From: bruherrera@gmail.com (Bruno Herrera)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/5] ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco
Date: Tue, 17 Jan 2017 14:12:36 -0200 [thread overview]
Message-ID: <20170117161237.3802-5-bruherrera@gmail.com> (raw)
In-Reply-To: <20170117161237.3802-1-bruherrera@gmail.com>
This patch enables USB HS working in FS mode on stm32f429-disco
with 5V VBUS enable.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
---
arch/arm/boot/dts/stm32f429-disco.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 7d0415e..0b2b017 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -88,6 +88,14 @@
gpios = <&gpioa 0 0>;
};
};
+
+ /* This turns on vbus for otg for host mode (dwc2) */
+ vcc5v_otg: vcc5v-otg-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpioc 4 0>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ };
};
&clk_hse {
@@ -99,3 +107,11 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_hs {
+ compatible = "st,stm32f4xx-fsotg";
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_fs_pins_b>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.10.1 (Apple Git-78)
WARNING: multiple messages have this Message-ID (diff)
From: Bruno Herrera <bruherrera@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
johnyoun@synopsys.com, felipe.balbi@linux.intel.com
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/5] ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco
Date: Tue, 17 Jan 2017 14:12:36 -0200 [thread overview]
Message-ID: <20170117161237.3802-5-bruherrera@gmail.com> (raw)
In-Reply-To: <20170117161237.3802-1-bruherrera@gmail.com>
This patch enables USB HS working in FS mode on stm32f429-disco
with 5V VBUS enable.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
---
arch/arm/boot/dts/stm32f429-disco.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 7d0415e..0b2b017 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -88,6 +88,14 @@
gpios = <&gpioa 0 0>;
};
};
+
+ /* This turns on vbus for otg for host mode (dwc2) */
+ vcc5v_otg: vcc5v-otg-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpioc 4 0>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ };
};
&clk_hse {
@@ -99,3 +107,11 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_hs {
+ compatible = "st,stm32f4xx-fsotg";
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_fs_pins_b>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.10.1 (Apple Git-78)
next prev parent reply other threads:[~2017-01-17 16:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-17 16:12 [PATCH v3 0/5] usb: dwc2: Add support for USB OTG on STM32F4x9 Bruno Herrera
2017-01-17 16:12 ` Bruno Herrera
2017-01-17 16:12 ` [PATCH v3 1/5] usb: dwc2: Add support for STM32F429/439/469 USB OTG HS/FS in FS mode (internal PHY) Bruno Herrera
2017-01-17 16:12 ` Bruno Herrera
2017-01-19 23:12 ` John Youn
2017-01-19 23:12 ` John Youn
2017-01-17 16:12 ` [PATCH v3 2/5] ARM: dts: stm32: Add USB FS support for STM32F429 MCU Bruno Herrera
2017-01-17 16:12 ` Bruno Herrera
2017-01-17 16:12 ` [PATCH v3 3/5] ARM: dts: stm32: Enable USB FS on stm32f469-disco Bruno Herrera
2017-01-17 16:12 ` Bruno Herrera
2017-01-17 16:12 ` Bruno Herrera [this message]
2017-01-17 16:12 ` [PATCH v3 4/5] ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco Bruno Herrera
2017-01-17 16:12 ` [PATCH v3 5/5] dt-bindings: Document the STM32 USB OTG DWC2 core binding Bruno Herrera
2017-01-17 16:12 ` Bruno Herrera
2017-01-19 19:24 ` Rob Herring
2017-01-19 19:24 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170117161237.3802-5-bruherrera@gmail.com \
--to=bruherrera@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.