From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
Date: Mon, 13 Mar 2017 20:35:17 +0100 [thread overview]
Message-ID: <20170313193517.GC10397@lunn.ch> (raw)
In-Reply-To: <89081716-c0e3-236f-4291-e700dbedbd34@milecki.pl>
On Mon, Mar 13, 2017 at 08:15:27PM +0100, Rafa?? Mi??ecki wrote:
> On 03/13/2017 08:14 PM, Andrew Lunn wrote:
> >On Mon, Mar 13, 2017 at 07:48:26PM +0100, Rafa?? Mi??ecki wrote:
> >>On 03/12/2017 06:10 PM, Andrew Lunn wrote:
> >>>>+ chosen {
> >>>>+ bootargs = "console=ttyS0,115200 earlycon";
> >>>
> >>>Using bootargs to pass the serial settings has been deprecated for a
> >>>while. Please use stdout-path instead.
> >>
> >>I tried following patch with my SR400ac (I put Archer C5 aside for now).
> >
> >Hi Rafael
> >
> >Take a look at for example the bcm911360k.dts
> >
> > aliases {
> > serial0 = &uart3;
> > };
> >
> > chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> >You need an alias to the serial device you want to us, and you should
> >list the speed, parity, bits etc.
>
> That was actually my first try (just with s/uart3/uart0) and I got the same problem.
Hi Rafael
Try decompiling the generate .dtb file back to a dts and see if it
looks correct.
Andrew
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
To: Rafa?? Mi??ecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
Cc: Rafa?? Mi??ecki <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
Date: Mon, 13 Mar 2017 20:35:17 +0100 [thread overview]
Message-ID: <20170313193517.GC10397@lunn.ch> (raw)
In-Reply-To: <89081716-c0e3-236f-4291-e700dbedbd34-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
On Mon, Mar 13, 2017 at 08:15:27PM +0100, Rafa?? Mi??ecki wrote:
> On 03/13/2017 08:14 PM, Andrew Lunn wrote:
> >On Mon, Mar 13, 2017 at 07:48:26PM +0100, Rafa?? Mi??ecki wrote:
> >>On 03/12/2017 06:10 PM, Andrew Lunn wrote:
> >>>>+ chosen {
> >>>>+ bootargs = "console=ttyS0,115200 earlycon";
> >>>
> >>>Using bootargs to pass the serial settings has been deprecated for a
> >>>while. Please use stdout-path instead.
> >>
> >>I tried following patch with my SR400ac (I put Archer C5 aside for now).
> >
> >Hi Rafael
> >
> >Take a look at for example the bcm911360k.dts
> >
> > aliases {
> > serial0 = &uart3;
> > };
> >
> > chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> >You need an alias to the serial device you want to us, and you should
> >list the speed, parity, bits etc.
>
> That was actually my first try (just with s/uart3/uart0) and I got the same problem.
Hi Rafael
Try decompiling the generate .dtb file back to a dts and see if it
looks correct.
Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-03-13 19:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-11 12:14 [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2 Rafał Miłecki
2017-03-11 12:14 ` Rafał Miłecki
2017-03-11 17:23 ` Andrew Lunn
2017-03-11 17:23 ` Andrew Lunn
2017-03-11 17:27 ` Rafał Miłecki
2017-03-11 17:27 ` Rafał Miłecki
2017-03-11 21:05 ` Florian Fainelli
2017-03-11 21:05 ` Florian Fainelli
2017-03-13 14:31 ` Jon Mason
2017-03-13 14:31 ` Jon Mason
2017-03-12 17:10 ` Andrew Lunn
2017-03-12 17:10 ` Andrew Lunn
2017-03-13 18:48 ` Rafał Miłecki
2017-03-13 18:48 ` Rafał Miłecki
2017-03-13 19:14 ` Andrew Lunn
2017-03-13 19:14 ` Andrew Lunn
2017-03-13 19:15 ` Rafał Miłecki
2017-03-13 19:15 ` Rafał Miłecki
2017-03-13 19:27 ` Jon Mason
2017-03-13 19:27 ` Jon Mason
2017-03-13 21:37 ` Rafał Miłecki
2017-03-13 21:37 ` Rafał Miłecki
2017-03-13 22:33 ` Andrew Lunn
2017-03-13 22:33 ` Andrew Lunn
2017-03-13 19:35 ` Andrew Lunn [this message]
2017-03-13 19:35 ` Andrew Lunn
2017-03-13 21:46 ` Rafał Miłecki
2017-03-13 21:46 ` Rafał Miłecki
2017-03-14 10:39 ` [PATCH V2] " Rafał Miłecki
2017-03-14 10:39 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170313193517.GC10397@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.