Re: [PATCH iproute2 net 0/8] tc/act_pedit: Support offset relative to conventional header

[Stephen Hemminger <stephen@networkplumber.org>]

On Sun, 23 Apr 2017 15:53:48 +0300
Amir Vadai <amir@vadai.me> wrote:

> Hi Stephen,
> 
> This patchset extends pedit to support modifying a field in an offset relative
> to the conventional network headers (kenrel support was added [1] in 4.11 rc1).
> Without the extended pedit, user could specify fields in TCP and ICMP headers,
> but the kernel code was using an offset relative to the begining of the IP
> header. This will break if IP header length is greater than the minimal value
> of 20, or if L3 is not IPv4.
> 
> It also introduces support in manipulating ETH, TCP, UDP and IP.ttl fields and
> a new command to increase/decrease the value of a field (current use case is IP.ttl).
> 
> Since there might be deployments already using pedit, special consideration was
> taken, not to break those scripts - only by specifying the special keyword
> 'ex', the extended capabilities are available, thus there should be no impact
> on existing scripts.
> Also, the new code can live together with rules added by the old code. It
> supports both the old netlink and the new one.
> 
> This patchset is against the master and not net-next as the functionality was
> added in 4.11
> 
> Thanks,
> Amir
> 
> [1] - 71d0ed7079df ("net/act_pedit: Support using offset relative to the
>                      conventional network headers")
> 
> Amir Vadai (7):
>   tc/pedit: Fix a typo in pedit usage message
>   tc/pedit: Extend pedit to specify offset relative to mac/transport
>     headers
>   tc/pedit: Introduce 'add' operation
>   tc/pedit: p_ip: introduce editing ttl header
>   tc/pedit: Support fields bigger than 32 bits
>   tc/pedit: p_eth: ETH header editor
>   tc/pedit: p_tcp: introduce pedit tcp support
> 
> Or Gerlitz (1):
>   tc/pedit: p_udp: introduce pedit udp support
> 
>  man/man8/tc-pedit.8 | 126 +++++++++++++++++++++--
>  tc/Makefile         |   1 +
>  tc/m_pedit.c        | 290 ++++++++++++++++++++++++++++++++++++++++++++++------
>  tc/m_pedit.h        |  44 ++++++--
>  tc/p_eth.c          |  72 +++++++++++++
>  tc/p_icmp.c         |   3 +-
>  tc/p_ip.c           |  21 +++-
>  tc/p_tcp.c          |  40 +++++++-
>  tc/p_udp.c          |  30 +++++-
>  9 files changed, 572 insertions(+), 55 deletions(-)
>  create mode 100644 tc/p_eth.c
> 

Applied. Then I cleaned up long lines