* installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64
@ 2017-03-27 16:30 Metztli Information Technology
2017-03-28 3:00 ` Bug#858849: " Cyril Brulebois
0 siblings, 1 reply; 6+ messages in thread
From: Metztli Information Technology @ 2017-03-27 16:30 UTC (permalink / raw)
To: Debian Bug Tracking System; +Cc: reiserfs-devel
Package: installation-reports
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
Boot method: CD/USB
Image version: https://metztli.it/readOnlyEphemeral/xiuhcohuatl.iso built on Mar 25 08:35 (2017)
Date: Mar 26, 2017, 01:49
Machine: HP Pavilion Notebook PC 2x8192MB RAM
Partitions:
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 3276596 9488 3267108 1% /run
/dev/sda6 reiser4 92791120 5182708 87608412 6% /
tmpfs tmpfs 8191484 7048 8184436 1% /dev/shm
tmpfs tmpfs 5120 4 5116 1% /run/lock
tmpfs tmpfs 8191484 0 8191484 0% /sys/fs/cgroup
/dev/sda9 ext2 136269 80061 48938 63% /boot
tmpfs tmpfs 1638300 8 1638292 1% /run/user/118
tmpfs tmpfs 1638300 20 1638280 1% /run/user/1000
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems: Netboot debian-installer was unable to load firmware from second USB for wifi connection;
accordingly, in another virtual screen, I mounted the 2nd USB and manually copied the firmware
directory onto the installer environment /lib. d-i then detected the wifi signal, etc.
I selected a non-expert installation & d-i proceeded normally, by downloading via SSL from metztli.it
jessie-packport 4.9.16-1+reiser4.0.1 (2017-03-24), reiser4progs 1.1.x, as well as bp replacements of:
nfs-common_1.3.4-2.1_amd64.deb
libgssapi-krb5-2_1.15-1.1_amd64.deb
libk5crypto3_1.15-1.1_amd64.deb
libkrb5-3_1.15-1.1_amd64.deb
libkrb5support0_1.15-1.1_amd64.deb
In this installer I noticed a lot of debugging verbosity (F4), but overall installation was successfull.
In this Reiser4 'retrofitted' d-i, a non-expert install will leave the regular kernel in addition to
the Reiser4-enabled bp kernel.
< https://metztli.it/readOnlyEphemeral/xiuhcohuatl_0.png >
notwithstanding a netstat will show same services available as in a non-reiser4 install.
Regular kernel may be purged by user -- who, if having selected option 'Debian Desktop Environment' will see:
< https://metztli.it/readOnlyEphemeral/xiuhcohuatl_01.png >
Again, as in the last installation, dmesg shows segmentation faults as user operates her/his new jessie, as shown in snapshot:
< https://metztli.it/readOnlyEphemeral/xiuhcohuatl_02.png >
which introduce latency in the operation of the newly installed jessie. These issues will go away by doing:
apt-get -t jessie-backports update
apt-get -t jessie-backports dist-upgrade
Except that non-expert install does not provide jessie-backports option or by default. The user thus has to add directive:
deb http://ftp.debian.org/debian jessie-backports main
(at least) to her/his /etc/apt/sources.list
Finally, unlike user who reported bug 858078 with i915,
< https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858078 >
this system booted normally into a GUI without modification on my part:
lsmod | grep i915
i915 1241088 5
drm_kms_helper 155648 1 i915
drm 360448 6 i915,drm_kms_helper
i2c_algo_bit 16384 1 i915
video 40960 1 i915
button 16384 1 i915
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="8 (jessie) - installer build 20170325-15:09"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux xiuhcohuatl 4.9.0-2+reiser4.0.1-amd64 #1 SMP Debian 4.9.16-1+reiser4.0.1 (2017-03-24) x86_64 Xonecuiltzin
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: ehci-pci
lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: ehci-pci
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: ahci
lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: r8169
lspci -knn: 07:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008b] (rev 34)
lspci -knn: Subsystem: Intel Corporation Device [8086:5315]
lspci -knn: Kernel driver in use: iwlwifi
lspci -knn: 0d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: rtsx_pci
lspci -knn: 0d:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: sdhci-pci
lspci -knn: 13:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1658]
lspci -knn: Kernel driver in use: xhci_hcd
usb-list:
usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 4.9.0-2+reiser4.0.1-amd64 ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 02: EHCI Host Controller [8087:0024]
usb-list: Level 01 Parent 01 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 02 Device 01: xHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Manufacturer: Linux 4.9.0-2+reiser4.0.1-amd64 xhci-hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 02 Device 02: Flash Disk [1976:6025]
usb-list: Level 01 Parent 01 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: USB 2.O
usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage
usb-list:
usb-list: Bus 03 Device 01: xHCI Host Controller [1d6b:0003]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 03
usb-list: Manufacturer: Linux 4.9.0-2+reiser4.0.1-amd64 xhci-hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 04 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 4.9.0-2+reiser4.0.1-amd64 ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 04 Device 02: EHCI Host Controller [8087:0024]
usb-list: Level 01 Parent 01 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 04 Device 03: 2.4G Keyboard Mouse [062a:4101]
usb-list: Level 02 Parent 02 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: MOSART Semi.
usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 01 Driver usbhid
usb-list: Interface 01: Class 03(HID ) Subclass 01 Protocol 02 Driver usbhid
usb-list:
usb-list: Bus 04 Device 04: USB Flash Disk [8644:800b]
usb-list: Level 02 Parent 02 Port 01 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: General
usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage
usb-list:
usb-list: Bus 04 Device 05: USB Flash Disk [8086:0189]
usb-list: Level 02 Parent 02 Port 04 Class e0(wlcon) Subclass 01 Protocol 01
usb-list: Interface 00: Class e0(wlcon) Subclass 01 Protocol 01 Driver <none>
usb-list: Interface 01: Class e0(wlcon) Subclass 01 Protocol 01 Driver <none>
lsmod: Module Size Used by
lsmod: fuse 98304 0
lsmod: ufs 73728 0
lsmod: qnx4 16384 0
lsmod: hfsplus 102400 0
lsmod: hfs 57344 0
lsmod: minix 36864 0
lsmod: msdos 20480 0
lsmod: isofs 40960 0
lsmod: nls_utf8 16384 5
lsmod: dm_mod 118784 0
lsmod: md_mod 131072 0
lsmod: xfs 1232896 0
lsmod: libcrc32c 16384 1 xfs
lsmod: reiser4 442368 1
lsmod: jfs 176128 0
lsmod: btrfs 1056768 0
lsmod: xor 24576 1 btrfs
lsmod: raid6_pq 110592 1 btrfs
lsmod: ntfs 102400 0
lsmod: ext4 593920 1
lsmod: crc16 16384 1 ext4
lsmod: jbd2 106496 1 ext4
lsmod: crc32c_generic 16384 9
lsmod: fscrypto 28672 1 ext4
lsmod: ecb 16384 0
lsmod: mbcache 16384 2 ext4
lsmod: ctr 16384 4
lsmod: ccm 20480 2
lsmod: r8169 81920 0
lsmod: mii 16384 1 r8169
lsmod: arc4 16384 2
lsmod: iwldvm 139264 0
lsmod: mac80211 671744 1 iwldvm
lsmod: iwlwifi 151552 1 iwldvm
lsmod: cfg80211 598016 3 iwlwifi,mac80211,iwldvm
lsmod: rfkill 24576 2 cfg80211
lsmod: nls_ascii 16384 0
lsmod: nls_cp437 20480 0
lsmod: vfat 20480 0
lsmod: fat 69632 2 msdos,vfat
lsmod: uas 24576 0
lsmod: usb_storage 73728 1 uas
lsmod: hid_generic 16384 0
lsmod: usbhid 53248 0
lsmod: hid 118784 2 hid_generic,usbhid
lsmod: sg 32768 0
lsmod: sd_mod 49152 4
lsmod: rtsx_pci_sdmmc 24576 0
lsmod: ahci 36864 3
lsmod: libahci 32768 1 ahci
lsmod: libata 249856 2 ahci,libahci
lsmod: xhci_pci 16384 0
lsmod: ehci_pci 16384 0
lsmod: xhci_hcd 188416 1 xhci_pci
lsmod: sdhci_pci 28672 0
lsmod: ehci_hcd 81920 1 ehci_pci
lsmod: sdhci 45056 1 sdhci_pci
lsmod: scsi_mod 225280 5 sd_mod,usb_storage,libata,uas,sg
lsmod: rtsx_pci 57344 1 rtsx_pci_sdmmc
lsmod: mmc_core 147456 3 rtsx_pci_sdmmc,sdhci,sdhci_pci
lsmod: mfd_core 16384 1 rtsx_pci
lsmod: usbcore 249856 7 usbhid,usb_storage,ehci_hcd,xhci_pci,uas,xhci_hcd,ehci_pci
lsmod: usb_common 16384 1 usbcore
lsmod: thermal 20480 0
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: none 1638300 168 1638132 0% /run
df: devtmpfs 8177124 0 8177124 0% /dev
df: /dev/sda6 92791120 3773320 89017800 4% /target
df: /dev/sda9 136269 100597 28402 78% /target/boot
df: /dev/sda6 92791120 3773320 89017800 4% /dev/.static/dev
df: devtmpfs 8177124 0 8177124 0% /target/dev
free: total used free shared buffers cached
free: Mem: 16382972 4672516 11710456 131108 5188 4045100
free: -/+ buffers/cache: 622228 15760744
free: Swap: 2931808 0 2931808
/proc/cmdline: BOOT_IMAGE=linux vga=788 initrd=initrd.gz --- quiet
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1226.086
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 0
/proc/cpuinfo: initial apicid : 0
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4390.31
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1298.999
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 1
/proc/cpuinfo: initial apicid : 1
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.64
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 2
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1302.221
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 2
/proc/cpuinfo: initial apicid : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.39
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 3
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1330.017
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 3
/proc/cpuinfo: initial apicid : 3
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.36
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 4
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1377.416
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 2
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 4
/proc/cpuinfo: initial apicid : 4
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.38
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 5
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1282.348
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 2
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 5
/proc/cpuinfo: initial apicid : 5
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.38
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 6
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1349.755
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 3
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 6
/proc/cpuinfo: initial apicid : 6
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.38
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 7
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 42
/proc/cpuinfo: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/proc/cpuinfo: stepping : 7
/proc/cpuinfo: microcode : 0x25
/proc/cpuinfo: cpu MHz : 1235.754
/proc/cpuinfo: cache size : 6144 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 8
/proc/cpuinfo: core id : 3
/proc/cpuinfo: cpu cores : 4
/proc/cpuinfo: apicid : 7
/proc/cpuinfo: initial apicid : 7
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 13
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
/proc/cpuinfo: bugs :
/proc/cpuinfo: bogomips : 4391.41
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-0cf7 : PCI Bus 0000:00
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0062-0062 : PNP0C09:00
/proc/ioports: 0062-0062 : EC data
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0066-0066 : PNP0C09:00
/proc/ioports: 0066-0066 : EC cmd
/proc/ioports: 0070-0077 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 00f0-00f0 : PNP0C04:00
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 0400-0453 : pnp 00:00
/proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK
/proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK
/proc/ioports: 0408-040b : ACPI PM_TMR
/proc/ioports: 0420-042f : ACPI GPE0_BLK
/proc/ioports: 0450-0450 : ACPI PM2_CNT_BLK
/proc/ioports: 0454-0457 : pnp 00:02
/proc/ioports: 0458-047f : pnp 00:00
/proc/ioports: 0500-057f : pnp 00:00
/proc/ioports: 0680-069f : pnp 00:00
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 0d00-ffff : PCI Bus 0000:00
/proc/ioports: 1000-100f : pnp 00:00
/proc/ioports: 1010-1013 : pnp 00:00
/proc/ioports: 164e-164f : pnp 00:00
/proc/ioports: 2000-2fff : PCI Bus 0000:0d
/proc/ioports: 3000-3fff : PCI Bus 0000:07
/proc/ioports: 4000-4fff : PCI Bus 0000:01
/proc/ioports: 4000-40ff : 0000:01:00.0
/proc/ioports: 4000-40ff : r8169
/proc/ioports: 5000-503f : 0000:00:02.0
/proc/ioports: 5040-505f : 0000:00:1f.3
/proc/ioports: 5060-507f : 0000:00:1f.2
/proc/ioports: 5060-507f : ahci
/proc/ioports: 5090-5097 : 0000:00:1f.2
/proc/ioports: 5090-5097 : ahci
/proc/ioports: 5098-509f : 0000:00:1f.2
/proc/ioports: 5098-509f : ahci
/proc/ioports: 50b8-50bb : 0000:00:1f.2
/proc/ioports: 50b8-50bb : ahci
/proc/ioports: 50bc-50bf : 0000:00:1f.2
/proc/ioports: 50bc-50bf : ahci
/proc/ioports: ffff-ffff : pnp 00:00
/proc/iomem: 00000000-00000fff : reserved
/proc/iomem: 00001000-0009d7ff : System RAM
/proc/iomem: 0009d800-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : PCI Bus 0000:00
/proc/iomem: 000c0000-000cf1ff : Video ROM
/proc/iomem: 000e0000-000fffff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-ace3efff : System RAM
/proc/iomem: ace3f000-acebefff : reserved
/proc/iomem: acebf000-acfbefff : ACPI Non-volatile Storage
/proc/iomem: acfbf000-acffefff : ACPI Tables
/proc/iomem: acfff000-acffffff : System RAM
/proc/iomem: ad000000-af9fffff : reserved
/proc/iomem: afa00000-feafffff : PCI Bus 0000:00
/proc/iomem: afa00000-afa00fff : pnp 00:05
/proc/iomem: b0000000-bfffffff : 0000:00:02.0
/proc/iomem: b0000000-b1feffff : vesafb
/proc/iomem: c0000000-c03fffff : 0000:00:02.0
/proc/iomem: c0400000-c13fffff : PCI Bus 0000:01
/proc/iomem: c0400000-c0403fff : 0000:01:00.0
/proc/iomem: c0400000-c0403fff : r8169
/proc/iomem: c0404000-c0404fff : 0000:01:00.0
/proc/iomem: c0404000-c0404fff : r8169
/proc/iomem: c1400000-c23fffff : PCI Bus 0000:07
/proc/iomem: c2400000-c33fffff : PCI Bus 0000:0d
/proc/iomem: c3400000-c34fffff : PCI Bus 0000:13
/proc/iomem: c3400000-c3401fff : 0000:13:00.0
/proc/iomem: c3400000-c3401fff : xhci-hcd
/proc/iomem: c3500000-c44fffff : PCI Bus 0000:0d
/proc/iomem: c3500000-c35000ff : 0000:0d:00.1
/proc/iomem: c3500000-c35000ff : mmc0
/proc/iomem: c3501000-c3501fff : 0000:0d:00.0
/proc/iomem: c3501000-c3501fff : rtsx_pci
/proc/iomem: c3510000-c351ffff : 0000:0d:00.0
/proc/iomem: c4500000-c54fffff : PCI Bus 0000:07
/proc/iomem: c4500000-c4501fff : 0000:07:00.0
/proc/iomem: c4500000-c4501fff : iwlwifi
/proc/iomem: c5500000-c64fffff : PCI Bus 0000:01
/proc/iomem: c6500000-c6503fff : 0000:00:1b.0
/proc/iomem: c6504000-c650400f : 0000:00:16.0
/proc/iomem: c6506000-c65060ff : 0000:00:1f.3
/proc/iomem: c6508000-c65087ff : 0000:00:1f.2
/proc/iomem: c6508000-c65087ff : ahci
/proc/iomem: c6509000-c65093ff : 0000:00:1d.0
/proc/iomem: c6509000-c65093ff : ehci_hcd
/proc/iomem: c650a000-c650a3ff : 0000:00:1a.0
/proc/iomem: c650a000-c650a3ff : ehci_hcd
/proc/iomem: e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
/proc/iomem: e0000000-efffffff : reserved
/proc/iomem: e0000000-efffffff : pnp 00:05
/proc/iomem: feb00000-feb03fff : reserved
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fec00000-fec003ff : IOAPIC 0
/proc/iomem: fed00000-fed003ff : HPET 0
/proc/iomem: fed00000-fed003ff : PNP0103:00
/proc/iomem: fed10000-fed19fff : reserved
/proc/iomem: fed10000-fed17fff : pnp 00:05
/proc/iomem: fed18000-fed18fff : pnp 00:05
/proc/iomem: fed19000-fed19fff : pnp 00:05
/proc/iomem: fed1c000-fed1ffff : reserved
/proc/iomem: fed1c000-fed1ffff : pnp 00:05
/proc/iomem: fed20000-fed3ffff : pnp 00:05
/proc/iomem: fed90000-fed93fff : pnp 00:05
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ff000000-ffffffff : INT0800:00
/proc/iomem: ffd80000-ffffffff : reserved
/proc/iomem: 100000000-44fdfffff : System RAM
/proc/iomem: 268c00000-2691f343d : Kernel code
/proc/iomem: 2691f343e-2697295ff : Kernel data
/proc/iomem: 26988f000-26993bfff : Kernel bss
/proc/iomem: 44fe00000-44fffffff : RAM buffer
/proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
/proc/interrupts: 0: 20 0 0 0 0 0 0 0 IO-APIC 2-edge timer
/proc/interrupts: 1: 17223 0 0 0 0 0 0 0 IO-APIC 1-edge i8042
/proc/interrupts: 8: 20 0 0 0 0 0 0 0 IO-APIC 8-edge rtc0
/proc/interrupts: 9: 268 0 0 0 0 0 0 0 IO-APIC 9-fasteoi acpi
/proc/interrupts: 12: 2 0 0 0 0 0 0 0 IO-APIC 12-edge i8042
/proc/interrupts: 16: 51 0 0 0 0 0 0 0 IO-APIC 16-fasteoi ehci_hcd:usb1
/proc/interrupts: 19: 0 0 0 0 0 0 0 0 IO-APIC 19-fasteoi mmc0
/proc/interrupts: 20: 180719 0 0 0 0 0 0 0 IO-APIC 20-fasteoi ehci_hcd:usb4
/proc/interrupts: 25: 8 0 0 0 0 0 0 0 PCI-MSI 6815744-edge rtsx_pci
/proc/interrupts: 26: 84166 0 0 0 0 0 0 0 PCI-MSI 9961472-edge xhci_hcd
/proc/interrupts: 27: 0 0 0 0 0 0 0 0 PCI-MSI 9961473-edge xhci_hcd
/proc/interrupts: 28: 0 0 0 0 0 0 0 0 PCI-MSI 9961474-edge xhci_hcd
/proc/interrupts: 29: 0 0 0 0 0 0 0 0 PCI-MSI 9961475-edge xhci_hcd
/proc/interrupts: 30: 0 0 0 0 0 0 0 0 PCI-MSI 9961476-edge xhci_hcd
/proc/interrupts: 31: 0 0 0 0 0 0 0 0 PCI-MSI 9961477-edge xhci_hcd
/proc/interrupts: 32: 0 0 0 0 0 0 0 0 PCI-MSI 9961478-edge xhci_hcd
/proc/interrupts: 33: 0 0 0 0 0 0 0 0 PCI-MSI 9961479-edge xhci_hcd
/proc/interrupts: 34: 1970111 0 0 0 0 0 0 0 PCI-MSI 512000-edge ahci[0000:00:1f.2]
/proc/interrupts: 35: 1650131 0 0 0 0 0 0 0 PCI-MSI 3670016-edge iwlwifi
/proc/interrupts: NMI: 38 10 26 6 25 8 26 10 Non-maskable interrupts
/proc/interrupts: LOC: 2603214 484109 9920040 600277 9771842 701686 6514726 639310 Local timer interrupts
/proc/interrupts: SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
/proc/interrupts: PMI: 38 10 26 6 25 8 26 10 Performance monitoring interrupts
/proc/interrupts: IWI: 1 0 0 0 0 0 0 0 IRQ work interrupts
/proc/interrupts: RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
/proc/interrupts: RES: 18446 20097 9052 2649 4721 1485 8827 5427 Rescheduling interrupts
/proc/interrupts: CAL: 2853 1665 2931 1790 2957 1784 2743 1539 Function call interrupts
/proc/interrupts: TLB: 1807 496 1811 654 1873 656 1568 486 TLB shootdowns
/proc/interrupts: TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
/proc/interrupts: THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
/proc/interrupts: DFR: 0 0 0 0 0 0 0 0 Deferred Error APIC interrupts
/proc/interrupts: MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
/proc/interrupts: MCP: 186 186 186 186 186 186 186 186 Machine check polls
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/interrupts: PIN: 0 0 0 0 0 0 0 0 Posted-interrupt notification event
/proc/interrupts: PIW: 0 0 0 0 0 0 0 0 Posted-interrupt wakeup event
/proc/meminfo: MemTotal: 16382972 kB
/proc/meminfo: MemFree: 11709716 kB
/proc/meminfo: MemAvailable: 15803308 kB
/proc/meminfo: Buffers: 5188 kB
/proc/meminfo: Cached: 4045132 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 3962252 kB
/proc/meminfo: Inactive: 117016 kB
/proc/meminfo: Active(anon): 117384 kB
/proc/meminfo: Inactive(anon): 42656 kB
/proc/meminfo: Active(file): 3844868 kB
/proc/meminfo: Inactive(file): 74360 kB
/proc/meminfo: Unevictable: 0 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: SwapTotal: 2931808 kB
/proc/meminfo: SwapFree: 2931808 kB
/proc/meminfo: Dirty: 3036 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 28560 kB
/proc/meminfo: Mapped: 6344 kB
/proc/meminfo: Shmem: 131108 kB
/proc/meminfo: Slab: 534472 kB
/proc/meminfo: SReclaimable: 513100 kB
/proc/meminfo: SUnreclaim: 21372 kB
/proc/meminfo: KernelStack: 2724 kB
/proc/meminfo: PageTables: 924 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 11123292 kB
/proc/meminfo: Committed_AS: 175412 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 0 kB
/proc/meminfo: VmallocChunk: 0 kB
/proc/meminfo: HardwareCorrupted: 0 kB
/proc/meminfo: AnonHugePages: 0 kB
/proc/meminfo: ShmemHugePages: 0 kB
/proc/meminfo: ShmemPmdMapped: 0 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 2048 kB
/proc/meminfo: DirectMap4k: 186624 kB
/proc/meminfo: DirectMap2M: 16537600 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/devices/platform/i8042/serio0/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=sysrq kbd leds
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=062a Product=4101 Version=0110
/proc/bus/input/devices: N: Name="MOSART Semi. 2.4G Keyboard Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1.1/input0
/proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:062A:4101.0001/input/input2
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=sysrq kbd leds
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=062a Product=4101 Version=0110
/proc/bus/input/devices: N: Name="MOSART Semi. 2.4G Keyboard Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1.1/input1
/proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:062A:4101.0002/input/input3
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd mouse0
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=1f
/proc/bus/input/devices: B: KEY=3f0003007f 0 0 483ffff17aff32d bf54444600000000 1f0001 130f938b17c000 677bfad941dfed 9ed68000004400 10000002
/proc/bus/input/devices: B: REL=1c3
/proc/bus/input/devices: B: ABS=1f0100000000
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
-- System Information:
Debian Release: 8.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-2+reiser4.0.1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Bug#858849: installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64
2017-03-27 16:30 installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64 Metztli Information Technology
@ 2017-03-28 3:00 ` Cyril Brulebois
2017-03-29 12:10 ` Jose R R
0 siblings, 1 reply; 6+ messages in thread
From: Cyril Brulebois @ 2017-03-28 3:00 UTC (permalink / raw)
To: Metztli Information Technology, 858849; +Cc: reiserfs-devel
[-- Attachment #1: Type: text/plain, Size: 506 bytes --]
Hi,
Metztli Information Technology <jose@metztli-it.com> (2017-03-27):
> Boot method: CD/USB
> Image version: https://metztli.it/readOnlyEphemeral/xiuhcohuatl.iso built on Mar 25 08:35 (2017)
> Date: Mar 26, 2017, 01:49
A couple of months ago, I asked:
| Do we need to get installation reports for non-Debian installers?
| This isn't something we produce, publish, or support, so…
It would be nice if those installation reports could be sent elsewhere;
thanks already.
KiBi.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Bug#858849: installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64
2017-03-28 3:00 ` Bug#858849: " Cyril Brulebois
@ 2017-03-29 12:10 ` Jose R R
2017-03-29 15:48 ` Cyril Brulebois
0 siblings, 1 reply; 6+ messages in thread
From: Jose R R @ 2017-03-29 12:10 UTC (permalink / raw)
To: Cyril Brulebois; +Cc: 858849, ReiserFS Development List
Niltze,
On Mon, Mar 27, 2017 at 8:00 PM, Cyril Brulebois <kibi@debian.org> wrote:
> Hi,
>
> Metztli Information Technology <jose@metztli-it.com> (2017-03-27):
>> Boot method: CD/USB
>> Image version: https://metztli.it/readOnlyEphemeral/xiuhcohuatl.iso built on Mar 25 08:35 (2017)
>> Date: Mar 26, 2017, 01:49
>
> A couple of months ago, I asked:
> | Do we need to get installation reports for non-Debian installers?
> | This isn't something we produce, publish, or support, so…
>
> It would be nice if those installation reports could be sent elsewhere;
> thanks already.
>
>
> KiBi.
With all due respect, 99% of the build code for the debian-installer
is yours. As well as the build pulls 99% UDEBs from official debian
repositories.
i.e., this is a Debian issue, not mine -- as I did not even touch that
code and/or modules -- which 1 month ago actually did work smooth:
Netboot debian-installer was unable to load firmware from second USB
for wifi connection;
accordingly, in another virtual screen, I mounted the 2nd USB and
manually copied the firmware
directory onto the installer environment /lib. d-i then detected the
wifi signal, etc.
Second, report on this unofficial jessie-backports kernel
4.9.16-1+reiser4.0.1 sheds light on the fact I experienced *no issue*
with module i915, as had been reported by (maintainer?):
< https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858078 >
thus, in a collateral manner, I am contributing to official debian development.
Finally, I am not requesting *any* support. I am simply reporting that
your d-i pulling official UDEBs actually have been successful, with
minor modifications and a few extra UDEBs of mine, in my installation
experience, following Debian documentation guidelines:
"We also encourage installation reports to be sent even if the
installation is successful, so that we can get as much information as
possible on the largest number of hardware configurations."
< https://www.debian.org/releases/stable/amd64/ch05s04.html.en#submit-bug >
If you are still 'bothered' with my sporadic submissions, I encourage
you to modify the documentation to specifically exclude the glaring
omission.
Best Professional Regards.
--
Jose R R
http://metztli.it
---------------------------------------------------------------------------------------------
Download Debian-Reiser4 for AMD64 https://sf.net/projects/debian-reiser4/
---------------------------------------------------------------------------------------------
Try at no charge http://b2evolution.net for http://OpenShift.com PaaS
---------------------------------------------------------------------------------------------
from our GitHub http://Nepohualtzintzin.com repository. Cloud the easy way!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Bug#858849: installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64
2017-03-29 12:10 ` Jose R R
@ 2017-03-29 15:48 ` Cyril Brulebois
2017-03-29 16:27 ` Jose R R
0 siblings, 1 reply; 6+ messages in thread
From: Cyril Brulebois @ 2017-03-29 15:48 UTC (permalink / raw)
To: Jose R R; +Cc: 858849, ReiserFS Development List
[-- Attachment #1: Type: text/plain, Size: 2743 bytes --]
Hi,
Jose R R <jose@metztli-it.com> (2017-03-29):
> With all due respect, 99% of the build code for the debian-installer
> is yours. As well as the build pulls 99% UDEBs from official debian
> repositories.
That doesn't mean that everything built on top of it has to be reported
on Debian mailing lists and bug tracker. See derivative distributions,
they have their own issue tracker, and only forward specific issues.
> i.e., this is a Debian issue, not mine -- as I did not even touch that
> code and/or modules -- which 1 month ago actually did work smooth:
>
> Netboot debian-installer was unable to load firmware from second USB
> for wifi connection; accordingly, in another virtual screen, I mounted
> the 2nd USB and manually copied the firmware directory onto the
> installer environment /lib. d-i then detected the wifi signal, etc.
>
>
> Second, report on this unofficial jessie-backports kernel
> 4.9.16-1+reiser4.0.1 sheds light on the fact I experienced *no issue*
> with module i915, as had been reported by (maintainer?): <
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858078 > thus, in a
> collateral manner, I am contributing to official debian development.
If you want to reply to submitters/maintainers, reply to specific bug
reports/threads, instead of sending lengthy mails to other people?
> Finally, I am not requesting *any* support. I am simply reporting that
> your d-i pulling official UDEBs actually have been successful, with
> minor modifications and a few extra UDEBs of mine, in my installation
> experience, following Debian documentation guidelines:
I haven't put words in your mouth and suggested you were requesting some
support. I'm just not convinced such reports are useful. If you
encounter specific issues, report specific bug reports against the
relevant component.
debian-boot@ isn't and shouldn't be the destination of each and every
thing connected to, or merely using, Debian Installer.
> "We also encourage installation reports to be sent even if the
> installation is successful, so that we can get as much information as
> possible on the largest number of hardware configurations." <
> https://www.debian.org/releases/stable/amd64/ch05s04.html.en#submit-bug
> >
Sure, with official images.
> If you are still 'bothered' with my sporadic submissions, I encourage
> you to modify the documentation to specifically exclude the glaring
> omission.
I could be adding a specific “we don't need reiser4-specific reports”
there, but I would hope this isn't needed, since the only submitter of
such reports against images we don't build, publish, or support, seems
to be you.
Thanks for your cooperation.
KiBi.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Bug#858849: installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64
2017-03-29 15:48 ` Cyril Brulebois
@ 2017-03-29 16:27 ` Jose R R
2017-03-29 16:46 ` Steve McIntyre
0 siblings, 1 reply; 6+ messages in thread
From: Jose R R @ 2017-03-29 16:27 UTC (permalink / raw)
To: Cyril Brulebois; +Cc: 858849, ReiserFS Development List
Niltze,
On Wed, Mar 29, 2017 at 8:48 AM, Cyril Brulebois <kibi@debian.org> wrote:
> Hi,
>
> Jose R R <jose@metztli-it.com> (2017-03-29):
>> With all due respect, 99% of the build code for the debian-installer
>> is yours. As well as the build pulls 99% UDEBs from official debian
>> repositories.
>
> That doesn't mean that everything built on top of it has to be reported
> on Debian mailing lists and bug tracker. See derivative distributions,
> they have their own issue tracker, and only forward specific issues.
>
>> i.e., this is a Debian issue, not mine -- as I did not even touch that
>> code and/or modules -- which 1 month ago actually did work smooth:
>>
>> Netboot debian-installer was unable to load firmware from second USB
>> for wifi connection; accordingly, in another virtual screen, I mounted
>> the 2nd USB and manually copied the firmware directory onto the
>> installer environment /lib. d-i then detected the wifi signal, etc.
>>
>>
>> Second, report on this unofficial jessie-backports kernel
>> 4.9.16-1+reiser4.0.1 sheds light on the fact I experienced *no issue*
>> with module i915, as had been reported by (maintainer?): <
>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858078 > thus, in a
>> collateral manner, I am contributing to official debian development.
>
> If you want to reply to submitters/maintainers, reply to specific bug
> reports/threads, instead of sending lengthy mails to other people?
>
>> Finally, I am not requesting *any* support. I am simply reporting that
>> your d-i pulling official UDEBs actually have been successful, with
>> minor modifications and a few extra UDEBs of mine, in my installation
>> experience, following Debian documentation guidelines:
>
> I haven't put words in your mouth and suggested you were requesting some
> support. I'm just not convinced such reports are useful. If you
> encounter specific issues, report specific bug reports against the
> relevant component.
>
> debian-boot@ isn't and shouldn't be the destination of each and every
> thing connected to, or merely using, Debian Installer.
>
>> "We also encourage installation reports to be sent even if the
>> installation is successful, so that we can get as much information as
>> possible on the largest number of hardware configurations." <
>> https://www.debian.org/releases/stable/amd64/ch05s04.html.en#submit-bug
>> >
>
> Sure, with official images.
>
>> If you are still 'bothered' with my sporadic submissions, I encourage
>> you to modify the documentation to specifically exclude the glaring
>> omission.
>
> I could be adding a specific “we don't need reiser4-specific reports”
Please do add that phrase; thus removing any ambiguities and cover the
glaring omission in the Debian documentation.
That clarification will prevent other individuals -- who have
downloaded the netboot installer from SourceForge -- from potentially
reporting via the debian mechanism -- once the installation completes.
Additionally, appending “we don't need reiser4-specific reports” will
be a welcome *explicit* change in policy from other FOSS projects,
like GNU Parted, where the unspoken censorship on reiser4 bites anyone
who submits patches in support of the
'Batman Machine': Reiser4
< https://metztli.it/readOnlyEphemeral/Batman_Machine-Reiser4.pdf >
Again, thank you.
Best Professional Regards.
--
Jose R R
http://metztli.it
---------------------------------------------------------------------------------------------
Download Debian-Reiser4 for AMD64 https://sf.net/projects/debian-reiser4/
---------------------------------------------------------------------------------------------
Try at no charge http://b2evolution.net for http://OpenShift.com PaaS
---------------------------------------------------------------------------------------------
from our GitHub http://Nepohualtzintzin.com repository. Cloud the easy way!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Bug#858849: installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64
2017-03-29 16:27 ` Jose R R
@ 2017-03-29 16:46 ` Steve McIntyre
0 siblings, 0 replies; 6+ messages in thread
From: Steve McIntyre @ 2017-03-29 16:46 UTC (permalink / raw)
To: Jose R R, 858849; +Cc: Cyril Brulebois, ReiserFS Development List
Hi,
On Wed, Mar 29, 2017 at 09:27:42AM -0700, Jose R R wrote:
>On Wed, Mar 29, 2017 at 8:48 AM, Cyril Brulebois <kibi@debian.org> wrote:
>> Jose R R <jose@metztli-it.com> (2017-03-29):
>>
>>> "We also encourage installation reports to be sent even if the
>>> installation is successful, so that we can get as much information as
>>> possible on the largest number of hardware configurations." <
>>> https://www.debian.org/releases/stable/amd64/ch05s04.html.en#submit-bug
>>> >
>>
>> Sure, with official images.
>>
>>> If you are still 'bothered' with my sporadic submissions, I encourage
>>> you to modify the documentation to specifically exclude the glaring
>>> omission.
>>
>> I could be adding a specific “we don't need reiser4-specific reports”
>
>Please do add that phrase; thus removing any ambiguities and cover the
>glaring omission in the Debian documentation.
It's hardly a "glaring omission" that we don't list *explicitly*:
* we don't want reiser4-specific reports
* we don't want Ubuntu installation reports
* we don't want installation reports about other modified images
You're reading the "Installation Guide for Debian", not the
"Installation Guide for every unofficial user-modified version of
Debian". The docs are meant to describe how to install Debian using
Debian's installer - is that not obvious?
>That clarification will prevent other individuals -- who have
>downloaded the netboot installer from SourceForge -- from potentially
>reporting via the debian mechanism -- once the installation completes.
>
>Additionally, appending “we don't need reiser4-specific reports” will
>be a welcome *explicit* change in policy from other FOSS projects,
>like GNU Parted, where the unspoken censorship on reiser4 bites anyone
>who submits patches in support of the
>'Batman Machine': Reiser4
>< https://metztli.it/readOnlyEphemeral/Batman_Machine-Reiser4.pdf >
I understand that you're working on reiser4 stuff and you'd like to
publicise it - that's cool and I hope it's working well for you! But
spamming us here is *not* helping. OK?
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-03-29 16:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-27 16:30 installation-reports: Successful Jessie installation with backported kernel 4.9.16-1+reiser4.0.1 on i915 system AMD64 Metztli Information Technology
2017-03-28 3:00 ` Bug#858849: " Cyril Brulebois
2017-03-29 12:10 ` Jose R R
2017-03-29 15:48 ` Cyril Brulebois
2017-03-29 16:27 ` Jose R R
2017-03-29 16:46 ` Steve McIntyre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.