From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/2] ASoC: sun4i-spdif: Add quirks to the spdif driver
Date: Tue, 20 Dec 2016 15:49:14 +0100 [thread overview]
Message-ID: <20161220144914.30945-3-codekipper@gmail.com> (raw)
In-Reply-To: <20161220144914.30945-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
It has been seen that some newer SoCs have a different TX FIFO
address and we already have the difference with the A31 requiring
a reset. Add a quirks structure so that these can be managed
easily.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
sound/soc/sunxi/sun4i-spdif.c | 36 +++++++++++++++++++++++++++++++-----
1 file changed, 31 insertions(+), 5 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 048de15d6937..fec62ee1fc72 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -403,9 +403,29 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = {
.name = "spdif",
};
+struct sun4i_spdif_quirks {
+ unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
+ bool has_reset;
+};
+
+static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+};
+
+static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+ .has_reset = true,
+};
+
static const struct of_device_id sun4i_spdif_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-spdif", },
- { .compatible = "allwinner,sun6i-a31-spdif", },
+ {
+ .compatible = "allwinner,sun4i-a10-spdif",
+ .data = &sun4i_a10_spdif_quirks,
+ },
+ {
+ .compatible = "allwinner,sun6i-a31-spdif",
+ .data = &sun6i_a31_spdif_quirks,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
@@ -438,6 +458,7 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
{
struct sun4i_spdif_dev *host;
struct resource *res;
+ const struct sun4i_spdif_quirks *quirks;
int ret;
void __iomem *base;
@@ -459,6 +480,12 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
+ quirks = of_device_get_match_data(&pdev->dev);
+ if (quirks == NULL) {
+ dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
+ return -ENODEV;
+ }
+
host->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&sun4i_spdif_regmap_config);
@@ -476,14 +503,13 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
goto err_disable_apb_clk;
}
- host->dma_params_tx.addr = res->start + SUN4I_SPDIF_TXFIFO;
+ host->dma_params_tx.addr = res->start + quirks->reg_dac_txdata;
host->dma_params_tx.maxburst = 8;
host->dma_params_tx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
platform_set_drvdata(pdev, host);
- if (of_device_is_compatible(pdev->dev.of_node,
- "allwinner,sun6i-a31-spdif")) {
+ if (quirks->has_reset) {
host->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
if (IS_ERR(host->rst) && PTR_ERR(host->rst) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ASoC: sun4i-spdif: Add quirks to the spdif driver
Date: Tue, 20 Dec 2016 15:49:14 +0100 [thread overview]
Message-ID: <20161220144914.30945-3-codekipper@gmail.com> (raw)
In-Reply-To: <20161220144914.30945-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
It has been seen that some newer SoCs have a different TX FIFO
address and we already have the difference with the A31 requiring
a reset. Add a quirks structure so that these can be managed
easily.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-spdif.c | 36 +++++++++++++++++++++++++++++++-----
1 file changed, 31 insertions(+), 5 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 048de15d6937..fec62ee1fc72 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -403,9 +403,29 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = {
.name = "spdif",
};
+struct sun4i_spdif_quirks {
+ unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
+ bool has_reset;
+};
+
+static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+};
+
+static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+ .has_reset = true,
+};
+
static const struct of_device_id sun4i_spdif_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-spdif", },
- { .compatible = "allwinner,sun6i-a31-spdif", },
+ {
+ .compatible = "allwinner,sun4i-a10-spdif",
+ .data = &sun4i_a10_spdif_quirks,
+ },
+ {
+ .compatible = "allwinner,sun6i-a31-spdif",
+ .data = &sun6i_a31_spdif_quirks,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
@@ -438,6 +458,7 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
{
struct sun4i_spdif_dev *host;
struct resource *res;
+ const struct sun4i_spdif_quirks *quirks;
int ret;
void __iomem *base;
@@ -459,6 +480,12 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
+ quirks = of_device_get_match_data(&pdev->dev);
+ if (quirks == NULL) {
+ dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
+ return -ENODEV;
+ }
+
host->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&sun4i_spdif_regmap_config);
@@ -476,14 +503,13 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
goto err_disable_apb_clk;
}
- host->dma_params_tx.addr = res->start + SUN4I_SPDIF_TXFIFO;
+ host->dma_params_tx.addr = res->start + quirks->reg_dac_txdata;
host->dma_params_tx.maxburst = 8;
host->dma_params_tx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
platform_set_drvdata(pdev, host);
- if (of_device_is_compatible(pdev->dev.of_node,
- "allwinner,sun6i-a31-spdif")) {
+ if (quirks->has_reset) {
host->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
if (IS_ERR(host->rst) && PTR_ERR(host->rst) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, lgirdwood@gmail.com,
broonie@kernel.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH 2/2] ASoC: sun4i-spdif: Add quirks to the spdif driver
Date: Tue, 20 Dec 2016 15:49:14 +0100 [thread overview]
Message-ID: <20161220144914.30945-3-codekipper@gmail.com> (raw)
In-Reply-To: <20161220144914.30945-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
It has been seen that some newer SoCs have a different TX FIFO
address and we already have the difference with the A31 requiring
a reset. Add a quirks structure so that these can be managed
easily.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-spdif.c | 36 +++++++++++++++++++++++++++++++-----
1 file changed, 31 insertions(+), 5 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 048de15d6937..fec62ee1fc72 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -403,9 +403,29 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = {
.name = "spdif",
};
+struct sun4i_spdif_quirks {
+ unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
+ bool has_reset;
+};
+
+static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+};
+
+static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
+ .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
+ .has_reset = true,
+};
+
static const struct of_device_id sun4i_spdif_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-spdif", },
- { .compatible = "allwinner,sun6i-a31-spdif", },
+ {
+ .compatible = "allwinner,sun4i-a10-spdif",
+ .data = &sun4i_a10_spdif_quirks,
+ },
+ {
+ .compatible = "allwinner,sun6i-a31-spdif",
+ .data = &sun6i_a31_spdif_quirks,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
@@ -438,6 +458,7 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
{
struct sun4i_spdif_dev *host;
struct resource *res;
+ const struct sun4i_spdif_quirks *quirks;
int ret;
void __iomem *base;
@@ -459,6 +480,12 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
+ quirks = of_device_get_match_data(&pdev->dev);
+ if (quirks == NULL) {
+ dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
+ return -ENODEV;
+ }
+
host->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&sun4i_spdif_regmap_config);
@@ -476,14 +503,13 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
goto err_disable_apb_clk;
}
- host->dma_params_tx.addr = res->start + SUN4I_SPDIF_TXFIFO;
+ host->dma_params_tx.addr = res->start + quirks->reg_dac_txdata;
host->dma_params_tx.maxburst = 8;
host->dma_params_tx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
platform_set_drvdata(pdev, host);
- if (of_device_is_compatible(pdev->dev.of_node,
- "allwinner,sun6i-a31-spdif")) {
+ if (quirks->has_reset) {
host->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
if (IS_ERR(host->rst) && PTR_ERR(host->rst) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
--
2.11.0
next prev parent reply other threads:[~2016-12-20 14:49 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-20 14:49 [PATCH 0/2] ASoC: sun4i-spdif: Changes in preparation of supporting new SoCs codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 14:49 ` codekipper
2016-12-20 14:49 ` codekipper at gmail.com
[not found] ` <20161220144914.30945-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-12-20 14:49 ` [PATCH 1/2] ASoC: sun4i-spdif: remove legacy dapm components codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 14:49 ` codekipper
2016-12-20 14:49 ` codekipper at gmail.com
[not found] ` <20161220144914.30945-2-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-12-20 19:11 ` Maxime Ripard
2016-12-20 19:11 ` Maxime Ripard
2016-12-20 19:11 ` Maxime Ripard
2016-12-31 19:19 ` Applied "ASoC: sun4i-spdif: remove legacy dapm components" to the asoc tree Mark Brown
2016-12-31 19:19 ` Mark Brown
2016-12-31 19:19 ` Mark Brown
2016-12-20 14:49 ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2016-12-20 14:49 ` [PATCH 2/2] ASoC: sun4i-spdif: Add quirks to the spdif driver codekipper
2016-12-20 14:49 ` codekipper at gmail.com
[not found] ` <20161220144914.30945-3-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-12-20 19:12 ` Maxime Ripard
2016-12-20 19:12 ` Maxime Ripard
2016-12-20 19:12 ` Maxime Ripard
2016-12-31 19:19 ` Applied "ASoC: sun4i-spdif: Add quirks to the spdif driver" to the asoc tree Mark Brown
2016-12-31 19:19 ` Mark Brown
2016-12-31 19:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161220144914.30945-3-codekipper@gmail.com \
--to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.