[PATCH 0/2] hwrng: mtk: add support for hardware random generator on MT7623 SoC

[PATCH 0/2] hwrng: mtk: add support for hardware random generator on MT7623 SoC

[sean.wang-NuS5LvNUpcJWk0Htik3J/w]

From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

This patchset introduces support for Mediatek hardware random generator (RNG)
Currently, the driver is already tested successfully with rng-tools on MT7623
SoC. And it should also be workable on other similar Mediatek SoCs.

SoC that also works on other similar SoCs. 
Sean Wang (2):
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

 Documentation/devicetree/bindings/rng/mtk-rng.txt |  18 +++
 drivers/char/hw_random/Kconfig                    |  16 +-
 drivers/char/hw_random/Makefile                   |   2 +-
 drivers/char/hw_random/mtk-rng.c                  | 174 ++++++++++++++++++++++
 4 files changed, 208 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt
 create mode 100644 drivers/char/hw_random/mtk-rng.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/2] hwrng: mtk: add support for hardware random generator on MT7623 SoC

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

This patchset introduces support for Mediatek hardware random generator (RNG)
Currently, the driver is already tested successfully with rng-tools on MT7623
SoC. And it should also be workable on other similar Mediatek SoCs.

SoC that also works on other similar SoCs. 
Sean Wang (2):
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

 Documentation/devicetree/bindings/rng/mtk-rng.txt |  18 +++
 drivers/char/hw_random/Kconfig                    |  16 +-
 drivers/char/hw_random/Makefile                   |   2 +-
 drivers/char/hw_random/mtk-rng.c                  | 174 ++++++++++++++++++++++
 4 files changed, 208 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt
 create mode 100644 drivers/char/hw_random/mtk-rng.c

-- 
1.9.1

[PATCH 0/2] hwrng: mtk: add support for hardware random generator on MT7623 SoC

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

This patchset introduces support for Mediatek hardware random generator (RNG)
Currently, the driver is already tested successfully with rng-tools on MT7623
SoC. And it should also be workable on other similar Mediatek SoCs.

SoC that also works on other similar SoCs. 
Sean Wang (2):
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

 Documentation/devicetree/bindings/rng/mtk-rng.txt |  18 +++
 drivers/char/hw_random/Kconfig                    |  16 +-
 drivers/char/hw_random/Makefile                   |   2 +-
 drivers/char/hw_random/mtk-rng.c                  | 174 ++++++++++++++++++++++
 4 files changed, 208 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt
 create mode 100644 drivers/char/hw_random/mtk-rng.c

-- 
1.9.1

[PATCH 0/2] hwrng: mtk: add support for hardware random generator on MT7623 SoC

[sean.wang-NuS5LvNUpcJWk0Htik3J/w]

From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

This patchset introduces support for Mediatek hardware random generator (RNG)
Currently, the driver is already tested successfully with rng-tools on MT7623
SoC. And it should also be workable on other similar Mediatek SoCs.

SoC that also works on other similar SoCs. 
Sean Wang (2):
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

 Documentation/devicetree/bindings/rng/mtk-rng.txt |  18 +++
 drivers/char/hw_random/Kconfig                    |  16 +-
 drivers/char/hw_random/Makefile                   |   2 +-
 drivers/char/hw_random/mtk-rng.c                  | 174 ++++++++++++++++++++++
 4 files changed, 208 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt
 create mode 100644 drivers/char/hw_random/mtk-rng.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] dt-bindings: hwrng: Add Mediatek hardware random generator bindings

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Document the devicetree bindings for Mediatek random number
generator which could be found on MT7623 SoC or other similar
Mediatek SoCs.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 Documentation/devicetree/bindings/rng/mtk-rng.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt

diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt
new file mode 100644
index 0000000..a6d62a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt
@@ -0,0 +1,18 @@
+Device-Tree bindings for Mediatek random number generator
+found in Mediatek SoC family
+
+Required properties:
+- compatible	    : Should be "mediatek,mt7623-rng"
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : Should contain "rng" entries;
+- reg 		    : Specifies base physical address and size of the registers
+
+Example:
+
+rng: rng@1020f000 {
+	compatible = "mediatek,mt7623-rng";
+	reg = <0 0x1020f000 0 0x1000>;
+	clocks = <&infracfg CLK_INFRA_TRNG>;
+	clock-names = "rng";
+};
-- 
1.9.1

[PATCH 1/2] dt-bindings: hwrng: Add Mediatek hardware random generator bindings

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

Document the devicetree bindings for Mediatek random number
generator which could be found on MT7623 SoC or other similar
Mediatek SoCs.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 Documentation/devicetree/bindings/rng/mtk-rng.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt

diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt
new file mode 100644
index 0000000..a6d62a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt
@@ -0,0 +1,18 @@
+Device-Tree bindings for Mediatek random number generator
+found in Mediatek SoC family
+
+Required properties:
+- compatible	    : Should be "mediatek,mt7623-rng"
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : Should contain "rng" entries;
+- reg 		    : Specifies base physical address and size of the registers
+
+Example:
+
+rng: rng at 1020f000 {
+	compatible = "mediatek,mt7623-rng";
+	reg = <0 0x1020f000 0 0x1000>;
+	clocks = <&infracfg CLK_INFRA_TRNG>;
+	clock-names = "rng";
+};
-- 
1.9.1

[PATCH 1/2] dt-bindings: hwrng: Add Mediatek hardware random generator bindings

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Document the devicetree bindings for Mediatek random number
generator which could be found on MT7623 SoC or other similar
Mediatek SoCs.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 Documentation/devicetree/bindings/rng/mtk-rng.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt

diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt
new file mode 100644
index 0000000..a6d62a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt
@@ -0,0 +1,18 @@
+Device-Tree bindings for Mediatek random number generator
+found in Mediatek SoC family
+
+Required properties:
+- compatible	    : Should be "mediatek,mt7623-rng"
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : Should contain "rng" entries;
+- reg 		    : Specifies base physical address and size of the registers
+
+Example:
+
+rng: rng@1020f000 {
+	compatible = "mediatek,mt7623-rng";
+	reg = <0 0x1020f000 0 0x1000>;
+	clocks = <&infracfg CLK_INFRA_TRNG>;
+	clock-names = "rng";
+};
-- 
1.9.1

Re: [PATCH 1/2] dt-bindings: hwrng: Add Mediatek hardware random generator bindings

[Rob Herring]

On Thu, Apr 13, 2017 at 03:05:07PM +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> 
> Document the devicetree bindings for Mediatek random number
> generator which could be found on MT7623 SoC or other similar
> Mediatek SoCs.
> 
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/rng/mtk-rng.txt | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] dt-bindings: hwrng: Add Mediatek hardware random generator bindings

[Rob Herring]

On Thu, Apr 13, 2017 at 03:05:07PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Document the devicetree bindings for Mediatek random number
> generator which could be found on MT7623 SoC or other similar
> Mediatek SoCs.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  Documentation/devicetree/bindings/rng/mtk-rng.txt | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 1/2] dt-bindings: hwrng: Add Mediatek hardware random generator bindings

[Rob Herring]

On Thu, Apr 13, 2017 at 03:05:07PM +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> Document the devicetree bindings for Mediatek random number
> generator which could be found on MT7623 SoC or other similar
> Mediatek SoCs.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  Documentation/devicetree/bindings/rng/mtk-rng.txt | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rng/mtk-rng.txt

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

This patch adds support for hardware random generator on MT7623 SoC
and should also work on other similar Mediatek SoCs. Currently,
the driver is already tested successfully with rng-tools.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/char/hw_random/Kconfig   |  16 +++-
 drivers/char/hw_random/Makefile  |   2 +-
 drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+), 2 deletions(-)
 create mode 100644 drivers/char/hw_random/mtk-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 0cafe08..af782ce 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
          Generator hardware found on Cavium SoCs.
 
          To compile this driver as a module, choose M here: the
-         module will be called cavium_rng.
+         module will be called mtk-rng.
 
          If unsure, say Y.
 
+config HW_RANDOM_MTK
+	tristate "Mediatek Random Number Generator support"
+	depends on HW_RANDOM
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	default y
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Mediatek SoCs.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called mtk-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5f52b1e..68be716 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -1,7 +1,6 @@
 #
 # Makefile for HW Random Number Generator (RNG) device drivers.
 #
-
 obj-$(CONFIG_HW_RANDOM) += rng-core.o
 rng-core-y := core.o
 obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
@@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
 obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
 obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
 obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
+obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
new file mode 100644
index 0000000..6561ee0
--- /dev/null
+++ b/drivers/char/hw_random/mtk-rng.c
@@ -0,0 +1,174 @@
+/*
+ * Driver for Mediatek Hardware Random Number Generator
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define MTK_RNG_DEV KBUILD_MODNAME
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define USEC_POLL			2
+#define TIMEOUT_POLL			20
+
+#define RNG_CTRL			0x00
+#define  RNG_EN				BIT(0)
+#define  RNG_READY			BIT(31)
+
+#define RNG_DATA			0x08
+
+#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
+
+struct mtk_rng {
+	struct device	*dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct hwrng rng;
+};
+
+static int mtk_rng_init(struct hwrng *rng)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	u32 val;
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+
+	val = readl(priv->base + RNG_CTRL);
+	val |= RNG_EN;
+	writel(val, priv->base + RNG_CTRL);
+
+	return 0;
+}
+
+static void mtk_rng_cleanup(struct hwrng *rng)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	u32 val;
+
+	val = readl(priv->base + RNG_CTRL);
+	val &= ~RNG_EN;
+	writel(val, priv->base + RNG_CTRL);
+
+	clk_disable_unprepare(priv->clk);
+}
+
+static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	int ready;
+
+	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
+	if (!ready && wait)
+		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
+					  ready & RNG_READY, USEC_POLL,
+					  TIMEOUT_POLL);
+	return !!ready;
+}
+
+static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	int retval = 0;
+
+	while (max >= sizeof(u32)) {
+		if (!mtk_rng_wait_ready(rng, wait))
+			break;
+
+		*(u32 *)buf = readl(priv->base + RNG_DATA);
+		retval += sizeof(u32);
+		buf += sizeof(u32);
+		max -= sizeof(u32);
+	}
+
+	if (unlikely(wait && max))
+		dev_warn(priv->dev, "timeout might be not properly set\n");
+
+	return retval || !wait ? retval : -EIO;
+}
+
+static int mtk_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+	struct mtk_rng *priv;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no iomem resource\n");
+		return -ENXIO;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->rng.name = pdev->name;
+	priv->rng.init = mtk_rng_init;
+	priv->rng.cleanup = mtk_rng_cleanup;
+	priv->rng.read = mtk_rng_read;
+
+	priv->clk = devm_clk_get(&pdev->dev, "rng");
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = devm_hwrng_register(&pdev->dev, &priv->rng);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register rng device: %d\n",
+			ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "registered RNG driver\n");
+
+	return 0;
+}
+
+static const struct of_device_id mtk_rng_match[] = {
+	{ .compatible = "mediatek,mt7623-rng" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_rng_match);
+
+static struct platform_driver mtk_rng_driver = {
+	.probe          = mtk_rng_probe,
+	.driver = {
+		.name = MTK_RNG_DEV,
+		.of_match_table = mtk_rng_match,
+	},
+};
+
+module_platform_driver(mtk_rng_driver);
+
+MODULE_DESCRIPTION("Mediatek Random Number Generator Driver");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang@mediatek.com>

This patch adds support for hardware random generator on MT7623 SoC
and should also work on other similar Mediatek SoCs. Currently,
the driver is already tested successfully with rng-tools.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/char/hw_random/Kconfig   |  16 +++-
 drivers/char/hw_random/Makefile  |   2 +-
 drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+), 2 deletions(-)
 create mode 100644 drivers/char/hw_random/mtk-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 0cafe08..af782ce 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
          Generator hardware found on Cavium SoCs.
 
          To compile this driver as a module, choose M here: the
-         module will be called cavium_rng.
+         module will be called mtk-rng.
 
          If unsure, say Y.
 
+config HW_RANDOM_MTK
+	tristate "Mediatek Random Number Generator support"
+	depends on HW_RANDOM
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	default y
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Mediatek SoCs.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called mtk-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5f52b1e..68be716 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -1,7 +1,6 @@
 #
 # Makefile for HW Random Number Generator (RNG) device drivers.
 #
-
 obj-$(CONFIG_HW_RANDOM) += rng-core.o
 rng-core-y := core.o
 obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
@@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
 obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
 obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
 obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
+obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
new file mode 100644
index 0000000..6561ee0
--- /dev/null
+++ b/drivers/char/hw_random/mtk-rng.c
@@ -0,0 +1,174 @@
+/*
+ * Driver for Mediatek Hardware Random Number Generator
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define MTK_RNG_DEV KBUILD_MODNAME
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define USEC_POLL			2
+#define TIMEOUT_POLL			20
+
+#define RNG_CTRL			0x00
+#define  RNG_EN				BIT(0)
+#define  RNG_READY			BIT(31)
+
+#define RNG_DATA			0x08
+
+#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
+
+struct mtk_rng {
+	struct device	*dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct hwrng rng;
+};
+
+static int mtk_rng_init(struct hwrng *rng)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	u32 val;
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+
+	val = readl(priv->base + RNG_CTRL);
+	val |= RNG_EN;
+	writel(val, priv->base + RNG_CTRL);
+
+	return 0;
+}
+
+static void mtk_rng_cleanup(struct hwrng *rng)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	u32 val;
+
+	val = readl(priv->base + RNG_CTRL);
+	val &= ~RNG_EN;
+	writel(val, priv->base + RNG_CTRL);
+
+	clk_disable_unprepare(priv->clk);
+}
+
+static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	int ready;
+
+	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
+	if (!ready && wait)
+		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
+					  ready & RNG_READY, USEC_POLL,
+					  TIMEOUT_POLL);
+	return !!ready;
+}
+
+static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	int retval = 0;
+
+	while (max >= sizeof(u32)) {
+		if (!mtk_rng_wait_ready(rng, wait))
+			break;
+
+		*(u32 *)buf = readl(priv->base + RNG_DATA);
+		retval += sizeof(u32);
+		buf += sizeof(u32);
+		max -= sizeof(u32);
+	}
+
+	if (unlikely(wait && max))
+		dev_warn(priv->dev, "timeout might be not properly set\n");
+
+	return retval || !wait ? retval : -EIO;
+}
+
+static int mtk_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+	struct mtk_rng *priv;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no iomem resource\n");
+		return -ENXIO;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->rng.name = pdev->name;
+	priv->rng.init = mtk_rng_init;
+	priv->rng.cleanup = mtk_rng_cleanup;
+	priv->rng.read = mtk_rng_read;
+
+	priv->clk = devm_clk_get(&pdev->dev, "rng");
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = devm_hwrng_register(&pdev->dev, &priv->rng);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register rng device: %d\n",
+			ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "registered RNG driver\n");
+
+	return 0;
+}
+
+static const struct of_device_id mtk_rng_match[] = {
+	{ .compatible = "mediatek,mt7623-rng" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_rng_match);
+
+static struct platform_driver mtk_rng_driver = {
+	.probe          = mtk_rng_probe,
+	.driver = {
+		.name = MTK_RNG_DEV,
+		.of_match_table = mtk_rng_match,
+	},
+};
+
+module_platform_driver(mtk_rng_driver);
+
+MODULE_DESCRIPTION("Mediatek Random Number Generator Driver");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

This patch adds support for hardware random generator on MT7623 SoC
and should also work on other similar Mediatek SoCs. Currently,
the driver is already tested successfully with rng-tools.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/char/hw_random/Kconfig   |  16 +++-
 drivers/char/hw_random/Makefile  |   2 +-
 drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+), 2 deletions(-)
 create mode 100644 drivers/char/hw_random/mtk-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 0cafe08..af782ce 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
          Generator hardware found on Cavium SoCs.
 
          To compile this driver as a module, choose M here: the
-         module will be called cavium_rng.
+         module will be called mtk-rng.
 
          If unsure, say Y.
 
+config HW_RANDOM_MTK
+	tristate "Mediatek Random Number Generator support"
+	depends on HW_RANDOM
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	default y
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Mediatek SoCs.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called mtk-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5f52b1e..68be716 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -1,7 +1,6 @@
 #
 # Makefile for HW Random Number Generator (RNG) device drivers.
 #
-
 obj-$(CONFIG_HW_RANDOM) += rng-core.o
 rng-core-y := core.o
 obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
@@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
 obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
 obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
 obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
+obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
new file mode 100644
index 0000000..6561ee0
--- /dev/null
+++ b/drivers/char/hw_random/mtk-rng.c
@@ -0,0 +1,174 @@
+/*
+ * Driver for Mediatek Hardware Random Number Generator
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define MTK_RNG_DEV KBUILD_MODNAME
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define USEC_POLL			2
+#define TIMEOUT_POLL			20
+
+#define RNG_CTRL			0x00
+#define  RNG_EN				BIT(0)
+#define  RNG_READY			BIT(31)
+
+#define RNG_DATA			0x08
+
+#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
+
+struct mtk_rng {
+	struct device	*dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct hwrng rng;
+};
+
+static int mtk_rng_init(struct hwrng *rng)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	u32 val;
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+
+	val = readl(priv->base + RNG_CTRL);
+	val |= RNG_EN;
+	writel(val, priv->base + RNG_CTRL);
+
+	return 0;
+}
+
+static void mtk_rng_cleanup(struct hwrng *rng)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	u32 val;
+
+	val = readl(priv->base + RNG_CTRL);
+	val &= ~RNG_EN;
+	writel(val, priv->base + RNG_CTRL);
+
+	clk_disable_unprepare(priv->clk);
+}
+
+static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	int ready;
+
+	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
+	if (!ready && wait)
+		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
+					  ready & RNG_READY, USEC_POLL,
+					  TIMEOUT_POLL);
+	return !!ready;
+}
+
+static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	struct mtk_rng *priv = to_mtk_rng(rng);
+	int retval = 0;
+
+	while (max >= sizeof(u32)) {
+		if (!mtk_rng_wait_ready(rng, wait))
+			break;
+
+		*(u32 *)buf = readl(priv->base + RNG_DATA);
+		retval += sizeof(u32);
+		buf += sizeof(u32);
+		max -= sizeof(u32);
+	}
+
+	if (unlikely(wait && max))
+		dev_warn(priv->dev, "timeout might be not properly set\n");
+
+	return retval || !wait ? retval : -EIO;
+}
+
+static int mtk_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+	struct mtk_rng *priv;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no iomem resource\n");
+		return -ENXIO;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->rng.name = pdev->name;
+	priv->rng.init = mtk_rng_init;
+	priv->rng.cleanup = mtk_rng_cleanup;
+	priv->rng.read = mtk_rng_read;
+
+	priv->clk = devm_clk_get(&pdev->dev, "rng");
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = devm_hwrng_register(&pdev->dev, &priv->rng);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register rng device: %d\n",
+			ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "registered RNG driver\n");
+
+	return 0;
+}
+
+static const struct of_device_id mtk_rng_match[] = {
+	{ .compatible = "mediatek,mt7623-rng" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_rng_match);
+
+static struct platform_driver mtk_rng_driver = {
+	.probe          = mtk_rng_probe,
+	.driver = {
+		.name = MTK_RNG_DEV,
+		.of_match_table = mtk_rng_match,
+	},
+};
+
+module_platform_driver(mtk_rng_driver);
+
+MODULE_DESCRIPTION("Mediatek Random Number Generator Driver");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL");
-- 
1.9.1

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[PrasannaKumar Muralidharan]

Hi Sean,

Mostly looks good, have few minor comments.

On 13 April 2017 at 12:35,  <sean.wang@mediatek.com> wrote:
> +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> +{
> +       struct mtk_rng *priv = to_mtk_rng(rng);
> +       int ready;
> +
> +       ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> +       if (!ready && wait)
> +               readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> +                                         ready & RNG_READY, USEC_POLL,
> +                                         TIMEOUT_POLL);
> +       return !!ready;
> +}

Use readl_poll_timeout_atomic's return value or -EIO instead of
!!ready. This will simplify mtk_rng_read.

> +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> +       struct mtk_rng *priv = to_mtk_rng(rng);
> +       int retval = 0;
> +
> +       while (max >= sizeof(u32)) {
> +               if (!mtk_rng_wait_ready(rng, wait))
> +                       break;
> +
> +               *(u32 *)buf = readl(priv->base + RNG_DATA);
> +               retval += sizeof(u32);
> +               buf += sizeof(u32);
> +               max -= sizeof(u32);
> +       }
> +
> +       if (unlikely(wait && max))
> +               dev_warn(priv->dev, "timeout might be not properly set\n");

Is this really necessary? Better to choose proper timeout than
providing this warning message. In rare cases if the timeout could
occur due to some reason (may be a hardware fault) print appropriate
warning message.

> +       return retval || !wait ? retval : -EIO;
> +}

Set retavl to mtk_rng_wait_ready and return retval.

Regards,
Prasanna

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[PrasannaKumar Muralidharan]

Hi Sean,

Mostly looks good, have few minor comments.

On 13 April 2017 at 12:35,  <sean.wang@mediatek.com> wrote:
> +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> +{
> +       struct mtk_rng *priv = to_mtk_rng(rng);
> +       int ready;
> +
> +       ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> +       if (!ready && wait)
> +               readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> +                                         ready & RNG_READY, USEC_POLL,
> +                                         TIMEOUT_POLL);
> +       return !!ready;
> +}

Use readl_poll_timeout_atomic's return value or -EIO instead of
!!ready. This will simplify mtk_rng_read.

> +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> +       struct mtk_rng *priv = to_mtk_rng(rng);
> +       int retval = 0;
> +
> +       while (max >= sizeof(u32)) {
> +               if (!mtk_rng_wait_ready(rng, wait))
> +                       break;
> +
> +               *(u32 *)buf = readl(priv->base + RNG_DATA);
> +               retval += sizeof(u32);
> +               buf += sizeof(u32);
> +               max -= sizeof(u32);
> +       }
> +
> +       if (unlikely(wait && max))
> +               dev_warn(priv->dev, "timeout might be not properly set\n");

Is this really necessary? Better to choose proper timeout than
providing this warning message. In rare cases if the timeout could
occur due to some reason (may be a hardware fault) print appropriate
warning message.

> +       return retval || !wait ? retval : -EIO;
> +}

Set retavl to mtk_rng_wait_ready and return retval.

Regards,
Prasanna

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi PrasannaKumar,

Add my comments inline


On Thu, 2017-04-13 at 14:09 +0530, PrasannaKumar Muralidharan wrote:
> Hi Sean,
> 
> Mostly looks good, have few minor comments.
> 
> On 13 April 2017 at 12:35,  <sean.wang@mediatek.com> wrote:
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +       struct mtk_rng *priv = to_mtk_rng(rng);
> > +       int ready;
> > +
> > +       ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +       if (!ready && wait)
> > +               readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +                                         ready & RNG_READY, USEC_POLL,
> > +                                         TIMEOUT_POLL);
> > +       return !!ready;
> > +}
> 
> Use readl_poll_timeout_atomic's return value or -EIO instead of
> !!ready. This will simplify mtk_rng_read.
> 

!!ready provided is in order to let blocking/non-blocking case could
share same code path. And readl_poll_timeout_atomic only handles
blocking case.



> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +       struct mtk_rng *priv = to_mtk_rng(rng);
> > +       int retval = 0;
> > +
> > +       while (max >= sizeof(u32)) {
> > +               if (!mtk_rng_wait_ready(rng, wait))
> > +                       break;
> > +
> > +               *(u32 *)buf = readl(priv->base + RNG_DATA);
> > +               retval += sizeof(u32);
> > +               buf += sizeof(u32);
> > +               max -= sizeof(u32);
> > +       }
> > +
> > +       if (unlikely(wait && max))
> > +               dev_warn(priv->dev, "timeout might be not properly set\n");
> 
> Is this really necessary? Better to choose proper timeout than
> providing this warning message. In rare cases if the timeout could
> occur due to some reason (may be a hardware fault) print appropriate
> warning message.

It is good, I will choose the proper timeout and remove the log in the
next one.

> 
> > +       return retval || !wait ? retval : -EIO;
> > +}
> 
> Set retavl to mtk_rng_wait_ready and return retval.
> 

Maybe i didn't get your points exactly. Adding some explanation about
thoughts here.

"return retval || !wait ? retval : -EIO;" I use can also help handling
the both cases in one line which i think is elegant enough. 

And retval is accumulated with each round if some data's existing in
hardware, so we don't return the value from mtk_rng_wait_ready().


> Regards,
> Prasanna

thanks for all your reviewing and suggestion

	Sean

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi PrasannaKumar,

Add my comments inline


On Thu, 2017-04-13 at 14:09 +0530, PrasannaKumar Muralidharan wrote:
> Hi Sean,
> 
> Mostly looks good, have few minor comments.
> 
> On 13 April 2017 at 12:35,  <sean.wang@mediatek.com> wrote:
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +       struct mtk_rng *priv = to_mtk_rng(rng);
> > +       int ready;
> > +
> > +       ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +       if (!ready && wait)
> > +               readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +                                         ready & RNG_READY, USEC_POLL,
> > +                                         TIMEOUT_POLL);
> > +       return !!ready;
> > +}
> 
> Use readl_poll_timeout_atomic's return value or -EIO instead of
> !!ready. This will simplify mtk_rng_read.
> 

!!ready provided is in order to let blocking/non-blocking case could
share same code path. And readl_poll_timeout_atomic only handles
blocking case.



> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +       struct mtk_rng *priv = to_mtk_rng(rng);
> > +       int retval = 0;
> > +
> > +       while (max >= sizeof(u32)) {
> > +               if (!mtk_rng_wait_ready(rng, wait))
> > +                       break;
> > +
> > +               *(u32 *)buf = readl(priv->base + RNG_DATA);
> > +               retval += sizeof(u32);
> > +               buf += sizeof(u32);
> > +               max -= sizeof(u32);
> > +       }
> > +
> > +       if (unlikely(wait && max))
> > +               dev_warn(priv->dev, "timeout might be not properly set\n");
> 
> Is this really necessary? Better to choose proper timeout than
> providing this warning message. In rare cases if the timeout could
> occur due to some reason (may be a hardware fault) print appropriate
> warning message.

It is good, I will choose the proper timeout and remove the log in the
next one.

> 
> > +       return retval || !wait ? retval : -EIO;
> > +}
> 
> Set retavl to mtk_rng_wait_ready and return retval.
> 

Maybe i didn't get your points exactly. Adding some explanation about
thoughts here.

"return retval || !wait ? retval : -EIO;" I use can also help handling
the both cases in one line which i think is elegant enough. 

And retval is accumulated with each round if some data's existing in
hardware, so we don't return the value from mtk_rng_wait_ready().


> Regards,
> Prasanna

thanks for all your reviewing and suggestion

	Sean

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi PrasannaKumar,

Add my comments inline


On Thu, 2017-04-13 at 14:09 +0530, PrasannaKumar Muralidharan wrote:
> Hi Sean,
> 
> Mostly looks good, have few minor comments.
> 
> On 13 April 2017 at 12:35,  <sean.wang@mediatek.com> wrote:
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +       struct mtk_rng *priv = to_mtk_rng(rng);
> > +       int ready;
> > +
> > +       ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +       if (!ready && wait)
> > +               readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +                                         ready & RNG_READY, USEC_POLL,
> > +                                         TIMEOUT_POLL);
> > +       return !!ready;
> > +}
> 
> Use readl_poll_timeout_atomic's return value or -EIO instead of
> !!ready. This will simplify mtk_rng_read.
> 

!!ready provided is in order to let blocking/non-blocking case could
share same code path. And readl_poll_timeout_atomic only handles
blocking case.



> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +       struct mtk_rng *priv = to_mtk_rng(rng);
> > +       int retval = 0;
> > +
> > +       while (max >= sizeof(u32)) {
> > +               if (!mtk_rng_wait_ready(rng, wait))
> > +                       break;
> > +
> > +               *(u32 *)buf = readl(priv->base + RNG_DATA);
> > +               retval += sizeof(u32);
> > +               buf += sizeof(u32);
> > +               max -= sizeof(u32);
> > +       }
> > +
> > +       if (unlikely(wait && max))
> > +               dev_warn(priv->dev, "timeout might be not properly set\n");
> 
> Is this really necessary? Better to choose proper timeout than
> providing this warning message. In rare cases if the timeout could
> occur due to some reason (may be a hardware fault) print appropriate
> warning message.

It is good, I will choose the proper timeout and remove the log in the
next one.

> 
> > +       return retval || !wait ? retval : -EIO;
> > +}
> 
> Set retavl to mtk_rng_wait_ready and return retval.
> 

Maybe i didn't get your points exactly. Adding some explanation about
thoughts here.

"return retval || !wait ? retval : -EIO;" I use can also help handling
the both cases in one line which i think is elegant enough. 

And retval is accumulated with each round if some data's existing in
hardware, so we don't return the value from mtk_rng_wait_ready().


> Regards,
> Prasanna

thanks for all your reviewing and suggestion

	Sean

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[PrasannaKumar Muralidharan]

On 14 April 2017 at 09:28, Sean Wang <sean.wang@mediatek.com> wrote:
>
> Hi PrasannaKumar,
>
> Add my comments inline
>
>>
>> Use readl_poll_timeout_atomic's return value or -EIO instead of
>> !!ready. This will simplify mtk_rng_read.
>>
>
> !!ready provided is in order to let blocking/non-blocking case could
> share same code path. And readl_poll_timeout_atomic only handles
> blocking case.

Missed this point. Makes sense. My previous comment about return value
in mtk_rng_read is invalid as I based it on a wrong assumption.

>
>> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
>> > +{
>> > +       struct mtk_rng *priv = to_mtk_rng(rng);
>> > +       int retval = 0;
>> > +
>> > +       while (max >= sizeof(u32)) {
>> > +               if (!mtk_rng_wait_ready(rng, wait))
>> > +                       break;
>> > +
>> > +               *(u32 *)buf = readl(priv->base + RNG_DATA);
>> > +               retval += sizeof(u32);
>> > +               buf += sizeof(u32);
>> > +               max -= sizeof(u32);
>> > +       }
>> > +
>> > +       if (unlikely(wait && max))
>> > +               dev_warn(priv->dev, "timeout might be not properly set\n");
>>
>> Is this really necessary? Better to choose proper timeout than
>> providing this warning message. In rare cases if the timeout could
>> occur due to some reason (may be a hardware fault) print appropriate
>> warning message.
>
> It is good, I will choose the proper timeout and remove the log in the
> next one.
>
>>
>> > +       return retval || !wait ? retval : -EIO;
>> > +}
>>
>> Set retavl to mtk_rng_wait_ready and return retval.
>>
>
> Maybe i didn't get your points exactly. Adding some explanation about
> thoughts here.
>
> "return retval || !wait ? retval : -EIO;" I use can also help handling
> the both cases in one line which i think is elegant enough.
>
> And retval is accumulated with each round if some data's existing in
> hardware, so we don't return the value from mtk_rng_wait_ready().

retval can be 0 only when mkt_rng_wait_ready fails, returning 0 when
wait is true is confusing. Expected return value when 0 bytes is read
from device and wait is true is not clearly documented.

"return retval || !wait ? retval : -EIO;" is also fine.

Overall the code looks good to me. You can add:
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>.

Regards,
PrasannaKumar

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[PrasannaKumar Muralidharan]

On 14 April 2017 at 09:28, Sean Wang <sean.wang@mediatek.com> wrote:
>
> Hi PrasannaKumar,
>
> Add my comments inline
>
>>
>> Use readl_poll_timeout_atomic's return value or -EIO instead of
>> !!ready. This will simplify mtk_rng_read.
>>
>
> !!ready provided is in order to let blocking/non-blocking case could
> share same code path. And readl_poll_timeout_atomic only handles
> blocking case.

Missed this point. Makes sense. My previous comment about return value
in mtk_rng_read is invalid as I based it on a wrong assumption.

>
>> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
>> > +{
>> > +       struct mtk_rng *priv = to_mtk_rng(rng);
>> > +       int retval = 0;
>> > +
>> > +       while (max >= sizeof(u32)) {
>> > +               if (!mtk_rng_wait_ready(rng, wait))
>> > +                       break;
>> > +
>> > +               *(u32 *)buf = readl(priv->base + RNG_DATA);
>> > +               retval += sizeof(u32);
>> > +               buf += sizeof(u32);
>> > +               max -= sizeof(u32);
>> > +       }
>> > +
>> > +       if (unlikely(wait && max))
>> > +               dev_warn(priv->dev, "timeout might be not properly set\n");
>>
>> Is this really necessary? Better to choose proper timeout than
>> providing this warning message. In rare cases if the timeout could
>> occur due to some reason (may be a hardware fault) print appropriate
>> warning message.
>
> It is good, I will choose the proper timeout and remove the log in the
> next one.
>
>>
>> > +       return retval || !wait ? retval : -EIO;
>> > +}
>>
>> Set retavl to mtk_rng_wait_ready and return retval.
>>
>
> Maybe i didn't get your points exactly. Adding some explanation about
> thoughts here.
>
> "return retval || !wait ? retval : -EIO;" I use can also help handling
> the both cases in one line which i think is elegant enough.
>
> And retval is accumulated with each round if some data's existing in
> hardware, so we don't return the value from mtk_rng_wait_ready().

retval can be 0 only when mkt_rng_wait_ready fails, returning 0 when
wait is true is confusing. Expected return value when 0 bytes is read
from device and wait is true is not clearly documented.

"return retval || !wait ? retval : -EIO;" is also fine.

Overall the code looks good to me. You can add:
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>.

Regards,
PrasannaKumar

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Corentin Labbe]

Hello

I have some minor comment below:

On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> 
> This patch adds support for hardware random generator on MT7623 SoC
> and should also work on other similar Mediatek SoCs. Currently,
> the driver is already tested successfully with rng-tools.
> 
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  drivers/char/hw_random/Kconfig   |  16 +++-
>  drivers/char/hw_random/Makefile  |   2 +-
>  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 190 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/char/hw_random/mtk-rng.c
> 
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index 0cafe08..af782ce 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
>           Generator hardware found on Cavium SoCs.
>  
>           To compile this driver as a module, choose M here: the
> -         module will be called cavium_rng.
> +         module will be called mtk-rng.

Unwanted change

>  
>           If unsure, say Y.
>  
> +config HW_RANDOM_MTK
> +	tristate "Mediatek Random Number Generator support"
> +	depends on HW_RANDOM
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	default y
> +	---help---
> +	  This driver provides kernel-side support for the Random Number
> +	  Generator hardware found on Mediatek SoCs.
> +
> +	  To compile this driver as a module, choose M here. the
> +	  module will be called mtk-rng.
> +
> +	  If unsure, say Y.
> +
>  endif # HW_RANDOM
>  
>  config UML_RANDOM
> diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> index 5f52b1e..68be716 100644
> --- a/drivers/char/hw_random/Makefile
> +++ b/drivers/char/hw_random/Makefile
> @@ -1,7 +1,6 @@
>  #
>  # Makefile for HW Random Number Generator (RNG) device drivers.
>  #
> -

Another unwanted change

>  obj-$(CONFIG_HW_RANDOM) += rng-core.o
>  rng-core-y := core.o
>  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
>  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
>  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
>  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> new file mode 100644
> index 0000000..6561ee0
> --- /dev/null
> +++ b/drivers/char/hw_random/mtk-rng.c
> @@ -0,0 +1,174 @@
> +/*
> + * Driver for Mediatek Hardware Random Number Generator
> + *
> + * Copyright (C) 2017 Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#define MTK_RNG_DEV KBUILD_MODNAME
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hw_random.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#define USEC_POLL			2
> +#define TIMEOUT_POLL			20
> +
> +#define RNG_CTRL			0x00
> +#define  RNG_EN				BIT(0)
> +#define  RNG_READY			BIT(31)

Keep only one space between define and name

> +
> +#define RNG_DATA			0x08
> +
> +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> +
> +struct mtk_rng {
> +	struct device	*dev;
> +	void __iomem *base;
> +	struct clk *clk;
> +	struct hwrng rng;
> +};
> +
> +static int mtk_rng_init(struct hwrng *rng)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	u32 val;
> +	int err;
> +
> +	err = clk_prepare_enable(priv->clk);
> +	if (err)
> +		return err;
> +
> +	val = readl(priv->base + RNG_CTRL);
> +	val |= RNG_EN;
> +	writel(val, priv->base + RNG_CTRL);
> +
> +	return 0;
> +}
> +
> +static void mtk_rng_cleanup(struct hwrng *rng)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	u32 val;
> +
> +	val = readl(priv->base + RNG_CTRL);
> +	val &= ~RNG_EN;
> +	writel(val, priv->base + RNG_CTRL);
> +
> +	clk_disable_unprepare(priv->clk);
> +}
> +
> +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	int ready;
> +
> +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> +	if (!ready && wait)
> +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> +					  ready & RNG_READY, USEC_POLL,
> +					  TIMEOUT_POLL);
> +	return !!ready;
> +}
> +
> +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	int retval = 0;
> +
> +	while (max >= sizeof(u32)) {
> +		if (!mtk_rng_wait_ready(rng, wait))
> +			break;
> +
> +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> +		retval += sizeof(u32);
> +		buf += sizeof(u32);
> +		max -= sizeof(u32);
> +	}
> +
> +	if (unlikely(wait && max))
> +		dev_warn(priv->dev, "timeout might be not properly set\n");
> +
> +	return retval || !wait ? retval : -EIO;
> +}
> +
> +static int mtk_rng_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	int ret;
> +	struct mtk_rng *priv;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "no iomem resource\n");
> +		return -ENXIO;
> +	}
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->dev = &pdev->dev;
> +	priv->rng.name = pdev->name;
> +	priv->rng.init = mtk_rng_init;
> +	priv->rng.cleanup = mtk_rng_cleanup;
> +	priv->rng.read = mtk_rng_read;
> +
> +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> +	if (IS_ERR(priv->clk)) {
> +		ret = PTR_ERR(priv->clk);
> +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

You get that resource twice

Regards
Corentin Labbe
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Corentin Labbe]

Hello

I have some minor comment below:

On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> This patch adds support for hardware random generator on MT7623 SoC
> and should also work on other similar Mediatek SoCs. Currently,
> the driver is already tested successfully with rng-tools.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  drivers/char/hw_random/Kconfig   |  16 +++-
>  drivers/char/hw_random/Makefile  |   2 +-
>  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 190 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/char/hw_random/mtk-rng.c
> 
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index 0cafe08..af782ce 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
>           Generator hardware found on Cavium SoCs.
>  
>           To compile this driver as a module, choose M here: the
> -         module will be called cavium_rng.
> +         module will be called mtk-rng.

Unwanted change

>  
>           If unsure, say Y.
>  
> +config HW_RANDOM_MTK
> +	tristate "Mediatek Random Number Generator support"
> +	depends on HW_RANDOM
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	default y
> +	---help---
> +	  This driver provides kernel-side support for the Random Number
> +	  Generator hardware found on Mediatek SoCs.
> +
> +	  To compile this driver as a module, choose M here. the
> +	  module will be called mtk-rng.
> +
> +	  If unsure, say Y.
> +
>  endif # HW_RANDOM
>  
>  config UML_RANDOM
> diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> index 5f52b1e..68be716 100644
> --- a/drivers/char/hw_random/Makefile
> +++ b/drivers/char/hw_random/Makefile
> @@ -1,7 +1,6 @@
>  #
>  # Makefile for HW Random Number Generator (RNG) device drivers.
>  #
> -

Another unwanted change

>  obj-$(CONFIG_HW_RANDOM) += rng-core.o
>  rng-core-y := core.o
>  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
>  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
>  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
>  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> new file mode 100644
> index 0000000..6561ee0
> --- /dev/null
> +++ b/drivers/char/hw_random/mtk-rng.c
> @@ -0,0 +1,174 @@
> +/*
> + * Driver for Mediatek Hardware Random Number Generator
> + *
> + * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#define MTK_RNG_DEV KBUILD_MODNAME
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hw_random.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#define USEC_POLL			2
> +#define TIMEOUT_POLL			20
> +
> +#define RNG_CTRL			0x00
> +#define  RNG_EN				BIT(0)
> +#define  RNG_READY			BIT(31)

Keep only one space between define and name

> +
> +#define RNG_DATA			0x08
> +
> +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> +
> +struct mtk_rng {
> +	struct device	*dev;
> +	void __iomem *base;
> +	struct clk *clk;
> +	struct hwrng rng;
> +};
> +
> +static int mtk_rng_init(struct hwrng *rng)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	u32 val;
> +	int err;
> +
> +	err = clk_prepare_enable(priv->clk);
> +	if (err)
> +		return err;
> +
> +	val = readl(priv->base + RNG_CTRL);
> +	val |= RNG_EN;
> +	writel(val, priv->base + RNG_CTRL);
> +
> +	return 0;
> +}
> +
> +static void mtk_rng_cleanup(struct hwrng *rng)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	u32 val;
> +
> +	val = readl(priv->base + RNG_CTRL);
> +	val &= ~RNG_EN;
> +	writel(val, priv->base + RNG_CTRL);
> +
> +	clk_disable_unprepare(priv->clk);
> +}
> +
> +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	int ready;
> +
> +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> +	if (!ready && wait)
> +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> +					  ready & RNG_READY, USEC_POLL,
> +					  TIMEOUT_POLL);
> +	return !!ready;
> +}
> +
> +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	int retval = 0;
> +
> +	while (max >= sizeof(u32)) {
> +		if (!mtk_rng_wait_ready(rng, wait))
> +			break;
> +
> +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> +		retval += sizeof(u32);
> +		buf += sizeof(u32);
> +		max -= sizeof(u32);
> +	}
> +
> +	if (unlikely(wait && max))
> +		dev_warn(priv->dev, "timeout might be not properly set\n");
> +
> +	return retval || !wait ? retval : -EIO;
> +}
> +
> +static int mtk_rng_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	int ret;
> +	struct mtk_rng *priv;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "no iomem resource\n");
> +		return -ENXIO;
> +	}
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->dev = &pdev->dev;
> +	priv->rng.name = pdev->name;
> +	priv->rng.init = mtk_rng_init;
> +	priv->rng.cleanup = mtk_rng_cleanup;
> +	priv->rng.read = mtk_rng_read;
> +
> +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> +	if (IS_ERR(priv->clk)) {
> +		ret = PTR_ERR(priv->clk);
> +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

You get that resource twice

Regards
Corentin Labbe

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Corentin Labbe]

Hello

I have some minor comment below:

On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> This patch adds support for hardware random generator on MT7623 SoC
> and should also work on other similar Mediatek SoCs. Currently,
> the driver is already tested successfully with rng-tools.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
>  drivers/char/hw_random/Kconfig   |  16 +++-
>  drivers/char/hw_random/Makefile  |   2 +-
>  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 190 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/char/hw_random/mtk-rng.c
> 
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index 0cafe08..af782ce 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
>           Generator hardware found on Cavium SoCs.
>  
>           To compile this driver as a module, choose M here: the
> -         module will be called cavium_rng.
> +         module will be called mtk-rng.

Unwanted change

>  
>           If unsure, say Y.
>  
> +config HW_RANDOM_MTK
> +	tristate "Mediatek Random Number Generator support"
> +	depends on HW_RANDOM
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	default y
> +	---help---
> +	  This driver provides kernel-side support for the Random Number
> +	  Generator hardware found on Mediatek SoCs.
> +
> +	  To compile this driver as a module, choose M here. the
> +	  module will be called mtk-rng.
> +
> +	  If unsure, say Y.
> +
>  endif # HW_RANDOM
>  
>  config UML_RANDOM
> diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> index 5f52b1e..68be716 100644
> --- a/drivers/char/hw_random/Makefile
> +++ b/drivers/char/hw_random/Makefile
> @@ -1,7 +1,6 @@
>  #
>  # Makefile for HW Random Number Generator (RNG) device drivers.
>  #
> -

Another unwanted change

>  obj-$(CONFIG_HW_RANDOM) += rng-core.o
>  rng-core-y := core.o
>  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
>  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
>  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
>  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> new file mode 100644
> index 0000000..6561ee0
> --- /dev/null
> +++ b/drivers/char/hw_random/mtk-rng.c
> @@ -0,0 +1,174 @@
> +/*
> + * Driver for Mediatek Hardware Random Number Generator
> + *
> + * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#define MTK_RNG_DEV KBUILD_MODNAME
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hw_random.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#define USEC_POLL			2
> +#define TIMEOUT_POLL			20
> +
> +#define RNG_CTRL			0x00
> +#define  RNG_EN				BIT(0)
> +#define  RNG_READY			BIT(31)

Keep only one space between define and name

> +
> +#define RNG_DATA			0x08
> +
> +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> +
> +struct mtk_rng {
> +	struct device	*dev;
> +	void __iomem *base;
> +	struct clk *clk;
> +	struct hwrng rng;
> +};
> +
> +static int mtk_rng_init(struct hwrng *rng)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	u32 val;
> +	int err;
> +
> +	err = clk_prepare_enable(priv->clk);
> +	if (err)
> +		return err;
> +
> +	val = readl(priv->base + RNG_CTRL);
> +	val |= RNG_EN;
> +	writel(val, priv->base + RNG_CTRL);
> +
> +	return 0;
> +}
> +
> +static void mtk_rng_cleanup(struct hwrng *rng)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	u32 val;
> +
> +	val = readl(priv->base + RNG_CTRL);
> +	val &= ~RNG_EN;
> +	writel(val, priv->base + RNG_CTRL);
> +
> +	clk_disable_unprepare(priv->clk);
> +}
> +
> +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	int ready;
> +
> +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> +	if (!ready && wait)
> +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> +					  ready & RNG_READY, USEC_POLL,
> +					  TIMEOUT_POLL);
> +	return !!ready;
> +}
> +
> +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> +{
> +	struct mtk_rng *priv = to_mtk_rng(rng);
> +	int retval = 0;
> +
> +	while (max >= sizeof(u32)) {
> +		if (!mtk_rng_wait_ready(rng, wait))
> +			break;
> +
> +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> +		retval += sizeof(u32);
> +		buf += sizeof(u32);
> +		max -= sizeof(u32);
> +	}
> +
> +	if (unlikely(wait && max))
> +		dev_warn(priv->dev, "timeout might be not properly set\n");
> +
> +	return retval || !wait ? retval : -EIO;
> +}
> +
> +static int mtk_rng_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	int ret;
> +	struct mtk_rng *priv;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "no iomem resource\n");
> +		return -ENXIO;
> +	}
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->dev = &pdev->dev;
> +	priv->rng.name = pdev->name;
> +	priv->rng.init = mtk_rng_init;
> +	priv->rng.cleanup = mtk_rng_cleanup;
> +	priv->rng.read = mtk_rng_read;
> +
> +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> +	if (IS_ERR(priv->clk)) {
> +		ret = PTR_ERR(priv->clk);
> +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

You get that resource twice

Regards
Corentin Labbe

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi Corentin,

I all agree and appreciate your careful reviewing. 

They will be added into the next one.

	Sean

On Thu, 2017-04-13 at 13:06 +0200, Corentin Labbe wrote:
> Hello
> 
> I have some minor comment below:
> 
> On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > 
> > This patch adds support for hardware random generator on MT7623 SoC
> > and should also work on other similar Mediatek SoCs. Currently,
> > the driver is already tested successfully with rng-tools.
> > 
> > Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> >  drivers/char/hw_random/Kconfig   |  16 +++-
> >  drivers/char/hw_random/Makefile  |   2 +-
> >  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 190 insertions(+), 2 deletions(-)
> >  create mode 100644 drivers/char/hw_random/mtk-rng.c
> > 
> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> > index 0cafe08..af782ce 100644
> > --- a/drivers/char/hw_random/Kconfig
> > +++ b/drivers/char/hw_random/Kconfig
> > @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
> >           Generator hardware found on Cavium SoCs.
> >  
> >           To compile this driver as a module, choose M here: the
> > -         module will be called cavium_rng.
> > +         module will be called mtk-rng.
> 
> Unwanted change
> 
> >  
> >           If unsure, say Y.
> >  
> > +config HW_RANDOM_MTK
> > +	tristate "Mediatek Random Number Generator support"
> > +	depends on HW_RANDOM
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	default y
> > +	---help---
> > +	  This driver provides kernel-side support for the Random Number
> > +	  Generator hardware found on Mediatek SoCs.
> > +
> > +	  To compile this driver as a module, choose M here. the
> > +	  module will be called mtk-rng.
> > +
> > +	  If unsure, say Y.
> > +
> >  endif # HW_RANDOM
> >  
> >  config UML_RANDOM
> > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> > index 5f52b1e..68be716 100644
> > --- a/drivers/char/hw_random/Makefile
> > +++ b/drivers/char/hw_random/Makefile
> > @@ -1,7 +1,6 @@
> >  #
> >  # Makefile for HW Random Number Generator (RNG) device drivers.
> >  #
> > -
> 
> Another unwanted change
> 
> >  obj-$(CONFIG_HW_RANDOM) += rng-core.o
> >  rng-core-y := core.o
> >  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> > @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
> >  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> > +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> > diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> > new file mode 100644
> > index 0000000..6561ee0
> > --- /dev/null
> > +++ b/drivers/char/hw_random/mtk-rng.c
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Driver for Mediatek Hardware Random Number Generator
> > + *
> > + * Copyright (C) 2017 Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#define MTK_RNG_DEV KBUILD_MODNAME
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/hw_random.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define USEC_POLL			2
> > +#define TIMEOUT_POLL			20
> > +
> > +#define RNG_CTRL			0x00
> > +#define  RNG_EN				BIT(0)
> > +#define  RNG_READY			BIT(31)
> 
> Keep only one space between define and name
> 
> > +
> > +#define RNG_DATA			0x08
> > +
> > +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> > +
> > +struct mtk_rng {
> > +	struct device	*dev;
> > +	void __iomem *base;
> > +	struct clk *clk;
> > +	struct hwrng rng;
> > +};
> > +
> > +static int mtk_rng_init(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +	int err;
> > +
> > +	err = clk_prepare_enable(priv->clk);
> > +	if (err)
> > +		return err;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val |= RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	return 0;
> > +}
> > +
> > +static void mtk_rng_cleanup(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val &= ~RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	clk_disable_unprepare(priv->clk);
> > +}
> > +
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int ready;
> > +
> > +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +	if (!ready && wait)
> > +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +					  ready & RNG_READY, USEC_POLL,
> > +					  TIMEOUT_POLL);
> > +	return !!ready;
> > +}
> > +
> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int retval = 0;
> > +
> > +	while (max >= sizeof(u32)) {
> > +		if (!mtk_rng_wait_ready(rng, wait))
> > +			break;
> > +
> > +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> > +		retval += sizeof(u32);
> > +		buf += sizeof(u32);
> > +		max -= sizeof(u32);
> > +	}
> > +
> > +	if (unlikely(wait && max))
> > +		dev_warn(priv->dev, "timeout might be not properly set\n");
> > +
> > +	return retval || !wait ? retval : -EIO;
> > +}
> > +
> > +static int mtk_rng_probe(struct platform_device *pdev)
> > +{
> > +	struct resource *res;
> > +	int ret;
> > +	struct mtk_rng *priv;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "no iomem resource\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > +	if (!priv)
> > +		return -ENOMEM;
> > +
> > +	priv->dev = &pdev->dev;
> > +	priv->rng.name = pdev->name;
> > +	priv->rng.init = mtk_rng_init;
> > +	priv->rng.cleanup = mtk_rng_cleanup;
> > +	priv->rng.read = mtk_rng_read;
> > +
> > +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> > +	if (IS_ERR(priv->clk)) {
> > +		ret = PTR_ERR(priv->clk);
> > +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> 
> You get that resource twice
> 
> Regards
> Corentin Labbe


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi Corentin,

I all agree and appreciate your careful reviewing. 

They will be added into the next one.

	Sean

On Thu, 2017-04-13 at 13:06 +0200, Corentin Labbe wrote:
> Hello
> 
> I have some minor comment below:
> 
> On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > This patch adds support for hardware random generator on MT7623 SoC
> > and should also work on other similar Mediatek SoCs. Currently,
> > the driver is already tested successfully with rng-tools.
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> >  drivers/char/hw_random/Kconfig   |  16 +++-
> >  drivers/char/hw_random/Makefile  |   2 +-
> >  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 190 insertions(+), 2 deletions(-)
> >  create mode 100644 drivers/char/hw_random/mtk-rng.c
> > 
> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> > index 0cafe08..af782ce 100644
> > --- a/drivers/char/hw_random/Kconfig
> > +++ b/drivers/char/hw_random/Kconfig
> > @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
> >           Generator hardware found on Cavium SoCs.
> >  
> >           To compile this driver as a module, choose M here: the
> > -         module will be called cavium_rng.
> > +         module will be called mtk-rng.
> 
> Unwanted change
> 
> >  
> >           If unsure, say Y.
> >  
> > +config HW_RANDOM_MTK
> > +	tristate "Mediatek Random Number Generator support"
> > +	depends on HW_RANDOM
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	default y
> > +	---help---
> > +	  This driver provides kernel-side support for the Random Number
> > +	  Generator hardware found on Mediatek SoCs.
> > +
> > +	  To compile this driver as a module, choose M here. the
> > +	  module will be called mtk-rng.
> > +
> > +	  If unsure, say Y.
> > +
> >  endif # HW_RANDOM
> >  
> >  config UML_RANDOM
> > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> > index 5f52b1e..68be716 100644
> > --- a/drivers/char/hw_random/Makefile
> > +++ b/drivers/char/hw_random/Makefile
> > @@ -1,7 +1,6 @@
> >  #
> >  # Makefile for HW Random Number Generator (RNG) device drivers.
> >  #
> > -
> 
> Another unwanted change
> 
> >  obj-$(CONFIG_HW_RANDOM) += rng-core.o
> >  rng-core-y := core.o
> >  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> > @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
> >  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> > +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> > diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> > new file mode 100644
> > index 0000000..6561ee0
> > --- /dev/null
> > +++ b/drivers/char/hw_random/mtk-rng.c
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Driver for Mediatek Hardware Random Number Generator
> > + *
> > + * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#define MTK_RNG_DEV KBUILD_MODNAME
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/hw_random.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define USEC_POLL			2
> > +#define TIMEOUT_POLL			20
> > +
> > +#define RNG_CTRL			0x00
> > +#define  RNG_EN				BIT(0)
> > +#define  RNG_READY			BIT(31)
> 
> Keep only one space between define and name
> 
> > +
> > +#define RNG_DATA			0x08
> > +
> > +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> > +
> > +struct mtk_rng {
> > +	struct device	*dev;
> > +	void __iomem *base;
> > +	struct clk *clk;
> > +	struct hwrng rng;
> > +};
> > +
> > +static int mtk_rng_init(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +	int err;
> > +
> > +	err = clk_prepare_enable(priv->clk);
> > +	if (err)
> > +		return err;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val |= RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	return 0;
> > +}
> > +
> > +static void mtk_rng_cleanup(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val &= ~RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	clk_disable_unprepare(priv->clk);
> > +}
> > +
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int ready;
> > +
> > +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +	if (!ready && wait)
> > +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +					  ready & RNG_READY, USEC_POLL,
> > +					  TIMEOUT_POLL);
> > +	return !!ready;
> > +}
> > +
> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int retval = 0;
> > +
> > +	while (max >= sizeof(u32)) {
> > +		if (!mtk_rng_wait_ready(rng, wait))
> > +			break;
> > +
> > +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> > +		retval += sizeof(u32);
> > +		buf += sizeof(u32);
> > +		max -= sizeof(u32);
> > +	}
> > +
> > +	if (unlikely(wait && max))
> > +		dev_warn(priv->dev, "timeout might be not properly set\n");
> > +
> > +	return retval || !wait ? retval : -EIO;
> > +}
> > +
> > +static int mtk_rng_probe(struct platform_device *pdev)
> > +{
> > +	struct resource *res;
> > +	int ret;
> > +	struct mtk_rng *priv;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "no iomem resource\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > +	if (!priv)
> > +		return -ENOMEM;
> > +
> > +	priv->dev = &pdev->dev;
> > +	priv->rng.name = pdev->name;
> > +	priv->rng.init = mtk_rng_init;
> > +	priv->rng.cleanup = mtk_rng_cleanup;
> > +	priv->rng.read = mtk_rng_read;
> > +
> > +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> > +	if (IS_ERR(priv->clk)) {
> > +		ret = PTR_ERR(priv->clk);
> > +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> 
> You get that resource twice
> 
> Regards
> Corentin Labbe

[PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi Corentin,

I all agree and appreciate your careful reviewing. 

They will be added into the next one.

	Sean

On Thu, 2017-04-13 at 13:06 +0200, Corentin Labbe wrote:
> Hello
> 
> I have some minor comment below:
> 
> On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > This patch adds support for hardware random generator on MT7623 SoC
> > and should also work on other similar Mediatek SoCs. Currently,
> > the driver is already tested successfully with rng-tools.
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> >  drivers/char/hw_random/Kconfig   |  16 +++-
> >  drivers/char/hw_random/Makefile  |   2 +-
> >  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 190 insertions(+), 2 deletions(-)
> >  create mode 100644 drivers/char/hw_random/mtk-rng.c
> > 
> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> > index 0cafe08..af782ce 100644
> > --- a/drivers/char/hw_random/Kconfig
> > +++ b/drivers/char/hw_random/Kconfig
> > @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
> >           Generator hardware found on Cavium SoCs.
> >  
> >           To compile this driver as a module, choose M here: the
> > -         module will be called cavium_rng.
> > +         module will be called mtk-rng.
> 
> Unwanted change
> 
> >  
> >           If unsure, say Y.
> >  
> > +config HW_RANDOM_MTK
> > +	tristate "Mediatek Random Number Generator support"
> > +	depends on HW_RANDOM
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	default y
> > +	---help---
> > +	  This driver provides kernel-side support for the Random Number
> > +	  Generator hardware found on Mediatek SoCs.
> > +
> > +	  To compile this driver as a module, choose M here. the
> > +	  module will be called mtk-rng.
> > +
> > +	  If unsure, say Y.
> > +
> >  endif # HW_RANDOM
> >  
> >  config UML_RANDOM
> > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> > index 5f52b1e..68be716 100644
> > --- a/drivers/char/hw_random/Makefile
> > +++ b/drivers/char/hw_random/Makefile
> > @@ -1,7 +1,6 @@
> >  #
> >  # Makefile for HW Random Number Generator (RNG) device drivers.
> >  #
> > -
> 
> Another unwanted change
> 
> >  obj-$(CONFIG_HW_RANDOM) += rng-core.o
> >  rng-core-y := core.o
> >  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> > @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
> >  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> > +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> > diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> > new file mode 100644
> > index 0000000..6561ee0
> > --- /dev/null
> > +++ b/drivers/char/hw_random/mtk-rng.c
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Driver for Mediatek Hardware Random Number Generator
> > + *
> > + * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#define MTK_RNG_DEV KBUILD_MODNAME
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/hw_random.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define USEC_POLL			2
> > +#define TIMEOUT_POLL			20
> > +
> > +#define RNG_CTRL			0x00
> > +#define  RNG_EN				BIT(0)
> > +#define  RNG_READY			BIT(31)
> 
> Keep only one space between define and name
> 
> > +
> > +#define RNG_DATA			0x08
> > +
> > +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> > +
> > +struct mtk_rng {
> > +	struct device	*dev;
> > +	void __iomem *base;
> > +	struct clk *clk;
> > +	struct hwrng rng;
> > +};
> > +
> > +static int mtk_rng_init(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +	int err;
> > +
> > +	err = clk_prepare_enable(priv->clk);
> > +	if (err)
> > +		return err;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val |= RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	return 0;
> > +}
> > +
> > +static void mtk_rng_cleanup(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val &= ~RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	clk_disable_unprepare(priv->clk);
> > +}
> > +
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int ready;
> > +
> > +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +	if (!ready && wait)
> > +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +					  ready & RNG_READY, USEC_POLL,
> > +					  TIMEOUT_POLL);
> > +	return !!ready;
> > +}
> > +
> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int retval = 0;
> > +
> > +	while (max >= sizeof(u32)) {
> > +		if (!mtk_rng_wait_ready(rng, wait))
> > +			break;
> > +
> > +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> > +		retval += sizeof(u32);
> > +		buf += sizeof(u32);
> > +		max -= sizeof(u32);
> > +	}
> > +
> > +	if (unlikely(wait && max))
> > +		dev_warn(priv->dev, "timeout might be not properly set\n");
> > +
> > +	return retval || !wait ? retval : -EIO;
> > +}
> > +
> > +static int mtk_rng_probe(struct platform_device *pdev)
> > +{
> > +	struct resource *res;
> > +	int ret;
> > +	struct mtk_rng *priv;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "no iomem resource\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > +	if (!priv)
> > +		return -ENOMEM;
> > +
> > +	priv->dev = &pdev->dev;
> > +	priv->rng.name = pdev->name;
> > +	priv->rng.init = mtk_rng_init;
> > +	priv->rng.cleanup = mtk_rng_cleanup;
> > +	priv->rng.read = mtk_rng_read;
> > +
> > +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> > +	if (IS_ERR(priv->clk)) {
> > +		ret = PTR_ERR(priv->clk);
> > +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> 
> You get that resource twice
> 
> Regards
> Corentin Labbe

Re: [PATCH 2/2] hwrng: mtk: Add driver for hardware random generator on MT7623 SoC

[Sean Wang]

Hi Corentin,

I all agree and appreciate your careful reviewing. 

They will be added into the next one.

	Sean

On Thu, 2017-04-13 at 13:06 +0200, Corentin Labbe wrote:
> Hello
> 
> I have some minor comment below:
> 
> On Thu, Apr 13, 2017 at 03:05:08PM +0800, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > 
> > This patch adds support for hardware random generator on MT7623 SoC
> > and should also work on other similar Mediatek SoCs. Currently,
> > the driver is already tested successfully with rng-tools.
> > 
> > Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> >  drivers/char/hw_random/Kconfig   |  16 +++-
> >  drivers/char/hw_random/Makefile  |   2 +-
> >  drivers/char/hw_random/mtk-rng.c | 174 +++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 190 insertions(+), 2 deletions(-)
> >  create mode 100644 drivers/char/hw_random/mtk-rng.c
> > 
> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> > index 0cafe08..af782ce 100644
> > --- a/drivers/char/hw_random/Kconfig
> > +++ b/drivers/char/hw_random/Kconfig
> > @@ -419,10 +419,24 @@ config HW_RANDOM_CAVIUM
> >           Generator hardware found on Cavium SoCs.
> >  
> >           To compile this driver as a module, choose M here: the
> > -         module will be called cavium_rng.
> > +         module will be called mtk-rng.
> 
> Unwanted change
> 
> >  
> >           If unsure, say Y.
> >  
> > +config HW_RANDOM_MTK
> > +	tristate "Mediatek Random Number Generator support"
> > +	depends on HW_RANDOM
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	default y
> > +	---help---
> > +	  This driver provides kernel-side support for the Random Number
> > +	  Generator hardware found on Mediatek SoCs.
> > +
> > +	  To compile this driver as a module, choose M here. the
> > +	  module will be called mtk-rng.
> > +
> > +	  If unsure, say Y.
> > +
> >  endif # HW_RANDOM
> >  
> >  config UML_RANDOM
> > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> > index 5f52b1e..68be716 100644
> > --- a/drivers/char/hw_random/Makefile
> > +++ b/drivers/char/hw_random/Makefile
> > @@ -1,7 +1,6 @@
> >  #
> >  # Makefile for HW Random Number Generator (RNG) device drivers.
> >  #
> > -
> 
> Another unwanted change
> 
> >  obj-$(CONFIG_HW_RANDOM) += rng-core.o
> >  rng-core-y := core.o
> >  obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
> > @@ -36,3 +35,4 @@ obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
> >  obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
> >  obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> > +obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
> > diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
> > new file mode 100644
> > index 0000000..6561ee0
> > --- /dev/null
> > +++ b/drivers/char/hw_random/mtk-rng.c
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Driver for Mediatek Hardware Random Number Generator
> > + *
> > + * Copyright (C) 2017 Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#define MTK_RNG_DEV KBUILD_MODNAME
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/hw_random.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define USEC_POLL			2
> > +#define TIMEOUT_POLL			20
> > +
> > +#define RNG_CTRL			0x00
> > +#define  RNG_EN				BIT(0)
> > +#define  RNG_READY			BIT(31)
> 
> Keep only one space between define and name
> 
> > +
> > +#define RNG_DATA			0x08
> > +
> > +#define to_mtk_rng(p)	container_of(p, struct mtk_rng, rng)
> > +
> > +struct mtk_rng {
> > +	struct device	*dev;
> > +	void __iomem *base;
> > +	struct clk *clk;
> > +	struct hwrng rng;
> > +};
> > +
> > +static int mtk_rng_init(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +	int err;
> > +
> > +	err = clk_prepare_enable(priv->clk);
> > +	if (err)
> > +		return err;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val |= RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	return 0;
> > +}
> > +
> > +static void mtk_rng_cleanup(struct hwrng *rng)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	u32 val;
> > +
> > +	val = readl(priv->base + RNG_CTRL);
> > +	val &= ~RNG_EN;
> > +	writel(val, priv->base + RNG_CTRL);
> > +
> > +	clk_disable_unprepare(priv->clk);
> > +}
> > +
> > +static bool mtk_rng_wait_ready(struct hwrng *rng, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int ready;
> > +
> > +	ready = readl(priv->base + RNG_CTRL) & RNG_READY;
> > +	if (!ready && wait)
> > +		readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
> > +					  ready & RNG_READY, USEC_POLL,
> > +					  TIMEOUT_POLL);
> > +	return !!ready;
> > +}
> > +
> > +static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > +	struct mtk_rng *priv = to_mtk_rng(rng);
> > +	int retval = 0;
> > +
> > +	while (max >= sizeof(u32)) {
> > +		if (!mtk_rng_wait_ready(rng, wait))
> > +			break;
> > +
> > +		*(u32 *)buf = readl(priv->base + RNG_DATA);
> > +		retval += sizeof(u32);
> > +		buf += sizeof(u32);
> > +		max -= sizeof(u32);
> > +	}
> > +
> > +	if (unlikely(wait && max))
> > +		dev_warn(priv->dev, "timeout might be not properly set\n");
> > +
> > +	return retval || !wait ? retval : -EIO;
> > +}
> > +
> > +static int mtk_rng_probe(struct platform_device *pdev)
> > +{
> > +	struct resource *res;
> > +	int ret;
> > +	struct mtk_rng *priv;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "no iomem resource\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > +	if (!priv)
> > +		return -ENOMEM;
> > +
> > +	priv->dev = &pdev->dev;
> > +	priv->rng.name = pdev->name;
> > +	priv->rng.init = mtk_rng_init;
> > +	priv->rng.cleanup = mtk_rng_cleanup;
> > +	priv->rng.read = mtk_rng_read;
> > +
> > +	priv->clk = devm_clk_get(&pdev->dev, "rng");
> > +	if (IS_ERR(priv->clk)) {
> > +		ret = PTR_ERR(priv->clk);
> > +		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> 
> You get that resource twice
> 
> Regards
> Corentin Labbe


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html