[PATCH 4.4 00/32] 4.4.61-stable review

[PATCH 4.4 00/32] 4.4.61-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.61 release.
There are 32 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Apr 12 16:38:14 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.61-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.61-rc1

Chris Salls <salls@cs.ucsb.edu>
    mm/mempolicy.c: fix error handling in set_mempolicy and mbind.

Huacai Chen <chenhc@lemote.com>
    MIPS: Flush wrong invalid FTLB entry for huge page

Hauke Mehrtens <hauke@hauke-m.de>
    MIPS: Lantiq: fix missing xbar kernel panic

Paul Burton <paul.burton@imgtec.com>
    MIPS: End spinlocks with .insn

John Crispin <john@phrozen.org>
    MIPS: ralink: Fix typos in rt3883 pinctrl

James Hogan <james.hogan@imgtec.com>
    MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

Heiko Carstens <heiko.carstens@de.ibm.com>
    s390/uaccess: get_user() should zero on failure (again)

Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
    s390/decompressor: fix initrd corruption caused by bss clear

Tobias Klauser <tklauser@distanz.ch>
    nios2: reserve boot memory for device tree

Paul Mackerras <paulus@ozlabs.org>
    powerpc: Don't try to fix up misaligned load-with-reservation instructions

Frederic Barrat <fbarrat@linux.vnet.ibm.com>
    powerpc/mm: Add missing global TLB invalidate if cxl is active

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Add missing fixups

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Fix src fixup in from user rapf loops

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Set flags before ADDZ

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Zero rest of buffer from copy_from_user

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Add early abort to copy_to_user

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Fix alignment error checking

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Drop unused macros

Wei Yongjun <yongjun_wei@trendmicro.com.cn>
    ring-buffer: Fix return value check in test_ringbuffer()

bsegall@google.com <bsegall@google.com>
    ptrace: fix PTRACE_LISTEN race corrupting task->state

Jan-Marek Glogowski <glogow@fbihome.de>
    Reset TreeId to zero on SMB2 TREE_CONNECT

Quentin Schulz <quentin.schulz@free-electrons.com>
    iio: bmg160: reset chip when probing

Marc Zyngier <marc.zyngier@arm.com>
    arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region

Marc Zyngier <marc.zyngier@arm.com>
    arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

Shuxiao Zhang <zhangshuxiao@xiaomi.com>
    staging: android: ashmem: lseek failed due to no FMODE_LSEEK.

NeilBrown <neilb@suse.com>
    sysfs: be careful of error returns from ops->show()

Li Qiang <liq3ea@gmail.com>
    drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Remove getparam error message

Thomas Hellstrom <thellstrom@vmware.com>
    drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces

Murray McAllister <murray.mcallister@insomniasec.com>
    drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()

Murray McAllister <murray.mcallister@insomniasec.com>
    drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Type-check lookups of fence objects


-------------

Diffstat:

 Makefile                                 |   4 +-
 arch/arm/kvm/mmu.c                       |  13 +-
 arch/metag/include/asm/uaccess.h         |  15 +-
 arch/metag/lib/usercopy.c                | 312 ++++++++++++-------------------
 arch/mips/Kconfig                        |   2 +-
 arch/mips/include/asm/spinlock.h         |   8 +-
 arch/mips/lantiq/xway/sysctrl.c          |   2 +-
 arch/mips/mm/tlbex.c                     |  25 ++-
 arch/mips/ralink/rt3883.c                |   4 +-
 arch/nios2/kernel/prom.c                 |   7 +
 arch/nios2/kernel/setup.c                |   3 +
 arch/powerpc/kernel/align.c              |  27 ++-
 arch/powerpc/mm/hash_native_64.c         |   7 +-
 arch/s390/boot/compressed/misc.c         |  35 ++--
 arch/s390/include/asm/uaccess.h          |   2 +-
 drivers/gpu/drm/ttm/ttm_object.c         |  10 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c    |  79 +++++---
 drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c    |   4 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c |   4 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c  |  31 ++-
 drivers/iio/gyro/bmg160_core.c           |  12 ++
 drivers/staging/android/ashmem.c         |   1 +
 fs/cifs/smb2pdu.c                        |   4 +
 fs/sysfs/file.c                          |   6 +-
 include/drm/ttm/ttm_object.h             |   5 +-
 kernel/ptrace.c                          |  14 +-
 kernel/trace/ring_buffer.c               |   8 +-
 mm/mempolicy.c                           |  20 +-
 28 files changed, 345 insertions(+), 319 deletions(-)

[PATCH 4.4 01/32] drm/vmwgfx: Type-check lookups of fence objects

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit f7652afa8eadb416b23eb57dec6f158529942041 upstream.

A malicious caller could otherwise hand over handles to other objects
causing all sorts of interesting problems.

Testing done: Ran a Fedora 25 desktop using both Xorg and
gnome-shell/Wayland.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c |   75 ++++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 26 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -539,7 +539,7 @@ int vmw_fence_create(struct vmw_fence_ma
 		     struct vmw_fence_obj **p_fence)
 {
 	struct vmw_fence_obj *fence;
-	int ret;
+ 	int ret;
 
 	fence = kzalloc(sizeof(*fence), GFP_KERNEL);
 	if (unlikely(fence == NULL))
@@ -702,6 +702,41 @@ void vmw_fence_fifo_up(struct vmw_fence_
 }
 
 
+/**
+ * vmw_fence_obj_lookup - Look up a user-space fence object
+ *
+ * @tfile: A struct ttm_object_file identifying the caller.
+ * @handle: A handle identifying the fence object.
+ * @return: A struct vmw_user_fence base ttm object on success or
+ * an error pointer on failure.
+ *
+ * The fence object is looked up and type-checked. The caller needs
+ * to have opened the fence object first, but since that happens on
+ * creation and fence objects aren't shareable, that's not an
+ * issue currently.
+ */
+static struct ttm_base_object *
+vmw_fence_obj_lookup(struct ttm_object_file *tfile, u32 handle)
+{
+	struct ttm_base_object *base = ttm_base_object_lookup(tfile, handle);
+
+	if (!base) {
+		pr_err("Invalid fence object handle 0x%08lx.\n",
+		       (unsigned long)handle);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (base->refcount_release != vmw_user_fence_base_release) {
+		pr_err("Invalid fence object handle 0x%08lx.\n",
+		       (unsigned long)handle);
+		ttm_base_object_unref(&base);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return base;
+}
+
+
 int vmw_fence_obj_wait_ioctl(struct drm_device *dev, void *data,
 			     struct drm_file *file_priv)
 {
@@ -727,13 +762,9 @@ int vmw_fence_obj_wait_ioctl(struct drm_
 		arg->kernel_cookie = jiffies + wait_timeout;
 	}
 
-	base = ttm_base_object_lookup(tfile, arg->handle);
-	if (unlikely(base == NULL)) {
-		printk(KERN_ERR "Wait invalid fence object handle "
-		       "0x%08lx.\n",
-		       (unsigned long)arg->handle);
-		return -EINVAL;
-	}
+	base = vmw_fence_obj_lookup(tfile, arg->handle);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	fence = &(container_of(base, struct vmw_user_fence, base)->fence);
 
@@ -772,13 +803,9 @@ int vmw_fence_obj_signaled_ioctl(struct
 	struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
 	struct vmw_private *dev_priv = vmw_priv(dev);
 
-	base = ttm_base_object_lookup(tfile, arg->handle);
-	if (unlikely(base == NULL)) {
-		printk(KERN_ERR "Fence signaled invalid fence object handle "
-		       "0x%08lx.\n",
-		       (unsigned long)arg->handle);
-		return -EINVAL;
-	}
+	base = vmw_fence_obj_lookup(tfile, arg->handle);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	fence = &(container_of(base, struct vmw_user_fence, base)->fence);
 	fman = fman_from_fence(fence);
@@ -1093,6 +1120,7 @@ int vmw_fence_event_ioctl(struct drm_dev
 		(struct drm_vmw_fence_event_arg *) data;
 	struct vmw_fence_obj *fence = NULL;
 	struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
+	struct ttm_object_file *tfile = vmw_fp->tfile;
 	struct drm_vmw_fence_rep __user *user_fence_rep =
 		(struct drm_vmw_fence_rep __user *)(unsigned long)
 		arg->fence_rep;
@@ -1106,15 +1134,11 @@ int vmw_fence_event_ioctl(struct drm_dev
 	 */
 	if (arg->handle) {
 		struct ttm_base_object *base =
-			ttm_base_object_lookup_for_ref(dev_priv->tdev,
-						       arg->handle);
+			vmw_fence_obj_lookup(tfile, arg->handle);
+
+		if (IS_ERR(base))
+			return PTR_ERR(base);
 
-		if (unlikely(base == NULL)) {
-			DRM_ERROR("Fence event invalid fence object handle "
-				  "0x%08lx.\n",
-				  (unsigned long)arg->handle);
-			return -EINVAL;
-		}
 		fence = &(container_of(base, struct vmw_user_fence,
 				       base)->fence);
 		(void) vmw_fence_obj_reference(fence);
@@ -1122,7 +1146,7 @@ int vmw_fence_event_ioctl(struct drm_dev
 		if (user_fence_rep != NULL) {
 			bool existed;
 
-			ret = ttm_ref_object_add(vmw_fp->tfile, base,
+			ret = ttm_ref_object_add(tfile, base,
 						 TTM_REF_USAGE, &existed);
 			if (unlikely(ret != 0)) {
 				DRM_ERROR("Failed to reference a fence "
@@ -1166,8 +1190,7 @@ int vmw_fence_event_ioctl(struct drm_dev
 	return 0;
 out_no_create:
 	if (user_fence_rep != NULL)
-		ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
-					  handle, TTM_REF_USAGE);
+		ttm_ref_object_base_unref(tfile, handle, TTM_REF_USAGE);
 out_no_ref_obj:
 	vmw_fence_obj_unreference(&fence);
 	return ret;

[PATCH 4.4 02/32] drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murray McAllister <murray.mcallister@insomniasec.com>

commit 36274ab8c596f1240c606bb514da329add2a1bcd upstream.

Before memory allocations vmw_surface_define_ioctl() checks the
upper-bounds of a user-supplied size, but does not check if the
supplied size is 0.

Add check to avoid NULL pointer dereferences.

Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -718,8 +718,8 @@ int vmw_surface_define_ioctl(struct drm_
 	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
 		num_sizes += req->mip_levels[i];
 
-	if (num_sizes > DRM_VMW_MAX_SURFACE_FACES *
-	    DRM_VMW_MAX_MIP_LEVELS)
+	if (num_sizes > DRM_VMW_MAX_SURFACE_FACES * DRM_VMW_MAX_MIP_LEVELS ||
+	    num_sizes == 0)
 		return -EINVAL;
 
 	size = vmw_user_surface_size + 128 +

[PATCH 4.4 03/32] drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murray McAllister <murray.mcallister@insomniasec.com>

commit 63774069d9527a1aeaa4aa20e929ef5e8e9ecc38 upstream.

In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is
used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()),
which can leak useful addresses to dmesg.

Add check to avoid a size of 0.

Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -186,7 +186,7 @@ int vmw_get_cap_3d_ioctl(struct drm_devi
 	bool gb_objects = !!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS);
 	struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
 
-	if (unlikely(arg->pad64 != 0)) {
+	if (unlikely(arg->pad64 != 0 || arg->max_size == 0)) {
 		DRM_ERROR("Illegal GET_3D_CAP argument.\n");
 		return -EINVAL;
 	}

[PATCH 4.4 04/32] drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit fe25deb7737ce6c0879ccf79c99fa1221d428bf2 upstream.

Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.

This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/ttm/ttm_object.c         |   10 +++++++---
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c    |    6 ++----
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c |    4 ++--
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c  |   22 +++++++++-------------
 include/drm/ttm/ttm_object.h             |    5 ++++-
 5 files changed, 24 insertions(+), 23 deletions(-)

--- a/drivers/gpu/drm/ttm/ttm_object.c
+++ b/drivers/gpu/drm/ttm/ttm_object.c
@@ -179,7 +179,7 @@ int ttm_base_object_init(struct ttm_obje
 	if (unlikely(ret != 0))
 		goto out_err0;
 
-	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL, false);
 	if (unlikely(ret != 0))
 		goto out_err1;
 
@@ -318,7 +318,8 @@ EXPORT_SYMBOL(ttm_ref_object_exists);
 
 int ttm_ref_object_add(struct ttm_object_file *tfile,
 		       struct ttm_base_object *base,
-		       enum ttm_ref_type ref_type, bool *existed)
+		       enum ttm_ref_type ref_type, bool *existed,
+		       bool require_existed)
 {
 	struct drm_open_hash *ht = &tfile->ref_hash[ref_type];
 	struct ttm_ref_object *ref;
@@ -345,6 +346,9 @@ int ttm_ref_object_add(struct ttm_object
 		}
 
 		rcu_read_unlock();
+		if (require_existed)
+			return -EPERM;
+
 		ret = ttm_mem_global_alloc(mem_glob, sizeof(*ref),
 					   false, false);
 		if (unlikely(ret != 0))
@@ -635,7 +639,7 @@ int ttm_prime_fd_to_handle(struct ttm_ob
 	prime = (struct ttm_prime_object *) dma_buf->priv;
 	base = &prime->base;
 	*handle = base->hash.key;
-	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL, false);
 
 	dma_buf_put(dma_buf);
 
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -1144,10 +1144,8 @@ int vmw_fence_event_ioctl(struct drm_dev
 		(void) vmw_fence_obj_reference(fence);
 
 		if (user_fence_rep != NULL) {
-			bool existed;
-
-			ret = ttm_ref_object_add(tfile, base,
-						 TTM_REF_USAGE, &existed);
+			ret = ttm_ref_object_add(vmw_fp->tfile, base,
+						 TTM_REF_USAGE, NULL, false);
 			if (unlikely(ret != 0)) {
 				DRM_ERROR("Failed to reference a fence "
 					  "object.\n");
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -591,7 +591,7 @@ static int vmw_user_dmabuf_synccpu_grab(
 		return ret;
 
 	ret = ttm_ref_object_add(tfile, &user_bo->prime.base,
-				 TTM_REF_SYNCCPU_WRITE, &existed);
+				 TTM_REF_SYNCCPU_WRITE, &existed, false);
 	if (ret != 0 || existed)
 		ttm_bo_synccpu_write_release(&user_bo->dma.base);
 
@@ -775,7 +775,7 @@ int vmw_user_dmabuf_reference(struct ttm
 
 	*handle = user_bo->prime.base.hash.key;
 	return ttm_ref_object_add(tfile, &user_bo->prime.base,
-				  TTM_REF_USAGE, NULL);
+				  TTM_REF_USAGE, NULL, false);
 }
 
 /*
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -904,17 +904,16 @@ vmw_surface_handle_reference(struct vmw_
 	uint32_t handle;
 	struct ttm_base_object *base;
 	int ret;
+	bool require_exist = false;
 
 	if (handle_type == DRM_VMW_HANDLE_PRIME) {
 		ret = ttm_prime_fd_to_handle(tfile, u_handle, &handle);
 		if (unlikely(ret != 0))
 			return ret;
 	} else {
-		if (unlikely(drm_is_render_client(file_priv))) {
-			DRM_ERROR("Render client refused legacy "
-				  "surface reference.\n");
-			return -EACCES;
-		}
+		if (unlikely(drm_is_render_client(file_priv)))
+			require_exist = true;
+
 		if (ACCESS_ONCE(vmw_fpriv(file_priv)->locked_master)) {
 			DRM_ERROR("Locked master refused legacy "
 				  "surface reference.\n");
@@ -942,17 +941,14 @@ vmw_surface_handle_reference(struct vmw_
 
 		/*
 		 * Make sure the surface creator has the same
-		 * authenticating master.
+		 * authenticating master, or is already registered with us.
 		 */
 		if (drm_is_primary_client(file_priv) &&
-		    user_srf->master != file_priv->master) {
-			DRM_ERROR("Trying to reference surface outside of"
-				  " master domain.\n");
-			ret = -EACCES;
-			goto out_bad_resource;
-		}
+		    user_srf->master != file_priv->master)
+			require_exist = true;
 
-		ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+		ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL,
+					 require_exist);
 		if (unlikely(ret != 0)) {
 			DRM_ERROR("Could not add a reference to a surface.\n");
 			goto out_bad_resource;
--- a/include/drm/ttm/ttm_object.h
+++ b/include/drm/ttm/ttm_object.h
@@ -229,6 +229,8 @@ extern void ttm_base_object_unref(struct
  * @ref_type: The type of reference.
  * @existed: Upon completion, indicates that an identical reference object
  * already existed, and the refcount was upped on that object instead.
+ * @require_existed: Fail with -EPERM if an identical ref object didn't
+ * already exist.
  *
  * Checks that the base object is shareable and adds a ref object to it.
  *
@@ -243,7 +245,8 @@ extern void ttm_base_object_unref(struct
  */
 extern int ttm_ref_object_add(struct ttm_object_file *tfile,
 			      struct ttm_base_object *base,
-			      enum ttm_ref_type ref_type, bool *existed);
+			      enum ttm_ref_type ref_type, bool *existed,
+			      bool require_existed);
 
 extern bool ttm_ref_object_exists(struct ttm_object_file *tfile,
 				  struct ttm_base_object *base);

[PATCH 4.4 05/32] drm/vmwgfx: Remove getparam error message

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 53e16798b0864464c5444a204e1bb93ae246c429 upstream.

The mesa winsys sometimes uses unimplemented parameter requests to
check for features. Remove the error message to avoid bloating the
kernel log.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -114,8 +114,6 @@ int vmw_getparam_ioctl(struct drm_device
 		param->value = dev_priv->has_dx;
 		break;
 	default:
-		DRM_ERROR("Illegal vmwgfx get param request: %d\n",
-			  param->param);
 		return -EINVAL;
 	}
 

[PATCH 4.4 06/32] drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Qiang <liq3ea@gmail.com>

commit e7e11f99564222d82f0ce84bd521e57d78a6b678 upstream.

In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the
'req->mip_levels' array. This array can be assigned any value from
the user space. As both the 'num_sizes' and the array is uint32_t,
it is easy to make 'num_sizes' overflow. The later 'mip_levels' is
used as the loop count. This can lead an oob write. Add the check of
'req->mip_levels' to avoid this.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -715,8 +715,11 @@ int vmw_surface_define_ioctl(struct drm_
 			128;
 
 	num_sizes = 0;
-	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
+	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i) {
+		if (req->mip_levels[i] > DRM_VMW_MAX_MIP_LEVELS)
+			return -EINVAL;
 		num_sizes += req->mip_levels[i];
+	}
 
 	if (num_sizes > DRM_VMW_MAX_SURFACE_FACES * DRM_VMW_MAX_MIP_LEVELS ||
 	    num_sizes == 0)

[PATCH 4.4 07/32] sysfs: be careful of error returns from ops->show()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit c8a139d001a1aab1ea8734db14b22dac9dd143b6 upstream.

ops->show() can return a negative error code.
Commit 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.

Commit 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.

This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.

I can reproduce it reliably only by putting delay like
	usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
  echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state

The bug can be triggered without the usleep.

Fixes: 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/sysfs/file.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -108,7 +108,7 @@ static ssize_t sysfs_kf_read(struct kern
 {
 	const struct sysfs_ops *ops = sysfs_file_ops(of->kn);
 	struct kobject *kobj = of->kn->parent->priv;
-	size_t len;
+	ssize_t len;
 
 	/*
 	 * If buf != of->prealloc_buf, we don't know how
@@ -117,13 +117,15 @@ static ssize_t sysfs_kf_read(struct kern
 	if (WARN_ON_ONCE(buf != of->prealloc_buf))
 		return 0;
 	len = ops->show(kobj, of->kn->priv, buf);
+	if (len < 0)
+		return len;
 	if (pos) {
 		if (len <= pos)
 			return 0;
 		len -= pos;
 		memmove(buf, buf + pos, len);
 	}
-	return min(count, len);
+	return min_t(ssize_t, count, len);
 }
 
 /* kernfs write callback for regular sysfs files */

[PATCH 4.4 08/32] staging: android: ashmem: lseek failed due to no FMODE_LSEEK.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuxiao Zhang <zhangshuxiao@xiaomi.com>

commit 97fbfef6bd597888485b653175fb846c6998b60c upstream.

vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.

Comment From Greg Hackmann:
	ashmem_llseek() passes the llseek() call through to the backing
	shmem file.  91360b02ab48 ("ashmem: use vfs_llseek()") changed
	this from directly calling the file's llseek() op into a VFS
	layer call.  This also adds a check for the FMODE_LSEEK bit, so
	without that bit ashmem_llseek() now always fails with -ESPIPE.

Fixes: 91360b02ab48 ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/android/ashmem.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -392,6 +392,7 @@ static int ashmem_mmap(struct file *file
 			ret = PTR_ERR(vmfile);
 			goto out;
 		}
+		vmfile->f_mode |= FMODE_LSEEK;
 		asma->file = vmfile;
 	}
 	get_file(asma->file);

[PATCH 4.4 09/32] arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 90f6e150e44a0dc3883110eeb3ab35d1be42b6bb upstream.

We don't hold the mmap_sem while searching for the VMAs when
we try to unmap each memslot for a VM. Fix this properly to
avoid unexpected results.

Fixes: commit 957db105c997 ("arm/arm64: KVM: Introduce stage2_unmap_vm")
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/mmu.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -796,6 +796,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 	int idx;
 
 	idx = srcu_read_lock(&kvm->srcu);
+	down_read(&current->mm->mmap_sem);
 	spin_lock(&kvm->mmu_lock);
 
 	slots = kvm_memslots(kvm);
@@ -803,6 +804,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 		stage2_unmap_memslot(kvm, memslot);
 
 	spin_unlock(&kvm->mmu_lock);
+	up_read(&current->mm->mmap_sem);
 	srcu_read_unlock(&kvm->srcu, idx);
 }
 

[PATCH 4.4 10/32] arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 72f310481a08db821b614e7b5d00febcc9064b36 upstream.

We don't hold the mmap_sem while searching for VMAs (via find_vma), in
kvm_arch_prepare_memory_region, which can end up in expected failures.

Fixes: commit 8eef91239e57 ("arm/arm64: KVM: map MMIO regions at creation time")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Auger <eric.auger@rehat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
[ Handle dirty page logging failure case ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/mmu.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -1761,6 +1761,7 @@ int kvm_arch_prepare_memory_region(struc
 	    (KVM_PHYS_SIZE >> PAGE_SHIFT))
 		return -EFAULT;
 
+	down_read(&current->mm->mmap_sem);
 	/*
 	 * A memory region could potentially cover multiple VMAs, and any holes
 	 * between them, so iterate over all of them to find out if we can map
@@ -1804,8 +1805,10 @@ int kvm_arch_prepare_memory_region(struc
 			pa += vm_start - vma->vm_start;
 
 			/* IO region dirty page logging not allowed */
-			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES)
-				return -EINVAL;
+			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES) {
+				ret = -EINVAL;
+				goto out;
+			}
 
 			ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
 						    vm_end - vm_start,
@@ -1817,7 +1820,7 @@ int kvm_arch_prepare_memory_region(struc
 	} while (hva < reg_end);
 
 	if (change == KVM_MR_FLAGS_ONLY)
-		return ret;
+		goto out;
 
 	spin_lock(&kvm->mmu_lock);
 	if (ret)
@@ -1825,6 +1828,8 @@ int kvm_arch_prepare_memory_region(struc
 	else
 		stage2_flush_memslot(kvm, memslot);
 	spin_unlock(&kvm->mmu_lock);
+out:
+	up_read(&current->mm->mmap_sem);
 	return ret;
 }
 

[PATCH 4.4 11/32] iio: bmg160: reset chip when probing

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Schulz <quentin.schulz@free-electrons.com>

commit 4bdc9029685ac03be50b320b29691766d2326c2b upstream.

The gyroscope chip might need to be reset to be used.

Without the chip being reset, the driver stopped at the first
regmap_read (to get the CHIP_ID) and failed to probe.

The datasheet of the gyroscope says that a minimum wait of 30ms after
the reset has to be done.

This patch has been checked on a BMX055 and the datasheet of the BMG160
and the BMI055 give the same reset register and bits.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/gyro/bmg160_core.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -28,6 +28,7 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/regmap.h>
+#include <linux/delay.h>
 #include "bmg160.h"
 
 #define BMG160_IRQ_NAME		"bmg160_event"
@@ -53,6 +54,9 @@
 #define BMG160_NO_FILTER		0
 #define BMG160_DEF_BW			100
 
+#define BMG160_GYRO_REG_RESET		0x14
+#define BMG160_GYRO_RESET_VAL		0xb6
+
 #define BMG160_REG_INT_MAP_0		0x17
 #define BMG160_INT_MAP_0_BIT_ANY	BIT(1)
 
@@ -186,6 +190,14 @@ static int bmg160_chip_init(struct bmg16
 	int ret;
 	unsigned int val;
 
+	/*
+	 * Reset chip to get it in a known good state. A delay of 30ms after
+	 * reset is required according to the datasheet.
+	 */
+	regmap_write(data->regmap, BMG160_GYRO_REG_RESET,
+		     BMG160_GYRO_RESET_VAL);
+	usleep_range(30000, 30700);
+
 	ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
 	if (ret < 0) {
 		dev_err(data->dev, "Error reading reg_chip_id\n");

[PATCH 4.4 12/32] Reset TreeId to zero on SMB2 TREE_CONNECT

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan-Marek Glogowski <glogow@fbihome.de>

commit 806a28efe9b78ffae5e2757e1ee924b8e50c08ab upstream.

Currently the cifs module breaks the CIFS specs on reconnect as
described in http://msdn.microsoft.com/en-us/library/cc246529.aspx:

"TreeId (4 bytes): Uniquely identifies the tree connect for the
command. This MUST be 0 for the SMB2 TREE_CONNECT Request."

Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -952,6 +952,10 @@ SMB2_tcon(const unsigned int xid, struct
 		return -EINVAL;
 	}
 
+	/* SMB2 TREE_CONNECT request must be called with TreeId == 0 */
+	if (tcon)
+		tcon->tid = 0;
+
 	rc = small_smb2_init(SMB2_TREE_CONNECT, tcon, (void **) &req);
 	if (rc) {
 		kfree(unc_path);

[PATCH 4.4 13/32] ptrace: fix PTRACE_LISTEN race corrupting task->state

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: bsegall@google.com <bsegall@google.com>

commit 5402e97af667e35e54177af8f6575518bf251d51 upstream.

In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED.  If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED.  This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.

Oleg said:
 "The kernel can crash or this can lead to other hard-to-debug problems.
  In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
  assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
  contract. Obviusly it is very wrong to manipulate task->state if this
  task is already running, or WAKING, or it sleeps again"

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com
Signed-off-by: Ben Segall <bsegall@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/ptrace.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -151,11 +151,17 @@ static void ptrace_unfreeze_traced(struc
 
 	WARN_ON(!task->ptrace || task->parent != current);
 
+	/*
+	 * PTRACE_LISTEN can allow ptrace_trap_notify to wake us up remotely.
+	 * Recheck state under the lock to close this race.
+	 */
 	spin_lock_irq(&task->sighand->siglock);
-	if (__fatal_signal_pending(task))
-		wake_up_state(task, __TASK_TRACED);
-	else
-		task->state = TASK_TRACED;
+	if (task->state == __TASK_TRACED) {
+		if (__fatal_signal_pending(task))
+			wake_up_state(task, __TASK_TRACED);
+		else
+			task->state = TASK_TRACED;
+	}
 	spin_unlock_irq(&task->sighand->siglock);
 }
 

[PATCH 4.4 14/32] ring-buffer: Fix return value check in test_ringbuffer()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

commit 62277de758b155dc04b78f195a1cb5208c37b2df upstream.

In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com

Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4875,9 +4875,9 @@ static __init int test_ringbuffer(void)
 		rb_data[cpu].cnt = cpu;
 		rb_threads[cpu] = kthread_create(rb_test, &rb_data[cpu],
 						 "rbtester/%d", cpu);
-		if (WARN_ON(!rb_threads[cpu])) {
+		if (WARN_ON(IS_ERR(rb_threads[cpu]))) {
 			pr_cont("FAILED\n");
-			ret = -1;
+			ret = PTR_ERR(rb_threads[cpu]);
 			goto out_free;
 		}
 
@@ -4887,9 +4887,9 @@ static __init int test_ringbuffer(void)
 
 	/* Now create the rb hammer! */
 	rb_hammer = kthread_run(rb_hammer_test, NULL, "rbhammer");
-	if (WARN_ON(!rb_hammer)) {
+	if (WARN_ON(IS_ERR(rb_hammer))) {
 		pr_cont("FAILED\n");
-		ret = -1;
+		ret = PTR_ERR(rb_hammer);
 		goto out_free;
 	}
 

[PATCH 4.4 15/32] metag/usercopy: Drop unused macros

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit ef62a2d81f73d9cddef14bc3d9097a57010d551c upstream.

Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger
copies between 5 and 16 bytes which are completely unused. Before fixing
zeroing lets drop these macros so there is less to fix.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |  113 ----------------------------------------------
 1 file changed, 113 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -651,119 +651,6 @@ EXPORT_SYMBOL(__copy_user);
 #define __asm_copy_from_user_4(to, from, ret) \
 	__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
 
-#define __asm_copy_from_user_5(to, from, ret) \
-	__asm_copy_from_user_4x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"4:	SETB [%0++],D1Ar1\n",		\
-		"5:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 4b,5b\n")
-
-#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_4x_cont(to, from, ret,	\
-		"	GETW D1Ar1,[%1++]\n"		\
-		"4:	SETW [%0++],D1Ar1\n" COPY,	\
-		"5:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 4b,5b\n" TENTRY)
-
-#define __asm_copy_from_user_6(to, from, ret) \
-	__asm_copy_from_user_6x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_7(to, from, ret) \
-	__asm_copy_from_user_6x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"6:	SETB [%0++],D1Ar1\n",		\
-		"7:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 6b,7b\n")
-
-#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_4x_cont(to, from, ret,	\
-		"	GETD D1Ar1,[%1++]\n"		\
-		"4:	SETD [%0++],D1Ar1\n" COPY,	\
-		"5:	ADD  %2,%2,#4\n"			\
-		"	SETD [%0++],D1Ar1\n" FIXUP,		\
-		"	.long 4b,5b\n" TENTRY)
-
-#define __asm_copy_from_user_8(to, from, ret) \
-	__asm_copy_from_user_8x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_9(to, from, ret) \
-	__asm_copy_from_user_8x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"6:	SETB [%0++],D1Ar1\n",		\
-		"7:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 6b,7b\n")
-
-#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_8x_cont(to, from, ret,	\
-		"	GETW D1Ar1,[%1++]\n"		\
-		"6:	SETW [%0++],D1Ar1\n" COPY,	\
-		"7:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 6b,7b\n" TENTRY)
-
-#define __asm_copy_from_user_10(to, from, ret) \
-	__asm_copy_from_user_10x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_11(to, from, ret)		\
-	__asm_copy_from_user_10x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"8:	SETB [%0++],D1Ar1\n",		\
-		"9:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 8b,9b\n")
-
-#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_8x_cont(to, from, ret,	\
-		"	GETD D1Ar1,[%1++]\n"		\
-		"6:	SETD [%0++],D1Ar1\n" COPY,	\
-		"7:	ADD  %2,%2,#4\n"		\
-		"	SETD [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 6b,7b\n" TENTRY)
-
-#define __asm_copy_from_user_12(to, from, ret) \
-	__asm_copy_from_user_12x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_13(to, from, ret) \
-	__asm_copy_from_user_12x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"8:	SETB [%0++],D1Ar1\n",		\
-		"9:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 8b,9b\n")
-
-#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_12x_cont(to, from, ret,	\
-		"	GETW D1Ar1,[%1++]\n"		\
-		"8:	SETW [%0++],D1Ar1\n" COPY,	\
-		"9:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 8b,9b\n" TENTRY)
-
-#define __asm_copy_from_user_14(to, from, ret) \
-	__asm_copy_from_user_14x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_15(to, from, ret) \
-	__asm_copy_from_user_14x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"10:	SETB [%0++],D1Ar1\n",		\
-		"11:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 10b,11b\n")
-
-#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_12x_cont(to, from, ret,	\
-		"	GETD D1Ar1,[%1++]\n"		\
-		"8:	SETD [%0++],D1Ar1\n" COPY,	\
-		"9:	ADD  %2,%2,#4\n"		\
-		"	SETD [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 8b,9b\n" TENTRY)
-
-#define __asm_copy_from_user_16(to, from, ret) \
-	__asm_copy_from_user_16x_cont(to, from, ret, "", "", "")
 
 #define __asm_copy_from_user_8x64(to, from, ret) \
 	asm volatile (				\

[PATCH 4.4 16/32] metag/usercopy: Fix alignment error checking

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2257211942bbbf6c798ab70b487d7e62f7835a1a upstream.

Fix the error checking of the alignment adjustment code in
raw_copy_from_user(), which mistakenly considers it safe to skip the
error check when aligning the source buffer on a 2 or 4 byte boundary.

If the destination buffer was unaligned it may have started to copy
using byte or word accesses, which could well be at the start of a new
(valid) source page. This would result in it appearing to have copied 1
or 2 bytes at the end of the first (invalid) page rather than none at
all.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -717,6 +717,8 @@ unsigned long __copy_user_zeroing(void *
 	if ((unsigned long) src & 1) {
 		__asm_copy_from_user_1(dst, src, retn);
 		n--;
+		if (retn)
+			goto copy_exception_bytes;
 	}
 	if ((unsigned long) dst & 1) {
 		/* Worst case - byte copy */
@@ -730,6 +732,8 @@ unsigned long __copy_user_zeroing(void *
 	if (((unsigned long) src & 2) && n >= 2) {
 		__asm_copy_from_user_2(dst, src, retn);
 		n -= 2;
+		if (retn)
+			goto copy_exception_bytes;
 	}
 	if ((unsigned long) dst & 2) {
 		/* Second worst case - word copy */
@@ -741,12 +745,6 @@ unsigned long __copy_user_zeroing(void *
 		}
 	}
 
-	/* We only need one check after the unalignment-adjustments,
-	   because if both adjustments were done, either both or
-	   neither reference had an exception.  */
-	if (retn != 0)
-		goto copy_exception_bytes;
-
 #ifdef USE_RAPF
 	/* 64 bit copy loop */
 	if (!(((unsigned long) src | (unsigned long) dst) & 7)) {

[PATCH 4.4 17/32] metag/usercopy: Add early abort to copy_to_user

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit fb8ea062a8f2e85256e13f55696c5c5f0dfdcc8b upstream.

When copying to userland on Meta, if any faults are encountered
immediately abort the copy instead of continuing on and repeatedly
faulting, and worse potentially copying further bytes successfully to
subsequent valid pages.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -538,23 +538,31 @@ unsigned long __copy_user(void __user *p
 	if ((unsigned long) src & 1) {
 		__asm_copy_to_user_1(dst, src, retn);
 		n--;
+		if (retn)
+			return retn + n;
 	}
 	if ((unsigned long) dst & 1) {
 		/* Worst case - byte copy */
 		while (n > 0) {
 			__asm_copy_to_user_1(dst, src, retn);
 			n--;
+			if (retn)
+				return retn + n;
 		}
 	}
 	if (((unsigned long) src & 2) && n >= 2) {
 		__asm_copy_to_user_2(dst, src, retn);
 		n -= 2;
+		if (retn)
+			return retn + n;
 	}
 	if ((unsigned long) dst & 2) {
 		/* Second worst case - word copy */
 		while (n >= 2) {
 			__asm_copy_to_user_2(dst, src, retn);
 			n -= 2;
+			if (retn)
+				return retn + n;
 		}
 	}
 
@@ -569,6 +577,8 @@ unsigned long __copy_user(void __user *p
 		while (n >= 8) {
 			__asm_copy_to_user_8x64(dst, src, retn);
 			n -= 8;
+			if (retn)
+				return retn + n;
 		}
 	}
 	if (n >= RAPF_MIN_BUF_SIZE) {
@@ -581,6 +591,8 @@ unsigned long __copy_user(void __user *p
 		while (n >= 8) {
 			__asm_copy_to_user_8x64(dst, src, retn);
 			n -= 8;
+			if (retn)
+				return retn + n;
 		}
 	}
 #endif
@@ -588,11 +600,15 @@ unsigned long __copy_user(void __user *p
 	while (n >= 16) {
 		__asm_copy_to_user_16(dst, src, retn);
 		n -= 16;
+		if (retn)
+			return retn + n;
 	}
 
 	while (n >= 4) {
 		__asm_copy_to_user_4(dst, src, retn);
 		n -= 4;
+		if (retn)
+			return retn + n;
 	}
 
 	switch (n) {
@@ -609,6 +625,10 @@ unsigned long __copy_user(void __user *p
 		break;
 	}
 
+	/*
+	 * If we get here, retn correctly reflects the number of failing
+	 * bytes.
+	 */
 	return retn;
 }
 EXPORT_SYMBOL(__copy_user);

[PATCH 4.4 18/32] metag/usercopy: Zero rest of buffer from copy_from_user

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 563ddc1076109f2b3f88e6d355eab7b6fd4662cb upstream.

Currently we try to zero the destination for a failed read from userland
in fixup code in the usercopy.c macros. The rest of the destination
buffer is then zeroed from __copy_user_zeroing(), which is used for both
copy_from_user() and __copy_from_user().

Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0
before the fixup code entry labels, and __copy_from_user() shouldn't even
be zeroing the rest of the buffer.

Move the zeroing out into copy_from_user() and rename
__copy_user_zeroing() to raw_copy_from_user() since it no longer does
any zeroing. This also conveniently matches the name needed for
RAW_COPY_USER support in a later patch.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/include/asm/uaccess.h |   15 +++++-----
 arch/metag/lib/usercopy.c        |   57 ++++++++++++---------------------------
 2 files changed, 26 insertions(+), 46 deletions(-)

--- a/arch/metag/include/asm/uaccess.h
+++ b/arch/metag/include/asm/uaccess.h
@@ -197,20 +197,21 @@ extern long __must_check strnlen_user(co
 
 #define strlen_user(str) strnlen_user(str, 32767)
 
-extern unsigned long __must_check __copy_user_zeroing(void *to,
-						      const void __user *from,
-						      unsigned long n);
+extern unsigned long raw_copy_from_user(void *to, const void __user *from,
+					unsigned long n);
 
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
+	unsigned long res = n;
 	if (likely(access_ok(VERIFY_READ, from, n)))
-		return __copy_user_zeroing(to, from, n);
-	memset(to, 0, n);
-	return n;
+		res = raw_copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
-#define __copy_from_user(to, from, n) __copy_user_zeroing(to, from, n)
+#define __copy_from_user(to, from, n) raw_copy_from_user(to, from, n)
 #define __copy_from_user_inatomic __copy_from_user
 
 extern unsigned long __must_check __copy_user(void __user *to,
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -29,7 +29,6 @@
 		COPY						 \
 		"1:\n"						 \
 		"	.section .fixup,\"ax\"\n"		 \
-		"	MOV D1Ar1,#0\n"				 \
 		FIXUP						 \
 		"	MOVT    D1Ar1,#HI(1b)\n"		 \
 		"	JUMP    D1Ar1,#LO(1b)\n"		 \
@@ -637,16 +636,14 @@ EXPORT_SYMBOL(__copy_user);
 	__asm_copy_user_cont(to, from, ret,	\
 		"	GETB D1Ar1,[%1++]\n"	\
 		"2:	SETB [%0++],D1Ar1\n",	\
-		"3:	ADD  %2,%2,#1\n"	\
-		"	SETB [%0++],D1Ar1\n",	\
+		"3:	ADD  %2,%2,#1\n",	\
 		"	.long 2b,3b\n")
 
 #define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
 	__asm_copy_user_cont(to, from, ret,		\
 		"	GETW D1Ar1,[%1++]\n"		\
 		"2:	SETW [%0++],D1Ar1\n" COPY,	\
-		"3:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
+		"3:	ADD  %2,%2,#2\n" FIXUP,		\
 		"	.long 2b,3b\n" TENTRY)
 
 #define __asm_copy_from_user_2(to, from, ret) \
@@ -656,32 +653,26 @@ EXPORT_SYMBOL(__copy_user);
 	__asm_copy_from_user_2x_cont(to, from, ret,	\
 		"	GETB D1Ar1,[%1++]\n"		\
 		"4:	SETB [%0++],D1Ar1\n",		\
-		"5:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
+		"5:	ADD  %2,%2,#1\n",		\
 		"	.long 4b,5b\n")
 
 #define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
 	__asm_copy_user_cont(to, from, ret,		\
 		"	GETD D1Ar1,[%1++]\n"		\
 		"2:	SETD [%0++],D1Ar1\n" COPY,	\
-		"3:	ADD  %2,%2,#4\n"		\
-		"	SETD [%0++],D1Ar1\n" FIXUP,	\
+		"3:	ADD  %2,%2,#4\n" FIXUP,		\
 		"	.long 2b,3b\n" TENTRY)
 
 #define __asm_copy_from_user_4(to, from, ret) \
 	__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
 
-
 #define __asm_copy_from_user_8x64(to, from, ret) \
 	asm volatile (				\
 		"	GETL D0Ar2,D1Ar1,[%1++]\n"	\
 		"2:	SETL [%0++],D0Ar2,D1Ar1\n"	\
 		"1:\n"					\
 		"	.section .fixup,\"ax\"\n"	\
-		"	MOV D1Ar1,#0\n"			\
-		"	MOV D0Ar2,#0\n"			\
 		"3:	ADD  %2,%2,#8\n"		\
-		"	SETL [%0++],D0Ar2,D1Ar1\n"	\
 		"	MOVT    D0Ar2,#HI(1b)\n"	\
 		"	JUMP    D0Ar2,#LO(1b)\n"	\
 		"	.previous\n"			\
@@ -721,11 +712,12 @@ EXPORT_SYMBOL(__copy_user);
 		"SUB	%1, %1, #4\n")
 
 
-/* Copy from user to kernel, zeroing the bytes that were inaccessible in
-   userland.  The return-value is the number of bytes that were
-   inaccessible.  */
-unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
-				  unsigned long n)
+/*
+ * Copy from user to kernel. The return-value is the number of bytes that were
+ * inaccessible.
+ */
+unsigned long raw_copy_from_user(void *pdst, const void __user *psrc,
+				 unsigned long n)
 {
 	register char *dst asm ("A0.2") = pdst;
 	register const char __user *src asm ("A1.2") = psrc;
@@ -738,7 +730,7 @@ unsigned long __copy_user_zeroing(void *
 		__asm_copy_from_user_1(dst, src, retn);
 		n--;
 		if (retn)
-			goto copy_exception_bytes;
+			return retn + n;
 	}
 	if ((unsigned long) dst & 1) {
 		/* Worst case - byte copy */
@@ -746,14 +738,14 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_1(dst, src, retn);
 			n--;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 	if (((unsigned long) src & 2) && n >= 2) {
 		__asm_copy_from_user_2(dst, src, retn);
 		n -= 2;
 		if (retn)
-			goto copy_exception_bytes;
+			return retn + n;
 	}
 	if ((unsigned long) dst & 2) {
 		/* Second worst case - word copy */
@@ -761,7 +753,7 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_2(dst, src, retn);
 			n -= 2;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 
@@ -777,7 +769,7 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_8x64(dst, src, retn);
 			n -= 8;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 
@@ -793,7 +785,7 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_8x64(dst, src, retn);
 			n -= 8;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 #endif
@@ -803,7 +795,7 @@ unsigned long __copy_user_zeroing(void *
 		n -= 4;
 
 		if (retn)
-			goto copy_exception_bytes;
+			return retn + n;
 	}
 
 	/* If we get here, there were no memory read faults.  */
@@ -829,21 +821,8 @@ unsigned long __copy_user_zeroing(void *
 	/* If we get here, retn correctly reflects the number of failing
 	   bytes.  */
 	return retn;
-
- copy_exception_bytes:
-	/* We already have "retn" bytes cleared, and need to clear the
-	   remaining "n" bytes.  A non-optimized simple byte-for-byte in-line
-	   memset is preferred here, since this isn't speed-critical code and
-	   we'd rather have this a leaf-function than calling memset.  */
-	{
-		char *endp;
-		for (endp = dst + n; dst < endp; dst++)
-			*dst = 0;
-	}
-
-	return retn + n;
 }
-EXPORT_SYMBOL(__copy_user_zeroing);
+EXPORT_SYMBOL(raw_copy_from_user);
 
 #define __asm_clear_8x64(to, ret) \
 	asm volatile (					\

[PATCH 4.4 19/32] metag/usercopy: Set flags before ADDZ

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit fd40eee1290ad7add7aa665e3ce6b0f9fe9734b4 upstream.

The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP
to decide how far to rewind the source pointer. There is a special case
for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0
even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ
which is conditional upon the Z condition flag, but the AND instruction
which masked the TXStatus.LSM_STEP field didn't set the condition flags
based on the result.

Fix that now by using ANDS which does set the flags, and also marking
the condition codes as clobbered by the inline assembly.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -315,7 +315,7 @@
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\
-		: "D1Ar1", "D0Ar2", "memory")
+		: "D1Ar1", "D0Ar2", "cc", "memory")
 
 /*	rewind 'to' and 'from'  pointers when a fault occurs
  *
@@ -341,7 +341,7 @@
 #define __asm_copy_to_user_64bit_rapf_loop(to,	from, ret, n, id)\
 	__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id,		\
 		"LSR	D0Ar2, D0Ar2, #8\n"				\
-		"AND	D0Ar2, D0Ar2, #0x7\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x7\n"				\
 		"ADDZ	D0Ar2, D0Ar2, #4\n"				\
 		"SUB	D0Ar2, D0Ar2, #1\n"				\
 		"MOV	D1Ar1, #4\n"					\
@@ -486,7 +486,7 @@
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\
-		: "D1Ar1", "D0Ar2", "memory")
+		: "D1Ar1", "D0Ar2", "cc", "memory")
 
 /*	rewind 'to' and 'from'  pointers when a fault occurs
  *
@@ -512,7 +512,7 @@
 #define __asm_copy_to_user_32bit_rapf_loop(to, from, ret, n, id)\
 	__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id,		\
 		"LSR	D0Ar2, D0Ar2, #8\n"				\
-		"AND	D0Ar2, D0Ar2, #0x7\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x7\n"				\
 		"ADDZ	D0Ar2, D0Ar2, #4\n"				\
 		"SUB	D0Ar2, D0Ar2, #1\n"				\
 		"MOV	D1Ar1, #4\n"					\

[PATCH 4.4 20/32] metag/usercopy: Fix src fixup in from user rapf loops

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2c0b1df88b987a12d95ea1d6beaf01894f3cc725 upstream.

The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.

Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -687,29 +687,49 @@ EXPORT_SYMBOL(__copy_user);
  *
  *	Rationale:
  *		A fault occurs while reading from user buffer, which is the
- *		source. Since the fault is at a single address, we only
- *		need to rewind by 8 bytes.
+ *		source.
  *		Since we don't write to kernel buffer until we read first,
  *		the kernel buffer is at the right state and needn't be
- *		corrected.
+ *		corrected, but the source must be rewound to the beginning of
+ *		the block, which is LSM_STEP*8 bytes.
+ *		LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ *		and stored in D0Ar2
+ *
+ *		NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ *			LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ *			a fault happens at the 4th write, LSM_STEP will be 0
+ *			instead of 4. The code copes with that.
  */
 #define __asm_copy_from_user_64bit_rapf_loop(to, from, ret, n, id)	\
 	__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id,		\
-		"SUB	%1, %1, #8\n")
+		"LSR	D0Ar2, D0Ar2, #5\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x38\n"				\
+		"ADDZ	D0Ar2, D0Ar2, #32\n"				\
+		"SUB	%1, %1, D0Ar2\n")
 
 /*	rewind 'from' pointer when a fault occurs
  *
  *	Rationale:
  *		A fault occurs while reading from user buffer, which is the
- *		source. Since the fault is at a single address, we only
- *		need to rewind by 4 bytes.
+ *		source.
  *		Since we don't write to kernel buffer until we read first,
  *		the kernel buffer is at the right state and needn't be
- *		corrected.
+ *		corrected, but the source must be rewound to the beginning of
+ *		the block, which is LSM_STEP*4 bytes.
+ *		LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ *		and stored in D0Ar2
+ *
+ *		NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ *			LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ *			a fault happens at the 4th write, LSM_STEP will be 0
+ *			instead of 4. The code copes with that.
  */
 #define __asm_copy_from_user_32bit_rapf_loop(to, from, ret, n, id)	\
 	__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id,		\
-		"SUB	%1, %1, #4\n")
+		"LSR	D0Ar2, D0Ar2, #6\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x1c\n"				\
+		"ADDZ	D0Ar2, D0Ar2, #16\n"				\
+		"SUB	%1, %1, D0Ar2\n")
 
 
 /*

[PATCH 4.4 21/32] metag/usercopy: Add missing fixups

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit b884a190afcecdbef34ca508ea5ee88bb7c77861 upstream.

The rapf copy loops in the Meta usercopy code is missing some extable
entries for HTP cores with unaligned access checking enabled, where
faults occur on the instruction immediately after the faulting access.

Add the fixup labels and extable entries for these cases so that corner
case user copy failures don't cause kernel crashes.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   72 ++++++++++++++++++++++++++++++----------------
 1 file changed, 48 insertions(+), 24 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -259,27 +259,31 @@
 		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
 		"22:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
-		"SUB	%3, %3, #32\n"					\
 		"23:\n"							\
-		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
+		"SUB	%3, %3, #32\n"					\
 		"24:\n"							\
+		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
+		"25:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"26:\n"							\
 		"SUB	%3, %3, #32\n"					\
 		"DCACHE	[%1+#-64], D0Ar6\n"				\
 		"BR	$Lloop"id"\n"					\
 									\
 		"MOV	RAPF, %1\n"					\
-		"25:\n"							\
+		"27:\n"							\
 		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"26:\n"							\
+		"28:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"29:\n"							\
 		"SUB	%3, %3, #32\n"					\
-		"27:\n"							\
+		"30:\n"							\
 		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"28:\n"							\
+		"31:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"32:\n"							\
 		"SUB	%0, %0, #8\n"					\
-		"29:\n"							\
+		"33:\n"							\
 		"SETL	[%0++], D0.7, D1.7\n"				\
 		"SUB	%3, %3, #32\n"					\
 		"1:"							\
@@ -311,7 +315,11 @@
 		"	.long 26b,3b\n"					\
 		"	.long 27b,3b\n"					\
 		"	.long 28b,3b\n"					\
-		"	.long 29b,4b\n"					\
+		"	.long 29b,3b\n"					\
+		"	.long 30b,3b\n"					\
+		"	.long 31b,3b\n"					\
+		"	.long 32b,3b\n"					\
+		"	.long 33b,4b\n"					\
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\
@@ -402,47 +410,55 @@
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
 		"22:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
-		"SUB	%3, %3, #16\n"					\
 		"23:\n"							\
-		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"24:\n"							\
-		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
 		"SUB	%3, %3, #16\n"					\
-		"25:\n"							\
+		"24:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"26:\n"							\
+		"25:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"26:\n"							\
 		"SUB	%3, %3, #16\n"					\
 		"27:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
 		"28:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"29:\n"							\
+		"SUB	%3, %3, #16\n"					\
+		"30:\n"							\
+		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
+		"31:\n"							\
+		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"32:\n"							\
 		"SUB	%3, %3, #16\n"					\
 		"DCACHE	[%1+#-64], D0Ar6\n"				\
 		"BR	$Lloop"id"\n"					\
 									\
 		"MOV	RAPF, %1\n"					\
-		"29:\n"							\
+		"33:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"30:\n"							\
+		"34:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"35:\n"							\
 		"SUB	%3, %3, #16\n"					\
-		"31:\n"							\
+		"36:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"32:\n"							\
+		"37:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"38:\n"							\
 		"SUB	%3, %3, #16\n"					\
-		"33:\n"							\
+		"39:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"34:\n"							\
+		"40:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"41:\n"							\
 		"SUB	%3, %3, #16\n"					\
-		"35:\n"							\
+		"42:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"36:\n"							\
+		"43:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"44:\n"							\
 		"SUB	%0, %0, #4\n"					\
-		"37:\n"							\
+		"45:\n"							\
 		"SETD	[%0++], D0.7\n"					\
 		"SUB	%3, %3, #16\n"					\
 		"1:"							\
@@ -482,7 +498,15 @@
 		"	.long 34b,3b\n"					\
 		"	.long 35b,3b\n"					\
 		"	.long 36b,3b\n"					\
-		"	.long 37b,4b\n"					\
+		"	.long 37b,3b\n"					\
+		"	.long 38b,3b\n"					\
+		"	.long 39b,3b\n"					\
+		"	.long 40b,3b\n"					\
+		"	.long 41b,3b\n"					\
+		"	.long 42b,3b\n"					\
+		"	.long 43b,3b\n"					\
+		"	.long 44b,3b\n"					\
+		"	.long 45b,4b\n"					\
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\

[PATCH 4.4 22/32] powerpc/mm: Add missing global TLB invalidate if cxl is active

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Frederic Barrat <fbarrat@linux.vnet.ibm.com>

commit 88b1bf7268f56887ca88eb09c6fb0f4fc970121a upstream.

Commit 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl") converted local
TLB invalidates to global if the cxl driver is active. This is necessary
because the CAPP snoops invalidations to forward them to the PSL on the
cxl adapter. However one path was forgotten. native_flush_hash_range()
still does local TLB invalidates, as found out the hard way recently.

This patch fixes it by following the same logic as previously: if the
cxl driver is active, the local TLB invalidates are 'upgraded' to
global.

Fixes: 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl")
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/hash_native_64.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -645,6 +645,10 @@ static void native_flush_hash_range(unsi
 	unsigned long psize = batch->psize;
 	int ssize = batch->ssize;
 	int i;
+	unsigned int use_local;
+
+	use_local = local && mmu_has_feature(MMU_FTR_TLBIEL) &&
+		mmu_psize_defs[psize].tlbiel && !cxl_ctx_in_use();
 
 	local_irq_save(flags);
 
@@ -671,8 +675,7 @@ static void native_flush_hash_range(unsi
 		} pte_iterate_hashed_end();
 	}
 
-	if (mmu_has_feature(MMU_FTR_TLBIEL) &&
-	    mmu_psize_defs[psize].tlbiel && local) {
+	if (use_local) {
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
 			vpn = batch->vpn[i];

[PATCH 4.4 23/32] powerpc: Dont try to fix up misaligned load-with-reservation instructions

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@ozlabs.org>

commit 48fe9e9488743eec9b7c1addd3c93f12f2123d54 upstream.

In the past, there was only one load-with-reservation instruction,
lwarx, and if a program attempted a lwarx on a misaligned address, it
would take an alignment interrupt and the kernel handler would emulate
it as though it was lwzx, which was not really correct, but benign since
it is loading the right amount of data, and the lwarx should be paired
with a stwcx. to the same address, which would also cause an alignment
interrupt which would result in a SIGBUS being delivered to the process.

We now have 5 different sizes of load-with-reservation instruction. Of
those, lharx and ldarx cause an immediate SIGBUS by luck since their
entries in aligninfo[] overlap instructions which were not fixed up, but
lqarx overlaps with lhz and will be emulated as such. lbarx can never
generate an alignment interrupt since it only operates on 1 byte.

To straighten this out and fix the lqarx case, this adds code to detect
the l[hwdq]arx instructions and return without fixing them up, resulting
in a SIGBUS being delivered to the process.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/align.c |   27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -808,14 +808,25 @@ int fix_alignment(struct pt_regs *regs)
 	nb = aligninfo[instr].len;
 	flags = aligninfo[instr].flags;
 
-	/* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
-	if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
-		nb = 8;
-		flags = LD+SW;
-	} else if (IS_XFORM(instruction) &&
-		   ((instruction >> 1) & 0x3ff) == 660) {
-		nb = 8;
-		flags = ST+SW;
+	/*
+	 * Handle some cases which give overlaps in the DSISR values.
+	 */
+	if (IS_XFORM(instruction)) {
+		switch (get_xop(instruction)) {
+		case 532:	/* ldbrx */
+			nb = 8;
+			flags = LD+SW;
+			break;
+		case 660:	/* stdbrx */
+			nb = 8;
+			flags = ST+SW;
+			break;
+		case 20:	/* lwarx */
+		case 84:	/* ldarx */
+		case 116:	/* lharx */
+		case 276:	/* lqarx */
+			return 0;	/* not emulated ever */
+		}
 	}
 
 	/* Byteswap little endian loads and stores */

[PATCH 4.4 24/32] nios2: reserve boot memory for device tree

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Klauser <tklauser@distanz.ch>

commit 921d701e6f31e1ffaca3560416af1aa04edb4c4f upstream.

Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:

  bootconsole [early0] enabled
  Early console on uart16650 initialized at 0xf8001600
  OF: fdt: Error -11 processing FDT
  Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

  ---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

Guenter Roeck says:

> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/nios2/kernel/prom.c  |    7 +++++++
 arch/nios2/kernel/setup.c |    3 +++
 2 files changed, 10 insertions(+)

--- a/arch/nios2/kernel/prom.c
+++ b/arch/nios2/kernel/prom.c
@@ -48,6 +48,13 @@ void * __init early_init_dt_alloc_memory
 	return alloc_bootmem_align(size, align);
 }
 
+int __init early_init_dt_reserve_memory_arch(phys_addr_t base, phys_addr_t size,
+					     bool nomap)
+{
+	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+	return 0;
+}
+
 void __init early_init_devtree(void *params)
 {
 	__be32 *dtb = (u32 *)__dtb_start;
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -195,6 +195,9 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+
 	unflatten_and_copy_device_tree();
 
 	setup_cpuinfo();

[PATCH 4.4 25/32] s390/decompressor: fix initrd corruption caused by bss clear

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>

commit d82c0d12c92705ef468683c9b7a8298dd61ed191 upstream.

Reorder the operations in decompress_kernel() to ensure initrd is moved
to a safe location before the bss section is zeroed.

During decompression bss can overlap with the initrd and this can
corrupt the initrd contents depending on the size of the compressed
kernel (which affects where the initrd is placed by the bootloader) and
the size of the bss section of the decompressor.

Also use the correct initrd size when checking for overlaps with
parmblock.

Fixes: 06c0dd72aea3 ([S390] fix boot failures with compressed kernels)
Reviewed-by: Joy Latten <joy.latten@canonical.com>
Reviewed-by: Vineetha HariPai <vineetha.hari.pai@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/boot/compressed/misc.c |   35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -141,31 +141,34 @@ static void check_ipl_parmblock(void *st
 
 unsigned long decompress_kernel(void)
 {
-	unsigned long output_addr;
-	unsigned char *output;
+	void *output, *kernel_end;
 
-	output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
-	check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
-	memset(&_bss, 0, &_ebss - &_bss);
-	free_mem_ptr = (unsigned long)&_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-	output = (unsigned char *) output_addr;
+	output = (void *) ALIGN((unsigned long) &_end + HEAP_SIZE, PAGE_SIZE);
+	kernel_end = output + SZ__bss_start;
+	check_ipl_parmblock((void *) 0, (unsigned long) kernel_end);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
 	 * Move the initrd right behind the end of the decompressed
-	 * kernel image.
+	 * kernel image. This also prevents initrd corruption caused by
+	 * bss clearing since kernel_end will always be located behind the
+	 * current bss section..
 	 */
-	if (INITRD_START && INITRD_SIZE &&
-	    INITRD_START < (unsigned long) output + SZ__bss_start) {
-		check_ipl_parmblock(output + SZ__bss_start,
-				    INITRD_START + INITRD_SIZE);
-		memmove(output + SZ__bss_start,
-			(void *) INITRD_START, INITRD_SIZE);
-		INITRD_START = (unsigned long) output + SZ__bss_start;
+	if (INITRD_START && INITRD_SIZE && kernel_end > (void *) INITRD_START) {
+		check_ipl_parmblock(kernel_end, INITRD_SIZE);
+		memmove(kernel_end, (void *) INITRD_START, INITRD_SIZE);
+		INITRD_START = (unsigned long) kernel_end;
 	}
 #endif
 
+	/*
+	 * Clear bss section. free_mem_ptr and free_mem_end_ptr need to be
+	 * initialized afterwards since they reside in bss.
+	 */
+	memset(&_bss, 0, &_ebss - &_bss);
+	free_mem_ptr = (unsigned long) &_end;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
 	puts("Uncompressing Linux... ");
 	__decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
 	puts("Ok, booting the kernel.\n");

[PATCH 4.4 26/32] s390/uaccess: get_user() should zero on failure (again)

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit d09c5373e8e4eaaa09233552cbf75dc4c4f21203 upstream.

Commit fd2d2b191fe7 ("s390: get_user() should zero on failure")
intended to fix s390's get_user() implementation which did not zero
the target operand if the read from user space faulted. Unfortunately
the patch has no effect: the corresponding inline assembly specifies
that the operand is only written to ("=") and the previous value is
discarded.

Therefore the compiler is free to and actually does omit the zero
initialization.

To fix this simply change the contraint modifier to "+", so the
compiler cannot omit the initialization anymore.

Fixes: c9ca78415ac1 ("s390/uaccess: provide inline variants of get_user/put_user")
Fixes: fd2d2b191fe7 ("s390: get_user() should zero on failure")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/include/asm/uaccess.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -150,7 +150,7 @@ unsigned long __must_check __copy_to_use
 		"	jg	2b\n"				\
 		".popsection\n"					\
 		EX_TABLE(0b,3b) EX_TABLE(1b,3b)			\
-		: "=d" (__rc), "=Q" (*(to))			\
+		: "=d" (__rc), "+Q" (*(to))			\
 		: "d" (size), "Q" (*(from)),			\
 		  "d" (__reg0), "K" (-EFAULT)			\
 		: "cc");					\

[PATCH 4.4 27/32] MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2e6c7747730296a6d4fd700894286db1132598c4 upstream.

When a 32-bit kernel is configured to support MIPS64r6 (CPU_MIPS64_R6),
MIPS_O32_FP64_SUPPORT won't be selected as it should be because
MIPS32_O32 is disabled (o32 is already the default ABI available on
32-bit kernels).

This results in userland FP breakage as CP0_Status.FR is read-only 1
since r6 (when an FPU is present) so __enable_fpu() will fail to clear
FR. This causes the FPU emulator to get used which will incorrectly
emulate 32-bit FPU registers.

Force o32 fp64 support in this case by also selecting
MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT.

Fixes: 4e9d324d4288 ("MIPS: Require O32 FP64 support for MIPS64 with O32 compat")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15310/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1412,7 +1412,7 @@ config CPU_MIPS32_R6
 	select CPU_SUPPORTS_MSA
 	select GENERIC_CSUM
 	select HAVE_KVM
-	select MIPS_O32_FP64_SUPPORT
+	select MIPS_O32_FP64_SUPPORT if 32BIT
 	help
 	  Choose this option to build a kernel for release 6 or later of the
 	  MIPS32 architecture.  New MIPS processors, starting with the Warrior

Re: [PATCH 4.4 27/32] MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

[Maciej W. Rozycki]

On Mon, 10 Apr 2017, Greg Kroah-Hartman wrote:

> Force o32 fp64 support in this case by also selecting
> MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT.
[...]
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -1412,7 +1412,7 @@ config CPU_MIPS32_R6
>  	select CPU_SUPPORTS_MSA
>  	select GENERIC_CSUM
>  	select HAVE_KVM
> -	select MIPS_O32_FP64_SUPPORT
> +	select MIPS_O32_FP64_SUPPORT if 32BIT
>  	help
>  	  Choose this option to build a kernel for release 6 or later of the
>  	  MIPS32 architecture.  New MIPS processors, starting with the Warrior

 Has the patch been misapplied?  Its description refers to CPU_MIPS64_R6, 
however the hunk heading in the diff itself indicates CPU_MIPS32_R6.

  Maciej

Re: [PATCH 4.4 27/32] MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

[Greg Kroah-Hartman]

On Sat, Apr 15, 2017 at 12:45:42AM +0100, Maciej W. Rozycki wrote:
> On Mon, 10 Apr 2017, Greg Kroah-Hartman wrote:
> 
> > Force o32 fp64 support in this case by also selecting
> > MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT.
> [...]
> > --- a/arch/mips/Kconfig
> > +++ b/arch/mips/Kconfig
> > @@ -1412,7 +1412,7 @@ config CPU_MIPS32_R6
> >  	select CPU_SUPPORTS_MSA
> >  	select GENERIC_CSUM
> >  	select HAVE_KVM
> > -	select MIPS_O32_FP64_SUPPORT
> > +	select MIPS_O32_FP64_SUPPORT if 32BIT
> >  	help
> >  	  Choose this option to build a kernel for release 6 or later of the
> >  	  MIPS32 architecture.  New MIPS processors, starting with the Warrior
> 
>  Has the patch been misapplied?  Its description refers to CPU_MIPS64_R6, 
> however the hunk heading in the diff itself indicates CPU_MIPS32_R6.

Ugh, you are right, I think I had to apply this one by hand, and got it
really wrong.  I'll go fix it up now, many thanks for pointing it out.

greg k-h

[PATCH 4.4 28/32] MIPS: ralink: Fix typos in rt3883 pinctrl

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Crispin <john@phrozen.org>

commit 7c5a3d813050ee235817b0220dd8c42359a9efd8 upstream.

There are two copy & paste errors in the definition of the 5GHz LNA and
second ethernet pinmux.

Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15328/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ralink/rt3883.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_f
 static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
 static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
 static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
 static struct rt2880_pmx_func pci_func[] = {
 	FUNC("pci-dev", 0, 40, 32),
 	FUNC("pci-host2", 1, 40, 32),
@@ -44,7 +44,7 @@ static struct rt2880_pmx_func pci_func[]
 	FUNC("pci-fnc", 3, 40, 32)
 };
 static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
 
 static struct rt2880_pmx_group rt3883_pinmux_data[] = {
 	GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),

[PATCH 4.4 29/32] MIPS: End spinlocks with .insn

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>

commit 4b5347a24a0f2d3272032c120664b484478455de upstream.

When building for microMIPS we need to ensure that the assembler always
knows that there is code at the target of a branch or jump. Recent
toolchains will fail to link a microMIPS kernel when this isn't the case
due to what it thinks is a branch to non-microMIPS code.

mips-mti-linux-gnu-ld kernel/built-in.o: .spinlock.text+0x2fc: Unsupported branch between ISA modes.
mips-mti-linux-gnu-ld final link failed: Bad value

This is due to inline assembly labels in spinlock.h not being followed
by an instruction mnemonic, either due to a .subsection pseudo-op or the
end of the inline asm block.

Fix this with a .insn direction after such labels.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15325/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/spinlock.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -112,7 +112,7 @@ static inline void arch_spin_lock(arch_s
 		"	andi	%[ticket], %[ticket], 0xffff		\n"
 		"	bne	%[ticket], %[my_ticket], 4f		\n"
 		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
-		"2:							\n"
+		"2:	.insn						\n"
 		"	.subsection 2					\n"
 		"4:	andi	%[ticket], %[ticket], 0xffff		\n"
 		"	sll	%[ticket], 5				\n"
@@ -187,7 +187,7 @@ static inline unsigned int arch_spin_try
 		"	sc	%[ticket], %[ticket_ptr]		\n"
 		"	beqz	%[ticket], 1b				\n"
 		"	 li	%[ticket], 1				\n"
-		"2:							\n"
+		"2:	.insn						\n"
 		"	.subsection 2					\n"
 		"3:	b	2b					\n"
 		"	 li	%[ticket], 0				\n"
@@ -367,7 +367,7 @@ static inline int arch_read_trylock(arch
 		"	.set	reorder					\n"
 		__WEAK_LLSC_MB
 		"	li	%2, 1					\n"
-		"2:							\n"
+		"2:	.insn						\n"
 		: "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
 		: GCC_OFF_SMALL_ASM() (rw->lock)
 		: "memory");
@@ -407,7 +407,7 @@ static inline int arch_write_trylock(arc
 			"	lui	%1, 0x8000			\n"
 			"	sc	%1, %0				\n"
 			"	li	%2, 1				\n"
-			"2:						\n"
+			"2:	.insn					\n"
 			: "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp),
 			  "=&r" (ret)
 			: GCC_OFF_SMALL_ASM() (rw->lock)

[PATCH 4.4 30/32] MIPS: Lantiq: fix missing xbar kernel panic

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hauke Mehrtens <hauke@hauke-m.de>

commit 6ef90877eee63a0d03e83183bb44b64229b624e6 upstream.

Commit 08b3c894e565 ("MIPS: lantiq: Disable xbar fpi burst mode")
accidentally requested the resources from the pmu address region
instead of the xbar registers region, but the check for the return
value of request_mem_region() was wrong. Commit 98ea51cb0c8c ("MIPS:
Lantiq: Fix another request_mem_region() return code check") fixed the
check of the return value of request_mem_region() which made the kernel
panics.
This patch now makes use of the correct memory region for the cross bar.

Fixes: 08b3c894e565 ("MIPS: lantiq: Disable xbar fpi burst mode")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
Cc: james.hogan@imgtec.com
Cc: arnd@arndb.de
Cc: sergei.shtylyov@cogentembedded.com
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15751
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/lantiq/xway/sysctrl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -467,7 +467,7 @@ void __init ltq_soc_init(void)
 
 		if (!np_xbar)
 			panic("Failed to load xbar nodes from devicetree");
-		if (of_address_to_resource(np_pmu, 0, &res_xbar))
+		if (of_address_to_resource(np_xbar, 0, &res_xbar))
 			panic("Failed to get xbar resources");
 		if (request_mem_region(res_xbar.start, resource_size(&res_xbar),
 			res_xbar.name) < 0)

[PATCH 4.4 31/32] MIPS: Flush wrong invalid FTLB entry for huge page

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 0115f6cbf26663c86496bc56eeea293f85b77897 upstream.

On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is
usually configured the same as PAGE_SIZE. In such a case, Huge page
entry is not suitable to write in FTLB.

Unfortunately, when a huge page is created, its page table entries
haven't created immediately. Then the TLB refill handler will fetch an
invalid page table entry which has no "HUGE" bit, and this entry may be
written to FTLB. Since it is invalid, TLB load/store handler will then
use tlbwi to write the valid entry at the same place. However, the
valid entry is a huge page entry which isn't suitable for FTLB.

Our solution is to modify build_huge_handler_tail. Flush the invalid
old entry (whether it is in FTLB or VTLB, this is in order to reduce
branches) and use tlbwr to write the valid new entry.

Signed-off-by: Rui Wang <wangr@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15754/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -757,7 +757,8 @@ static void build_huge_update_entries(u3
 static void build_huge_handler_tail(u32 **p, struct uasm_reloc **r,
 				    struct uasm_label **l,
 				    unsigned int pte,
-				    unsigned int ptr)
+				    unsigned int ptr,
+				    unsigned int flush)
 {
 #ifdef CONFIG_SMP
 	UASM_i_SC(p, pte, 0, ptr);
@@ -766,6 +767,22 @@ static void build_huge_handler_tail(u32
 #else
 	UASM_i_SW(p, pte, 0, ptr);
 #endif
+	if (cpu_has_ftlb && flush) {
+		BUG_ON(!cpu_has_tlbinv);
+
+		UASM_i_MFC0(p, ptr, C0_ENTRYHI);
+		uasm_i_ori(p, ptr, ptr, MIPS_ENTRYHI_EHINV);
+		UASM_i_MTC0(p, ptr, C0_ENTRYHI);
+		build_tlb_write_entry(p, l, r, tlb_indexed);
+
+		uasm_i_xori(p, ptr, ptr, MIPS_ENTRYHI_EHINV);
+		UASM_i_MTC0(p, ptr, C0_ENTRYHI);
+		build_huge_update_entries(p, pte, ptr);
+		build_huge_tlb_write_entry(p, l, r, pte, tlb_random, 0);
+
+		return;
+	}
+
 	build_huge_update_entries(p, pte, ptr);
 	build_huge_tlb_write_entry(p, l, r, pte, tlb_indexed, 0);
 }
@@ -2082,7 +2099,7 @@ static void build_r4000_tlb_load_handler
 		uasm_l_tlbl_goaround2(&l, p);
 	}
 	uasm_i_ori(&p, wr.r1, wr.r1, (_PAGE_ACCESSED | _PAGE_VALID));
-	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 1);
 #endif
 
 	uasm_l_nopage_tlbl(&l, p);
@@ -2137,7 +2154,7 @@ static void build_r4000_tlb_store_handle
 	build_tlb_probe_entry(&p);
 	uasm_i_ori(&p, wr.r1, wr.r1,
 		   _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
-	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 1);
 #endif
 
 	uasm_l_nopage_tlbs(&l, p);
@@ -2193,7 +2210,7 @@ static void build_r4000_tlb_modify_handl
 	build_tlb_probe_entry(&p);
 	uasm_i_ori(&p, wr.r1, wr.r1,
 		   _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
-	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 0);
 #endif
 
 	uasm_l_nopage_tlbm(&l, p);

[PATCH 4.4 32/32] mm/mempolicy.c: fix error handling in set_mempolicy and mbind.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Salls <salls@cs.ucsb.edu>

commit cf01fb9985e8deb25ccf0ea54d916b8871ae0e62 upstream.

In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.

Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mempolicy.c |   20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1492,7 +1492,6 @@ COMPAT_SYSCALL_DEFINE5(get_mempolicy, in
 COMPAT_SYSCALL_DEFINE3(set_mempolicy, int, mode, compat_ulong_t __user *, nmask,
 		       compat_ulong_t, maxnode)
 {
-	long err = 0;
 	unsigned long __user *nm = NULL;
 	unsigned long nr_bits, alloc_size;
 	DECLARE_BITMAP(bm, MAX_NUMNODES);
@@ -1501,14 +1500,13 @@ COMPAT_SYSCALL_DEFINE3(set_mempolicy, in
 	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
 
 	if (nmask) {
-		err = compat_get_bitmap(bm, nmask, nr_bits);
+		if (compat_get_bitmap(bm, nmask, nr_bits))
+			return -EFAULT;
 		nm = compat_alloc_user_space(alloc_size);
-		err |= copy_to_user(nm, bm, alloc_size);
+		if (copy_to_user(nm, bm, alloc_size))
+			return -EFAULT;
 	}
 
-	if (err)
-		return -EFAULT;
-
 	return sys_set_mempolicy(mode, nm, nr_bits+1);
 }
 
@@ -1516,7 +1514,6 @@ COMPAT_SYSCALL_DEFINE6(mbind, compat_ulo
 		       compat_ulong_t, mode, compat_ulong_t __user *, nmask,
 		       compat_ulong_t, maxnode, compat_ulong_t, flags)
 {
-	long err = 0;
 	unsigned long __user *nm = NULL;
 	unsigned long nr_bits, alloc_size;
 	nodemask_t bm;
@@ -1525,14 +1522,13 @@ COMPAT_SYSCALL_DEFINE6(mbind, compat_ulo
 	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
 
 	if (nmask) {
-		err = compat_get_bitmap(nodes_addr(bm), nmask, nr_bits);
+		if (compat_get_bitmap(nodes_addr(bm), nmask, nr_bits))
+			return -EFAULT;
 		nm = compat_alloc_user_space(alloc_size);
-		err |= copy_to_user(nm, nodes_addr(bm), alloc_size);
+		if (copy_to_user(nm, nodes_addr(bm), alloc_size))
+			return -EFAULT;
 	}
 
-	if (err)
-		return -EFAULT;
-
 	return sys_mbind(start, len, mode, nm, nr_bits+1, flags);
 }
 

Re: [PATCH 4.4 00/32] 4.4.61-stable review

[Shuah Khan]

On 04/10/2017 10:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.61 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Apr 12 16:38:14 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.61-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah