From: gregkh <gregkh@linuxfoundation.org>
To: Arnd Bergmann <arnd@arndb.de>
Cc: "kernelci.org bot" <bot@kernelci.org>,
kernel-build-reports@lists.linaro.org,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
linux-mips@linux-mips.org
Subject: Re: stable/linux-3.18.y build: 204 builds: 5 failed, 199 passed, 35 errors, 212 warnings (v3.18.49)
Date: Thu, 27 Apr 2017 16:28:22 +0200 [thread overview]
Message-ID: <20170427142822.GA19542@kroah.com> (raw)
In-Reply-To: <CAK8P3a3QsSMtc7AWjVjtM+tW8ARt1Ygw53=CSjgbG6Pvpq0QvQ@mail.gmail.com>
On Fri, Apr 21, 2017 at 04:27:14PM +0200, Arnd Bergmann wrote:
> On Thu, Apr 20, 2017 at 7:04 PM, kernelci.org bot <bot@kernelci.org> wrote:
> > efm32_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches
> >
> > Warnings:
> > arch/arm/kernel/head-nommu.S:167: Warning: Use of r13 as a source register
> > is deprecated when r15 is the destination register.
>
> 970d96f9a81b ("ARM: 8383/1: nommu: avoid deprecated source register on mov")
This doesn't apply to the 3.18-stable tree, and I don't know ARM
assembly good enough to backport it properly. Any hints?
> > imx_v6_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb'
> > may be used uninitialized in this function [-Wmaybe-uninitialized]
>
> 22f44150aad7 ("brcmfmac: avoid gcc-5.1 warning")
Applied.
> > ip27_defconfig (mips) — PASS, 0 errors, 6 warnings, 0 section mismatches
> >
> > Warnings:
> > lib/cpumask.c:194:25: warning: the address of 'cpu_all_bits' will always
> > evaluate as 'true' [-Waddress]
>
> f36963c9d3f6f4 cpumask_set_cpu_local_first => cpumask_local_spread, lament
Doesn't apply, and I couldn't figure out the backport :(
> > drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in
> > this function [-Wmaybe-uninitialized]
>
> a4f642a8a3c2 ("tty: nozomi: avoid a harmless gcc warning")
Applied to 3.18 and 4.4-stable, as it was missing in 4.4
> > drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning:
> > 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]
> > drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning:
> > 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
>
> 57e7c8cef224 ("net: vxge: avoid unused function warnings")
Applied.
> > ip32_defconfig (mips) — PASS, 0 errors, 2 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/misc/ioc4.c:194:16: warning: 'start' may be used uninitialized in
> > this function [-Wmaybe-uninitialized]
>
> 769105aa740d ("misc: ioc4: simplify wave period measurement in clock_calibrate")
Applied.
> > malta_defconfig (mips) — PASS, 0 errors, 3 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/net/wireless/hostap/hostap_hw.c:842:5: warning: 'rec' may be used
> > uninitialized in this function [-Wmaybe-uninitialized]
>
> 48dc5fb3ba53b2 hostap: avoid uninitialized variable use in hfa384x_get_rid
Applied to 4.4 and 3.18 trees.
> > msp71xx_defconfig (mips) — PASS, 0 errors, 3 warnings, 0 section mismatches
> >
> > Warnings:
> > arch/mips/pci/ops-pmcmsp.c:196:24: warning: 'bpci_lock' defined but not used
> > [-Wunused-variable]
>
> c4a305374bbf ("MIPS: MSP71xx: remove odd locking in PCI config space
> access code")
Applied.
> > mtx1_defconfig (mips) — PASS, 0 errors, 4 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning
> > Processor architecture undefined [-Wcpp]
>
> de92718883dd ("net: tulip: turn compile-time warning into dev_warn()")
Applied.
> > multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 3 warnings, 0
> > section mismatches
> >
> > Warnings:
> > drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer
> > of different size [-Wint-to-pointer-cast]
>
> d34712d2e3db ("mmc: sunxi: avoid invalid pointer calculation")
Applied.
> > nlm_xlp_defconfig (mips) — FAIL, 1 error, 3 warnings, 0 section mismatches
> >
> > Errors:
> > fs/gfs2/dir.c:768:9: warning: 'leaf_no' may be used uninitialized in this
> > function [-Wmaybe-uninitialized]
> > fs/gfs2/dir.c:987:8: warning: 'leaf_no' may be used uninitialized in this
> > function [-Wmaybe-uninitialized]
>
> 67893f12e537 ("gfs2: avoid uninitialized variable warning")
>
> (also needed on v4.4.y)
Applied to both.
> > fs/btrfs/extent_io.c:2166:13: warning: cast to pointer from integer of
> > different size [-Wint-to-pointer-cast]
>
> 6e1103a6e9b1 ("btrfs: fix state->private cast on 32 bit machines")
Applied.
> > realview-smp_defconfig
> >
> > Warnings:
> > arch/arm/mm/cache-l2x0.c:168:13: warning: 'l2x0_cache_sync' defined but not
> > used [-Wunused-function]
> > arch/arm/mm/cache-l2x0.c:185:13: warning: 'l2x0_flush_all' defined but not
> > used [-Wunused-function]
> > arch/arm/mm/cache-l2x0.c:195:13: warning: 'l2x0_disable' defined but not
> > used [-Wunused-function]
>
> 20e783e39e55 ARM: 8296/1: cache-l2x0: clean up aurora cache handling
Applied.
> > rm200_defconfig (mips) — FAIL, 0 errors, 5 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/scsi/aic94xx/aic94xx_sds.c:597:2: warning: 'offs' may be used
> > uninitialized in this function [-Wmaybe-uninitialized]
>
> 36dd5acd196574d4 aic94xx: Skip reading user settings if flash is not found
Applied.
> > arch/mips/boot/elf2ecoff.c:270:8: warning: variable 'shstrtab' set but not
> > used [-Wunused-but-set-variable]
>
> > Warnings:
> > arch/mips/ralink/prom.c:64:2: warning: 'argc' is used uninitialized in this
> > function [-Wuninitialized]
> > arch/mips/ralink/prom.c:64:2: warning: 'argv' is used uninitialized in this
> > function [-Wuninitialized]
>
> 9c48568b3692 ("MIPS: ralink: Cosmetic change to prom_init().")
Applied.
> > tinyconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches
> >
> > Warnings:
> > .config:807:warning: override: KERNEL_XZ changes choice state
> > .config:809:warning: override: SLOB changes choice state
>
> 236dec051078 ("kconfig: tinyconfig: provide whole choice blocks to
> avoid warnings")
Applied.
Thanks so much for the list, I think I'm all caught up now, hopefully
the next release will have almost no warnings.
greg k-h
WARNING: multiple messages have this Message-ID (diff)
From: gregkh@linuxfoundation.org (gregkh)
To: linux-arm-kernel@lists.infradead.org
Subject: stable/linux-3.18.y build: 204 builds: 5 failed, 199 passed, 35 errors, 212 warnings (v3.18.49)
Date: Thu, 27 Apr 2017 16:28:22 +0200 [thread overview]
Message-ID: <20170427142822.GA19542@kroah.com> (raw)
In-Reply-To: <CAK8P3a3QsSMtc7AWjVjtM+tW8ARt1Ygw53=CSjgbG6Pvpq0QvQ@mail.gmail.com>
On Fri, Apr 21, 2017 at 04:27:14PM +0200, Arnd Bergmann wrote:
> On Thu, Apr 20, 2017 at 7:04 PM, kernelci.org bot <bot@kernelci.org> wrote:
> > efm32_defconfig (arm) ? PASS, 0 errors, 1 warning, 0 section mismatches
> >
> > Warnings:
> > arch/arm/kernel/head-nommu.S:167: Warning: Use of r13 as a source register
> > is deprecated when r15 is the destination register.
>
> 970d96f9a81b ("ARM: 8383/1: nommu: avoid deprecated source register on mov")
This doesn't apply to the 3.18-stable tree, and I don't know ARM
assembly good enough to backport it properly. Any hints?
> > imx_v6_v7_defconfig (arm) ? PASS, 0 errors, 2 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb'
> > may be used uninitialized in this function [-Wmaybe-uninitialized]
>
> 22f44150aad7 ("brcmfmac: avoid gcc-5.1 warning")
Applied.
> > ip27_defconfig (mips) ? PASS, 0 errors, 6 warnings, 0 section mismatches
> >
> > Warnings:
> > lib/cpumask.c:194:25: warning: the address of 'cpu_all_bits' will always
> > evaluate as 'true' [-Waddress]
>
> f36963c9d3f6f4 cpumask_set_cpu_local_first => cpumask_local_spread, lament
Doesn't apply, and I couldn't figure out the backport :(
> > drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in
> > this function [-Wmaybe-uninitialized]
>
> a4f642a8a3c2 ("tty: nozomi: avoid a harmless gcc warning")
Applied to 3.18 and 4.4-stable, as it was missing in 4.4
> > drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning:
> > 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]
> > drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning:
> > 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
>
> 57e7c8cef224 ("net: vxge: avoid unused function warnings")
Applied.
> > ip32_defconfig (mips) ? PASS, 0 errors, 2 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/misc/ioc4.c:194:16: warning: 'start' may be used uninitialized in
> > this function [-Wmaybe-uninitialized]
>
> 769105aa740d ("misc: ioc4: simplify wave period measurement in clock_calibrate")
Applied.
> > malta_defconfig (mips) ? PASS, 0 errors, 3 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/net/wireless/hostap/hostap_hw.c:842:5: warning: 'rec' may be used
> > uninitialized in this function [-Wmaybe-uninitialized]
>
> 48dc5fb3ba53b2 hostap: avoid uninitialized variable use in hfa384x_get_rid
Applied to 4.4 and 3.18 trees.
> > msp71xx_defconfig (mips) ? PASS, 0 errors, 3 warnings, 0 section mismatches
> >
> > Warnings:
> > arch/mips/pci/ops-pmcmsp.c:196:24: warning: 'bpci_lock' defined but not used
> > [-Wunused-variable]
>
> c4a305374bbf ("MIPS: MSP71xx: remove odd locking in PCI config space
> access code")
Applied.
> > mtx1_defconfig (mips) ? PASS, 0 errors, 4 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning
> > Processor architecture undefined [-Wcpp]
>
> de92718883dd ("net: tulip: turn compile-time warning into dev_warn()")
Applied.
> > multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) ? PASS, 0 errors, 3 warnings, 0
> > section mismatches
> >
> > Warnings:
> > drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer
> > of different size [-Wint-to-pointer-cast]
>
> d34712d2e3db ("mmc: sunxi: avoid invalid pointer calculation")
Applied.
> > nlm_xlp_defconfig (mips) ? FAIL, 1 error, 3 warnings, 0 section mismatches
> >
> > Errors:
> > fs/gfs2/dir.c:768:9: warning: 'leaf_no' may be used uninitialized in this
> > function [-Wmaybe-uninitialized]
> > fs/gfs2/dir.c:987:8: warning: 'leaf_no' may be used uninitialized in this
> > function [-Wmaybe-uninitialized]
>
> 67893f12e537 ("gfs2: avoid uninitialized variable warning")
>
> (also needed on v4.4.y)
Applied to both.
> > fs/btrfs/extent_io.c:2166:13: warning: cast to pointer from integer of
> > different size [-Wint-to-pointer-cast]
>
> 6e1103a6e9b1 ("btrfs: fix state->private cast on 32 bit machines")
Applied.
> > realview-smp_defconfig
> >
> > Warnings:
> > arch/arm/mm/cache-l2x0.c:168:13: warning: 'l2x0_cache_sync' defined but not
> > used [-Wunused-function]
> > arch/arm/mm/cache-l2x0.c:185:13: warning: 'l2x0_flush_all' defined but not
> > used [-Wunused-function]
> > arch/arm/mm/cache-l2x0.c:195:13: warning: 'l2x0_disable' defined but not
> > used [-Wunused-function]
>
> 20e783e39e55 ARM: 8296/1: cache-l2x0: clean up aurora cache handling
Applied.
> > rm200_defconfig (mips) ? FAIL, 0 errors, 5 warnings, 0 section mismatches
> >
> > Warnings:
> > drivers/scsi/aic94xx/aic94xx_sds.c:597:2: warning: 'offs' may be used
> > uninitialized in this function [-Wmaybe-uninitialized]
>
> 36dd5acd196574d4 aic94xx: Skip reading user settings if flash is not found
Applied.
> > arch/mips/boot/elf2ecoff.c:270:8: warning: variable 'shstrtab' set but not
> > used [-Wunused-but-set-variable]
>
> > Warnings:
> > arch/mips/ralink/prom.c:64:2: warning: 'argc' is used uninitialized in this
> > function [-Wuninitialized]
> > arch/mips/ralink/prom.c:64:2: warning: 'argv' is used uninitialized in this
> > function [-Wuninitialized]
>
> 9c48568b3692 ("MIPS: ralink: Cosmetic change to prom_init().")
Applied.
> > tinyconfig (arm) ? PASS, 0 errors, 3 warnings, 0 section mismatches
> >
> > Warnings:
> > .config:807:warning: override: KERNEL_XZ changes choice state
> > .config:809:warning: override: SLOB changes choice state
>
> 236dec051078 ("kconfig: tinyconfig: provide whole choice blocks to
> avoid warnings")
Applied.
Thanks so much for the list, I think I'm all caught up now, hopefully
the next release will have almost no warnings.
greg k-h
next prev parent reply other threads:[~2017-04-27 14:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <58f8ea00.84621c0a.da7d6.1c19@mx.google.com>
2017-04-21 14:27 ` stable/linux-3.18.y build: 204 builds: 5 failed, 199 passed, 35 errors, 212 warnings (v3.18.49) Arnd Bergmann
2017-04-21 14:27 ` Arnd Bergmann
2017-04-21 14:59 ` Mark Brown
2017-04-21 14:59 ` Mark Brown
2017-04-21 16:17 ` Arnd Bergmann
2017-04-21 16:17 ` Arnd Bergmann
2017-04-27 10:33 ` gregkh
2017-04-27 10:33 ` gregkh
2017-04-27 11:40 ` Arnd Bergmann
2017-04-27 11:40 ` Arnd Bergmann
2017-04-27 14:04 ` gregkh
2017-04-27 14:04 ` gregkh
2017-04-27 14:28 ` gregkh [this message]
2017-04-27 14:28 ` gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170427142822.GA19542@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=arnd@arndb.de \
--cc=bot@kernelci.org \
--cc=kernel-build-reports@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.