From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v4 08/10] net: dsa: Add support for platform data
Date: Tue, 17 Jan 2017 15:21:50 -0800 [thread overview]
Message-ID: <20170117232152.1661-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20170117232152.1661-1-f.fainelli@gmail.com>
Allow drivers to use the new DSA API with platform data. Most of the
code in net/dsa/dsa2.c does not rely so much on device_nodes and can get
the same information from platform_data instead.
We purposely do not support distributed configurations with platform
data, so drivers should be providing a pointer to a 'struct
dsa_chip_data' structure if they wish to communicate per-port layout.
Multiple CPUs port could potentially be supported and dsa_chip_data is
extended to receive up to one reference to an upstream network device
per port described by a dsa_chip_data structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/net/dsa.h | 6 ++++
net/dsa/dsa2.c | 102 ++++++++++++++++++++++++++++++++++++++++++++----------
2 files changed, 90 insertions(+), 18 deletions(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 16a502a6c26a..491008792e4d 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -42,6 +42,11 @@ struct dsa_chip_data {
struct device *host_dev;
int sw_addr;
+ /*
+ * Reference to network devices
+ */
+ struct device *netdev[DSA_MAX_PORTS];
+
/* set to size of eeprom if supported by the switch */
int eeprom_len;
@@ -140,6 +145,7 @@ struct dsa_switch_tree {
};
struct dsa_port {
+ const char *name;
struct net_device *netdev;
struct device_node *dn;
unsigned int ageing_time;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index cd91070b5467..761e8724423f 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -79,19 +79,28 @@ static void dsa_dst_del_ds(struct dsa_switch_tree *dst,
kref_put(&dst->refcount, dsa_free_dst);
}
+/* For platform data configurations, we need to have a valid name argument to
+ * differentiate a disabled port from an enabled one
+ */
static bool dsa_port_is_valid(struct dsa_port *port)
{
- return !!port->dn;
+ return !!(port->dn || port->name);
}
static bool dsa_port_is_dsa(struct dsa_port *port)
{
- return !!of_parse_phandle(port->dn, "link", 0);
+ if (port->name && !strcmp(port->name, "dsa"))
+ return true;
+ else
+ return !!of_parse_phandle(port->dn, "link", 0);
}
static bool dsa_port_is_cpu(struct dsa_port *port)
{
- return !!of_parse_phandle(port->dn, "ethernet", 0);
+ if (port->name && !strcmp(port->name, "cpu"))
+ return true;
+ else
+ return !!of_parse_phandle(port->dn, "ethernet", 0);
}
static bool dsa_ds_find_port_dn(struct dsa_switch *ds,
@@ -251,10 +260,11 @@ static void dsa_cpu_port_unapply(struct dsa_port *port, u32 index,
static int dsa_user_port_apply(struct dsa_port *port, u32 index,
struct dsa_switch *ds)
{
- const char *name;
+ const char *name = port->name;
int err;
- name = of_get_property(port->dn, "label", NULL);
+ if (port->dn)
+ name = of_get_property(port->dn, "label", NULL);
if (!name)
name = "eth%d";
@@ -439,11 +449,15 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
struct net_device *ethernet_dev;
struct device_node *ethernet;
- ethernet = of_parse_phandle(port->dn, "ethernet", 0);
- if (!ethernet)
- return -EINVAL;
+ if (port->dn) {
+ ethernet = of_parse_phandle(port->dn, "ethernet", 0);
+ if (!ethernet)
+ return -EINVAL;
+ ethernet_dev = of_find_net_device_by_node(ethernet);
+ } else {
+ ethernet_dev = device_to_net_device(ds->cd->netdev[index]);
+ }
- ethernet_dev = of_find_net_device_by_node(ethernet);
if (!ethernet_dev)
return -EPROBE_DEFER;
@@ -462,6 +476,7 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
if (IS_ERR(dst->tag_ops)) {
dev_warn(ds->dev, "No tagger for this switch\n");
+ dev_put(ethernet_dev);
return PTR_ERR(dst->tag_ops);
}
@@ -546,6 +561,33 @@ static int dsa_parse_ports_dn(struct device_node *ports, struct dsa_switch *ds)
return 0;
}
+static int dsa_parse_ports(struct dsa_chip_data *cd, struct dsa_switch *ds)
+{
+ bool valid_name_found = false;
+ unsigned int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ if (!cd->port_names[i])
+ continue;
+
+ ds->ports[i].name = cd->port_names[i];
+
+ /* Initialize enabled_port_mask now for drv->setup()
+ * to have access to a correct value, just like what
+ * net/dsa/dsa.c::dsa_switch_setup_one does.
+ */
+ if (!dsa_port_is_cpu(&ds->ports[i]))
+ ds->enabled_port_mask |= 1 << i;
+
+ valid_name_found = true;
+ }
+
+ if (!valid_name_found && i == DSA_MAX_PORTS)
+ return -EINVAL;
+
+ return 0;
+}
+
static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
{
int err;
@@ -570,6 +612,18 @@ static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
return 0;
}
+static int dsa_parse_member(struct dsa_chip_data *pd, u32 *tree, u32 *index)
+{
+ if (!pd)
+ return -ENODEV;
+
+ /* We do not support complex trees with dsa_chip_data */
+ *tree = 0;
+ *index = 0;
+
+ return 0;
+}
+
static struct device_node *dsa_get_ports(struct dsa_switch *ds,
struct device_node *np)
{
@@ -586,23 +640,34 @@ static struct device_node *dsa_get_ports(struct dsa_switch *ds,
static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
{
+ struct dsa_chip_data *pdata = dev->platform_data;
struct device_node *np = dev->of_node;
struct dsa_switch_tree *dst;
struct device_node *ports;
u32 tree, index;
int i, err;
- err = dsa_parse_member_dn(np, &tree, &index);
- if (err)
- return err;
+ if (np) {
+ err = dsa_parse_member_dn(np, &tree, &index);
+ if (err)
+ return err;
- ports = dsa_get_ports(ds, np);
- if (IS_ERR(ports))
- return PTR_ERR(ports);
+ ports = dsa_get_ports(ds, np);
+ if (IS_ERR(ports))
+ return PTR_ERR(ports);
- err = dsa_parse_ports_dn(ports, ds);
- if (err)
- return err;
+ err = dsa_parse_ports_dn(ports, ds);
+ if (err)
+ return err;
+ } else {
+ err = dsa_parse_member(pdata, &tree, &index);
+ if (err)
+ return err;
+
+ err = dsa_parse_ports(pdata, ds);
+ if (err)
+ return err;
+ }
dst = dsa_get_dst(tree);
if (!dst) {
@@ -618,6 +683,7 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
ds->dst = dst;
ds->index = index;
+ ds->cd = pdata;
/* Initialize the routing table */
for (i = 0; i < DSA_MAX_SWITCHES; ++i)
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory Clement <gregory.clement@free-electrons.com>,
Russell King <linux@armlinux.org.uk>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
"David S. Miller" <davem@davemloft.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-arm-kernel@lists.infradead.org (moderated list:ARM/Marvell
Dove/MV78xx0/Orion SOC support),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net-next v4 08/10] net: dsa: Add support for platform data
Date: Tue, 17 Jan 2017 15:21:50 -0800 [thread overview]
Message-ID: <20170117232152.1661-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20170117232152.1661-1-f.fainelli@gmail.com>
Allow drivers to use the new DSA API with platform data. Most of the
code in net/dsa/dsa2.c does not rely so much on device_nodes and can get
the same information from platform_data instead.
We purposely do not support distributed configurations with platform
data, so drivers should be providing a pointer to a 'struct
dsa_chip_data' structure if they wish to communicate per-port layout.
Multiple CPUs port could potentially be supported and dsa_chip_data is
extended to receive up to one reference to an upstream network device
per port described by a dsa_chip_data structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/net/dsa.h | 6 ++++
net/dsa/dsa2.c | 102 ++++++++++++++++++++++++++++++++++++++++++++----------
2 files changed, 90 insertions(+), 18 deletions(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 16a502a6c26a..491008792e4d 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -42,6 +42,11 @@ struct dsa_chip_data {
struct device *host_dev;
int sw_addr;
+ /*
+ * Reference to network devices
+ */
+ struct device *netdev[DSA_MAX_PORTS];
+
/* set to size of eeprom if supported by the switch */
int eeprom_len;
@@ -140,6 +145,7 @@ struct dsa_switch_tree {
};
struct dsa_port {
+ const char *name;
struct net_device *netdev;
struct device_node *dn;
unsigned int ageing_time;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index cd91070b5467..761e8724423f 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -79,19 +79,28 @@ static void dsa_dst_del_ds(struct dsa_switch_tree *dst,
kref_put(&dst->refcount, dsa_free_dst);
}
+/* For platform data configurations, we need to have a valid name argument to
+ * differentiate a disabled port from an enabled one
+ */
static bool dsa_port_is_valid(struct dsa_port *port)
{
- return !!port->dn;
+ return !!(port->dn || port->name);
}
static bool dsa_port_is_dsa(struct dsa_port *port)
{
- return !!of_parse_phandle(port->dn, "link", 0);
+ if (port->name && !strcmp(port->name, "dsa"))
+ return true;
+ else
+ return !!of_parse_phandle(port->dn, "link", 0);
}
static bool dsa_port_is_cpu(struct dsa_port *port)
{
- return !!of_parse_phandle(port->dn, "ethernet", 0);
+ if (port->name && !strcmp(port->name, "cpu"))
+ return true;
+ else
+ return !!of_parse_phandle(port->dn, "ethernet", 0);
}
static bool dsa_ds_find_port_dn(struct dsa_switch *ds,
@@ -251,10 +260,11 @@ static void dsa_cpu_port_unapply(struct dsa_port *port, u32 index,
static int dsa_user_port_apply(struct dsa_port *port, u32 index,
struct dsa_switch *ds)
{
- const char *name;
+ const char *name = port->name;
int err;
- name = of_get_property(port->dn, "label", NULL);
+ if (port->dn)
+ name = of_get_property(port->dn, "label", NULL);
if (!name)
name = "eth%d";
@@ -439,11 +449,15 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
struct net_device *ethernet_dev;
struct device_node *ethernet;
- ethernet = of_parse_phandle(port->dn, "ethernet", 0);
- if (!ethernet)
- return -EINVAL;
+ if (port->dn) {
+ ethernet = of_parse_phandle(port->dn, "ethernet", 0);
+ if (!ethernet)
+ return -EINVAL;
+ ethernet_dev = of_find_net_device_by_node(ethernet);
+ } else {
+ ethernet_dev = device_to_net_device(ds->cd->netdev[index]);
+ }
- ethernet_dev = of_find_net_device_by_node(ethernet);
if (!ethernet_dev)
return -EPROBE_DEFER;
@@ -462,6 +476,7 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
if (IS_ERR(dst->tag_ops)) {
dev_warn(ds->dev, "No tagger for this switch\n");
+ dev_put(ethernet_dev);
return PTR_ERR(dst->tag_ops);
}
@@ -546,6 +561,33 @@ static int dsa_parse_ports_dn(struct device_node *ports, struct dsa_switch *ds)
return 0;
}
+static int dsa_parse_ports(struct dsa_chip_data *cd, struct dsa_switch *ds)
+{
+ bool valid_name_found = false;
+ unsigned int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ if (!cd->port_names[i])
+ continue;
+
+ ds->ports[i].name = cd->port_names[i];
+
+ /* Initialize enabled_port_mask now for drv->setup()
+ * to have access to a correct value, just like what
+ * net/dsa/dsa.c::dsa_switch_setup_one does.
+ */
+ if (!dsa_port_is_cpu(&ds->ports[i]))
+ ds->enabled_port_mask |= 1 << i;
+
+ valid_name_found = true;
+ }
+
+ if (!valid_name_found && i == DSA_MAX_PORTS)
+ return -EINVAL;
+
+ return 0;
+}
+
static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
{
int err;
@@ -570,6 +612,18 @@ static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
return 0;
}
+static int dsa_parse_member(struct dsa_chip_data *pd, u32 *tree, u32 *index)
+{
+ if (!pd)
+ return -ENODEV;
+
+ /* We do not support complex trees with dsa_chip_data */
+ *tree = 0;
+ *index = 0;
+
+ return 0;
+}
+
static struct device_node *dsa_get_ports(struct dsa_switch *ds,
struct device_node *np)
{
@@ -586,23 +640,34 @@ static struct device_node *dsa_get_ports(struct dsa_switch *ds,
static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
{
+ struct dsa_chip_data *pdata = dev->platform_data;
struct device_node *np = dev->of_node;
struct dsa_switch_tree *dst;
struct device_node *ports;
u32 tree, index;
int i, err;
- err = dsa_parse_member_dn(np, &tree, &index);
- if (err)
- return err;
+ if (np) {
+ err = dsa_parse_member_dn(np, &tree, &index);
+ if (err)
+ return err;
- ports = dsa_get_ports(ds, np);
- if (IS_ERR(ports))
- return PTR_ERR(ports);
+ ports = dsa_get_ports(ds, np);
+ if (IS_ERR(ports))
+ return PTR_ERR(ports);
- err = dsa_parse_ports_dn(ports, ds);
- if (err)
- return err;
+ err = dsa_parse_ports_dn(ports, ds);
+ if (err)
+ return err;
+ } else {
+ err = dsa_parse_member(pdata, &tree, &index);
+ if (err)
+ return err;
+
+ err = dsa_parse_ports(pdata, ds);
+ if (err)
+ return err;
+ }
dst = dsa_get_dst(tree);
if (!dst) {
@@ -618,6 +683,7 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
ds->dst = dst;
ds->index = index;
+ ds->cd = pdata;
/* Initialize the routing table */
for (i = 0; i < DSA_MAX_SWITCHES; ++i)
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Jason Cooper <jason@lakedaemon.net>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Russell King <linux@armlinux.org.uk>,
open list <linux-kernel@vger.kernel.org>,
Gregory Clement <gregory.clement@free-electrons.com>,
"David S. Miller" <davem@davemloft.net>,
"moderated list:ARM/Marvell Dove/MV78xx0/Orion SOC support"
<linux-arm-kernel@lists.infradead.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Subject: [PATCH net-next v4 08/10] net: dsa: Add support for platform data
Date: Tue, 17 Jan 2017 15:21:50 -0800 [thread overview]
Message-ID: <20170117232152.1661-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20170117232152.1661-1-f.fainelli@gmail.com>
Allow drivers to use the new DSA API with platform data. Most of the
code in net/dsa/dsa2.c does not rely so much on device_nodes and can get
the same information from platform_data instead.
We purposely do not support distributed configurations with platform
data, so drivers should be providing a pointer to a 'struct
dsa_chip_data' structure if they wish to communicate per-port layout.
Multiple CPUs port could potentially be supported and dsa_chip_data is
extended to receive up to one reference to an upstream network device
per port described by a dsa_chip_data structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/net/dsa.h | 6 ++++
net/dsa/dsa2.c | 102 ++++++++++++++++++++++++++++++++++++++++++++----------
2 files changed, 90 insertions(+), 18 deletions(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 16a502a6c26a..491008792e4d 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -42,6 +42,11 @@ struct dsa_chip_data {
struct device *host_dev;
int sw_addr;
+ /*
+ * Reference to network devices
+ */
+ struct device *netdev[DSA_MAX_PORTS];
+
/* set to size of eeprom if supported by the switch */
int eeprom_len;
@@ -140,6 +145,7 @@ struct dsa_switch_tree {
};
struct dsa_port {
+ const char *name;
struct net_device *netdev;
struct device_node *dn;
unsigned int ageing_time;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index cd91070b5467..761e8724423f 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -79,19 +79,28 @@ static void dsa_dst_del_ds(struct dsa_switch_tree *dst,
kref_put(&dst->refcount, dsa_free_dst);
}
+/* For platform data configurations, we need to have a valid name argument to
+ * differentiate a disabled port from an enabled one
+ */
static bool dsa_port_is_valid(struct dsa_port *port)
{
- return !!port->dn;
+ return !!(port->dn || port->name);
}
static bool dsa_port_is_dsa(struct dsa_port *port)
{
- return !!of_parse_phandle(port->dn, "link", 0);
+ if (port->name && !strcmp(port->name, "dsa"))
+ return true;
+ else
+ return !!of_parse_phandle(port->dn, "link", 0);
}
static bool dsa_port_is_cpu(struct dsa_port *port)
{
- return !!of_parse_phandle(port->dn, "ethernet", 0);
+ if (port->name && !strcmp(port->name, "cpu"))
+ return true;
+ else
+ return !!of_parse_phandle(port->dn, "ethernet", 0);
}
static bool dsa_ds_find_port_dn(struct dsa_switch *ds,
@@ -251,10 +260,11 @@ static void dsa_cpu_port_unapply(struct dsa_port *port, u32 index,
static int dsa_user_port_apply(struct dsa_port *port, u32 index,
struct dsa_switch *ds)
{
- const char *name;
+ const char *name = port->name;
int err;
- name = of_get_property(port->dn, "label", NULL);
+ if (port->dn)
+ name = of_get_property(port->dn, "label", NULL);
if (!name)
name = "eth%d";
@@ -439,11 +449,15 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
struct net_device *ethernet_dev;
struct device_node *ethernet;
- ethernet = of_parse_phandle(port->dn, "ethernet", 0);
- if (!ethernet)
- return -EINVAL;
+ if (port->dn) {
+ ethernet = of_parse_phandle(port->dn, "ethernet", 0);
+ if (!ethernet)
+ return -EINVAL;
+ ethernet_dev = of_find_net_device_by_node(ethernet);
+ } else {
+ ethernet_dev = device_to_net_device(ds->cd->netdev[index]);
+ }
- ethernet_dev = of_find_net_device_by_node(ethernet);
if (!ethernet_dev)
return -EPROBE_DEFER;
@@ -462,6 +476,7 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
if (IS_ERR(dst->tag_ops)) {
dev_warn(ds->dev, "No tagger for this switch\n");
+ dev_put(ethernet_dev);
return PTR_ERR(dst->tag_ops);
}
@@ -546,6 +561,33 @@ static int dsa_parse_ports_dn(struct device_node *ports, struct dsa_switch *ds)
return 0;
}
+static int dsa_parse_ports(struct dsa_chip_data *cd, struct dsa_switch *ds)
+{
+ bool valid_name_found = false;
+ unsigned int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ if (!cd->port_names[i])
+ continue;
+
+ ds->ports[i].name = cd->port_names[i];
+
+ /* Initialize enabled_port_mask now for drv->setup()
+ * to have access to a correct value, just like what
+ * net/dsa/dsa.c::dsa_switch_setup_one does.
+ */
+ if (!dsa_port_is_cpu(&ds->ports[i]))
+ ds->enabled_port_mask |= 1 << i;
+
+ valid_name_found = true;
+ }
+
+ if (!valid_name_found && i == DSA_MAX_PORTS)
+ return -EINVAL;
+
+ return 0;
+}
+
static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
{
int err;
@@ -570,6 +612,18 @@ static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
return 0;
}
+static int dsa_parse_member(struct dsa_chip_data *pd, u32 *tree, u32 *index)
+{
+ if (!pd)
+ return -ENODEV;
+
+ /* We do not support complex trees with dsa_chip_data */
+ *tree = 0;
+ *index = 0;
+
+ return 0;
+}
+
static struct device_node *dsa_get_ports(struct dsa_switch *ds,
struct device_node *np)
{
@@ -586,23 +640,34 @@ static struct device_node *dsa_get_ports(struct dsa_switch *ds,
static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
{
+ struct dsa_chip_data *pdata = dev->platform_data;
struct device_node *np = dev->of_node;
struct dsa_switch_tree *dst;
struct device_node *ports;
u32 tree, index;
int i, err;
- err = dsa_parse_member_dn(np, &tree, &index);
- if (err)
- return err;
+ if (np) {
+ err = dsa_parse_member_dn(np, &tree, &index);
+ if (err)
+ return err;
- ports = dsa_get_ports(ds, np);
- if (IS_ERR(ports))
- return PTR_ERR(ports);
+ ports = dsa_get_ports(ds, np);
+ if (IS_ERR(ports))
+ return PTR_ERR(ports);
- err = dsa_parse_ports_dn(ports, ds);
- if (err)
- return err;
+ err = dsa_parse_ports_dn(ports, ds);
+ if (err)
+ return err;
+ } else {
+ err = dsa_parse_member(pdata, &tree, &index);
+ if (err)
+ return err;
+
+ err = dsa_parse_ports(pdata, ds);
+ if (err)
+ return err;
+ }
dst = dsa_get_dst(tree);
if (!dst) {
@@ -618,6 +683,7 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
ds->dst = dst;
ds->index = index;
+ ds->cd = pdata;
/* Initialize the routing table */
for (i = 0; i < DSA_MAX_SWITCHES; ++i)
--
2.9.3
next prev parent reply other threads:[~2017-01-17 23:21 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-17 23:21 [PATCH net-next v4 00/10] net: dsa: Support for pdata in dsa2 Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 01/10] net: dsa: Pass device pointer to dsa_register_switch Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 02/10] net: dsa: Make most functions take a dsa_port argument Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 03/10] net: dsa: Suffix function manipulating device_node with _dn Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 04/10] net: dsa: Move ports assignment closer to error checking Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 05/10] drivers: base: Add device_find_in_class_name() Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:34 ` Andy Shevchenko
2017-01-17 23:34 ` Andy Shevchenko
2017-01-17 23:43 ` Florian Fainelli
2017-01-17 23:43 ` Florian Fainelli
2017-01-17 23:43 ` Florian Fainelli
2017-01-18 0:00 ` Andy Shevchenko
2017-01-18 0:00 ` Andy Shevchenko
2017-01-18 0:04 ` Florian Fainelli
2017-01-18 0:04 ` Florian Fainelli
2017-01-18 0:07 ` Andy Shevchenko
2017-01-18 0:07 ` Andy Shevchenko
2017-01-18 0:13 ` Florian Fainelli
2017-01-18 0:13 ` Florian Fainelli
2017-01-18 0:13 ` Florian Fainelli
2017-01-18 7:06 ` Greg Kroah-Hartman
2017-01-18 7:06 ` Greg Kroah-Hartman
2017-01-18 7:06 ` Greg Kroah-Hartman
2017-01-17 23:21 ` [PATCH net-next v4 06/10] net: dsa: Migrate to device_find_in_class_name() Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 07/10] net: Relocate dev_to_net_device() into net/core/dev.c Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli [this message]
2017-01-17 23:21 ` [PATCH net-next v4 08/10] net: dsa: Add support for platform data Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 09/10] net: phy: Allow pre-declaration of MDIO devices Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-17 23:21 ` [PATCH net-next v4 10/10] ARM: orion: Register DSA switch as a MDIO device Florian Fainelli
2017-01-17 23:21 ` Florian Fainelli
2017-01-18 21:50 ` [PATCH net-next v4 00/10] net: dsa: Support for pdata in dsa2 David Miller
2017-01-18 21:50 ` David Miller
2017-01-18 22:06 ` Florian Fainelli
2017-01-18 22:06 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170117232152.1661-9-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.