All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org, Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH] drm/i915/gen9+: Rely on VBT DDI port info for eDP detection
Date: Tue, 20 Dec 2016 17:31:15 +0200	[thread overview]
Message-ID: <20161220153115.GY31595@intel.com> (raw)
In-Reply-To: <1482246769-4624-1-git-send-email-imre.deak@intel.com>

On Tue, Dec 20, 2016 at 05:12:49PM +0200, Imre Deak wrote:
> There is at least one APL based system using port A in DP mode
> (connecting to an on-board DP->VGA adaptor). Atm we'll configure port A
> unconditionally as eDP which is incorrect in this case. Fix this by
> relying on the VBT DDI port 'internal port' flag instead on all ports
> GEN9 onwards. For now chicken out from doing this on earlier DDI
> platforms too.
> 
> Signed-off-by: Imre Deak <imre.deak@intel.com>

Yeah, I think we should try to move towards using the VBT more
consistently here. Eventually we migth even want to unify everything to
using the pre-parsed port infromation, but going in babt steps is a
little less likely to regress old machines.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

At one point when I was monkeying around with this VBT stuff Paulo
suggested that we should just use the pre-parsed stuff more, so presumably
he should be happy with this direction as well. Although I think that
specific case might have been about the DP++ stuff.

> ---
>  drivers/gpu/drm/i915/i915_drv.h   | 1 +
>  drivers/gpu/drm/i915/intel_bios.c | 1 +
>  drivers/gpu/drm/i915/intel_dp.c   | 3 +++
>  3 files changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 7e94e506..42fb7e9 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1669,6 +1669,7 @@ struct ddi_vbt_port_info {
>  	uint8_t supports_dvi:1;
>  	uint8_t supports_hdmi:1;
>  	uint8_t supports_dp:1;
> +	uint8_t supports_edp:1;
>  
>  	uint8_t alternate_aux_channel;
>  	uint8_t alternate_ddc_pin;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 1cf2fa6..60fdd31 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -1161,6 +1161,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
>  	info->supports_dvi = is_dvi;
>  	info->supports_hdmi = is_hdmi;
>  	info->supports_dp = is_dp;
> +	info->supports_edp = is_edp;
>  
>  	DRM_DEBUG_KMS("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d\n",
>  		      port_name(port), is_dp, is_hdmi, is_dvi, is_edp, is_crt);
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index d37cb00..7f3f4fa 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4983,6 +4983,9 @@ bool intel_dp_is_edp(struct drm_i915_private *dev_priv, enum port port)
>  	if (INTEL_GEN(dev_priv) < 5)
>  		return false;
>  
> +	if (INTEL_GEN(dev_priv) >= 9)
> +		return dev_priv->vbt.ddi_port_info[port].supports_edp;
> +
>  	if (port == PORT_A)
>  		return true;
>  
> -- 
> 2.5.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-12-20 15:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-20 15:12 [PATCH] drm/i915/gen9+: Rely on VBT DDI port info for eDP detection Imre Deak
2016-12-20 15:31 ` Ville Syrjälä [this message]
2016-12-20 16:02 ` David Weinehall
2016-12-20 16:34   ` Imre Deak
2016-12-21  8:34     ` Jani Nikula
2016-12-21 10:03       ` Imre Deak
2016-12-20 17:45 ` ✗ Fi.CI.BAT: warning for " Patchwork
2016-12-21 10:17 ` [PATCH v2] drm/i915/ddi: " Imre Deak
2016-12-21 11:21   ` Jani Nikula
2016-12-21 11:50     ` Imre Deak
2016-12-21 11:56       ` Jani Nikula
2016-12-22  9:12   ` David Weinehall
2016-12-22 12:28     ` Imre Deak
2016-12-21 10:56 ` ✗ Fi.CI.BAT: failure for drm/i915/gen9+: Rely on VBT DDI port info for eDP detection (rev2) Patchwork
2016-12-21 12:15   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161220153115.GY31595@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.