From: Dan Carpenter <dan.carpenter@oracle.com>
To: Kukjin Kim <kgene@kernel.org>,
Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Andi Shyti <andi.shyti@samsung.com>,
Mark Brown <broonie@kernel.org>,
linux-samsung-soc@vger.kernel.org, linux-spi@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: [patch] spi: s3c64xx: potential oops on probe error
Date: Fri, 13 Jan 2017 07:42:53 +0000 [thread overview]
Message-ID: <20170113074253.GA30524@mwanda> (raw)
We accidentally mixed up freeing the rx and tx channels which would a
leak and an oops.
Fixes: 3d63a47a380a ("spi: s3c64xx: Don't request/release DMA channels for each SPI transfer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 849ee82..b8cd356 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1147,7 +1147,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
if (IS_ERR(sdd->tx_dma.ch)) {
dev_err(&pdev->dev, "Failed to get TX DMA channel\n");
ret = PTR_ERR(sdd->tx_dma.ch);
- goto err_release_tx_dma;
+ goto err_release_rx_dma;
}
}
@@ -1197,10 +1197,10 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
pm_runtime_set_suspended(&pdev->dev);
if (!is_polling(sdd))
- dma_release_channel(sdd->rx_dma.ch);
-err_release_tx_dma:
- if (!is_polling(sdd))
dma_release_channel(sdd->tx_dma.ch);
+err_release_rx_dma:
+ if (!is_polling(sdd))
+ dma_release_channel(sdd->rx_dma.ch);
err_disable_io_clk:
clk_disable_unprepare(sdd->ioclk);
err_disable_src_clk:
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Kukjin Kim <kgene@kernel.org>,
Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Andi Shyti <andi.shyti@samsung.com>,
Mark Brown <broonie@kernel.org>,
linux-samsung-soc@vger.kernel.org, linux-spi@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: [patch] spi: s3c64xx: potential oops on probe error
Date: Fri, 13 Jan 2017 10:42:53 +0300 [thread overview]
Message-ID: <20170113074253.GA30524@mwanda> (raw)
We accidentally mixed up freeing the rx and tx channels which would a
leak and an oops.
Fixes: 3d63a47a380a ("spi: s3c64xx: Don't request/release DMA channels for each SPI transfer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 849ee82..b8cd356 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1147,7 +1147,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
if (IS_ERR(sdd->tx_dma.ch)) {
dev_err(&pdev->dev, "Failed to get TX DMA channel\n");
ret = PTR_ERR(sdd->tx_dma.ch);
- goto err_release_tx_dma;
+ goto err_release_rx_dma;
}
}
@@ -1197,10 +1197,10 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
pm_runtime_set_suspended(&pdev->dev);
if (!is_polling(sdd))
- dma_release_channel(sdd->rx_dma.ch);
-err_release_tx_dma:
- if (!is_polling(sdd))
dma_release_channel(sdd->tx_dma.ch);
+err_release_rx_dma:
+ if (!is_polling(sdd))
+ dma_release_channel(sdd->rx_dma.ch);
err_disable_io_clk:
clk_disable_unprepare(sdd->ioclk);
err_disable_src_clk:
next reply other threads:[~2017-01-13 7:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170113074414epcas3p2474dd2512aa5b64989bee3696c7c48f8@epcas3p2.samsung.com>
2017-01-13 7:42 ` Dan Carpenter [this message]
2017-01-13 7:42 ` [patch] spi: s3c64xx: potential oops on probe error Dan Carpenter
2017-01-13 8:52 ` Marek Szyprowski
2017-01-13 8:52 ` Marek Szyprowski
2017-01-13 11:12 ` Andi Shyti
2017-01-13 11:12 ` Andi Shyti
2017-01-17 18:46 ` Applied "spi: s3c64xx: potential oops on probe error" to the spi tree Mark Brown
2017-01-17 18:46 ` Mark Brown
2017-01-17 18:46 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170113074253.GA30524@mwanda \
--to=dan.carpenter@oracle.com \
--cc=andi.shyti@samsung.com \
--cc=broonie@kernel.org \
--cc=javier@osg.samsung.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.