[PATCH v2 5/8] NFC: nfcmrvl: fix firmware-management initialisation

[Johan Hovold <johan@kernel.org>]

The nci-device was never deregistered in the event that
fw-initialisation failed.

Fix this by moving the firmware initialisation before device
registration since the firmware work queue should be available before
registering.

Note that this depends on a recent fix that moved device-name
initialisation back to to nci_allocate_device() as the
firmware-workqueue name is now derived from the nfc-device name.

Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Cc: stable <stable@vger.kernel.org>     # 4.4
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/nfc/nfcmrvl/main.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index 3e3fc9588f10..a446590a71ca 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -158,26 +158,28 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
 		goto error_free_gpio;
 	}
 
+	rc = nfcmrvl_fw_dnld_init(priv);
+	if (rc) {
+		nfc_err(dev, "failed to initialize FW download %d\n", rc);
+		goto error_free_dev;
+	}
+
 	nci_set_drvdata(priv->ndev, priv);
 
 	rc = nci_register_device(priv->ndev);
 	if (rc) {
 		nfc_err(dev, "nci_register_device failed %d\n", rc);
-		goto error_free_dev;
+		goto error_fw_dnld_deinit;
 	}
 
 	/* Ensure that controller is powered off */
 	nfcmrvl_chip_halt(priv);
 
-	rc = nfcmrvl_fw_dnld_init(priv);
-	if (rc) {
-		nfc_err(dev, "failed to initialize FW download %d\n", rc);
-		goto error_free_dev;
-	}
-
 	nfc_info(dev, "registered with nci successfully\n");
 	return priv;
 
+error_fw_dnld_deinit:
+	nfcmrvl_fw_dnld_deinit(priv);
 error_free_dev:
 	nci_free_device(priv->ndev);
 error_free_gpio:
-- 
2.12.2