From: zajec5@gmail.com (Rafał Miłecki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 5/5] ARM: BCM53573: Specify USB ports of on-SoC controllers
Date: Wed, 7 Dec 2016 08:56:55 +0100 [thread overview]
Message-ID: <20161207075655.7396-5-zajec5@gmail.com> (raw)
In-Reply-To: <20161207075655.7396-1-zajec5@gmail.com>
From: Rafa? Mi?ecki <rafal@milecki.pl>
Broadcom OHCI and EHCI controllers always have 2 ports each on the root
hub. Describe them in DT to allow specifying extra info or referencing
port nodes.
Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index e2c496a..2da04d0 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -124,6 +124,17 @@
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port at 1 {
+ reg = <1>;
+ };
+
+ ehci_port2: port at 2 {
+ reg = <2>;
+ };
};
ohci: ohci at d000 {
@@ -133,6 +144,17 @@
reg = <0xd000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port at 1 {
+ reg = <1>;
+ };
+
+ ohci_port2: port at 2 {
+ reg = <2>;
+ };
};
};
--
2.10.1
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "Arnd Bergmann" <arnd-r2nGTMty4D4@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Russell King" <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
"Hauke Mehrtens" <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Rafał Miłecki" <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
Subject: [PATCH V2 5/5] ARM: BCM53573: Specify USB ports of on-SoC controllers
Date: Wed, 7 Dec 2016 08:56:55 +0100 [thread overview]
Message-ID: <20161207075655.7396-5-zajec5@gmail.com> (raw)
In-Reply-To: <20161207075655.7396-1-zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
Broadcom OHCI and EHCI controllers always have 2 ports each on the root
hub. Describe them in DT to allow specifying extra info or referencing
port nodes.
Signed-off-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
---
arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index e2c496a..2da04d0 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -124,6 +124,17 @@
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ };
};
ohci: ohci@d000 {
@@ -133,6 +144,17 @@
reg = <0xd000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ };
};
};
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: "Arnd Bergmann" <arnd@arndb.de>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Russell King" <linux@armlinux.org.uk>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 5/5] ARM: BCM53573: Specify USB ports of on-SoC controllers
Date: Wed, 7 Dec 2016 08:56:55 +0100 [thread overview]
Message-ID: <20161207075655.7396-5-zajec5@gmail.com> (raw)
In-Reply-To: <20161207075655.7396-1-zajec5@gmail.com>
From: Rafał Miłecki <rafal@milecki.pl>
Broadcom OHCI and EHCI controllers always have 2 ports each on the root
hub. Describe them in DT to allow specifying extra info or referencing
port nodes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index e2c496a..2da04d0 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -124,6 +124,17 @@
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ };
};
ohci: ohci@d000 {
@@ -133,6 +144,17 @@
reg = <0xd000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ };
};
};
--
2.10.1
next prev parent reply other threads:[~2016-12-07 7:56 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-07 7:56 [PATCH V2 1/5] ARM: BCM5301X: Fix LAN LED labels for Luxul XWR-3100 Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
2016-12-07 7:56 ` [PATCH V2 2/5] ARM: BCM5301X: Specify USB controllers in DT Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
2016-12-07 17:19 ` Ray Jui
2016-12-07 17:19 ` Ray Jui
2016-12-07 17:19 ` Ray Jui
2016-12-07 7:56 ` [PATCH V2 3/5] ARM: BCM5301X: Set GPIO enabling USB power on Netgear R7000 Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
2016-12-07 7:56 ` [PATCH V2 4/5] ARM: BCM5301X: Specify all RAM by including an extra block Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
2016-12-07 19:26 ` Jon Mason
2016-12-07 19:26 ` Jon Mason
2016-12-07 19:26 ` Jon Mason
2016-12-07 7:56 ` Rafał Miłecki [this message]
2016-12-07 7:56 ` [PATCH V2 5/5] ARM: BCM53573: Specify USB ports of on-SoC controllers Rafał Miłecki
2016-12-07 7:56 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161207075655.7396-5-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.