From: mathieu.poirier@linaro.org (Mathieu Poirier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] coresight: refactor with function of_coresight_get_cpu
Date: Wed, 1 Mar 2017 09:02:33 -0700 [thread overview]
Message-ID: <20170301160233.GB4009@linaro.org> (raw)
In-Reply-To: <1488294420-14188-3-git-send-email-leo.yan@linaro.org>
On Tue, Feb 28, 2017 at 11:06:59PM +0800, Leo Yan wrote:
> This is refactor to add function of_coresight_get_cpu(), so it's used to
> retrieve CPU id for coresight component. Finally can use it as a common
> function for multiple places.
>
> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
> drivers/hwtracing/coresight/of_coresight.c | 35 ++++++++++++++++++++----------
> include/linux/coresight.h | 2 ++
> 2 files changed, 25 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c
> index 629e031..2e7bbe2 100644
> --- a/drivers/hwtracing/coresight/of_coresight.c
> +++ b/drivers/hwtracing/coresight/of_coresight.c
> @@ -101,14 +101,34 @@ static int of_coresight_alloc_memory(struct device *dev,
> return 0;
> }
>
> +int of_coresight_get_cpu(struct device_node *node)
> +{
> + int cpu;
> + struct device_node *dn;
> +
> + dn = of_parse_phandle(node, "cpu", 0);
> +
> + /* Affinity defaults to CPU0 */
> + if (!dn)
> + return 0;
> +
> + for_each_possible_cpu(cpu) {
> + if (dn == of_get_cpu_node(cpu, NULL))
> + break;
> + }
> + of_node_put(dn);
In the case where no CPU nodes are found this function will return the number
of the last CPU that was probed instead of '0'.
> +
> + return cpu;
> +}
> +EXPORT_SYMBOL_GPL(of_coresight_get_cpu);
Any reason you exported this - the fact that is it declared in corsight.h should
be enough.
Thanks,
Mathieu
> +
> struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node)
> {
> - int i = 0, ret = 0, cpu;
> + int i = 0, ret = 0;
> struct coresight_platform_data *pdata;
> struct of_endpoint endpoint, rendpoint;
> struct device *rdev;
> - struct device_node *dn;
> struct device_node *ep = NULL;
> struct device_node *rparent = NULL;
> struct device_node *rport = NULL;
> @@ -175,16 +195,7 @@ struct coresight_platform_data *of_get_coresight_platform_data(
> } while (ep);
> }
>
> - /* Affinity defaults to CPU0 */
> - pdata->cpu = 0;
> - dn = of_parse_phandle(node, "cpu", 0);
> - for (cpu = 0; dn && cpu < nr_cpu_ids; cpu++) {
> - if (dn == of_get_cpu_node(cpu, NULL)) {
> - pdata->cpu = cpu;
> - break;
> - }
> - }
> - of_node_put(dn);
> + pdata->cpu = of_coresight_get_cpu(node);
>
> return pdata;
> }
> diff --git a/include/linux/coresight.h b/include/linux/coresight.h
> index 2a5982c..6709561 100644
> --- a/include/linux/coresight.h
> +++ b/include/linux/coresight.h
> @@ -263,11 +263,13 @@ static inline int coresight_timeout(void __iomem *addr, u32 offset,
> #endif
>
> #ifdef CONFIG_OF
> +extern int of_coresight_get_cpu(struct device_node *node);
> extern struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node);
> #else
> static inline struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node) { return NULL; }
> +static int of_coresight_get_cpu(struct device_node *node) { return 0; }
> #endif
>
> #ifdef CONFIG_PID_NS
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, mike.leach@linaro.org
Subject: Re: [PATCH v2 2/3] coresight: refactor with function of_coresight_get_cpu
Date: Wed, 1 Mar 2017 09:02:33 -0700 [thread overview]
Message-ID: <20170301160233.GB4009@linaro.org> (raw)
In-Reply-To: <1488294420-14188-3-git-send-email-leo.yan@linaro.org>
On Tue, Feb 28, 2017 at 11:06:59PM +0800, Leo Yan wrote:
> This is refactor to add function of_coresight_get_cpu(), so it's used to
> retrieve CPU id for coresight component. Finally can use it as a common
> function for multiple places.
>
> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
> drivers/hwtracing/coresight/of_coresight.c | 35 ++++++++++++++++++++----------
> include/linux/coresight.h | 2 ++
> 2 files changed, 25 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c
> index 629e031..2e7bbe2 100644
> --- a/drivers/hwtracing/coresight/of_coresight.c
> +++ b/drivers/hwtracing/coresight/of_coresight.c
> @@ -101,14 +101,34 @@ static int of_coresight_alloc_memory(struct device *dev,
> return 0;
> }
>
> +int of_coresight_get_cpu(struct device_node *node)
> +{
> + int cpu;
> + struct device_node *dn;
> +
> + dn = of_parse_phandle(node, "cpu", 0);
> +
> + /* Affinity defaults to CPU0 */
> + if (!dn)
> + return 0;
> +
> + for_each_possible_cpu(cpu) {
> + if (dn == of_get_cpu_node(cpu, NULL))
> + break;
> + }
> + of_node_put(dn);
In the case where no CPU nodes are found this function will return the number
of the last CPU that was probed instead of '0'.
> +
> + return cpu;
> +}
> +EXPORT_SYMBOL_GPL(of_coresight_get_cpu);
Any reason you exported this - the fact that is it declared in corsight.h should
be enough.
Thanks,
Mathieu
> +
> struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node)
> {
> - int i = 0, ret = 0, cpu;
> + int i = 0, ret = 0;
> struct coresight_platform_data *pdata;
> struct of_endpoint endpoint, rendpoint;
> struct device *rdev;
> - struct device_node *dn;
> struct device_node *ep = NULL;
> struct device_node *rparent = NULL;
> struct device_node *rport = NULL;
> @@ -175,16 +195,7 @@ struct coresight_platform_data *of_get_coresight_platform_data(
> } while (ep);
> }
>
> - /* Affinity defaults to CPU0 */
> - pdata->cpu = 0;
> - dn = of_parse_phandle(node, "cpu", 0);
> - for (cpu = 0; dn && cpu < nr_cpu_ids; cpu++) {
> - if (dn == of_get_cpu_node(cpu, NULL)) {
> - pdata->cpu = cpu;
> - break;
> - }
> - }
> - of_node_put(dn);
> + pdata->cpu = of_coresight_get_cpu(node);
>
> return pdata;
> }
> diff --git a/include/linux/coresight.h b/include/linux/coresight.h
> index 2a5982c..6709561 100644
> --- a/include/linux/coresight.h
> +++ b/include/linux/coresight.h
> @@ -263,11 +263,13 @@ static inline int coresight_timeout(void __iomem *addr, u32 offset,
> #endif
>
> #ifdef CONFIG_OF
> +extern int of_coresight_get_cpu(struct device_node *node);
> extern struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node);
> #else
> static inline struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node) { return NULL; }
> +static int of_coresight_get_cpu(struct device_node *node) { return 0; }
> #endif
>
> #ifdef CONFIG_PID_NS
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Leo Yan <leo.yan@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, mike.leach@linaro.org
Subject: Re: [PATCH v2 2/3] coresight: refactor with function of_coresight_get_cpu
Date: Wed, 1 Mar 2017 09:02:33 -0700 [thread overview]
Message-ID: <20170301160233.GB4009@linaro.org> (raw)
In-Reply-To: <1488294420-14188-3-git-send-email-leo.yan@linaro.org>
On Tue, Feb 28, 2017 at 11:06:59PM +0800, Leo Yan wrote:
> This is refactor to add function of_coresight_get_cpu(), so it's used to
> retrieve CPU id for coresight component. Finally can use it as a common
> function for multiple places.
>
> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
> drivers/hwtracing/coresight/of_coresight.c | 35 ++++++++++++++++++++----------
> include/linux/coresight.h | 2 ++
> 2 files changed, 25 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c
> index 629e031..2e7bbe2 100644
> --- a/drivers/hwtracing/coresight/of_coresight.c
> +++ b/drivers/hwtracing/coresight/of_coresight.c
> @@ -101,14 +101,34 @@ static int of_coresight_alloc_memory(struct device *dev,
> return 0;
> }
>
> +int of_coresight_get_cpu(struct device_node *node)
> +{
> + int cpu;
> + struct device_node *dn;
> +
> + dn = of_parse_phandle(node, "cpu", 0);
> +
> + /* Affinity defaults to CPU0 */
> + if (!dn)
> + return 0;
> +
> + for_each_possible_cpu(cpu) {
> + if (dn == of_get_cpu_node(cpu, NULL))
> + break;
> + }
> + of_node_put(dn);
In the case where no CPU nodes are found this function will return the number
of the last CPU that was probed instead of '0'.
> +
> + return cpu;
> +}
> +EXPORT_SYMBOL_GPL(of_coresight_get_cpu);
Any reason you exported this - the fact that is it declared in corsight.h should
be enough.
Thanks,
Mathieu
> +
> struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node)
> {
> - int i = 0, ret = 0, cpu;
> + int i = 0, ret = 0;
> struct coresight_platform_data *pdata;
> struct of_endpoint endpoint, rendpoint;
> struct device *rdev;
> - struct device_node *dn;
> struct device_node *ep = NULL;
> struct device_node *rparent = NULL;
> struct device_node *rport = NULL;
> @@ -175,16 +195,7 @@ struct coresight_platform_data *of_get_coresight_platform_data(
> } while (ep);
> }
>
> - /* Affinity defaults to CPU0 */
> - pdata->cpu = 0;
> - dn = of_parse_phandle(node, "cpu", 0);
> - for (cpu = 0; dn && cpu < nr_cpu_ids; cpu++) {
> - if (dn == of_get_cpu_node(cpu, NULL)) {
> - pdata->cpu = cpu;
> - break;
> - }
> - }
> - of_node_put(dn);
> + pdata->cpu = of_coresight_get_cpu(node);
>
> return pdata;
> }
> diff --git a/include/linux/coresight.h b/include/linux/coresight.h
> index 2a5982c..6709561 100644
> --- a/include/linux/coresight.h
> +++ b/include/linux/coresight.h
> @@ -263,11 +263,13 @@ static inline int coresight_timeout(void __iomem *addr, u32 offset,
> #endif
>
> #ifdef CONFIG_OF
> +extern int of_coresight_get_cpu(struct device_node *node);
> extern struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node);
> #else
> static inline struct coresight_platform_data *of_get_coresight_platform_data(
> struct device *dev, struct device_node *node) { return NULL; }
> +static int of_coresight_get_cpu(struct device_node *node) { return 0; }
> #endif
>
> #ifdef CONFIG_PID_NS
> --
> 2.7.4
>
next prev parent reply other threads:[~2017-03-01 16:02 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-28 15:06 [PATCH v2 0/3] coresight: enable debug module Leo Yan
2017-02-28 15:06 ` Leo Yan
2017-02-28 15:06 ` [PATCH v2 1/3] coresight: bindings for " Leo Yan
2017-02-28 15:06 ` Leo Yan
2017-03-01 15:45 ` Mathieu Poirier
2017-03-01 15:45 ` Mathieu Poirier
2017-03-01 15:45 ` Mathieu Poirier
2017-03-02 0:43 ` Leo Yan
2017-03-02 0:43 ` Leo Yan
2017-03-02 0:43 ` Leo Yan
2017-03-03 6:21 ` Rob Herring
2017-03-03 6:21 ` Rob Herring
2017-03-03 6:21 ` Rob Herring
2017-02-28 15:06 ` [PATCH v2 2/3] coresight: refactor with function of_coresight_get_cpu Leo Yan
2017-02-28 15:06 ` Leo Yan
2017-02-28 15:06 ` Leo Yan
2017-03-01 16:02 ` Mathieu Poirier [this message]
2017-03-01 16:02 ` Mathieu Poirier
2017-03-01 16:02 ` Mathieu Poirier
2017-03-02 0:39 ` Leo Yan
2017-03-02 0:39 ` Leo Yan
2017-03-02 0:39 ` Leo Yan
2017-02-28 15:07 ` [PATCH v2 3/3] coresight: add support for debug module Leo Yan
2017-02-28 15:07 ` Leo Yan
2017-03-01 17:35 ` Mathieu Poirier
2017-03-01 17:35 ` Mathieu Poirier
2017-03-01 17:35 ` Mathieu Poirier
2017-03-02 0:37 ` Leo Yan
2017-03-02 0:37 ` Leo Yan
2017-03-02 0:37 ` Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170301160233.GB4009@linaro.org \
--to=mathieu.poirier@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.