All of lore.kernel.org
 help / color / mirror / Atom feed
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: hi6220: Reset the mmc hosts
Date: Fri, 7 Apr 2017 15:45:09 +0200	[thread overview]
Message-ID: <20170407134509.GK2078@mai> (raw)
In-Reply-To: <1489673004-11075-1-git-send-email-daniel.lezcano@linaro.org>

On Thu, Mar 16, 2017 at 03:03:24PM +0100, Daniel Lezcano wrote:
> The MMC hosts could be left in an unconsistent or uninitialized state from
> the firmware. Instead of assuming, the firmware did the right things, let's
> reset the host controllers.
> 
> This change fixes a bug when the mmc2/sdio is initialized leading to a hung
> task:
> 
> [  242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds.
> [  242.711129]       Not tainted 4.9.0-rc8-00017-gcf0251f #3
> [  242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  242.724435] kworker/7:1     D    0   675      2 0x00000000
> [  242.729973] Workqueue: events_freezable mmc_rescan
> [  242.734796] Call trace:
> [  242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4
> [  242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c
> [  242.747689] [<ffff000008d08254>] schedule+0x40/0xa0
> [  242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c
> [  242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c
> [  242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34
> [  242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124
> [  242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8
> [  242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84
> [  242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114
> [  242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c
> [  242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360
> 
> [ ... ]
> 
> Cc: stable at vger.kernel.org
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---

Hi Xu,

gentle ping.

Thanks.

  -- Daniel

>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 470461d..1e5129b 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -774,6 +774,7 @@
>  			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
>  			clock-names = "ciu", "biu";
>  			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
> +			reset-names = "reset";
>  			bus-width = <0x8>;
>  			vmmc-supply = <&ldo19>;
>  			pinctrl-names = "default";
> @@ -797,6 +798,7 @@
>  			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
>  			clock-names = "ciu", "biu";
>  			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
> +			reset-names = "reset";
>  			vqmmc-supply = <&ldo7>;
>  			vmmc-supply = <&ldo10>;
>  			bus-width = <0x4>;
> @@ -815,6 +817,7 @@
>  			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
>  			clock-names = "ciu", "biu";
>  			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
> +			reset-names = "reset";
>  			bus-width = <0x4>;
>  			broken-cd;
>  			pinctrl-names = "default", "idle";
> -- 
> 1.9.1
> 

-- 

 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

WARNING: multiple messages have this Message-ID (diff)
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: xuwei5@hisilicon.com
Cc: guodong.xu@linaro.org, linux-arm-kernel@lists.infradead.org,
	stable@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: hi6220: Reset the mmc hosts
Date: Fri, 7 Apr 2017 15:45:09 +0200	[thread overview]
Message-ID: <20170407134509.GK2078@mai> (raw)
In-Reply-To: <1489673004-11075-1-git-send-email-daniel.lezcano@linaro.org>

On Thu, Mar 16, 2017 at 03:03:24PM +0100, Daniel Lezcano wrote:
> The MMC hosts could be left in an unconsistent or uninitialized state from
> the firmware. Instead of assuming, the firmware did the right things, let's
> reset the host controllers.
> 
> This change fixes a bug when the mmc2/sdio is initialized leading to a hung
> task:
> 
> [  242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds.
> [  242.711129]       Not tainted 4.9.0-rc8-00017-gcf0251f #3
> [  242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  242.724435] kworker/7:1     D    0   675      2 0x00000000
> [  242.729973] Workqueue: events_freezable mmc_rescan
> [  242.734796] Call trace:
> [  242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4
> [  242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c
> [  242.747689] [<ffff000008d08254>] schedule+0x40/0xa0
> [  242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c
> [  242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c
> [  242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34
> [  242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124
> [  242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8
> [  242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84
> [  242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114
> [  242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c
> [  242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360
> 
> [ ... ]
> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---

Hi Xu,

gentle ping.

Thanks.

  -- Daniel

>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 470461d..1e5129b 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -774,6 +774,7 @@
>  			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
>  			clock-names = "ciu", "biu";
>  			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
> +			reset-names = "reset";
>  			bus-width = <0x8>;
>  			vmmc-supply = <&ldo19>;
>  			pinctrl-names = "default";
> @@ -797,6 +798,7 @@
>  			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
>  			clock-names = "ciu", "biu";
>  			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
> +			reset-names = "reset";
>  			vqmmc-supply = <&ldo7>;
>  			vmmc-supply = <&ldo10>;
>  			bus-width = <0x4>;
> @@ -815,6 +817,7 @@
>  			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
>  			clock-names = "ciu", "biu";
>  			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
> +			reset-names = "reset";
>  			bus-width = <0x4>;
>  			broken-cd;
>  			pinctrl-names = "default", "idle";
> -- 
> 1.9.1
> 

-- 

 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

  reply	other threads:[~2017-04-07 13:45 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-16 14:03 [PATCH] ARM: dts: hi6220: Reset the mmc hosts Daniel Lezcano
2017-03-16 14:03 ` Daniel Lezcano
2017-03-16 14:03 ` Daniel Lezcano
2017-04-07 13:45 ` Daniel Lezcano [this message]
2017-04-07 13:45   ` Daniel Lezcano
2017-04-08  6:38 ` Wei Xu
2017-04-08  6:38   ` Wei Xu
2017-04-08  6:38   ` Wei Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170407134509.GK2078@mai \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.