All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Duyck <alexander.duyck@gmail.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [next PATCH v3 3/9] igb: Clear Rx buffer_info in configure instead of clean
Date: Mon, 23 Jan 2017 08:58:35 -0800	[thread overview]
Message-ID: <20170123165831.13402.48374.stgit@localhost.localdomain> (raw)
In-Reply-To: <20170123165647.13402.1254.stgit@localhost.localdomain>

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes it so that instead of going through the entire ring on Rx
cleanup we only go through the region that was designated to be cleaned up
and stop when we reach the region where new allocations should start.

In addition we can avoid having to perform a memset on the Rx buffer_info
structures until we are about to start using the ring again.  By deferring
this we can avoid dirtying the cache any more than we have to which can
help to improve the time needed to bring the interface down and then back
up again in a reset or suspend/resume cycle.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 91a524b155ce..79a8f3a3356e 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3435,7 +3435,7 @@ int igb_setup_rx_resources(struct igb_ring *rx_ring)
 
 	size = sizeof(struct igb_rx_buffer) * rx_ring->count;
 
-	rx_ring->rx_buffer_info = vzalloc(size);
+	rx_ring->rx_buffer_info = vmalloc(size);
 	if (!rx_ring->rx_buffer_info)
 		goto err;
 
@@ -3759,6 +3759,10 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
 	rxdctl |= IGB_RX_HTHRESH << 8;
 	rxdctl |= IGB_RX_WTHRESH << 16;
 
+	/* initialize rx_buffer_info */
+	memset(ring->rx_buffer_info, 0,
+	       sizeof(struct igb_rx_buffer) * ring->count);
+
 	/* initialize Rx descriptor 0 */
 	rx_desc = IGB_RX_DESC(ring, 0);
 	rx_desc->wb.upper.length = 0;
@@ -3937,23 +3941,16 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter)
  **/
 static void igb_clean_rx_ring(struct igb_ring *rx_ring)
 {
-	unsigned long size;
-	u16 i;
+	u16 i = rx_ring->next_to_clean;
 
 	if (rx_ring->skb)
 		dev_kfree_skb(rx_ring->skb);
 	rx_ring->skb = NULL;
 
-	if (!rx_ring->rx_buffer_info)
-		return;
-
 	/* Free all the Rx ring sk_buffs */
-	for (i = 0; i < rx_ring->count; i++) {
+	while (i != rx_ring->next_to_alloc) {
 		struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
 
-		if (!buffer_info->page)
-			continue;
-
 		/* Invalidate cache lines that may have been written to by
 		 * device so that we avoid corrupting memory.
 		 */
@@ -3972,12 +3969,11 @@ static void igb_clean_rx_ring(struct igb_ring *rx_ring)
 		__page_frag_cache_drain(buffer_info->page,
 					buffer_info->pagecnt_bias);
 
-		buffer_info->page = NULL;
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
 	}
 
-	size = sizeof(struct igb_rx_buffer) * rx_ring->count;
-	memset(rx_ring->rx_buffer_info, 0, size);
-
 	rx_ring->next_to_alloc = 0;
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;


  parent reply	other threads:[~2017-01-23 16:58 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-23 16:57 [Intel-wired-lan] [next PATCH v3 0/9] igb: Add support for writable pages and build_skb Alexander Duyck
2017-01-23 16:58 ` [Intel-wired-lan] [next PATCH v3 1/9] igb: Add support for DMA_ATTR_WEAK_ORDERING Alexander Duyck
2017-01-23 16:58 ` [Intel-wired-lan] [next PATCH v3 2/9] igb: Use length to determine if descriptor is done Alexander Duyck
2017-01-23 16:58 ` Alexander Duyck [this message]
2017-01-23 16:58 ` [Intel-wired-lan] [next PATCH v3 4/9] igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 5/9] igb: Limit maximum frame Rx based on MTU Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 6/9] igb: Add support for padding packet Alexander Duyck
2017-02-03  4:01   ` Brown, Aaron F
2017-02-03 17:58     ` Alexander Duyck
2017-02-04  0:39       ` Brown, Aaron F
2017-02-06  4:44         ` Alexander Duyck
2017-02-06 23:20           ` Brown, Aaron F
2017-02-07  1:15           ` Brown, Aaron F
2017-02-07  1:51             ` Alexander Duyck
2017-02-07  2:11               ` Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 7/9] igb: Add support for ethtool private flag to allow use of legacy Rx Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 8/9] igb: Break out Rx buffer page management Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 9/9] igb: Re-add support for build_skb in igb Alexander Duyck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170123165831.13402.48374.stgit@localhost.localdomain \
    --to=alexander.duyck@gmail.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.