All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cyril Bur <cyrilbur@gmail.com>
To: devicetree@vger.kernel.org, jassisinghbrar@gmail.com,
	arnd@arndb.de, gregkh@linuxfoundation.org
Cc: joel@jms.id.au, mark.rutland@arm.com, robh+dt@kernel.org,
	openbmc@lists.ozlabs.org, andrew@aj.id.au,
	benh@kernel.crashing.org, xow@google.com, jk@ozlabs.org
Subject: [PATCH 1/4] Documentation: dt: mailbox: Add Aspeed ast2400/2500 bindings
Date: Thu, 12 Jan 2017 11:29:07 +1100	[thread overview]
Message-ID: <20170112002910.3650-2-cyrilbur@gmail.com> (raw)
In-Reply-To: <20170112002910.3650-1-cyrilbur@gmail.com>

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
---
 .../devicetree/bindings/mailbox/aspeed-mbox.txt    | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt b/Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt
new file mode 100644
index 000000000000..633cd534d91c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt
@@ -0,0 +1,44 @@
+ASpeed Mailbox Driver
+=====================
+
+The ASpeed mailbox allows for communication between different
+processors. The mailbox on the ASpeed ast2400 and ast2500 is a set of
+16 single byte data registers along with interrupt and configuration
+registers directly on the SoC. These are memory mapped on the aspeed
+and can be accessed via the SuperIO registers on the other processor.
+
+Device Node:
+============
+This represents the mailbox on the Soc.
+
+As the mailbox registers sit on the LPC bus, it makes most sense for
+the device to be within the LPC host node. See
+Documentation/devicetree/bindings/mfd/aspeed-lpc.txt for more
+information. This does not have to be the case, provided the reg
+property can give the full address of the mbox registers.
+
+Required Properties:
+--------------------
+- compatible:	Should be one of the following,
+				"aspeed,ast2400-mbox" for ast2400 SoCs
+				"aspeed,ast2500-mbox" for ast2500 SoCs
+
+- reg:			Contains the mailbox address register range (base
+				address and length). Keeping in mind that if the node
+				exists within the LPC host node and that base is
+				relative to that.
+
+- interrupts:	Contains interrupt information for the mailbox device.
+
+- #mbox-cells:	Common property, should be 1.
+
+Example:
+--------
+
+mbox: mbox@180 {
+	compatible = "aspeed,ast2400-mbox";
+	reg = <0x180 0x5c>;
+	interrupts = <46>;
+	#mbox-cells = <1>;
+};
+
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Cyril Bur <cyrilbur-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org
Cc: joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	openbmc-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	andrew-zrmu5oMJ5Fs@public.gmane.org,
	benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
	xow-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org
Subject: [PATCH 1/4] Documentation: dt: mailbox: Add Aspeed ast2400/2500 bindings
Date: Thu, 12 Jan 2017 11:29:07 +1100	[thread overview]
Message-ID: <20170112002910.3650-2-cyrilbur@gmail.com> (raw)
In-Reply-To: <20170112002910.3650-1-cyrilbur-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Signed-off-by: Cyril Bur <cyrilbur-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 .../devicetree/bindings/mailbox/aspeed-mbox.txt    | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt b/Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt
new file mode 100644
index 000000000000..633cd534d91c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/aspeed-mbox.txt
@@ -0,0 +1,44 @@
+ASpeed Mailbox Driver
+=====================
+
+The ASpeed mailbox allows for communication between different
+processors. The mailbox on the ASpeed ast2400 and ast2500 is a set of
+16 single byte data registers along with interrupt and configuration
+registers directly on the SoC. These are memory mapped on the aspeed
+and can be accessed via the SuperIO registers on the other processor.
+
+Device Node:
+============
+This represents the mailbox on the Soc.
+
+As the mailbox registers sit on the LPC bus, it makes most sense for
+the device to be within the LPC host node. See
+Documentation/devicetree/bindings/mfd/aspeed-lpc.txt for more
+information. This does not have to be the case, provided the reg
+property can give the full address of the mbox registers.
+
+Required Properties:
+--------------------
+- compatible:	Should be one of the following,
+				"aspeed,ast2400-mbox" for ast2400 SoCs
+				"aspeed,ast2500-mbox" for ast2500 SoCs
+
+- reg:			Contains the mailbox address register range (base
+				address and length). Keeping in mind that if the node
+				exists within the LPC host node and that base is
+				relative to that.
+
+- interrupts:	Contains interrupt information for the mailbox device.
+
+- #mbox-cells:	Common property, should be 1.
+
+Example:
+--------
+
+mbox: mbox@180 {
+	compatible = "aspeed,ast2400-mbox";
+	reg = <0x180 0x5c>;
+	interrupts = <46>;
+	#mbox-cells = <1>;
+};
+
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2017-01-12  0:30 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-12  0:29 [PATCH 0/4] ASpeed mailbox and LPC control drivers Cyril Bur
2017-01-12  0:29 ` Cyril Bur
2017-01-12  0:29 ` Cyril Bur [this message]
2017-01-12  0:29   ` [PATCH 1/4] Documentation: dt: mailbox: Add Aspeed ast2400/2500 bindings Cyril Bur
2017-01-18 20:38   ` Rob Herring
2017-01-18 20:38     ` Rob Herring
2017-01-19  0:05     ` Cyril Bur
2017-01-19  0:05       ` Cyril Bur
2017-01-19 15:08       ` Benjamin Herrenschmidt
2017-01-19 15:08         ` Benjamin Herrenschmidt
2017-01-12  0:29 ` [PATCH 2/4] Documentation: dt: misc: Add Aspeed ast2400/2500 LPC Control bindings Cyril Bur
2017-01-12  0:29   ` Cyril Bur
2017-01-18 21:16   ` Rob Herring
2017-01-18 21:16     ` Rob Herring
2017-01-19  0:19     ` Cyril Bur
2017-01-19  0:19       ` Cyril Bur
2017-01-12  0:29 ` [PATCH 3/4] drivers/misc: Add ASpeed LPC control driver Cyril Bur
2017-01-12  0:29   ` Cyril Bur
2017-01-12  7:43   ` Greg KH
2017-01-12  7:43     ` Greg KH
2017-01-12 15:36     ` Benjamin Herrenschmidt
2017-01-12 15:36       ` Benjamin Herrenschmidt
2017-01-12  7:47   ` Greg KH
2017-01-12  7:47     ` Greg KH
2017-01-12 10:16     ` Cyril Bur
2017-01-12 10:16       ` Cyril Bur
2017-01-12 10:30       ` Greg KH
2017-01-12 10:30         ` Greg KH
2017-01-12 15:27         ` Benjamin Herrenschmidt
2017-01-12 15:27           ` Benjamin Herrenschmidt
2017-01-12 16:00           ` Greg KH
2017-01-12 16:00             ` Greg KH
2017-01-12 16:07             ` Benjamin Herrenschmidt
2017-01-12 16:07               ` Benjamin Herrenschmidt
2017-01-12 16:26               ` Greg KH
2017-01-12 16:26                 ` Greg KH
2017-01-12 16:31                 ` Benjamin Herrenschmidt
2017-01-12 16:31                   ` Benjamin Herrenschmidt
2017-01-12 15:35       ` Benjamin Herrenschmidt
2017-01-12 15:35         ` Benjamin Herrenschmidt
2017-01-12 16:27         ` Greg KH
2017-01-12 16:27           ` Greg KH
2017-01-12 16:29         ` Benjamin Herrenschmidt
2017-01-12 16:29           ` Benjamin Herrenschmidt
2017-01-12 17:27           ` Greg KH
2017-01-12 17:27             ` Greg KH
2017-01-12  0:29 ` [PATCH 4/4] drivers/mailbox: Add ASpeed mailbox driver Cyril Bur
2017-01-12  0:29   ` Cyril Bur
2017-02-07  5:40   ` Joel Stanley
2017-02-07  5:40     ` Joel Stanley
2017-02-07  5:44     ` Benjamin Herrenschmidt
2017-02-07  5:44       ` Benjamin Herrenschmidt
2017-02-07 22:57     ` Cyril Bur
2017-02-07 22:57       ` Cyril Bur
2017-02-07 22:59       ` Joel Stanley
2017-02-07 22:59         ` Joel Stanley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170112002910.3650-2-cyrilbur@gmail.com \
    --to=cyrilbur@gmail.com \
    --cc=andrew@aj.id.au \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=mark.rutland@arm.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=xow@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.