From: Minchan Kim <minchan@kernel.org>
To: Vinayak Menon <vinmenon@codeaurora.org>
Cc: akpm@linux-foundation.org, hannes@cmpxchg.org,
mgorman@techsingularity.net, vbabka@suse.cz, mhocko@suse.com,
riel@redhat.com, vdavydov.dev@gmail.com,
anton.vorontsov@linaro.org, shiraz.hashim@gmail.com,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mm: vmscan: do not pass reclaimed slab to vmpressure
Date: Thu, 26 Jan 2017 08:27:13 +0900 [thread overview]
Message-ID: <20170125232713.GB20811@bbox> (raw)
In-Reply-To: <1485344318-6418-1-git-send-email-vinmenon@codeaurora.org>
Hello Vinayak,
On Wed, Jan 25, 2017 at 05:08:38PM +0530, Vinayak Menon wrote:
> It is noticed that during a global reclaim the memory
> reclaimed via shrinking the slabs can sometimes result
> in reclaimed pages being greater than the scanned pages
> in shrink_node. When this is passed to vmpressure, the
I don't know you are saying zsmalloc. Anyway, it's one of those which
free larger pages than requested. I should fix that but was not sent
yet, unfortunately.
> unsigned arithmetic results in the pressure value to be
> huge, thus resulting in a critical event being sent to
> root cgroup. Fix this by not passing the reclaimed slab
> count to vmpressure, with the assumption that vmpressure
> should show the actual pressure on LRU which is now
> diluted by adding reclaimed slab without a corresponding
> scanned value.
I can't guess justfication of your assumption from the description.
Why do we consider only LRU pages for vmpressure? Could you elaborate
a bit?
Thanks.
>
> Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
> ---
> mm/vmscan.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 947ab6f..37c4486 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -2594,16 +2594,16 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
> sc->nr_scanned - nr_scanned,
> node_lru_pages);
>
> - if (reclaim_state) {
> - sc->nr_reclaimed += reclaim_state->reclaimed_slab;
> - reclaim_state->reclaimed_slab = 0;
> - }
> -
> /* Record the subtree's reclaim efficiency */
> vmpressure(sc->gfp_mask, sc->target_mem_cgroup, true,
> sc->nr_scanned - nr_scanned,
> sc->nr_reclaimed - nr_reclaimed);
>
> + if (reclaim_state) {
> + sc->nr_reclaimed += reclaim_state->reclaimed_slab;
> + reclaim_state->reclaimed_slab = 0;
> + }
> +
> if (sc->nr_reclaimed - nr_reclaimed)
> reclaimable = true;
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
> member of the Code Aurora Forum, hosted by The Linux Foundation
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Minchan Kim <minchan@kernel.org>
To: Vinayak Menon <vinmenon@codeaurora.org>
Cc: akpm@linux-foundation.org, hannes@cmpxchg.org,
mgorman@techsingularity.net, vbabka@suse.cz, mhocko@suse.com,
riel@redhat.com, vdavydov.dev@gmail.com,
anton.vorontsov@linaro.org, shiraz.hashim@gmail.com,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mm: vmscan: do not pass reclaimed slab to vmpressure
Date: Thu, 26 Jan 2017 08:27:13 +0900 [thread overview]
Message-ID: <20170125232713.GB20811@bbox> (raw)
In-Reply-To: <1485344318-6418-1-git-send-email-vinmenon@codeaurora.org>
Hello Vinayak,
On Wed, Jan 25, 2017 at 05:08:38PM +0530, Vinayak Menon wrote:
> It is noticed that during a global reclaim the memory
> reclaimed via shrinking the slabs can sometimes result
> in reclaimed pages being greater than the scanned pages
> in shrink_node. When this is passed to vmpressure, the
I don't know you are saying zsmalloc. Anyway, it's one of those which
free larger pages than requested. I should fix that but was not sent
yet, unfortunately.
> unsigned arithmetic results in the pressure value to be
> huge, thus resulting in a critical event being sent to
> root cgroup. Fix this by not passing the reclaimed slab
> count to vmpressure, with the assumption that vmpressure
> should show the actual pressure on LRU which is now
> diluted by adding reclaimed slab without a corresponding
> scanned value.
I can't guess justfication of your assumption from the description.
Why do we consider only LRU pages for vmpressure? Could you elaborate
a bit?
Thanks.
>
> Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
> ---
> mm/vmscan.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 947ab6f..37c4486 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -2594,16 +2594,16 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
> sc->nr_scanned - nr_scanned,
> node_lru_pages);
>
> - if (reclaim_state) {
> - sc->nr_reclaimed += reclaim_state->reclaimed_slab;
> - reclaim_state->reclaimed_slab = 0;
> - }
> -
> /* Record the subtree's reclaim efficiency */
> vmpressure(sc->gfp_mask, sc->target_mem_cgroup, true,
> sc->nr_scanned - nr_scanned,
> sc->nr_reclaimed - nr_reclaimed);
>
> + if (reclaim_state) {
> + sc->nr_reclaimed += reclaim_state->reclaimed_slab;
> + reclaim_state->reclaimed_slab = 0;
> + }
> +
> if (sc->nr_reclaimed - nr_reclaimed)
> reclaimable = true;
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
> member of the Code Aurora Forum, hosted by The Linux Foundation
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-01-25 23:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-25 11:38 [PATCH] mm: vmscan: do not pass reclaimed slab to vmpressure Vinayak Menon
2017-01-25 11:38 ` Vinayak Menon
2017-01-25 23:27 ` Minchan Kim [this message]
2017-01-25 23:27 ` Minchan Kim
2017-01-26 5:23 ` vinayak menon
2017-01-26 5:23 ` vinayak menon
2017-01-26 14:18 ` Minchan Kim
2017-01-26 14:18 ` Minchan Kim
2017-01-27 8:13 ` vinayak menon
2017-01-27 8:13 ` vinayak menon
2017-01-30 23:40 ` Minchan Kim
2017-01-30 23:40 ` Minchan Kim
2017-06-06 13:00 ` zhong jiang
2017-06-06 13:00 ` zhong jiang
2017-06-07 2:53 ` Minchan Kim
2017-06-07 2:53 ` Minchan Kim
2017-06-07 3:07 ` zhong jiang
2017-06-07 3:07 ` zhong jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170125232713.GB20811@bbox \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=anton.vorontsov@linaro.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=mhocko@suse.com \
--cc=riel@redhat.com \
--cc=shiraz.hashim@gmail.com \
--cc=vbabka@suse.cz \
--cc=vdavydov.dev@gmail.com \
--cc=vinmenon@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.