From: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
Joao Pinto <Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>,
Alexandre TORGUE <alexandre.torgue-qxv4g6HH51o@public.gmane.org>,
Giuseppe CAVALLARO <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>,
Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
Cc: Niklas Cassel <niklass-VrBV9hrLPhE@public.gmane.org>,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH net-next v2] bindings: net: stmmac: add missing note about LPI interrupt
Date: Mon, 10 Apr 2017 09:43:19 +0200 [thread overview]
Message-ID: <20170410074320.9506-1-niklass@axis.com> (raw)
From: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
The hardware has a LPI interrupt.
There is already code in the stmmac driver to parse and handle the
interrupt. However, this information was missing from the DT binding.
Signed-off-by: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
---
Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index f652b0c384ce..84e4cbfd3b0f 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -8,8 +8,8 @@ Required properties:
that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- interrupt-names: Should contain the interrupt names "macirq"
- "eth_wake_irq" if this interrupt is supported in the "interrupts"
- property
+ "eth_wake_irq" if this interrupt is supported in the "interrupts" property
+ "eth_lpi" if this interrupt is supported in the "interrupts" property
- phy-mode: See ethernet.txt file in the same directory.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
@@ -152,8 +152,8 @@ Examples:
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupt-parent = <&vic1>;
- interrupts = <24 23>;
- interrupt-names = "macirq", "eth_wake_irq";
+ interrupts = <24 23 22>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
mac-address = [000000000000]; /* Filled in by U-Boot */
max-frame-size = <3800>;
phy-mode = "gmii";
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Niklas Cassel <niklas.cassel@axis.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
"David S. Miller" <davem@davemloft.net>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Niklas Cassel <niklass@axis.com>,
Alexandre TORGUE <alexandre.torgue@st.com>,
Giuseppe CAVALLARO <peppe.cavallaro@st.com>,
Thierry Reding <treding@nvidia.com>,
Eric Engestrom <eric@engestrom.ch>
Cc: Niklas Cassel <niklass@axis.com>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH net-next v2] bindings: net: stmmac: add missing note about LPI interrupt
Date: Mon, 10 Apr 2017 09:43:19 +0200 [thread overview]
Message-ID: <20170410074320.9506-1-niklass@axis.com> (raw)
From: Niklas Cassel <niklas.cassel@axis.com>
The hardware has a LPI interrupt.
There is already code in the stmmac driver to parse and handle the
interrupt. However, this information was missing from the DT binding.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index f652b0c384ce..84e4cbfd3b0f 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -8,8 +8,8 @@ Required properties:
that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- interrupt-names: Should contain the interrupt names "macirq"
- "eth_wake_irq" if this interrupt is supported in the "interrupts"
- property
+ "eth_wake_irq" if this interrupt is supported in the "interrupts" property
+ "eth_lpi" if this interrupt is supported in the "interrupts" property
- phy-mode: See ethernet.txt file in the same directory.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
@@ -152,8 +152,8 @@ Examples:
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupt-parent = <&vic1>;
- interrupts = <24 23>;
- interrupt-names = "macirq", "eth_wake_irq";
+ interrupts = <24 23 22>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
mac-address = [000000000000]; /* Filled in by U-Boot */
max-frame-size = <3800>;
phy-mode = "gmii";
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
Joao Pinto <Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>,
Niklas Cassel <niklass-VrBV9hrLPhE@public.gmane.org>,
Alexandre TORGUE <alexandre.torgue-qxv4g6HH51o@public.gmane.org>,
Giuseppe CAVALLARO <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>,
Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
Cc: Niklas Cassel <niklass-VrBV9hrLPhE@public.gmane.org>,
<netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH net-next v2] bindings: net: stmmac: add missing note about LPI interrupt
Date: Mon, 10 Apr 2017 09:43:19 +0200 [thread overview]
Message-ID: <20170410074320.9506-1-niklass@axis.com> (raw)
From: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
The hardware has a LPI interrupt.
There is already code in the stmmac driver to parse and handle the
interrupt. However, this information was missing from the DT binding.
Signed-off-by: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
---
Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index f652b0c384ce..84e4cbfd3b0f 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -8,8 +8,8 @@ Required properties:
that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- interrupt-names: Should contain the interrupt names "macirq"
- "eth_wake_irq" if this interrupt is supported in the "interrupts"
- property
+ "eth_wake_irq" if this interrupt is supported in the "interrupts" property
+ "eth_lpi" if this interrupt is supported in the "interrupts" property
- phy-mode: See ethernet.txt file in the same directory.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
@@ -152,8 +152,8 @@ Examples:
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupt-parent = <&vic1>;
- interrupts = <24 23>;
- interrupt-names = "macirq", "eth_wake_irq";
+ interrupts = <24 23 22>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
mac-address = [000000000000]; /* Filled in by U-Boot */
max-frame-size = <3800>;
phy-mode = "gmii";
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-04-10 7:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-10 7:43 Niklas Cassel [this message]
2017-04-10 7:43 ` [PATCH net-next v2] bindings: net: stmmac: add missing note about LPI interrupt Niklas Cassel
2017-04-10 7:43 ` Niklas Cassel
2017-04-11 6:08 ` Giuseppe CAVALLARO
2017-04-11 6:08 ` Giuseppe CAVALLARO
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170410074320.9506-1-niklass@axis.com \
--to=niklas.cassel-vrbv9hrlphe@public.gmane.org \
--cc=Joao.Pinto-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=alexandre.torgue-qxv4g6HH51o@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=niklass-VrBV9hrLPhE@public.gmane.org \
--cc=peppe.cavallaro-qxv4g6HH51o@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.