From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org
Cc: David.Carroll@microsemi.com, Gana.Sridaran@microsemi.com,
RaghavaAditya.Renukunta@microsemi.com,
Scott.Benesh@microsemi.com
Subject: [PATCH V2 16/24] aacraid: Add task management functionality
Date: Wed, 25 Jan 2017 10:01:03 -0800 [thread overview]
Message-ID: <20170125180111.25401-17-RaghavaAditya.Renukunta@microsemi.com> (raw)
In-Reply-To: <20170125180111.25401-1-RaghavaAditya.Renukunta@microsemi.com>
Added support to send out task management commands.
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Dave Carroll <David.Carroll@microsemi.com>
---
Changes in V2:
Fixed overflow warning
drivers/scsi/aacraid/aachba.c | 364 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 360 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index d134c8d..a5a195c 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -217,9 +217,13 @@ static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg);
static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg);
static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
struct aac_raw_io2 *rio2, int sg_max);
+static long aac_build_sghba(struct scsi_cmnd *scsicmd,
+ struct aac_hba_cmd_req *hbacmd,
+ int sg_max, u64 sg_address);
static int aac_convert_sgraw2(struct aac_raw_io2 *rio2,
int pages, int nseg, int nseg_new);
static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
+static int aac_send_hba_fib(struct scsi_cmnd *scsicmd);
#ifdef AAC_DETAILED_STATUS_INFO
static char *aac_get_status_string(u32 status);
#endif
@@ -1446,6 +1450,52 @@ static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd
return srbcmd;
}
+static struct aac_hba_cmd_req *aac_construct_hbacmd(struct fib *fib,
+ struct scsi_cmnd *cmd)
+{
+ struct aac_hba_cmd_req *hbacmd;
+ struct aac_dev *dev;
+ int bus, target;
+ u64 address;
+
+ dev = (struct aac_dev *)cmd->device->host->hostdata;
+
+ hbacmd = (struct aac_hba_cmd_req *)fib->hw_fib_va;
+ memset(hbacmd, 0, 96); /* sizeof(*hbacmd) is not necessary */
+ /* iu_type is a parameter of aac_hba_send */
+ switch (cmd->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ hbacmd->byte1 = 2;
+ break;
+ case DMA_FROM_DEVICE:
+ case DMA_BIDIRECTIONAL:
+ hbacmd->byte1 = 1;
+ break;
+ case DMA_NONE:
+ default:
+ break;
+ }
+ hbacmd->lun[1] = cpu_to_le32(cmd->device->lun);
+
+ bus = aac_logical_to_phys(scmd_channel(cmd));
+ target = scmd_id(cmd);
+ hbacmd->it_nexus = dev->hba_map[bus][target].rmw_nexus;
+
+ /* we fill in reply_qid later in aac_src_deliver_message */
+ /* we fill in iu_type, request_id later in aac_hba_send */
+ /* we fill in emb_data_desc_count later in aac_build_sghba */
+
+ memcpy(hbacmd->cdb, cmd->cmnd, cmd->cmd_len);
+ hbacmd->data_length = cpu_to_le32(scsi_bufflen(cmd));
+
+ address = (u64)fib->hw_error_pa;
+ hbacmd->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
+ hbacmd->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff));
+ hbacmd->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
+
+ return hbacmd;
+}
+
static void aac_srb_callback(void *context, struct fib * fibptr);
static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
@@ -1516,6 +1566,31 @@ static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd)
return aac_scsi_32(fib, cmd);
}
+static int aac_adapter_hba(struct fib *fib, struct scsi_cmnd *cmd)
+{
+ struct aac_hba_cmd_req *hbacmd = aac_construct_hbacmd(fib, cmd);
+ struct aac_dev *dev;
+ // u16 fibsize;
+ long ret;
+
+ dev = (struct aac_dev *)cmd->device->host->hostdata;
+
+ ret = aac_build_sghba(cmd, hbacmd,
+ dev->scsi_host_ptr->sg_tablesize, (u64)fib->hw_sgl_pa);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Now send the HBA command to the adapter
+ */
+ fib->hbacmd_size = 64 + le32_to_cpu(hbacmd->emb_data_desc_count) *
+ sizeof(struct aac_hba_sgl);
+
+ return aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ, fib,
+ (fib_callback) aac_hba_callback,
+ (void *) cmd);
+}
+
int aac_issue_bmic_identify(struct aac_dev *dev, u32 bus, u32 target)
{
struct fib *fibptr;
@@ -1528,6 +1603,7 @@ int aac_issue_bmic_identify(struct aac_dev *dev, u32 bus, u32 target)
u32 vbus, vid;
u16 temp;
+
fibptr = aac_fib_alloc(dev);
if (!fibptr)
return -ENOMEM;
@@ -2003,6 +2079,11 @@ int aac_get_adapter_info(struct aac_dev* dev)
(dev->scsi_host_ptr->sg_tablesize * 8) + 112;
}
}
+ if (!dev->sync_mode && dev->sa_firmware &&
+ dev->scsi_host_ptr->sg_tablesize > HBA_MAX_SG_SEPARATE)
+ dev->scsi_host_ptr->sg_tablesize = dev->sg_tablesize =
+ HBA_MAX_SG_SEPARATE;
+
/* FIB should be freed only after getting the response from the F/W */
if (rcode != -ERESTARTSYS) {
aac_fib_complete(fibptr);
@@ -2559,7 +2640,7 @@ static int aac_start_stop(struct scsi_cmnd *scsicmd)
int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
{
- u32 cid;
+ u32 cid, bus;
struct Scsi_Host *host = scsicmd->device->host;
struct aac_dev *dev = (struct aac_dev *)host->hostdata;
struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
@@ -2605,8 +2686,24 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
}
}
} else { /* check for physical non-dasd devices */
- if (dev->nondasd_support || expose_physicals ||
- dev->jbod) {
+ bus = aac_logical_to_phys(scmd_channel(scsicmd));
+ if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS &&
+ (dev->hba_map[bus][cid].expose
+ == AAC_HIDE_DISK)){
+ if (scsicmd->cmnd[0] == INQUIRY) {
+ scsicmd->result = DID_NO_CONNECT << 16;
+ goto scsi_done_ret;
+ }
+ }
+
+ if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS &&
+ dev->hba_map[bus][cid].devtype
+ == AAC_DEVTYPE_NATIVE_RAW) {
+ if (dev->in_reset)
+ return -1;
+ return aac_send_hba_fib(scsicmd);
+ } else if (dev->nondasd_support || expose_physicals ||
+ dev->jbod) {
if (dev->in_reset)
return -1;
return aac_send_srb_fib(scsicmd);
@@ -3365,7 +3462,151 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
/**
*
- * aac_send_scb_fib
+ * aac_hba_callback
+ * @context: the context set in the fib - here it is scsi cmd
+ * @fibptr: pointer to the fib
+ *
+ * Handles the completion of a native HBA scsi command
+ *
+ */
+void aac_hba_callback(void *context, struct fib *fibptr)
+{
+ struct aac_dev *dev;
+ struct scsi_cmnd *scsicmd;
+
+ scsicmd = (struct scsi_cmnd *) context;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return;
+
+ WARN_ON(fibptr == NULL);
+ dev = fibptr->dev;
+
+ if (!(fibptr->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF))
+ scsi_dma_unmap(scsicmd);
+
+ if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
+ /* fast response */
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ } else {
+ struct aac_hba_resp *err =
+ &((struct aac_native_hba *)fibptr->hw_fib_va)->resp.err;
+
+ // BUG_ON(err->iu_type != HBA_IU_TYPE_RESP);
+ if (err->service_response == HBA_RESP_SVCRES_TASK_COMPLETE) {
+ scsicmd->result = err->status;
+ /* set residual count */
+ scsi_set_resid(scsicmd,
+ le32_to_cpu(err->residual_count));
+
+ switch (err->status) {
+ case SAM_STAT_GOOD:
+ scsicmd->result |= DID_OK << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ case SAM_STAT_CHECK_CONDITION:
+ {
+ int len;
+
+ len = min_t(u8, err->sense_response_data_len,
+ SCSI_SENSE_BUFFERSIZE);
+ if (len)
+ memcpy(scsicmd->sense_buffer,
+ err->sense_response_buf, len);
+ scsicmd->result |= DID_OK << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ }
+ case SAM_STAT_BUSY:
+ scsicmd->result |= DID_BUS_BUSY << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ case SAM_STAT_TASK_ABORTED:
+ scsicmd->result |= DID_ABORT << 16 |
+ ABORT << 8;
+ break;
+ case SAM_STAT_RESERVATION_CONFLICT:
+ case SAM_STAT_TASK_SET_FULL:
+ default:
+ scsicmd->result |= DID_ERROR << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ }
+ } else if (err->service_response == HBA_RESP_SVCRES_FAILURE) {
+ switch (err->status) {
+ case HBA_RESP_STAT_HBAMODE_DISABLED:
+ {
+ u32 bus, cid;
+
+ bus = aac_logical_to_phys(
+ scmd_channel(scsicmd));
+ cid = scmd_id(scsicmd);
+ if (dev->hba_map[bus][cid].devtype ==
+ AAC_DEVTYPE_NATIVE_RAW) {
+ dev->hba_map[bus][cid].devtype =
+ AAC_DEVTYPE_ARC_RAW;
+ dev->hba_map[bus][cid].rmw_nexus =
+ 0xffffffff;
+ }
+ scsicmd->result = DID_NO_CONNECT << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ }
+ case HBA_RESP_STAT_IO_ERROR:
+ case HBA_RESP_STAT_NO_PATH_TO_DEVICE:
+ scsicmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8 | SAM_STAT_BUSY;
+ break;
+ case HBA_RESP_STAT_IO_ABORTED:
+ scsicmd->result = DID_ABORT << 16 |
+ ABORT << 8;
+ break;
+ case HBA_RESP_STAT_INVALID_DEVICE:
+ scsicmd->result = DID_NO_CONNECT << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ case HBA_RESP_STAT_UNDERRUN:
+ /* UNDERRUN is OK */
+ scsicmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ case HBA_RESP_STAT_OVERRUN:
+ default:
+ scsicmd->result = DID_ERROR << 16 |
+ COMMAND_COMPLETE << 8;
+ break;
+ }
+ } else if (err->service_response ==
+ HBA_RESP_SVCRES_TMF_REJECTED) {
+ scsicmd->result =
+ DID_ERROR << 16 | MESSAGE_REJECT << 8;
+ } else if (err->service_response ==
+ HBA_RESP_SVCRES_TMF_LUN_INVALID) {
+ scsicmd->result =
+ DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
+ } else if ((err->service_response ==
+ HBA_RESP_SVCRES_TMF_COMPLETE) ||
+ (err->service_response ==
+ HBA_RESP_SVCRES_TMF_SUCCEEDED)) {
+ scsicmd->result =
+ DID_OK << 16 | COMMAND_COMPLETE << 8;
+ } else {
+ scsicmd->result =
+ DID_ERROR << 16 | COMMAND_COMPLETE << 8;
+ }
+ }
+
+ aac_fib_complete(fibptr);
+
+ if (fibptr->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF)
+ scsicmd->SCp.sent_command = 1;
+ else
+ scsicmd->scsi_done(scsicmd);
+}
+
+/**
+ *
+ * aac_send_srb_fib
* @scsicmd: the scsi command block
*
* This routine will form a FIB and fill in the aac_srb from the
@@ -3408,6 +3649,54 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
return -1;
}
+/**
+ *
+ * aac_send_hba_fib
+ * @scsicmd: the scsi command block
+ *
+ * This routine will form a FIB and fill in the aac_hba_cmd_req from the
+ * scsicmd passed in.
+ */
+static int aac_send_hba_fib(struct scsi_cmnd *scsicmd)
+{
+ struct fib *cmd_fibcontext;
+ struct aac_dev *dev;
+ int status;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
+ scsicmd->device->lun > AAC_MAX_LUN - 1) {
+ scsicmd->result = DID_NO_CONNECT << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+
+ /*
+ * Allocate and initialize a Fib then setup a BlockWrite command
+ */
+ cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+ if (!cmd_fibcontext)
+ return -1;
+
+ status = aac_adapter_hba(cmd_fibcontext, scsicmd);
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS) {
+ scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+ return 0;
+ }
+
+ pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n",
+ status);
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
+
+ return -1;
+}
+
+
static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *psg)
{
struct aac_dev *dev;
@@ -3660,6 +3949,73 @@ static int aac_convert_sgraw2(struct aac_raw_io2 *rio2, int pages, int nseg, int
return 0;
}
+static long aac_build_sghba(struct scsi_cmnd *scsicmd,
+ struct aac_hba_cmd_req *hbacmd,
+ int sg_max,
+ u64 sg_address)
+{
+ unsigned long byte_count = 0;
+ int nseg;
+
+ nseg = scsi_dma_map(scsicmd);
+ if (nseg < 0)
+ return nseg;
+ if (nseg) {
+ struct scatterlist *sg;
+ int i;
+ u32 cur_size;
+ struct aac_hba_sgl *sge;
+
+ if (nseg > HBA_MAX_SG_EMBEDDED)
+ sge = &hbacmd->sge[2];
+ else
+ sge = &hbacmd->sge[0];
+
+ scsi_for_each_sg(scsicmd, sg, nseg, i) {
+ int count = sg_dma_len(sg);
+ u64 addr = sg_dma_address(sg);
+
+ WARN_ON(i >= sg_max);
+ sge->addr_hi = cpu_to_le32((u32)(addr>>32));
+ sge->addr_lo = cpu_to_le32((u32)(addr & 0xffffffff));
+ cur_size = cpu_to_le32(count);
+ sge->len = cur_size;
+ sge->flags = 0;
+ byte_count += count;
+ sge++;
+ }
+
+ sge--;
+ /* hba wants the size to be exact */
+ if (byte_count > scsi_bufflen(scsicmd)) {
+ u32 temp = le32_to_cpu(sge->len) -
+ (byte_count - scsi_bufflen(scsicmd));
+ sge->len = cpu_to_le32(temp);
+ byte_count = scsi_bufflen(scsicmd);
+ }
+
+ if (nseg <= HBA_MAX_SG_EMBEDDED) {
+ hbacmd->emb_data_desc_count = cpu_to_le32(nseg);
+ sge->flags = cpu_to_le32(0x40000000);
+ } else {
+ /* not embedded */
+ hbacmd->sge[0].flags = cpu_to_le32(0x80000000);
+ hbacmd->emb_data_desc_count = (u8)cpu_to_le32(1);
+ hbacmd->sge[0].addr_hi =
+ (u32)cpu_to_le32(sg_address >> 32);
+ hbacmd->sge[0].addr_lo =
+ cpu_to_le32((u32)(sg_address & 0xffffffff));
+ }
+
+ /* Check for command underflow */
+ if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
+ pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
+ }
+ }
+ return byte_count;
+}
+
#ifdef AAC_DETAILED_STATUS_INFO
struct aac_srb_status_info {
--
2.7.4
next prev parent reply other threads:[~2017-01-26 0:38 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-25 18:00 [PATCH V2 00/24] aacraid: Patchset for Smart Family support Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 01/24] aacraid: Remove duplicate irq management code Raghava Aditya Renukunta
2017-01-26 8:26 ` Johannes Thumshirn
2017-01-25 18:00 ` [PATCH V2 02/24] aacraid: Added aacraid.h include guard Raghava Aditya Renukunta
2017-01-26 8:27 ` Johannes Thumshirn
2017-01-25 18:00 ` [PATCH V2 03/24] aacraid: added support for init_struct_8 Raghava Aditya Renukunta
2017-01-26 8:37 ` Johannes Thumshirn
2017-01-26 18:42 ` Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 04/24] aacraid: Added sa firmware support Raghava Aditya Renukunta
2017-01-26 8:55 ` Johannes Thumshirn
2017-01-26 18:43 ` Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 05/24] aacraid: Retrieve and update the device types Raghava Aditya Renukunta
2017-01-26 8:59 ` Johannes Thumshirn
2017-01-26 18:44 ` Raghava Aditya Renukunta
2017-01-26 21:00 ` Raghava Aditya Renukunta
2017-01-27 8:08 ` Johannes Thumshirn
2017-01-27 18:24 ` Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 06/24] aacraid: Reworked scsi command submission path Raghava Aditya Renukunta
2017-01-26 9:05 ` Johannes Thumshirn
2017-01-26 18:52 ` Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 07/24] aacraid: Process Error for response I/O Raghava Aditya Renukunta
2017-01-26 9:06 ` Johannes Thumshirn
2017-01-25 18:00 ` [PATCH V2 08/24] aacraid: Added support for response path Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 09/24] aacraid: Added support for read medium error Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 10/24] aacraid: Reworked aac_command_thread Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 11/24] aacraid: Added support for periodic wellness sync Raghava Aditya Renukunta
2017-01-25 18:00 ` [PATCH V2 12/24] aacraid: Retrieve Queue Depth from Adapter FW Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 13/24] aacraid: Added support to set QD of attached drives Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 14/24] aacraid: Added support for hotplug Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 15/24] aacraid: Include HBA direct interface Raghava Aditya Renukunta
2017-01-25 18:01 ` Raghava Aditya Renukunta [this message]
2017-01-25 18:01 ` [PATCH V2 17/24] aacraid: Added support to abort cmd and reset lun Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 18/24] aacraid: VPD 83 type3 support Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 19/24] aacraid: Added new IWBR reset Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 20/24] aacraid: Added ioctl to trigger IOP/IWBR reset Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 21/24] aacraid: Retrieve HBA host information ioctl Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 22/24] aacraid: Update copyrights Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 23/24] aacraid: Change Driver Version Prefix Raghava Aditya Renukunta
2017-01-25 18:01 ` [PATCH V2 24/24] aacraid: update version Raghava Aditya Renukunta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170125180111.25401-17-RaghavaAditya.Renukunta@microsemi.com \
--to=raghavaaditya.renukunta@microsemi.com \
--cc=David.Carroll@microsemi.com \
--cc=Gana.Sridaran@microsemi.com \
--cc=Scott.Benesh@microsemi.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.