From: Alexander Duyck <alexander.duyck@gmail.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [next PATCH v3 4/9] igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring
Date: Mon, 23 Jan 2017 08:58:50 -0800 [thread overview]
Message-ID: <20170123165841.13402.96970.stgit@localhost.localdomain> (raw)
In-Reply-To: <20170123165647.13402.1254.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
In the case of the Tx rings we need to only clear the Tx buffer_info when
we are resetting the rings. Ideally we do this when we configure the ring
to bring it back up instead of when we are taking it down in order to avoid
dirtying pages we don't need to.
In addition we don't need to clear the Tx descriptor ring since we will
fully repopulate it when we begin transmitting frames and next_to_watch can
be cleared to prevent the ring from being cleaned beyond that point instead
of needing to touch anything in the Tx descriptor ring.
Finally with these changes we can avoid having to reset the skb member of
the Tx buffer_info structure in the cleanup path since the skb will always
be associated with the first buffer which has next_to_watch set.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
v2: Fixed Tx mapping exception path to reset tx_buffer address
drivers/net/ethernet/intel/igb/igb.h | 1
drivers/net/ethernet/intel/igb/igb_ethtool.c | 11 ++
drivers/net/ethernet/intel/igb/igb_main.c | 120 ++++++++++++++++----------
3 files changed, 83 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 87c9fe9d6f18..a638254f4e06 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -594,7 +594,6 @@ enum igb_boards {
void igb_setup_tctl(struct igb_adapter *);
void igb_setup_rctl(struct igb_adapter *);
netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *);
-void igb_unmap_and_free_tx_resource(struct igb_ring *, struct igb_tx_buffer *);
void igb_alloc_rx_buffers(struct igb_ring *, u16);
void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *);
bool igb_has_link(struct igb_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 3f5f7744c90f..612cf13b7a3a 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -1833,7 +1833,16 @@ static int igb_clean_test_rings(struct igb_ring *rx_ring,
/* unmap buffer on Tx side */
tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
- igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+
+ /* Free all the Tx ring sk_buffs */
+ dev_kfree_skb_any(tx_buffer_info->skb);
+
+ /* unmap skb header data */
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer_info, dma),
+ dma_unmap_len(tx_buffer_info, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer_info, len, 0);
/* increment Rx/Tx next to clean counters */
rx_ntc++;
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 79a8f3a3356e..3f3ae098e39a 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3293,7 +3293,7 @@ int igb_setup_tx_resources(struct igb_ring *tx_ring)
size = sizeof(struct igb_tx_buffer) * tx_ring->count;
- tx_ring->tx_buffer_info = vzalloc(size);
+ tx_ring->tx_buffer_info = vmalloc(size);
if (!tx_ring->tx_buffer_info)
goto err;
@@ -3404,6 +3404,10 @@ void igb_configure_tx_ring(struct igb_adapter *adapter,
txdctl |= IGB_TX_HTHRESH << 8;
txdctl |= IGB_TX_WTHRESH << 16;
+ /* reinitialize tx_buffer_info */
+ memset(ring->tx_buffer_info, 0,
+ sizeof(struct igb_tx_buffer) * ring->count);
+
txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
wr32(E1000_TXDCTL(reg_idx), txdctl);
}
@@ -3831,55 +3835,63 @@ static void igb_free_all_tx_resources(struct igb_adapter *adapter)
igb_free_tx_resources(adapter->tx_ring[i]);
}
-void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
- struct igb_tx_buffer *tx_buffer)
-{
- if (tx_buffer->skb) {
- dev_kfree_skb_any(tx_buffer->skb);
- if (dma_unmap_len(tx_buffer, len))
- dma_unmap_single(ring->dev,
- dma_unmap_addr(tx_buffer, dma),
- dma_unmap_len(tx_buffer, len),
- DMA_TO_DEVICE);
- } else if (dma_unmap_len(tx_buffer, len)) {
- dma_unmap_page(ring->dev,
- dma_unmap_addr(tx_buffer, dma),
- dma_unmap_len(tx_buffer, len),
- DMA_TO_DEVICE);
- }
- tx_buffer->next_to_watch = NULL;
- tx_buffer->skb = NULL;
- dma_unmap_len_set(tx_buffer, len, 0);
- /* buffer_info must be completely set up in the transmit path */
-}
-
/**
* igb_clean_tx_ring - Free Tx Buffers
* @tx_ring: ring to be cleaned
**/
static void igb_clean_tx_ring(struct igb_ring *tx_ring)
{
- struct igb_tx_buffer *buffer_info;
- unsigned long size;
- u16 i;
+ u16 i = tx_ring->next_to_clean;
+ struct igb_tx_buffer *tx_buffer = &tx_ring->tx_buffer_info[i];
- if (!tx_ring->tx_buffer_info)
- return;
- /* Free all the Tx ring sk_buffs */
+ while (i != tx_ring->next_to_use) {
+ union e1000_adv_tx_desc *eop_desc, *tx_desc;
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->tx_buffer_info[i];
- igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
- }
+ /* Free all the Tx ring sk_buffs */
+ dev_kfree_skb_any(tx_buffer->skb);
- netdev_tx_reset_queue(txring_txq(tx_ring));
+ /* unmap skb header data */
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
- size = sizeof(struct igb_tx_buffer) * tx_ring->count;
- memset(tx_ring->tx_buffer_info, 0, size);
+ /* check for eop_desc to determine the end of the packet */
+ eop_desc = tx_buffer->next_to_watch;
+ tx_desc = IGB_TX_DESC(tx_ring, i);
- /* Zero out the descriptor ring */
- memset(tx_ring->desc, 0, tx_ring->size);
+ /* unmap remaining buffers */
+ while (tx_desc != eop_desc) {
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(i == tx_ring->count)) {
+ i = 0;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+ /* unmap any remaining paged data */
+ if (dma_unmap_len(tx_buffer, len))
+ dma_unmap_page(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ }
+
+ /* move us one more past the eop_desc for start of next pkt */
+ tx_buffer++;
+ i++;
+ if (unlikely(i == tx_ring->count)) {
+ i = 0;
+ tx_buffer = tx_ring->tx_buffer_info;
+ }
+ }
+
+ /* reset BQL for queue */
+ netdev_tx_reset_queue(txring_txq(tx_ring));
+
+ /* reset next_to_use and next_to_clean */
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
}
@@ -5254,18 +5266,32 @@ static void igb_tx_map(struct igb_ring *tx_ring,
dma_error:
dev_err(tx_ring->dev, "TX DMA map failed\n");
+ tx_buffer = &tx_ring->tx_buffer_info[i];
/* clear dma mappings for failed tx_buffer_info map */
- for (;;) {
+ while (tx_buffer != first) {
+ if (dma_unmap_len(tx_buffer, len))
+ dma_unmap_page(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer, len, 0);
+
+ if (i--)
+ i += tx_ring->count;
tx_buffer = &tx_ring->tx_buffer_info[i];
- igb_unmap_and_free_tx_resource(tx_ring, tx_buffer);
- if (tx_buffer == first)
- break;
- if (i == 0)
- i = tx_ring->count;
- i--;
}
+ if (dma_unmap_len(tx_buffer, len))
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer, len, 0);
+
+ dev_kfree_skb_any(tx_buffer->skb);
+ tx_buffer->skb = NULL;
+
tx_ring->next_to_use = i;
}
@@ -5337,7 +5363,8 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
return NETDEV_TX_OK;
out_drop:
- igb_unmap_and_free_tx_resource(tx_ring, first);
+ dev_kfree_skb_any(first->skb);
+ first->skb = NULL;
return NETDEV_TX_OK;
}
@@ -6686,7 +6713,6 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector, int napi_budget)
DMA_TO_DEVICE);
/* clear tx_buffer data */
- tx_buffer->skb = NULL;
dma_unmap_len_set(tx_buffer, len, 0);
/* clear last DMA location and unmap remaining buffers */
next prev parent reply other threads:[~2017-01-23 16:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-23 16:57 [Intel-wired-lan] [next PATCH v3 0/9] igb: Add support for writable pages and build_skb Alexander Duyck
2017-01-23 16:58 ` [Intel-wired-lan] [next PATCH v3 1/9] igb: Add support for DMA_ATTR_WEAK_ORDERING Alexander Duyck
2017-01-23 16:58 ` [Intel-wired-lan] [next PATCH v3 2/9] igb: Use length to determine if descriptor is done Alexander Duyck
2017-01-23 16:58 ` [Intel-wired-lan] [next PATCH v3 3/9] igb: Clear Rx buffer_info in configure instead of clean Alexander Duyck
2017-01-23 16:58 ` Alexander Duyck [this message]
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 5/9] igb: Limit maximum frame Rx based on MTU Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 6/9] igb: Add support for padding packet Alexander Duyck
2017-02-03 4:01 ` Brown, Aaron F
2017-02-03 17:58 ` Alexander Duyck
2017-02-04 0:39 ` Brown, Aaron F
2017-02-06 4:44 ` Alexander Duyck
2017-02-06 23:20 ` Brown, Aaron F
2017-02-07 1:15 ` Brown, Aaron F
2017-02-07 1:51 ` Alexander Duyck
2017-02-07 2:11 ` Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 7/9] igb: Add support for ethtool private flag to allow use of legacy Rx Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 8/9] igb: Break out Rx buffer page management Alexander Duyck
2017-01-23 16:59 ` [Intel-wired-lan] [next PATCH v3 9/9] igb: Re-add support for build_skb in igb Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170123165841.13402.96970.stgit@localhost.localdomain \
--to=alexander.duyck@gmail.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.