the "Acked-by" in the commit message?
If you use Patchwork, you can just grab "mbox" formatted patch from there and
it will have all the collected Acks or SoBs for you ready to apply.
--
Denys
> > > ---
> > > setup-uboot-env-k2g-evm.sh | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
> > > index f41d278..c80e506 100755
> > > --- a/setup-uboot-env-k2g-evm.sh
> > > +++ b/setup-uboot-env-k2g-evm.sh
> > > @@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi
> > $ubifsimage\"" $cwd/setupBoard.m
> > > do_expect "\"$prompt\"" "send \"setenv name_kern $kernelimage\""
> > $cwd/setupBoard.minicom
> > > do_expect "\"$prompt\"" "send \"setenv name_uboot $ubootimage\""
> > $cwd/setupBoard.minicom
> > >
> > > -do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> > init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc
> > get_fdt_\${kern_mode} get_mon_\${kern_mode} get_kern_\${kern_mode}
> > run_mon run_kern'\"" $cwd/setupBoard.minicom
> > > +do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> > init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc
> > get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode}
> > get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
> > >
> > > do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> > >
> > > --
> > > 1.9.1
> > >
> > > _______________________________________________
> > > meta-arago mailing list
> > > meta-arago@arago-project.org
> > > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: update for latest default env
2016-12-01 12:29 [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: update for latest default env Jacob Stiffler
2016-12-01 12:29 ` [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: " Jacob Stiffler
@ 2016-12-06 3:54 ` Denys Dmytriyenko
1 sibling, 0 replies; 6+ messages in thread
From: Denys Dmytriyenko @ 2016-12-06 3:54 UTC (permalink / raw)
To: Jacob Stiffler; +Cc: meta-arago
On Thu, Dec 01, 2016 at 07:29:51AM -0500, Jacob Stiffler wrote:
> * Latest default environment requires the the 'devtype' variable is
> set for loading images such as the kernel.
>
> Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Acked-by: Denys Dmytriyenko <denys@ti.com>
> ---
> setup-uboot-env-am335x.sh | 4 ++--
> setup-uboot-env-am43x.sh | 4 ++--
> setup-uboot-env-am57xx-evm.sh | 4 ++--
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/setup-uboot-env-am335x.sh b/setup-uboot-env-am335x.sh
> index 1a65d5b..ba75b14 100644
> --- a/setup-uboot-env-am335x.sh
> +++ b/setup-uboot-env-am335x.sh
> @@ -211,7 +211,7 @@ else
> do_expect "\"$prompt\"" "send \"setenv ip_method dhcp\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
> - do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> + do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
> else
> @@ -219,7 +219,7 @@ else
> do_expect "\"$prompt\"" "send \"setenv ip_method none\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
> - do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> + do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
>
> diff --git a/setup-uboot-env-am43x.sh b/setup-uboot-env-am43x.sh
> index b93b371..f7f2d95 100644
> --- a/setup-uboot-env-am43x.sh
> +++ b/setup-uboot-env-am43x.sh
> @@ -168,7 +168,7 @@ else
> do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv devtype mmc\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv getuenv 'setenv devnum \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
> - do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> + do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
> else
> @@ -177,7 +177,7 @@ else
> do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv devtype mmc\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv getuenv 'setenv devnum \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
> - do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> + do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
>
> diff --git a/setup-uboot-env-am57xx-evm.sh b/setup-uboot-env-am57xx-evm.sh
> index 4988b96..574c111 100644
> --- a/setup-uboot-env-am57xx-evm.sh
> +++ b/setup-uboot-env-am57xx-evm.sh
> @@ -178,7 +178,7 @@ else
> do_expect "\"$prompt\"" "send \"setenv ip_method dhcp\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv getuenv 'mmc dev \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
> - do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> + do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
> else
> @@ -186,7 +186,7 @@ else
> do_expect "\"$prompt\"" "send \"setenv ip_method none\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"setenv getuenv 'mmc dev \${mmcdev}; if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
> - do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> + do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
>
> --
> 1.9.1
>
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-12-06 19:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-01 12:29 [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: update for latest default env Jacob Stiffler
2016-12-01 12:29 ` [tisdk-setup-scripts][PATCH 2/2] setup-uboot-env-k2g-evm.sh: " Jacob Stiffler
2016-12-06 3:55 ` Denys Dmytriyenko
2016-12-06 12:18 ` Stiffler, Jacob
2016-12-06 19:30 ` Denys Dmytriyenko
2016-12-06 3:54 ` [tisdk-setup-scripts][PATCH 1/2] setup-uboot-env: am335x, am437x, am57xx: " Denys Dmytriyenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.