From: Jiri Pirko <jiri@resnulli.us>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [net-next PATCH v2 2/6] i40e: Introduce VF Port Representator(VFPR) netdevs.
Date: Thu, 5 Jan 2017 13:44:25 +0100 [thread overview]
Message-ID: <20170105124425.GA2211@nanopsycho> (raw)
In-Reply-To: <1483466874-2962-3-git-send-email-sridhar.samudrala@intel.com>
Tue, Jan 03, 2017 at 07:07:50PM CET, sridhar.samudrala at intel.com wrote:
>VF Port Representator netdevs are created for each VF if the switch mode
>is set to 'switchdev'. These netdevs can be used to control and configure
>VFs from PFs namespace. They enable exposing VF statistics, configure and
>monitor link state, mtu, filters, fdb/vlan entries etc. of VFs.
>Broadcast filters are not enabled in switchdev mode.
>
>Sample script to create VF port representors
># rmmod i40e; modprobe i40e
># devlink dev eswitch set pci/0000:05:00.0 mode switchdev
># echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs
># ip l show
>297: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop portid 6805ca2e7268 state DOWN mode DEFAULT group default qlen 1000
> link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff
> vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
> vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
>299: enp5s0f0-vf0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>300: enp5s0f0-vf1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>
>Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
>---
> drivers/net/ethernet/intel/i40e/i40e_main.c | 21 ++-
> drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 154 ++++++++++++++++++++-
> drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h | 14 ++
> 3 files changed, 182 insertions(+), 7 deletions(-)
>
>diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
>index c01a620..17428f0 100644
>--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
>+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
>@@ -10938,15 +10938,34 @@ static int i40e_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
> static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
> {
> struct i40e_pf *pf = devlink_priv(devlink);
>- int err = 0;
>+ struct i40e_vf *vf;
>+ int i, j, err = 0;
>
> if (mode == pf->eswitch_mode)
> goto done;
>
> switch (mode) {
> case DEVLINK_ESWITCH_MODE_LEGACY:
>+ for (i = 0; i < pf->num_alloc_vfs; i++) {
>+ vf = &(pf->vf[i]);
>+ i40e_free_vfpr_netdev(vf);
>+ }
> pf->eswitch_mode = mode;
> break;
>+ case DEVLINK_ESWITCH_MODE_SWITCHDEV:
>+ for (i = 0; i < pf->num_alloc_vfs; i++) {
>+ vf = &(pf->vf[i]);
>+ err = i40e_alloc_vfpr_netdev(vf, i);
>+ if (err) {
>+ for (j = 0; j < i; j++) {
>+ vf = &(pf->vf[j]);
>+ i40e_free_vfpr_netdev(vf);
>+ }
>+ goto done;
>+ }
>+ }
>+ pf->eswitch_mode = mode;
^^^^^^^^^^^^^^^^ wrong indent
WARNING: multiple messages have this Message-ID (diff)
From: Jiri Pirko <jiri@resnulli.us>
To: Sridhar Samudrala <sridhar.samudrala@intel.com>
Cc: alexander.h.duyck@intel.com, john.r.fastabend@intel.com,
anjali.singhai@intel.com, jakub.kicinski@netronome.com,
davem@davemloft.net, intel-wired-lan@lists.osuosl.org,
netdev@vger.kernel.org
Subject: Re: [net-next PATCH v2 2/6] i40e: Introduce VF Port Representator(VFPR) netdevs.
Date: Thu, 5 Jan 2017 13:44:25 +0100 [thread overview]
Message-ID: <20170105124425.GA2211@nanopsycho> (raw)
In-Reply-To: <1483466874-2962-3-git-send-email-sridhar.samudrala@intel.com>
Tue, Jan 03, 2017 at 07:07:50PM CET, sridhar.samudrala@intel.com wrote:
>VF Port Representator netdevs are created for each VF if the switch mode
>is set to 'switchdev'. These netdevs can be used to control and configure
>VFs from PFs namespace. They enable exposing VF statistics, configure and
>monitor link state, mtu, filters, fdb/vlan entries etc. of VFs.
>Broadcast filters are not enabled in switchdev mode.
>
>Sample script to create VF port representors
># rmmod i40e; modprobe i40e
># devlink dev eswitch set pci/0000:05:00.0 mode switchdev
># echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs
># ip l show
>297: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop portid 6805ca2e7268 state DOWN mode DEFAULT group default qlen 1000
> link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff
> vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
> vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
>299: enp5s0f0-vf0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>300: enp5s0f0-vf1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>
>Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
>---
> drivers/net/ethernet/intel/i40e/i40e_main.c | 21 ++-
> drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 154 ++++++++++++++++++++-
> drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h | 14 ++
> 3 files changed, 182 insertions(+), 7 deletions(-)
>
>diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
>index c01a620..17428f0 100644
>--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
>+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
>@@ -10938,15 +10938,34 @@ static int i40e_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
> static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
> {
> struct i40e_pf *pf = devlink_priv(devlink);
>- int err = 0;
>+ struct i40e_vf *vf;
>+ int i, j, err = 0;
>
> if (mode == pf->eswitch_mode)
> goto done;
>
> switch (mode) {
> case DEVLINK_ESWITCH_MODE_LEGACY:
>+ for (i = 0; i < pf->num_alloc_vfs; i++) {
>+ vf = &(pf->vf[i]);
>+ i40e_free_vfpr_netdev(vf);
>+ }
> pf->eswitch_mode = mode;
> break;
>+ case DEVLINK_ESWITCH_MODE_SWITCHDEV:
>+ for (i = 0; i < pf->num_alloc_vfs; i++) {
>+ vf = &(pf->vf[i]);
>+ err = i40e_alloc_vfpr_netdev(vf, i);
>+ if (err) {
>+ for (j = 0; j < i; j++) {
>+ vf = &(pf->vf[j]);
>+ i40e_free_vfpr_netdev(vf);
>+ }
>+ goto done;
>+ }
>+ }
>+ pf->eswitch_mode = mode;
^^^^^^^^^^^^^^^^ wrong indent
next prev parent reply other threads:[~2017-01-05 12:44 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-03 18:07 [Intel-wired-lan] [net-next PATCH v2 0/6] i40e: Add VF Port representator support for SR-IOV VFs Sridhar Samudrala
2017-01-03 18:07 ` Sridhar Samudrala
2017-01-03 18:07 ` [Intel-wired-lan] [net-next PATCH v2 1/6] i40e: Introduce devlink interface Sridhar Samudrala
2017-01-03 18:07 ` Sridhar Samudrala
2017-01-03 18:07 ` [Intel-wired-lan] [net-next PATCH v2 2/6] i40e: Introduce VF Port Representator(VFPR) netdevs Sridhar Samudrala
2017-01-03 18:07 ` Sridhar Samudrala
2017-01-05 12:44 ` Jiri Pirko [this message]
2017-01-05 12:44 ` Jiri Pirko
2017-01-05 21:46 ` [Intel-wired-lan] " Jeff Kirsher
2017-01-05 21:46 ` Jeff Kirsher
2017-01-06 0:42 ` Samudrala, Sridhar
2017-01-06 0:42 ` Samudrala, Sridhar
2017-01-03 18:07 ` [Intel-wired-lan] [net-next PATCH v2 3/6] i40e: Sync link state between VFs and VFPRs Sridhar Samudrala
2017-01-03 18:07 ` Sridhar Samudrala
2017-01-03 18:07 ` [Intel-wired-lan] [net-next PATCH v2 4/6] net: store port/representator id in metadata_dst Sridhar Samudrala
2017-01-03 18:07 ` [Intel-wired-lan] [net-next PATCH v2 5/6] i40e: Add TX and RX support in switchdev mode Sridhar Samudrala
2017-01-03 18:07 ` Sridhar Samudrala
2017-01-05 12:08 ` [Intel-wired-lan] " Or Gerlitz
2017-01-05 12:08 ` Or Gerlitz
2017-01-05 16:33 ` [Intel-wired-lan] " Jakub Kicinski
2017-01-05 16:33 ` Jakub Kicinski
2017-01-05 12:56 ` [Intel-wired-lan] " Jiri Pirko
2017-01-05 12:56 ` Jiri Pirko
2017-01-06 0:27 ` [Intel-wired-lan] " Samudrala, Sridhar
2017-01-06 0:27 ` Samudrala, Sridhar
2017-01-06 17:30 ` [Intel-wired-lan] " Jiri Pirko
2017-01-06 17:30 ` Jiri Pirko
2017-01-06 19:08 ` [Intel-wired-lan] " Jakub Kicinski
2017-01-06 19:08 ` Jakub Kicinski
2017-01-07 8:27 ` [Intel-wired-lan] " Jiri Pirko
2017-01-07 8:27 ` Jiri Pirko
2017-01-03 18:07 ` [Intel-wired-lan] [net-next PATCH v2 6/6] i40e: Add support for exposing VF port statistics via VFPR netdev on the host Sridhar Samudrala
2017-01-03 18:07 ` Sridhar Samudrala
2017-01-03 19:48 ` [Intel-wired-lan] [net-next PATCH v2 0/6] i40e: Add VF Port representator support for SR-IOV VFs Or Gerlitz
2017-01-03 19:48 ` Or Gerlitz
2017-01-03 20:04 ` [Intel-wired-lan] " Alexander Duyck
2017-01-03 20:04 ` Alexander Duyck
2017-01-03 20:24 ` Samudrala, Sridhar
2017-01-03 20:24 ` Samudrala, Sridhar
2017-01-03 20:45 ` Jakub Kicinski
2017-01-03 20:45 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170105124425.GA2211@nanopsycho \
--to=jiri@resnulli.us \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.