From: "'Marcelo Ricardo Leitner'" <marcelo.leitner@gmail.com>
To: David Laight <David.Laight@ACULAB.COM>
Cc: 'Xin Long' <lucien.xin@gmail.com>,
network dev <netdev@vger.kernel.org>,
"linux-sctp@vger.kernel.org" <linux-sctp@vger.kernel.org>,
Neil Horman <nhorman@tuxdriver.com>,
Vlad Yasevich <vyasevich@gmail.com>,
"davem@davemloft.net" <davem@davemloft.net>
Subject: Re: [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre
Date: Mon, 23 Jan 2017 12:36:28 +0000 [thread overview]
Message-ID: <20170123123628.GX3781@localhost.localdomain> (raw)
In-Reply-To: <063D6719AE5E284EB5DD2968C1650D6DB026B8E0@AcuExch.aculab.com>
On Mon, Jan 23, 2017 at 12:26:12PM +0000, David Laight wrote:
> From: Marcelo Ricardo Leitner > Sent: 20 January 2017 16:39
> > To: David Laight
> > On Fri, Jan 20, 2017 at 02:50:01PM +0000, David Laight wrote:
> > > From: Xin Long
> > > > Sent: 19 January 2017 17:19
> > > > This patch is to define Add Incoming/Outgoing Streams Request
> > > > Parameter described in rfc6525 section 4.5 and 4.6. They can
> > > > be in one same chunk trunk as rfc6525 section 3.1-7 describes,
> > > > so make them in one function.
> > > ...
> > > > +struct sctp_strreset_addstrm {
> > > > + sctp_paramhdr_t param_hdr;
> > > > + __u32 request_seq;
> > > > + __u16 number_of_streams;
> > > > + __u16 reserved;
> > > > +} __packed;
> > > ...
> > > > + addstrm.param_hdr.type = SCTP_PARAM_RESET_ADD_OUT_STREAMS;
> > > > + addstrm.param_hdr.length = htons(size);
> > > > + addstrm.number_of_streams = htons(out);
> > > > + addstrm.request_seq = htonl(asoc->strreset_outseq);
> > > > + addstrm.reserved = 0;
> > > > +
> > > > + sctp_addto_chunk(retval, size, &addstrm);
> > >
> > > Since you allocate the sctp_strreset_addstrm structure on stack
> > > there is no requirement for it to be packed.
> >
> > It shouldn't matter that it's allocated on stack. Why should it?
> > We need it to be packed as this is a header that will be sent out to
> > another peer, so there can't be any padding on it.
>
> That isn't what __packed means.
> It means that the compiler must assume that the structure can be
> misaligned in memory and must use byte memory accesses on systems
> that fault misaligned memory accesses.
That's a side-effect of it.
https://gcc.gnu.org/onlinedocs/gcc/Common-Type-Attributes.html#Common-Type-Attributes
"This attribute, attached to struct or union type definition, specifies
that each member (other than zero-width bit-fields) of the structure or
union is placed to minimize the memory required. "
So, no padding. A field just after the other, which is what we want on a
network header.
Marcelo
WARNING: multiple messages have this Message-ID (diff)
From: "'Marcelo Ricardo Leitner'" <marcelo.leitner@gmail.com>
To: David Laight <David.Laight@ACULAB.COM>
Cc: "'Xin Long'" <lucien.xin@gmail.com>,
network dev <netdev@vger.kernel.org>,
"linux-sctp@vger.kernel.org" <linux-sctp@vger.kernel.org>,
Neil Horman <nhorman@tuxdriver.com>,
Vlad Yasevich <vyasevich@gmail.com>,
"davem@davemloft.net" <davem@davemloft.net>
Subject: Re: [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk
Date: Mon, 23 Jan 2017 10:36:28 -0200 [thread overview]
Message-ID: <20170123123628.GX3781@localhost.localdomain> (raw)
In-Reply-To: <063D6719AE5E284EB5DD2968C1650D6DB026B8E0@AcuExch.aculab.com>
On Mon, Jan 23, 2017 at 12:26:12PM +0000, David Laight wrote:
> From: Marcelo Ricardo Leitner > Sent: 20 January 2017 16:39
> > To: David Laight
> > On Fri, Jan 20, 2017 at 02:50:01PM +0000, David Laight wrote:
> > > From: Xin Long
> > > > Sent: 19 January 2017 17:19
> > > > This patch is to define Add Incoming/Outgoing Streams Request
> > > > Parameter described in rfc6525 section 4.5 and 4.6. They can
> > > > be in one same chunk trunk as rfc6525 section 3.1-7 describes,
> > > > so make them in one function.
> > > ...
> > > > +struct sctp_strreset_addstrm {
> > > > + sctp_paramhdr_t param_hdr;
> > > > + __u32 request_seq;
> > > > + __u16 number_of_streams;
> > > > + __u16 reserved;
> > > > +} __packed;
> > > ...
> > > > + addstrm.param_hdr.type = SCTP_PARAM_RESET_ADD_OUT_STREAMS;
> > > > + addstrm.param_hdr.length = htons(size);
> > > > + addstrm.number_of_streams = htons(out);
> > > > + addstrm.request_seq = htonl(asoc->strreset_outseq);
> > > > + addstrm.reserved = 0;
> > > > +
> > > > + sctp_addto_chunk(retval, size, &addstrm);
> > >
> > > Since you allocate the sctp_strreset_addstrm structure on stack
> > > there is no requirement for it to be packed.
> >
> > It shouldn't matter that it's allocated on stack. Why should it?
> > We need it to be packed as this is a header that will be sent out to
> > another peer, so there can't be any padding on it.
>
> That isn't what __packed means.
> It means that the compiler must assume that the structure can be
> misaligned in memory and must use byte memory accesses on systems
> that fault misaligned memory accesses.
That's a side-effect of it.
https://gcc.gnu.org/onlinedocs/gcc/Common-Type-Attributes.html#Common-Type-Attributes
"This attribute, attached to struct or union type definition, specifies
that each member (other than zero-width bit-fields) of the structure or
union is placed to minimize the memory required. "
So, no padding. A field just after the other, which is what we want on a
network header.
Marcelo
next prev parent reply other threads:[~2017-01-23 12:36 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-19 17:19 [PATCHv3 net-next 0/4] sctp: add sender-side procedures for stream reconf asoc reset and add streams Xin Long
2017-01-19 17:19 ` Xin Long
2017-01-19 17:19 ` [PATCHv3 net-next 1/4] sctp: add support for generating stream reconf ssn/tsn reset request chunk Xin Long
2017-01-19 17:19 ` Xin Long
2017-01-19 17:19 ` [PATCHv3 net-next 2/4] sctp: implement sender-side procedures for SSN/TSN Reset Request Parameter Xin Long
2017-01-19 17:19 ` Xin Long
2017-01-19 17:19 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams Xin Long
2017-01-19 17:19 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk Xin Long
2017-01-19 17:19 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Requ Xin Long
2017-01-19 17:19 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Xin Long
2017-01-19 20:17 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Neil Horman
2017-01-19 20:17 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Neil Horman
2017-01-19 22:18 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-01-19 22:18 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Marcelo Ricardo Leitner
2017-01-23 14:50 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Neil Horman
2017-01-23 14:50 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Neil Horman
2017-01-19 21:47 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-01-19 21:47 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Marcelo Ricardo Leitner
2017-01-20 8:56 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Xin Long
2017-01-20 8:56 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Xin Long
2017-01-20 11:43 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-01-20 11:43 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Marcelo Ricardo Leitner
2017-01-19 22:15 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-01-19 22:15 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Marcelo Ricardo Leitner
2017-01-20 8:51 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Xin Long
2017-01-20 8:51 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Xin Long
2017-01-23 11:25 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams David Laight
2017-01-23 11:25 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter David Laight
2017-01-23 14:53 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Neil Horman
2017-01-23 14:53 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Neil Horman
2017-01-23 16:02 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-01-23 16:02 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Marcelo Ricardo Leitner
2017-01-24 12:35 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams David Laight
2017-01-24 12:35 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter David Laight
2017-01-24 13:08 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams 'Marcelo Ricardo Leitner'
2017-01-24 13:08 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter 'Marcelo Ricardo Leitner'
2017-01-23 18:47 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-01-23 18:47 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter Marcelo Ricardo Leitner
2017-01-24 12:34 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams David Laight
2017-01-24 12:34 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter David Laight
2017-01-24 13:10 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams 'Marcelo Ricardo Leitner'
2017-01-24 13:10 ` [PATCHv3 net-next 4/4] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter 'Marcelo Ricardo Leitner'
2017-01-20 14:50 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre David Laight
2017-01-20 14:50 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk David Laight
2017-01-20 16:39 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre Marcelo Ricardo Leitner
2017-01-20 16:39 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk Marcelo Ricardo Leitner
2017-01-23 12:26 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre David Laight
2017-01-23 12:26 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk David Laight
2017-01-23 12:36 ` 'Marcelo Ricardo Leitner' [this message]
2017-01-23 12:36 ` 'Marcelo Ricardo Leitner'
2017-01-23 16:00 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre David Miller
2017-01-23 16:00 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk David Miller
2017-01-23 16:14 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre marcelo.leitner
2017-01-23 16:14 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk marcelo.leitner
2017-01-23 16:17 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre David Miller
2017-01-23 16:17 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk David Miller
2017-01-23 15:58 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre David Miller
2017-01-23 15:58 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk David Miller
2017-01-29 14:31 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre marcelo.leitner
2017-01-29 14:31 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk marcelo.leitner
2017-01-29 18:41 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing stre David Miller
2017-01-29 18:41 ` [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk David Miller
2017-01-19 22:02 ` [PATCHv3 net-next 2/4] sctp: implement sender-side procedures for SSN/TSN Reset Request Paramete Marcelo Ricardo Leitner
2017-01-19 22:02 ` [PATCHv3 net-next 2/4] sctp: implement sender-side procedures for SSN/TSN Reset Request Parameter Marcelo Ricardo Leitner
2017-01-20 8:21 ` [PATCHv3 net-next 2/4] sctp: implement sender-side procedures for SSN/TSN Reset Request Paramete Xin Long
2017-01-20 8:21 ` [PATCHv3 net-next 2/4] sctp: implement sender-side procedures for SSN/TSN Reset Request Parameter Xin Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170123123628.GX3781@localhost.localdomain \
--to=marcelo.leitner@gmail.com \
--cc=David.Laight@ACULAB.COM \
--cc=davem@davemloft.net \
--cc=linux-sctp@vger.kernel.org \
--cc=lucien.xin@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=vyasevich@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.