Re: [PATCH 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

[Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>]

Hi Chris,

On Fri, Mar 03, 2017 at 09:01:48AM +0800, Chris Zhong wrote:
> The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
> connected to DSI using four lanes.
> 
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> 
>  .../bindings/display/panel/innolux,p079zca.txt     | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> new file mode 100644
> index 0000000..c40c8e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> @@ -0,0 +1,22 @@
> +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "innolux,p079zca"
> +- power-supply: phandle of the regulator that provides the supply voltage
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> +
> +	&mipi_dsi {
> +		panel {
> +			compatible = "innolux,p079zca";
> +			reg = <0>;

Where's the documentation for this property?

Brian

> +			power-supply = <...>;
> +			backlight = <&backlight>;
> +			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +			status = "okay";
> +		};
> +	};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html