[PATCH] setup-uboot-env-k2g-evm: add set_name_pmmc to bootcmd

[PATCH] setup-uboot-env-k2g-evm: add set_name_pmmc to bootcmd

[Jacob Stiffler]

* set_name_pmmc must be called to set the filename of the pmmc
  firmware.

Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
---
 setup-uboot-env-k2g-evm.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
index c80e506..4944f99 100755
--- a/setup-uboot-env-k2g-evm.sh
+++ b/setup-uboot-env-k2g-evm.sh
@@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi $ubifsimage\"" $cwd/setupBoard.m
 do_expect "\"$prompt\"" "send \"setenv name_kern $kernelimage\"" $cwd/setupBoard.minicom
 do_expect "\"$prompt\"" "send \"setenv name_uboot $ubootimage\"" $cwd/setupBoard.minicom
 
-do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
+do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} set_name_pmmc get_pmmc_\${kern_mode} run_pmmc get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
 
 do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
 
-- 
1.9.1

Re: [PATCH] setup-uboot-env-k2g-evm: add set_name_pmmc to bootcmd

[Denys Dmytriyenko]

Which branch this should go in?

On Mon, Mar 27, 2017 at 09:42:29AM -0400, Jacob Stiffler wrote:
> * set_name_pmmc must be called to set the filename of the pmmc
>   firmware.
> 
> Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
> ---
>  setup-uboot-env-k2g-evm.sh | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
> index c80e506..4944f99 100755
> --- a/setup-uboot-env-k2g-evm.sh
> +++ b/setup-uboot-env-k2g-evm.sh
> @@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi $ubifsimage\"" $cwd/setupBoard.m
>  do_expect "\"$prompt\"" "send \"setenv name_kern $kernelimage\"" $cwd/setupBoard.minicom
>  do_expect "\"$prompt\"" "send \"setenv name_uboot $ubootimage\"" $cwd/setupBoard.minicom
>  
> -do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
> +do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run init_\${fs_mode} set_name_pmmc get_pmmc_\${kern_mode} run_pmmc get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
>  
>  do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
>  
> -- 
> 1.9.1
> 
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago

Re: [PATCH] setup-uboot-env-k2g-evm: add set_name_pmmc to bootcmd

[Stiffler, Jacob]

> -----Original Message-----
> From: Dmytriyenko, Denys
> Sent: Monday, March 27, 2017 9:48 AM
> To: Stiffler, Jacob
> Cc: meta-arago@arago-project.org
> Subject: Re: [meta-arago] [PATCH] setup-uboot-env-k2g-evm: add
> set_name_pmmc to bootcmd
> 
> Which branch this should go in?
> 

Sorry, I messed up the header. This is for tisdk-setup-scripts, not meta-arago.

> On Mon, Mar 27, 2017 at 09:42:29AM -0400, Jacob Stiffler wrote:
> > * set_name_pmmc must be called to set the filename of the pmmc
> >   firmware.
> >
> > Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
> > ---
> >  setup-uboot-env-k2g-evm.sh | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
> > index c80e506..4944f99 100755
> > --- a/setup-uboot-env-k2g-evm.sh
> > +++ b/setup-uboot-env-k2g-evm.sh
> > @@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi
> > $ubifsimage\"" $cwd/setupBoard.m  do_expect "\"$prompt\"" "send
> > \"setenv name_kern $kernelimage\"" $cwd/setupBoard.minicom
> do_expect
> > "\"$prompt\"" "send \"setenv name_uboot $ubootimage\""
> > $cwd/setupBoard.minicom
> >
> > -do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> > init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc
> get_mon_\${kern_mode}
> > run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode}
> > run_kern'\"" $cwd/setupBoard.minicom
> > +do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> > +init_\${fs_mode} set_name_pmmc get_pmmc_\${kern_mode} run_pmmc
> > +get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode}
> > +get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
> >
> >  do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> >
> > --
> > 1.9.1
> >
> > _______________________________________________
> > meta-arago mailing list
> > meta-arago@arago-project.org
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago

Re: [PATCH] setup-uboot-env-k2g-evm: add set_name_pmmc to bootcmd

[Denys Dmytriyenko]

On Mon, Mar 27, 2017 at 09:48:59AM -0400, Stiffler, Jacob wrote:
> > Which branch this should go in?
> 
> Sorry, I messed up the header. This is for tisdk-setup-scripts, not meta-arago.

Well, makes sense - I should have looked at the code... :)


> > On Mon, Mar 27, 2017 at 09:42:29AM -0400, Jacob Stiffler wrote:
> > > * set_name_pmmc must be called to set the filename of the pmmc
> > >   firmware.
> > >
> > > Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
> > > ---
> > >  setup-uboot-env-k2g-evm.sh | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/setup-uboot-env-k2g-evm.sh b/setup-uboot-env-k2g-evm.sh
> > > index c80e506..4944f99 100755
> > > --- a/setup-uboot-env-k2g-evm.sh
> > > +++ b/setup-uboot-env-k2g-evm.sh
> > > @@ -187,7 +187,7 @@ do_expect "\"$prompt\"" "send \"setenv name_ubi
> > > $ubifsimage\"" $cwd/setupBoard.m  do_expect "\"$prompt\"" "send
> > > \"setenv name_kern $kernelimage\"" $cwd/setupBoard.minicom
> > do_expect
> > > "\"$prompt\"" "send \"setenv name_uboot $ubootimage\""
> > > $cwd/setupBoard.minicom
> > >
> > > -do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> > > init_\${fs_mode} get_pmmc_\${kern_mode} run_pmmc
> > get_mon_\${kern_mode}
> > > run_mon findfdt get_fdt_\${kern_mode} get_kern_\${kern_mode}
> > > run_kern'\"" $cwd/setupBoard.minicom
> > > +do_expect "\"$prompt\"" "send \"setenv bootcmd 'run envboot; run
> > > +init_\${fs_mode} set_name_pmmc get_pmmc_\${kern_mode} run_pmmc
> > > +get_mon_\${kern_mode} run_mon findfdt get_fdt_\${kern_mode}
> > > +get_kern_\${kern_mode} run_kern'\"" $cwd/setupBoard.minicom
> > >
> > >  do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
> > >
> > > --
> > > 1.9.1
> > >
> > > _______________________________________________
> > > meta-arago mailing list
> > > meta-arago@arago-project.org
> > > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago