[PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[codekipper-Re5JQEeQqe8AvxtiuMwx3w]

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
transmit fifo is at a different address.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
-- 
2.11.0

[PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[codekipper]

From: Marcus Cooper <codekipper@gmail.com>

The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
transmit fifo is at a different address.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
-- 
2.11.0

[PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[codekipper at gmail.com]

From: Marcus Cooper <codekipper@gmail.com>

The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
transmit fifo is at a different address.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
-- 
2.11.0

Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 570 bytes --]

On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
> transmit fifo is at a different address.
> 
> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 464 bytes --]

On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
> transmit fifo is at a different address.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Maxime Ripard]

On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper at gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
> transmit fifo is at a different address.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170112/388153bd/attachment.sig>

Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 587 bytes --]

On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
> transmit fifo is at a different address.
> 
> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
>  1 file changed, 1 insertion(+)

This is fine but it doesn't actually add the compatible string to the
driver which I'd expect.

Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 511 bytes --]

On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
> transmit fifo is at a different address.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
>  1 file changed, 1 insertion(+)

This is fine but it doesn't actually add the compatible string to the
driver which I'd expect.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Mark Brown]

On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper at gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
> transmit fifo is at a different address.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
>  1 file changed, 1 insertion(+)

This is fine but it doesn't actually add the compatible string to the
driver which I'd expect.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170117/5c3d2259/attachment-0001.sig>

Re: Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Code Kipper]

On 17 January 2017 at 19:15, Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
>> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>
>> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
>> transmit fifo is at a different address.
>>
>> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
>>  1 file changed, 1 insertion(+)
>
> This is fine but it doesn't actually add the compatible string to the
> driver which I'd expect.
Hi Mark,
I missed the binding documentation on the patch for the driver so I
pushed it separately instead of pushing a new patch version.
You can find it under the subject heading 'ASoC: sun4i-spdif: Add
support for the H3 SoC' and Maxime has ACK it (on the condition that I
add the binding doc).
BR,
CK
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> For more options, visit https://groups.google.com/d/optout.

Re: [linux-sunxi] Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Code Kipper]

On 17 January 2017 at 19:15, Mark Brown <broonie@kernel.org> wrote:
> On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper@gmail.com wrote:
>> From: Marcus Cooper <codekipper@gmail.com>
>>
>> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
>> transmit fifo is at a different address.
>>
>> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>> ---
>>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
>>  1 file changed, 1 insertion(+)
>
> This is fine but it doesn't actually add the compatible string to the
> driver which I'd expect.
Hi Mark,
I missed the binding documentation on the patch for the driver so I
pushed it separately instead of pushing a new patch version.
You can find it under the subject heading 'ASoC: sun4i-spdif: Add
support for the H3 SoC' and Maxime has ACK it (on the condition that I
add the binding doc).
BR,
CK
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[linux-sunxi] Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Code Kipper]

On 17 January 2017 at 19:15, Mark Brown <broonie@kernel.org> wrote:
> On Thu, Jan 12, 2017 at 06:33:43PM +0100, codekipper at gmail.com wrote:
>> From: Marcus Cooper <codekipper@gmail.com>
>>
>> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
>> transmit fifo is at a different address.
>>
>> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>> ---
>>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
>>  1 file changed, 1 insertion(+)
>
> This is fine but it doesn't actually add the compatible string to the
> driver which I'd expect.
Hi Mark,
I missed the binding documentation on the patch for the driver so I
pushed it separately instead of pushing a new patch version.
You can find it under the subject heading 'ASoC: sun4i-spdif: Add
support for the H3 SoC' and Maxime has ACK it (on the condition that I
add the binding doc).
BR,
CK
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

Re: Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 588 bytes --]

On Wed, Jan 18, 2017 at 08:09:00AM +0100, Code Kipper wrote:

> I missed the binding documentation on the patch for the driver so I
> pushed it separately instead of pushing a new patch version.
> You can find it under the subject heading 'ASoC: sun4i-spdif: Add
> support for the H3 SoC' and Maxime has ACK it (on the condition that I
> add the binding doc).

I don't seem to have that patch.  If Maxime said it needed changes for
him to ack it there's every chance I just deleted it waiting for you to
resend, it's certainly confusing to see a patch like this without the
matching code.

Re: [linux-sunxi] Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 589 bytes --]

On Wed, Jan 18, 2017 at 08:09:00AM +0100, Code Kipper wrote:

> I missed the binding documentation on the patch for the driver so I
> pushed it separately instead of pushing a new patch version.
> You can find it under the subject heading 'ASoC: sun4i-spdif: Add
> support for the H3 SoC' and Maxime has ACK it (on the condition that I
> add the binding doc).

I don't seem to have that patch.  If Maxime said it needed changes for
him to ack it there's every chance I just deleted it waiting for you to
resend, it's certainly confusing to see a patch like this without the
matching code.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[linux-sunxi] Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Mark Brown]

On Wed, Jan 18, 2017 at 08:09:00AM +0100, Code Kipper wrote:

> I missed the binding documentation on the patch for the driver so I
> pushed it separately instead of pushing a new patch version.
> You can find it under the subject heading 'ASoC: sun4i-spdif: Add
> support for the H3 SoC' and Maxime has ACK it (on the condition that I
> add the binding doc).

I don't seem to have that patch.  If Maxime said it needed changes for
him to ack it there's every chance I just deleted it waiting for you to
resend, it's certainly confusing to see a patch like this without the
matching code.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170119/325901fb/attachment.sig>

Re: Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Code Kipper]

On 19 January 2017 at 18:03, Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Wed, Jan 18, 2017 at 08:09:00AM +0100, Code Kipper wrote:
>
>> I missed the binding documentation on the patch for the driver so I
>> pushed it separately instead of pushing a new patch version.
>> You can find it under the subject heading 'ASoC: sun4i-spdif: Add
>> support for the H3 SoC' and Maxime has ACK it (on the condition that I
>> add the binding doc).
>
> I don't seem to have that patch.  If Maxime said it needed changes for
> him to ack it there's every chance I just deleted it waiting for you to
> resend, it's certainly confusing to see a patch like this without the
> matching code.
No worries...I'll squash this patch into it and send as a V2.
CK

Re: [linux-sunxi] Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Code Kipper]

On 19 January 2017 at 18:03, Mark Brown <broonie@kernel.org> wrote:
> On Wed, Jan 18, 2017 at 08:09:00AM +0100, Code Kipper wrote:
>
>> I missed the binding documentation on the patch for the driver so I
>> pushed it separately instead of pushing a new patch version.
>> You can find it under the subject heading 'ASoC: sun4i-spdif: Add
>> support for the H3 SoC' and Maxime has ACK it (on the condition that I
>> add the binding doc).
>
> I don't seem to have that patch.  If Maxime said it needed changes for
> him to ack it there's every chance I just deleted it waiting for you to
> resend, it's certainly confusing to see a patch like this without the
> matching code.
No worries...I'll squash this patch into it and send as a V2.
CK

[linux-sunxi] Re: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

[Code Kipper]

On 19 January 2017 at 18:03, Mark Brown <broonie@kernel.org> wrote:
> On Wed, Jan 18, 2017 at 08:09:00AM +0100, Code Kipper wrote:
>
>> I missed the binding documentation on the patch for the driver so I
>> pushed it separately instead of pushing a new patch version.
>> You can find it under the subject heading 'ASoC: sun4i-spdif: Add
>> support for the H3 SoC' and Maxime has ACK it (on the condition that I
>> add the binding doc).
>
> I don't seem to have that patch.  If Maxime said it needed changes for
> him to ack it there's every chance I just deleted it waiting for you to
> resend, it's certainly confusing to see a patch like this without the
> matching code.
No worries...I'll squash this patch into it and send as a V2.
CK

Applied "ASoC: sunxi: Add bindings for sun8i to SPDIF" to the asoc tree

[Mark Brown]

The patch

   ASoC: sunxi: Add bindings for sun8i to SPDIF

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From cb5c978f9a56c459d5f13901efcfe44b97c4182d Mon Sep 17 00:00:00 2001
From: Marcus Cooper <codekipper@gmail.com>
Date: Thu, 19 Jan 2017 20:52:57 +0100
Subject: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
transmit fifo is at a different address.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
-- 
2.11.0

Applied "ASoC: sunxi: Add bindings for sun8i to SPDIF" to the asoc tree

[Mark Brown]

The patch

   ASoC: sunxi: Add bindings for sun8i to SPDIF

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From cb5c978f9a56c459d5f13901efcfe44b97c4182d Mon Sep 17 00:00:00 2001
From: Marcus Cooper <codekipper@gmail.com>
Date: Thu, 19 Jan 2017 20:52:57 +0100
Subject: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
transmit fifo is at a different address.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
-- 
2.11.0

Applied "ASoC: sunxi: Add bindings for sun8i to SPDIF" to the asoc tree

[Mark Brown]

The patch

   ASoC: sunxi: Add bindings for sun8i to SPDIF

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From cb5c978f9a56c459d5f13901efcfe44b97c4182d Mon Sep 17 00:00:00 2001
From: Marcus Cooper <codekipper@gmail.com>
Date: Thu, 19 Jan 2017 20:52:57 +0100
Subject: [PATCH] ASoC: sunxi: Add bindings for sun8i to SPDIF

The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the
transmit fifo is at a different address.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0230c4d20506..fe0a65e6d629 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -10,6 +10,7 @@ Required properties:
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
     - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
+    - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
 
   - reg			: Offset and length of the register set for the device.
 
-- 
2.11.0