* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-08 6:41 ` Rafał Miłecki 0 siblings, 0 replies; 18+ messages in thread From: Rafał Miłecki @ 2017-03-08 6:41 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list, devicetree, linux-arm-kernel, linux-leds, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> Such a trigger doesn't exist in Linux and is not needed as LED is being turned off by default. This could cause errors in LEDs core code when trying to set default trigger. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 6bdd79567cbd..34417dac1cd0 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -26,19 +26,16 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; system { @@ -54,7 +51,6 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-08 6:41 ` Rafał Miłecki 0 siblings, 0 replies; 18+ messages in thread From: Rafał Miłecki @ 2017-03-08 6:41 UTC (permalink / raw) To: linux-arm-kernel From: Rafa? Mi?ecki <rafal@milecki.pl> Such a trigger doesn't exist in Linux and is not needed as LED is being turned off by default. This could cause errors in LEDs core code when trying to set default trigger. Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> --- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 6bdd79567cbd..34417dac1cd0 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -26,19 +26,16 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; system { @@ -54,7 +51,6 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger 2017-03-08 6:41 ` Rafał Miłecki @ 2017-03-08 6:41 ` Rafał Miłecki -1 siblings, 0 replies; 18+ messages in thread From: Rafał Miłecki @ 2017-03-08 6:41 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list, devicetree, linux-arm-kernel, linux-leds, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> Such a trigger doesn't exist in Linux and is not needed as LED is being turned off by default. This could cause errors in LEDs core code when trying to set default trigger. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 ----- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 -- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 ----- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 --- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 --- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ---------- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 -- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ---- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 -- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 -------- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 ------- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 --------- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 -------- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 -------- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------ 16 files changed, 88 deletions(-) diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 3bf8db4d103f..4175174e589a 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -41,19 +41,16 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -71,14 +68,12 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 33b0ae6290cb..8fa033fea959 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -41,7 +41,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -59,7 +58,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index c9ba6b964b38..62e1427b3f10 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -52,13 +52,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power1 { @@ -76,7 +74,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -88,13 +85,11 @@ wireless0 { label = "bcm53xx:blue:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index b9f66c0fae27..a5647efe4118 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -43,19 +43,16 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 5dae6a7ee134..bb66cebe0bd8 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -47,7 +47,6 @@ power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power1 { @@ -59,13 +58,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 36b628b190d7..19ee924d7d53 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -37,61 +37,51 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-red { label = "bcm53xx:red:status"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-green { label = "bcm53xx:green:status"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-blue { label = "bcm53xx:blue:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-red { label = "bcm53xx:red:wan"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 7a95c67d3962..0800a964f2fe 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -47,7 +47,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { @@ -65,7 +64,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index a6d15cce0545..c2af33eb47de 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -68,7 +68,6 @@ power1 { label = "bcm53xx:red:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router0 { @@ -80,7 +79,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -92,13 +90,11 @@ wireless0 { label = "bcm53xx:green:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 70421f916f15..df473cc41572 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -41,7 +41,6 @@ wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -53,7 +52,6 @@ wan { label = "bcm53xx:red:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index b32957ca9443..92058c73ee59 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -31,13 +31,11 @@ usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-white { @@ -49,37 +47,31 @@ router-amber { label = "bcm53xx:amber:router"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router-white { label = "bcm53xx:white:router"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-amber { label = "bcm53xx:amber:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-white { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 84b3f36b0b25..f43ab4721456 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -47,43 +47,36 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 5581c6fc23d5..d266131652ad 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -47,7 +47,6 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan-white { @@ -59,49 +58,41 @@ wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index c67bfaa0c8e8..97aa5d59a1d8 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -26,49 +26,41 @@ lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-blue { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 5263b3368f1f..51b0641b5f79 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -56,37 +56,31 @@ wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 5cf4ab1ebe85..5f8621d00c50 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -34,37 +34,31 @@ lan3 { label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan4 { label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:green:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan1 { label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan2 { label = "bcm53xx:green:lan2"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; status { @@ -76,13 +70,11 @@ 2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 600795ee1aed..859929973158 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -34,37 +34,31 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger @ 2017-03-08 6:41 ` Rafał Miłecki 0 siblings, 0 replies; 18+ messages in thread From: Rafał Miłecki @ 2017-03-08 6:41 UTC (permalink / raw) To: linux-arm-kernel From: Rafa? Mi?ecki <rafal@milecki.pl> Such a trigger doesn't exist in Linux and is not needed as LED is being turned off by default. This could cause errors in LEDs core code when trying to set default trigger. Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> --- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 ----- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 -- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 ----- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 --- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 --- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ---------- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 -- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ---- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 -- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 -------- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 ------- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 --------- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 -------- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 -------- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------ 16 files changed, 88 deletions(-) diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 3bf8db4d103f..4175174e589a 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -41,19 +41,16 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -71,14 +68,12 @@ 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 33b0ae6290cb..8fa033fea959 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -41,7 +41,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -59,7 +58,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index c9ba6b964b38..62e1427b3f10 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -52,13 +52,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power1 { @@ -76,7 +74,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -88,13 +85,11 @@ wireless0 { label = "bcm53xx:blue:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index b9f66c0fae27..a5647efe4118 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -43,19 +43,16 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 5dae6a7ee134..bb66cebe0bd8 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -47,7 +47,6 @@ power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power1 { @@ -59,13 +58,11 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:blue:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 36b628b190d7..19ee924d7d53 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -37,61 +37,51 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-red { label = "bcm53xx:red:status"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-green { label = "bcm53xx:green:status"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; status-blue { label = "bcm53xx:blue:status"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-red { label = "bcm53xx:red:wan"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 7a95c67d3962..0800a964f2fe 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -47,7 +47,6 @@ usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { @@ -65,7 +64,6 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index a6d15cce0545..c2af33eb47de 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -68,7 +68,6 @@ power1 { label = "bcm53xx:red:power"; gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router0 { @@ -80,7 +79,6 @@ router1 { label = "bcm53xx:amber:router"; gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan { @@ -92,13 +90,11 @@ wireless0 { label = "bcm53xx:green:wireless"; gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless1 { label = "bcm53xx:amber:wireless"; gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 70421f916f15..df473cc41572 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -41,7 +41,6 @@ wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power { @@ -53,7 +52,6 @@ wan { label = "bcm53xx:red:wan"; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index b32957ca9443..92058c73ee59 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -31,13 +31,11 @@ usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power-white { @@ -49,37 +47,31 @@ router-amber { label = "bcm53xx:amber:router"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; router-white { label = "bcm53xx:white:router"; gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-amber { label = "bcm53xx:amber:wireless"; gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless-white { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 84b3f36b0b25..f43ab4721456 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -47,43 +47,36 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 5581c6fc23d5..d266131652ad 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -47,7 +47,6 @@ power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan-white { @@ -59,49 +58,41 @@ wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wireless { label = "bcm53xx:white:wireless"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:white:wps"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index c67bfaa0c8e8..97aa5d59a1d8 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -26,49 +26,41 @@ lan { label = "bcm53xx:blue:lan"; gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wps { label = "bcm53xx:blue:wps"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:blue:2ghz"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:blue:5ghz"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-blue { label = "bcm53xx:blue:wan"; gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; }; power { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 5263b3368f1f..51b0641b5f79 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -56,37 +56,31 @@ wan-white { label = "bcm53xx:white:wan"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; power-amber { label = "bcm53xx:amber:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan-amber { label = "bcm53xx:amber:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:white:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 5cf4ab1ebe85..5f8621d00c50 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -34,37 +34,31 @@ lan3 { label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan4 { label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; wan { label = "bcm53xx:green:wan"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan1 { label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; lan2 { label = "bcm53xx:green:lan2"; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; status { @@ -76,13 +70,11 @@ 2ghz { label = "bcm53xx:green:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz { label = "bcm53xx:green:5ghz"; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 600795ee1aed..859929973158 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -34,37 +34,31 @@ power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-1 { label = "bcm53xx:white:5ghz-1"; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 5ghz-2 { label = "bcm53xx:white:5ghz-2"; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; 2ghz { label = "bcm53xx:white:2ghz"; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; usb3 { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; }; }; -- 2.11.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger 2017-03-08 6:41 ` Rafał Miłecki @ 2017-03-09 20:33 ` Florian Fainelli -1 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-09 20:33 UTC (permalink / raw) To: Rafał Miłecki, Florian Fainelli Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list, devicetree, linux-arm-kernel, linux-leds, Rafał Miłecki On 03/07/2017 10:41 PM, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Applied, thanks! -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger @ 2017-03-09 20:33 ` Florian Fainelli 0 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-09 20:33 UTC (permalink / raw) To: linux-arm-kernel On 03/07/2017 10:41 PM, Rafa? Mi?ecki wrote: > From: Rafa? Mi?ecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> Applied, thanks! -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 2017-03-08 6:41 ` Rafał Miłecki @ 2017-03-08 10:20 ` Pavel Machek -1 siblings, 0 replies; 18+ messages in thread From: Pavel Machek @ 2017-03-08 10:20 UTC (permalink / raw) To: Rafał Miłecki Cc: Mark Rutland, devicetree, Florian Fainelli, Hauke Mehrtens, Russell King, Rob Herring, bcm-kernel-feedback-list, linux-leds, Rafał Miłecki, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 542 bytes --] On Wed 2017-03-08 07:41:04, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> For both patches: Acked-by: Pavel Machek <pavel@ucw.cz> -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #1.2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-08 10:20 ` Pavel Machek 0 siblings, 0 replies; 18+ messages in thread From: Pavel Machek @ 2017-03-08 10:20 UTC (permalink / raw) To: linux-arm-kernel On Wed 2017-03-08 07:41:04, Rafa? Mi?ecki wrote: > From: Rafa? Mi?ecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> For both patches: Acked-by: Pavel Machek <pavel@ucw.cz> -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170308/1bd05842/attachment.sig> ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 2017-03-08 6:41 ` Rafał Miłecki @ 2017-03-08 17:31 ` Florian Fainelli -1 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-08 17:31 UTC (permalink / raw) To: Rafał Miłecki, Florian Fainelli Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list, devicetree, linux-arm-kernel, linux-leds, Rafał Miłecki On 03/07/2017 10:41 PM, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Since you are fixing something, what's the proper Fixes: tag for this commit? Likewise for the second patch. Thanks > --- > arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts > index 6bdd79567cbd..34417dac1cd0 100644 > --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts > +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts > @@ -26,19 +26,16 @@ > usb { > label = "bcm53xx:blue:usb"; > gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > > wps { > label = "bcm53xx:blue:wps"; > gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > > 5ghz { > label = "bcm53xx:blue:5ghz"; > gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > > system { > @@ -54,7 +51,6 @@ > 2ghz { > label = "bcm53xx:blue:2ghz"; > gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > }; > > -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-08 17:31 ` Florian Fainelli 0 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-08 17:31 UTC (permalink / raw) To: linux-arm-kernel On 03/07/2017 10:41 PM, Rafa? Mi?ecki wrote: > From: Rafa? Mi?ecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> Since you are fixing something, what's the proper Fixes: tag for this commit? Likewise for the second patch. Thanks > --- > arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts > index 6bdd79567cbd..34417dac1cd0 100644 > --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts > +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts > @@ -26,19 +26,16 @@ > usb { > label = "bcm53xx:blue:usb"; > gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > > wps { > label = "bcm53xx:blue:wps"; > gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > > 5ghz { > label = "bcm53xx:blue:5ghz"; > gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > > system { > @@ -54,7 +51,6 @@ > 2ghz { > label = "bcm53xx:blue:2ghz"; > gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; > - linux,default-trigger = "default-off"; > }; > }; > > -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 2017-03-08 17:31 ` Florian Fainelli @ 2017-03-08 22:20 ` Rafał Miłecki -1 siblings, 0 replies; 18+ messages in thread From: Rafał Miłecki @ 2017-03-08 22:20 UTC (permalink / raw) To: Florian Fainelli Cc: Mark Rutland, devicetree@vger.kernel.org, Hauke Mehrtens, Russell King, Rob Herring, bcm-kernel-feedback-list, open list:LED SUBSYSTEM, Rafał Miłecki, linux-arm-kernel@lists.infradead.org On 8 March 2017 at 18:31, Florian Fainelli <f.fainelli@gmail.com> wrote: > On 03/07/2017 10:41 PM, Rafał Miłecki wrote: >> From: Rafał Miłecki <rafal@milecki.pl> >> >> Such a trigger doesn't exist in Linux and is not needed as LED is being >> turned off by default. This could cause errors in LEDs core code when >> trying to set default trigger. >> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > > Since you are fixing something, what's the proper Fixes: tag for this > commit? Likewise for the second patch. This problem was exposed by the commit f363a870eaef ("leds: core: use deferred probing if default trigger isn't available yet") pushed to the: https://git.kernel.org/cgit/linux/kernel/git/j.anaszewski/linux-leds.git/log/?h=for-next I reported problems caused by this commit in e-mail thread New problems after f363a870eaef ("leds: core: use deferred probing if default trigger isn't available yet") (I can't access linux-leds archive) and it was dropped after my report. So there is nothing to point in the "Fixes:". -- Rafał _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-08 22:20 ` Rafał Miłecki 0 siblings, 0 replies; 18+ messages in thread From: Rafał Miłecki @ 2017-03-08 22:20 UTC (permalink / raw) To: linux-arm-kernel On 8 March 2017 at 18:31, Florian Fainelli <f.fainelli@gmail.com> wrote: > On 03/07/2017 10:41 PM, Rafa? Mi?ecki wrote: >> From: Rafa? Mi?ecki <rafal@milecki.pl> >> >> Such a trigger doesn't exist in Linux and is not needed as LED is being >> turned off by default. This could cause errors in LEDs core code when >> trying to set default trigger. >> >> Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> > > Since you are fixing something, what's the proper Fixes: tag for this > commit? Likewise for the second patch. This problem was exposed by the commit f363a870eaef ("leds: core: use deferred probing if default trigger isn't available yet") pushed to the: https://git.kernel.org/cgit/linux/kernel/git/j.anaszewski/linux-leds.git/log/?h=for-next I reported problems caused by this commit in e-mail thread New problems after f363a870eaef ("leds: core: use deferred probing if default trigger isn't available yet") (I can't access linux-leds archive) and it was dropped after my report. So there is nothing to point in the "Fixes:". -- Rafa? ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 2017-03-08 17:31 ` Florian Fainelli @ 2017-03-10 13:20 ` Pavel Machek -1 siblings, 0 replies; 18+ messages in thread From: Pavel Machek @ 2017-03-10 13:20 UTC (permalink / raw) To: Florian Fainelli Cc: Rafał Miłecki, Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list, devicetree, linux-arm-kernel, linux-leds, Rafał Miłecki [-- Attachment #1: Type: text/plain, Size: 756 bytes --] On Wed 2017-03-08 09:31:44, Florian Fainelli wrote: > On 03/07/2017 10:41 PM, Rafał Miłecki wrote: > > From: Rafał Miłecki <rafal@milecki.pl> > > > > Such a trigger doesn't exist in Linux and is not needed as LED is being > > turned off by default. This could cause errors in LEDs core code when > > trying to set default trigger. > > > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > > Since you are fixing something, what's the proper Fixes: tag for this > commit? Likewise for the second patch. Lets not make submitting patches any harder than it already is. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-10 13:20 ` Pavel Machek 0 siblings, 0 replies; 18+ messages in thread From: Pavel Machek @ 2017-03-10 13:20 UTC (permalink / raw) To: linux-arm-kernel On Wed 2017-03-08 09:31:44, Florian Fainelli wrote: > On 03/07/2017 10:41 PM, Rafa? Mi?ecki wrote: > > From: Rafa? Mi?ecki <rafal@milecki.pl> > > > > Such a trigger doesn't exist in Linux and is not needed as LED is being > > turned off by default. This could cause errors in LEDs core code when > > trying to set default trigger. > > > > Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> > > Since you are fixing something, what's the proper Fixes: tag for this > commit? Likewise for the second patch. Lets not make submitting patches any harder than it already is. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170310/1f2a84bd/attachment.sig> ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 2017-03-10 13:20 ` Pavel Machek @ 2017-03-10 17:44 ` Florian Fainelli -1 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-10 17:44 UTC (permalink / raw) To: Pavel Machek Cc: Rafał Miłecki, Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-leds-u79uwXL29TY76Z2rM5mHXA, Rafał Miłecki On 03/10/2017 05:20 AM, Pavel Machek wrote: > On Wed 2017-03-08 09:31:44, Florian Fainelli wrote: >> On 03/07/2017 10:41 PM, Rafał Miłecki wrote: >>> From: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org> >>> >>> Such a trigger doesn't exist in Linux and is not needed as LED is being >>> turned off by default. This could cause errors in LEDs core code when >>> trying to set default trigger. >>> >>> Signed-off-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org> >> >> Since you are fixing something, what's the proper Fixes: tag for this >> commit? Likewise for the second patch. > > Lets not make submitting patches any harder than it already is. If it was fixing something that was already in Linus' tree, it's important to know so I can queue the patch for the appropriate pull request targeting e.g: v4.11-rcX, this is not needed here as Rafal later indicated. -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-10 17:44 ` Florian Fainelli 0 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-10 17:44 UTC (permalink / raw) To: linux-arm-kernel On 03/10/2017 05:20 AM, Pavel Machek wrote: > On Wed 2017-03-08 09:31:44, Florian Fainelli wrote: >> On 03/07/2017 10:41 PM, Rafa? Mi?ecki wrote: >>> From: Rafa? Mi?ecki <rafal@milecki.pl> >>> >>> Such a trigger doesn't exist in Linux and is not needed as LED is being >>> turned off by default. This could cause errors in LEDs core code when >>> trying to set default trigger. >>> >>> Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> >> >> Since you are fixing something, what's the proper Fixes: tag for this >> commit? Likewise for the second patch. > > Lets not make submitting patches any harder than it already is. If it was fixing something that was already in Linus' tree, it's important to know so I can queue the patch for the appropriate pull request targeting e.g: v4.11-rcX, this is not needed here as Rafal later indicated. -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger 2017-03-08 6:41 ` Rafał Miłecki @ 2017-03-09 20:33 ` Florian Fainelli -1 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-09 20:33 UTC (permalink / raw) To: Rafał Miłecki, Florian Fainelli Cc: Rob Herring, Mark Rutland, Russell King, Hauke Mehrtens, bcm-kernel-feedback-list, devicetree, linux-arm-kernel, linux-leds, Rafał Miłecki On 03/07/2017 10:41 PM, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Applied, thanks! -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger @ 2017-03-09 20:33 ` Florian Fainelli 0 siblings, 0 replies; 18+ messages in thread From: Florian Fainelli @ 2017-03-09 20:33 UTC (permalink / raw) To: linux-arm-kernel On 03/07/2017 10:41 PM, Rafa? Mi?ecki wrote: > From: Rafa? Mi?ecki <rafal@milecki.pl> > > Such a trigger doesn't exist in Linux and is not needed as LED is being > turned off by default. This could cause errors in LEDs core code when > trying to set default trigger. > > Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> Applied, thanks! -- Florian ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2017-03-10 17:44 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-03-08 6:41 [PATCH 1/2] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger Rafał Miłecki 2017-03-08 6:41 ` Rafał Miłecki 2017-03-08 6:41 ` [PATCH 2/2] ARM: dts: BCM5301X: " Rafał Miłecki 2017-03-08 6:41 ` Rafał Miłecki 2017-03-09 20:33 ` Florian Fainelli 2017-03-09 20:33 ` Florian Fainelli 2017-03-08 10:20 ` [PATCH 1/2] ARM: dts: BCM53573: " Pavel Machek 2017-03-08 10:20 ` Pavel Machek 2017-03-08 17:31 ` Florian Fainelli 2017-03-08 17:31 ` Florian Fainelli 2017-03-08 22:20 ` Rafał Miłecki 2017-03-08 22:20 ` Rafał Miłecki 2017-03-10 13:20 ` Pavel Machek 2017-03-10 13:20 ` Pavel Machek 2017-03-10 17:44 ` Florian Fainelli 2017-03-10 17:44 ` Florian Fainelli 2017-03-09 20:33 ` Florian Fainelli 2017-03-09 20:33 ` Florian Fainelli
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.