[bug report] MIPS: lantiq: implement support for FALCON soc

[Dan Carpenter <dan.carpenter@oracle.com>]

Hello John Crispin,

The patch d41ced01f21d: "MIPS: lantiq: implement support for FALCON
soc" from Apr 19, 2012, leads to the following static checker warning:

	arch/mips/lantiq/falcon/sysctrl.c:152 falcon_gpe_enable()
	warn: mask and shift to zero

arch/mips/lantiq/falcon/sysctrl.c
   140  /* enable the ONU core */
   141  static void falcon_gpe_enable(void)
   142  {
   143          unsigned int freq;
   144          unsigned int status;
   145  
   146          /* if if the clock is already enabled */
   147          status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC);
   148          if (status & (1 << (GPPC_OFFSET + 1)))
   149                  return;
   150  
   151          freq = (status_r32(STATUS_CONFIG) &
   152                  GPEFREQ_MASK) >>
   153                  GPEFREQ_OFFSET;

The mask is 0xC0 and we >> 10 which means that freq is always zero.

   154          if (freq == 0)
   155                  freq = 1; /* use 625MHz on unfused chip */

So we always use 625MHz.

   156  
   157          /* apply new frequency */
   158          sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
   159                  freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
   160          udelay(1);
   161  
   162          /* enable new frequency */
   163          sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
   164          udelay(1);
   165  }

regards,
dan carpenter