From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] dts: arm64: add DPAA QBMan portals
Date: Fri, 31 Mar 2017 09:49:47 +0800 [thread overview]
Message-ID: <20170331014945.GH683@dragon> (raw)
In-Reply-To: <1490884672-18294-2-git-send-email-madalin.bucur@nxp.com>
On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote:
> Add the DPAA 1.x DPAA QMan and BMan portal nodes.
>
> Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
The patches should be prefixed like 'arm64: dts: ...'.
> ---
> .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++
> .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++
> 2 files changed, 143 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
What does the suffix number '1' mean here?
>
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> new file mode 100644
> index 0000000..b007344
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> @@ -0,0 +1,67 @@
> +/*
> + * QorIQ BMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&bportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + bman-portal at 0 {
> + compatible = "fsl,bman-portal";
The bindings/soc/fsl/bman-portals.txt says: Must include
"fsl,bman-portal-<hardware revision>".
> + reg = <0x0 0x4000 0x4000000 0x4000>;
Can we write it in the same way how the example in the bindings doc
does?
reg = <0x0 0x4000>, <0x4000000 0x4000>;
It's more obvious to tell that it has two memory regions.
> + interrupts = <0 173 0x4>;
Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by
headers in include/dt-bindings/interrupt-controller/ to make it more
readable?
Shawn
> + };
> +
> + bman-portal at 10000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 175 0x4>;
> + };
> +
> + bman-portal at 20000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 177 0x4>;
> + };
> +
> + bman-portal at 30000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 179 0x4>;
> + };
> +
> + bman-portal at 40000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 181 0x4>;
> + };
> +
> + bman-portal at 50000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 183 0x4>;
> + };
> +
> + bman-portal at 60000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 185 0x4>;
> + };
> +
> + bman-portal at 70000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 187 0x4>;
> + };
> +
> + bman-portal at 80000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 189 0x4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> new file mode 100644
> index 0000000..4baec2c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * QorIQ QMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&qportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + qportal0: qman-portal at 0 {
> + compatible = "fsl,qman-portal";
> + reg = <0x0 0x4000 0x4000000 0x4000>;
> + interrupts = <0 172 0x4>;
> + cell-index = <0>;
> + };
> +
> + qportal1: qman-portal at 10000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 174 0x4>;
> + cell-index = <1>;
> + };
> +
> + qportal2: qman-portal at 20000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 176 0x4>;
> + cell-index = <2>;
> + };
> +
> + qportal3: qman-portal at 30000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 178 0x4>;
> + cell-index = <3>;
> + };
> +
> + qportal4: qman-portal at 40000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 180 0x4>;
> + cell-index = <4>;
> + };
> +
> + qportal5: qman-portal at 50000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 182 0x4>;
> + cell-index = <5>;
> + };
> +
> + qportal6: qman-portal at 60000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 184 0x4>;
> + cell-index = <6>;
> + };
> +
> + qportal7: qman-portal at 70000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 186 0x4>;
> + cell-index = <7>;
> + };
> +
> + qportal8: qman-portal at 80000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 188 0x4>;
> + cell-index = <8>;
> + };
> +};
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org>
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Gang.Liu-3arQi8VN3Tc@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org>,
will.deacon-5wv7dgnIgG8@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 1/3] dts: arm64: add DPAA QBMan portals
Date: Fri, 31 Mar 2017 09:49:47 +0800 [thread overview]
Message-ID: <20170331014945.GH683@dragon> (raw)
In-Reply-To: <1490884672-18294-2-git-send-email-madalin.bucur-3arQi8VN3Tc@public.gmane.org>
On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote:
> Add the DPAA 1.x DPAA QMan and BMan portal nodes.
>
> Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org>
> Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org>
The patches should be prefixed like 'arm64: dts: ...'.
> ---
> .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++
> .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++
> 2 files changed, 143 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
What does the suffix number '1' mean here?
>
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> new file mode 100644
> index 0000000..b007344
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> @@ -0,0 +1,67 @@
> +/*
> + * QorIQ BMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&bportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + bman-portal@0 {
> + compatible = "fsl,bman-portal";
The bindings/soc/fsl/bman-portals.txt says: Must include
"fsl,bman-portal-<hardware revision>".
> + reg = <0x0 0x4000 0x4000000 0x4000>;
Can we write it in the same way how the example in the bindings doc
does?
reg = <0x0 0x4000>, <0x4000000 0x4000>;
It's more obvious to tell that it has two memory regions.
> + interrupts = <0 173 0x4>;
Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by
headers in include/dt-bindings/interrupt-controller/ to make it more
readable?
Shawn
> + };
> +
> + bman-portal@10000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 175 0x4>;
> + };
> +
> + bman-portal@20000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 177 0x4>;
> + };
> +
> + bman-portal@30000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 179 0x4>;
> + };
> +
> + bman-portal@40000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 181 0x4>;
> + };
> +
> + bman-portal@50000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 183 0x4>;
> + };
> +
> + bman-portal@60000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 185 0x4>;
> + };
> +
> + bman-portal@70000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 187 0x4>;
> + };
> +
> + bman-portal@80000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 189 0x4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> new file mode 100644
> index 0000000..4baec2c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * QorIQ QMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&qportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + qportal0: qman-portal@0 {
> + compatible = "fsl,qman-portal";
> + reg = <0x0 0x4000 0x4000000 0x4000>;
> + interrupts = <0 172 0x4>;
> + cell-index = <0>;
> + };
> +
> + qportal1: qman-portal@10000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 174 0x4>;
> + cell-index = <1>;
> + };
> +
> + qportal2: qman-portal@20000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 176 0x4>;
> + cell-index = <2>;
> + };
> +
> + qportal3: qman-portal@30000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 178 0x4>;
> + cell-index = <3>;
> + };
> +
> + qportal4: qman-portal@40000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 180 0x4>;
> + cell-index = <4>;
> + };
> +
> + qportal5: qman-portal@50000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 182 0x4>;
> + cell-index = <5>;
> + };
> +
> + qportal6: qman-portal@60000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 184 0x4>;
> + cell-index = <6>;
> + };
> +
> + qportal7: qman-portal@70000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 186 0x4>;
> + cell-index = <7>;
> + };
> +
> + qportal8: qman-portal@80000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 188 0x4>;
> + cell-index = <8>;
> + };
> +};
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Madalin Bucur <madalin.bucur@nxp.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, Gang.Liu@nxp.com,
catalin.marinas@arm.com, Roy Pledge <roy.pledge@nxp.com>,
will.deacon@arm.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/3] dts: arm64: add DPAA QBMan portals
Date: Fri, 31 Mar 2017 09:49:47 +0800 [thread overview]
Message-ID: <20170331014945.GH683@dragon> (raw)
In-Reply-To: <1490884672-18294-2-git-send-email-madalin.bucur@nxp.com>
On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote:
> Add the DPAA 1.x DPAA QMan and BMan portal nodes.
>
> Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
The patches should be prefixed like 'arm64: dts: ...'.
> ---
> .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++
> .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++
> 2 files changed, 143 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
What does the suffix number '1' mean here?
>
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> new file mode 100644
> index 0000000..b007344
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> @@ -0,0 +1,67 @@
> +/*
> + * QorIQ BMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&bportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + bman-portal@0 {
> + compatible = "fsl,bman-portal";
The bindings/soc/fsl/bman-portals.txt says: Must include
"fsl,bman-portal-<hardware revision>".
> + reg = <0x0 0x4000 0x4000000 0x4000>;
Can we write it in the same way how the example in the bindings doc
does?
reg = <0x0 0x4000>, <0x4000000 0x4000>;
It's more obvious to tell that it has two memory regions.
> + interrupts = <0 173 0x4>;
Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by
headers in include/dt-bindings/interrupt-controller/ to make it more
readable?
Shawn
> + };
> +
> + bman-portal@10000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 175 0x4>;
> + };
> +
> + bman-portal@20000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 177 0x4>;
> + };
> +
> + bman-portal@30000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 179 0x4>;
> + };
> +
> + bman-portal@40000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 181 0x4>;
> + };
> +
> + bman-portal@50000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 183 0x4>;
> + };
> +
> + bman-portal@60000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 185 0x4>;
> + };
> +
> + bman-portal@70000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 187 0x4>;
> + };
> +
> + bman-portal@80000 {
> + compatible = "fsl,bman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 189 0x4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> new file mode 100644
> index 0000000..4baec2c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * QorIQ QMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&qportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + qportal0: qman-portal@0 {
> + compatible = "fsl,qman-portal";
> + reg = <0x0 0x4000 0x4000000 0x4000>;
> + interrupts = <0 172 0x4>;
> + cell-index = <0>;
> + };
> +
> + qportal1: qman-portal@10000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 174 0x4>;
> + cell-index = <1>;
> + };
> +
> + qportal2: qman-portal@20000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 176 0x4>;
> + cell-index = <2>;
> + };
> +
> + qportal3: qman-portal@30000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 178 0x4>;
> + cell-index = <3>;
> + };
> +
> + qportal4: qman-portal@40000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 180 0x4>;
> + cell-index = <4>;
> + };
> +
> + qportal5: qman-portal@50000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 182 0x4>;
> + cell-index = <5>;
> + };
> +
> + qportal6: qman-portal@60000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 184 0x4>;
> + cell-index = <6>;
> + };
> +
> + qportal7: qman-portal@70000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 186 0x4>;
> + cell-index = <7>;
> + };
> +
> + qportal8: qman-portal@80000 {
> + compatible = "fsl,qman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 188 0x4>;
> + cell-index = <8>;
> + };
> +};
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-03-31 1:49 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 14:37 [PATCH 0/3] introduce QorIQ DPAA 1.x QBMan device tree nodes Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-30 14:37 ` [PATCH 1/3] dts: arm64: add DPAA QBMan portals Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-31 1:49 ` Shawn Guo [this message]
2017-03-31 1:49 ` Shawn Guo
2017-03-31 1:49 ` Shawn Guo
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-03-30 14:37 ` [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-31 2:02 ` Shawn Guo
2017-03-31 2:02 ` Shawn Guo
2017-03-31 2:02 ` Shawn Guo
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-03-30 14:37 ` [PATCH 3/3] dts: arm64: add LS1046A " Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-30 14:37 ` Madalin Bucur
2017-03-31 2:29 ` Shawn Guo
2017-03-31 2:29 ` Shawn Guo
2017-03-31 2:29 ` Shawn Guo
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-05-12 14:14 ` Madalin-Cristian Bucur
2017-05-12 14:14 ` Madalin-Cristian Bucur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170331014945.GH683@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.