From: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Borislav Petkov <bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org>
Cc: Bhupesh Sharma <bhsharma-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Matt Fleming
<matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Dave Young <dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Ard Biesheuvel
<ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Ingo Molnar <mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
"H. Peter Anvin" <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>,
Thomas Garnier <thgarnie-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Kees Cook <keescook-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Alex Thorlton <athorlton-sJ/iWh9BUns@public.gmane.org>,
Russ Anderson <rja-sJ/iWh9BUns@public.gmane.org>,
Dimitri Sivanich <sivanich-sJ/iWh9BUns@public.gmane.org>,
Mike Travis <travis-sJ/iWh9BUns@public.gmane.org>
Subject: Re: [PATCH v2] x86/efi: Correct ident mapping of efi old_map when kalsr enabled
Date: Tue, 9 May 2017 11:30:51 +0800 [thread overview]
Message-ID: <20170509033051.GD21870@x1> (raw)
In-Reply-To: <20170508152514.mc5j3lrhntd3qodj-fF5Pk5pvG8Y@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1945 bytes --]
On 05/08/17 at 05:25pm, Borislav Petkov wrote:
> On Mon, May 08, 2017 at 09:36:49AM +0800, Baoquan He wrote:
> > Thanks for explaining, Bhupesh.
> >
> > BIOS issue of SGI uv1 is still not fixed. There's a quirk for uv1 to
> > use efi old map:
> >
> > void __init efi_apply_memmap_quirks(void)
> > {
> > ...
> > ...
> > /* UV2+ BIOS has a fix for this issue. UV1 still needs the quirk. */
> > if (dmi_check_system(sgi_uv1_dmi))
> > set_bit(EFI_OLD_MEMMAP, &efi.flags);
> > }
> >
> > And because of some reasons, redhat also need efi old_map now.
> >
> > Hi Matt,
> >
> > This v2 patch works on my kvm guest, however there's still problem on
> > SGI system. I will post v3 later after it's handled. So nack this v2
> > patch.
>
> Please do not top-post, you should know better.
>
> Can you apply this debug patch and upload full dmesg?
Please check the attachment.
>
> ---
> diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
> index c488625c9712..ca9df6283040 100644
> --- a/arch/x86/platform/efi/efi_64.c
> +++ b/arch/x86/platform/efi/efi_64.c
> @@ -88,9 +88,18 @@ pgd_t * __init efi_call_phys_prolog(void)
> n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
> save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
>
> + pr_info("%s: PAGE_OFFSET: 0x%lx\n", __func__, PAGE_OFFSET);
> +
> for (pgd = 0; pgd < n_pgds; pgd++) {
> save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
> vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
> +
> + pr_info("%s: pgd: 0x%x: va: 0x%lx, 0x%lx -> 0x%lx\n",
> + __func__, pgd,
> + vaddress,
> + pgd_val(*pgd_offset_k(pgd * PGDIR_SIZE)),
> + pgd_val(*pgd_offset_k(vaddress)));
> +
> set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
> }
> out:
> ---
>
> Thanks.
>
> --
> Regards/Gruss,
> Boris.
>
> Good mailing practices for 400: avoid top-posting and trim the reply.
[-- Attachment #2: debug_for_boris.log --]
[-- Type: text/plain, Size: 39283 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0xb00001d, date = 2016-06-06
[ 0.000000] Linux version 4.11.0+ (root-Je4m6I2aeZBG4dQ6rZ5bwQ9Y35r+6HzyY23lVrIENng@public.gmane.org.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-14) (GCC) ) #8 SMP Mon May 8 20:59:49 EDT 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0+ root=/dev/mapper/rhel_sgi--uv300--03-root ro add_efi_memmap earlyprintk=ttyS0,115200n8 intel_idle.max_cstate=1 loglevel=9 nmi_watchdog=0 nobau processor.max_cstate=1 crashkernel=auto rd.lvm.lv=rhel_sgi-uv300-03/root rd.lvm.lv=rhel_sgi-uv300-03/swap console=ttyS0,115200n8 LANG=en_US.UTF-8 efi=old_map efi=debug
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000051fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000052000-0x000000000005afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000005b000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072829fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007282a000-0x000000007282afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007282b000-0x0000000072837fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072838000-0x0000000072a77fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000072a78000-0x00000000751fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000751ff000-0x0000000075efefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075eff000-0x0000000076efefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000076eff000-0x0000000076ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000076fff000-0x000000007effffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000001effffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000002000000000-0x000000207fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000004000000000-0x0000005efeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000008000000000-0x0000009efeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000c000000000-0x000000defeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000ff800000000-0x00000ff803dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff803f00000-0x00000ff803ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff807f00000-0x00000ff807ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff80bf00000-0x00000ff80bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff80ff00000-0x00000ff80fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa00000000-0x00000ffa02ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa04000000-0x00000ffa06ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa08000000-0x00000ffa0affffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa0c000000-0x00000ffa0effffff] reserved
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x73bf1018-0x73c05c57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000051fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000052000-0x000000000005afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000005b000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000072829fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007282a000-0x000000007282afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007282b000-0x0000000072837fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000072838000-0x0000000072a77fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000072a78000-0x0000000073bf1017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073bf1018-0x0000000073c05c57] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073c05c58-0x00000000751fefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000751ff000-0x0000000075efefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000075eff000-0x0000000076efefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000076eff000-0x0000000076ffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000076fff000-0x000000007effffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000001effffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000002000000000-0x000000207fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000004000000000-0x0000005efeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000008000000000-0x0000009efeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000c000000000-0x000000defeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000ff800000000-0x00000ff803dfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff803f00000-0x00000ff803ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff807f00000-0x00000ff807ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff80bf00000-0x00000ff80bffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff80ff00000-0x00000ff80fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa00000000-0x00000ffa02ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa04000000-0x00000ffa06ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa08000000-0x00000ffa0affffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa0c000000-0x00000ffa0effffff] reserved
[ 0.000000] efi: EFI v2.40 by EDK II
[ 0.000000] BIOS ID: 0 BIOS ID:\x02
[ 0.000000] efi: SMBIOS=0x753f0000 ACPI=0x76ffe000 ACPI 2.0=0x76ffe014 UVsystab=0x753e5000
[ 0.000000] efi: mem00: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000000fff] (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000001fff] (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000002000-0x0000000000051fff] (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000052000-0x000000000005afff] (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000000005b000-0x000000000009ffff] (0MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000ffffff] (15MB)
[ 0.000000] efi: mem06: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x00000000024c5fff] (20MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x00000000024c6000-0x000000003d464fff] (943MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000003d465000-0x000000003fffffff] (43MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000040000000-0x0000000045c73fff] (92MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000045c74000-0x00000000601fffff] (421MB)
[ 0.000000] efi: mem11: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000060200000-0x000000006027ffff] (0MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000060280000-0x0000000062764fff] (36MB)
[ 0.000000] efi: mem13: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000062765000-0x0000000072829fff] (256MB)
[ 0.000000] efi: mem14: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000007282a000-0x000000007282afff] (0MB)
[ 0.000000] efi: mem15: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007282b000-0x0000000072837fff] (0MB)
[ 0.000000] efi: mem16: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000072838000-0x0000000072a77fff] (2MB)
[ 0.000000] efi: mem17: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000072a78000-0x00000000739fafff] (15MB)
[ 0.000000] efi: mem18: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x00000000739fb000-0x00000000739fbfff] (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x00000000739fc000-0x0000000073bf0fff] (1MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000073bf1000-0x0000000073dfefff] (2MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000073dff000-0x00000000740acfff] (2MB)
[ 0.000000] efi: mem22: [Loader Code | | | | | | | | |WB|WT|WC|UC] range=[0x00000000740ad000-0x00000000741fefff] (1MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x00000000741ff000-0x0000000074a72fff] (8MB)
[ 0.000000] efi: mem24: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x0000000074a73000-0x00000000751fefff] (7MB)
[ 0.000000] efi: mem25: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000751ff000-0x00000000755fefff] (4MB)
[ 0.000000] efi: mem26: [Runtime Code |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000755ff000-0x0000000075dfefff] (8MB)
[ 0.000000] efi: mem27: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000075dff000-0x0000000075efefff] (1MB)
[ 0.000000] efi: mem28: [ACPI Memory NVS | | | | | | | | |WB|WT|WC|UC] range=[0x0000000075eff000-0x0000000076efefff] (16MB)
[ 0.000000] efi: mem29: [ACPI Reclaim Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000076eff000-0x0000000076ffefff] (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000076fff000-0x000000007d302fff] (99MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d303000-0x000000007d303fff] (0MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000007d304000-0x000000007d324fff] (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d325000-0x000000007effffff] (28MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x0000001effffffff] (122880MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000002000000000-0x000000207fffffff] (2048MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000004000000000-0x0000005efeffffff] (126960MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000008000000000-0x0000009efeffffff] (126960MB)
[ 0.000000] efi: mem38: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000c000000000-0x000000defeffffff] (126960MB)
[ 0.000000] efi: mem39: [Memory Mapped I/O |RUN| | | | | | | | | | | ] range=[0x0000000080000000-0x000000008fffffff] (256MB)
[ 0.000000] efi: mem40: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000000f8000000-0x00000000fbffffff] (64MB)
[ 0.000000] efi: mem41: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff800000000-0x00000ff803dfffff] (62MB)
[ 0.000000] efi: mem42: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff803f00000-0x00000ff803ffffff] (1MB)
[ 0.000000] efi: mem43: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff807f00000-0x00000ff807ffffff] (1MB)
[ 0.000000] efi: mem44: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80bf00000-0x00000ff80bffffff] (1MB)
[ 0.000000] efi: mem45: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80ff00000-0x00000ff80fffffff] (1MB)
[ 0.000000] efi: mem46: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa00000000-0x00000ffa02ffffff] (48MB)
[ 0.000000] efi: mem47: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa04000000-0x00000ffa06ffffff] (48MB)
[ 0.000000] efi: mem48: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa08000000-0x00000ffa0affffff] (48MB)
[ 0.000000] efi: mem49: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa0c000000-0x00000ffa0effffff] (48MB)
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xdeff000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable
[ 0.000000] 1 base 0FF800000000 mask 3FF800000000 uncachable
[ 0.000000] 2 base 100000000000 mask 300000000000 uncachable
[ 0.000000] 3 base 00007F800000 mask 3FFFFFC00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
Memory KASLR using RDRAND RDTSC...
[ 0.000000] e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff9469c0099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x93e1488000, 0x93e1488fff] PGTABLE
[ 0.000000] BRK [0x93e1489000, 0x93e1489fff] PGTABLE
[ 0.000000] BRK [0x93e148a000, 0x93e148afff] PGTABLE
[ 0.000000] BRK [0x93e148b000, 0x93e148bfff] PGTABLE
[ 0.000000] BRK [0x93e148c000, 0x93e148cfff] PGTABLE
[ 0.000000] BRK [0x93e148d000, 0x93e148dfff] PGTABLE
[ 0.000000] BRK [0x93e148e000, 0x93e148efff] PGTABLE
[ 0.000000] BRK [0x93e148f000, 0x93e148ffff] PGTABLE
[ 0.000000] BRK [0x93e1490000, 0x93e1490fff] PGTABLE
[ 0.000000] BRK [0x93e1491000, 0x93e1491fff] PGTABLE
[ 0.000000] BRK [0x93e1492000, 0x93e1492fff] PGTABLE
[ 0.000000] BRK [0x93e1493000, 0x93e1493fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x3d465000-0x3fffafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000076FFE014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x0000000076FFD0E8 000074 (v01 INTEL TIANO 00000000 01000013)
[ 0.000000] ACPI: FACP 0x0000000076FFC000 0000F4 (v04 INTEL TIANO 00000000 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x0000000076FF3000 007857 (v02 INTEL TIANO 00000003 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x0000000076EFA000 000040
[ 0.000000] ACPI: UEFI 0x0000000076EFC000 00005C (v01 INTEL RstSataV 00000000 00000000)
[ 0.000000] ACPI: HPET 0x0000000076FFB000 000038 (v01 INTEL TIANO 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIT 0x0000000076FF1000 00003C (v01 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: APIC 0x0000000076FEF000 000458 (v03 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: SRAT 0x0000000076FED000 000CF8 (v03 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x0000000076FBF000 02D367 (v02 SGI3X UVL 00000002 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x0000000076FBE000 00007C (v01 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: SPCR 0x0000000076FBD000 000050 (v01 00000000 00000000)
[ 0.000000] ACPI: DMAR 0x0000000076FBC000 0000C4 (v01 INTEL TIANO 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] UV: rev:1 part#:9578 nodeid:0000 n_skt:7 pnmsk:7f pn:0
[ 0.000000] UV: apicid_shift:0 apicid_mask:0x1f
[ 0.000000] UV: socketid_shift:5 pnode_mask:0x7f
[ 0.000000] UV: OEM IDs SGI3X/UVL, System/HUB Types 1/6, uv_apic 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0000 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0002 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000e -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0010 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0012 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0014 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0016 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0018 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001e -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x0020 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0022 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0024 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0026 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0028 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002e -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0030 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0032 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0034 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0036 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0038 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003e -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 0x0040 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0042 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0044 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0046 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0048 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004a -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004c -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004e -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0050 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0052 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0054 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0056 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0058 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005a -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005c -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005e -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 0x0060 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0062 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0064 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0066 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0068 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006a -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006c -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006e -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0070 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0072 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0074 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0076 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0078 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007a -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007c -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007e -> Node 3
[ 0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000d -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000f -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0011 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0013 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0015 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0017 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0019 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001d -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001f -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x0021 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0023 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0025 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0027 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0029 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002d -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002f -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0031 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0033 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0035 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0037 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0039 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003d -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003f -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 0x0041 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0043 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0045 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0047 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0049 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004b -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004d -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004f -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0051 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0053 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0055 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0057 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0059 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005b -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005d -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005f -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 0x0061 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0063 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0065 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0067 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0069 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006b -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006d -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006f -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0071 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0073 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0075 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0077 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0079 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007b -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007d -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007f -> Node 3
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x4000000000-0x5fffffffff]
[ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x8000000000-0x9fffffffff]
[ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0xc000000000-0xdfffffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=4
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x207ffd5000-0x207fffffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x5efefd5000-0x5efeffffff]
[ 0.000000] NODE_DATA(2) allocated [mem 0x9efefd5000-0x9efeffffff]
[ 0.000000] NODE_DATA(3) allocated [mem 0xdefefd2000-0xdefeffcfff]
[ 0.000000] kexec_core: crashkernel: memory value expected
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000defeffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000051fff]
[ 0.000000] node 0: [mem 0x000000000005b000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000072829fff]
[ 0.000000] node 0: [mem 0x000000007282b000-0x0000000072837fff]
[ 0.000000] node 0: [mem 0x0000000072a78000-0x00000000751fefff]
[ 0.000000] node 0: [mem 0x0000000076fff000-0x000000007effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000001effffffff]
[ 0.000000] node 0: [mem 0x0000002000000000-0x000000207fffffff]
[ 0.000000] node 1: [mem 0x0000004000000000-0x0000005efeffffff]
[ 0.000000] node 2: [mem 0x0000008000000000-0x0000009efeffffff]
[ 0.000000] node 3: [mem 0x000000c000000000-0x000000defeffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff]
[ 0.000000] On node 0 totalpages: 32493397
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7935 pages used for memmap
[ 0.000000] DMA32 zone: 507839 pages, LIFO batch:31
[ 0.000000] Normal zone: 516096 pages used for memmap
[ 0.000000] Normal zone: 31981568 pages, LIFO batch:31
[ 0.000000] Initmem setup node 1 [mem 0x0000004000000000-0x0000005efeffffff]
[ 0.000000] On node 1 totalpages: 32501760
[ 0.000000] Normal zone: 507840 pages used for memmap
[ 0.000000] Normal zone: 32501760 pages, LIFO batch:31
[ 0.000000] Initmem setup node 2 [mem 0x0000008000000000-0x0000009efeffffff]
[ 0.000000] On node 2 totalpages: 32501760
[ 0.000000] Normal zone: 507840 pages used for memmap
[ 0.000000] Normal zone: 32501760 pages, LIFO batch:31
[ 0.000000] Initmem setup node 3 [mem 0x000000c000000000-0x000000defeffffff]
[ 0.000000] On node 3 totalpages: 32501760
[ 0.000000] Normal zone: 507840 pages used for memmap
[ 0.000000] Normal zone: 32501760 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_TYPE_RESERVED
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] UV: rev:1 part#:9578 nodeid:0000 n_skt:7 pnmsk:7f pn:0
[ 0.000000] UV: apicid_shift:0 apicid_mask:0x1f
[ 0.000000] UV: socketid_shift:5 pnode_mask:0x7f
[ 0.000000] UV: OEM IDs SGI3X/UVL, System/HUB Types 1/6, uv_apic 0
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 128 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00052000-0x0005afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7282a000-0x7282afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72838000-0x72a77fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73bf1000-0x73bf1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73c05000-0x73c05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x751ff000-0x75efefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75eff000-0x76efefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76eff000-0x76ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f00000000-0x1fffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x2080000000-0x3fffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5eff000000-0x7fffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9eff000000-0xbfffffffff]
[ 0.000000] e820: [mem 0x90000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:4
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff9489c3600000 s116376 r8192 d31080 u262144
[ 0.000000] pcpu-alloc: s116376 r8192 d31080 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007
[ 0.000000] pcpu-alloc: [0] 008 009 010 011 012 013 014 015
[ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071
[ 0.000000] pcpu-alloc: [0] 072 073 074 075 076 077 078 079
[ 0.000000] pcpu-alloc: [1] 016 017 018 019 020 021 022 023
[ 0.000000] pcpu-alloc: [1] 024 025 026 027 028 029 030 031
[ 0.000000] pcpu-alloc: [1] 080 081 082 083 084 085 086 087
[ 0.000000] pcpu-alloc: [1] 088 089 090 091 092 093 094 095
[ 0.000000] pcpu-alloc: [2] 032 033 034 035 036 037 038 039
[ 0.000000] pcpu-alloc: [2] 040 041 042 043 044 045 046 047
[ 0.000000] pcpu-alloc: [2] 096 097 098 099 100 101 102 103
[ 0.000000] pcpu-alloc: [2] 104 105 106 107 108 109 110 111
[ 0.000000] pcpu-alloc: [3] 048 049 050 051 052 053 054 055
[ 0.000000] pcpu-alloc: [3] 056 057 058 059 060 061 062 063
[ 0.000000] pcpu-alloc: [3] 112 113 114 115 116 117 118 119
[ 0.000000] pcpu-alloc: [3] 120 121 122 123 124 125 126 127
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 127951040
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0+ root=/dev/mapper/rhel_sgi--uv300--03-root ro add_efi_memmap earlyprintk=ttyS0,115200n8 intel_idle.max_cstate=1 loglevel=9 nmi_watchdog=0 nobau processor.max_cstate=1 crashkernel=auto rd.lvm.lv=rhel_sgi-uv300-03/root rd.lvm.lv=rhel_sgi-uv300-03/swap console=ttyS0,115200n8 LANG=en_US.UTF-8 efi=old_map efi=debug
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 10008884K/519994708K available (7546K kernel code, 1506K rwdata, 3336K rodata, 2160K init, 2920K bss, 8593352K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=4
[ 0.000000] ftrace: allocating 31399 entries in 123 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=128.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=128
[ 0.000000] NR_IRQS:524544 nr_irqs:1856 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2099.972 MHz processor
[ 0.003000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.94 BogoMIPS (lpj=2099972)
[ 0.004003] pid_max: default: 131072 minimum: 1024
[ 0.005129] ACPI: Core revision 20170119
[ 0.018125] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.019151] efi: EFI runtime memory map:
[ 0.020008] efi: mem00: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000060200000-0x000000006027ffff] (0MB)
[ 0.021003] efi: mem01: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000062765000-0x0000000072829fff] (256MB)
[ 0.022004] efi: mem02: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000007282a000-0x000000007282afff] (0MB)
[ 0.023003] efi: mem03: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007282b000-0x0000000072837fff] (0MB)
[ 0.024003] efi: mem04: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000072838000-0x0000000072a77fff] (2MB)
[ 0.025003] efi: mem05: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000072a78000-0x00000000739fafff] (15MB)
[ 0.026003] efi: mem06: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x00000000739fb000-0x00000000739fbfff] (0MB)
[ 0.027003] efi: mem07: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x0000000074a73000-0x00000000751fefff] (7MB)
[ 0.028003] efi: mem08: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000751ff000-0x00000000755fefff] (4MB)
[ 0.029003] efi: mem09: [Runtime Code |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000755ff000-0x0000000075dfefff] (8MB)
[ 0.030003] efi: mem10: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d303000-0x000000007d303fff] (0MB)
[ 0.031003] efi: mem11: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d325000-0x000000007effffff] (28MB)
[ 0.032003] efi: mem12: [Memory Mapped I/O |RUN| | | | | | | | | | | ] range=[0x0000000080000000-0x000000008fffffff] (256MB)
[ 0.033003] efi: mem13: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000000f8000000-0x00000000fbffffff] (64MB)
[ 0.034003] efi: mem14: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff800000000-0x00000ff803dfffff] (62MB)
[ 0.035003] efi: mem15: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff803f00000-0x00000ff803ffffff] (1MB)
[ 0.036003] efi: mem16: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff807f00000-0x00000ff807ffffff] (1MB)
[ 0.037003] efi: mem17: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80bf00000-0x00000ff80bffffff] (1MB)
[ 0.038003] efi: mem18: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80ff00000-0x00000ff80fffffff] (1MB)
[ 0.039003] efi: mem19: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa00000000-0x00000ffa02ffffff] (48MB)
[ 0.040003] efi: mem20: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa04000000-0x00000ffa06ffffff] (48MB)
[ 0.041003] efi: mem21: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa08000000-0x00000ffa0affffff] (48MB)
[ 0.042003] efi: mem22: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa0c000000-0x00000ffa0effffff] (48MB)
[ 0.043139] efi: efi_call_phys_prolog: PAGE_OFFSET: 0xffff9469c0000000
[ 0.044003] efi: efi_call_phys_prolog: pgd: 0x0: va: 0xffff9469c0000000, 0x0 -> 0x93e1488067
[ 0.045002] efi: efi_call_phys_prolog: pgd: 0x1: va: 0xffff94e9c0000000, 0x0 -> 0xdefefff067
[ 0.046010] BUG: unable to handle kernel paging request at 0000000075dc4850
[ 0.047000] IP: 0x75dc4850
[ 0.047000] PGD 93e1488067
[ 0.047000] P4D 93e1488067
[ 0.047000] PUD 0
[ 0.047000]
[ 0.047000] Oops: 0010 [#1] SMP
[ 0.047000] Modules linked in:
[ 0.047000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0+ #8
[ 0.047000] Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016
[ 0.047000] task: ffffffff9a0104c0 task.stack: ffffffff9a000000
[ 0.047000] RIP: 0010:0x75dc4850
[ 0.047000] RSP: 0000:ffffffff9a003d98 EFLAGS: 00010086
[ 0.047000] RAX: ffff9548befcc000 RBX: 000000c07fc22000 RCX: 0000000000000450
[ 0.047000] RDX: 0000000000000030 RSI: 0000000000000450 RDI: 0000000075dc4850
[ 0.047000] RBP: ffffffff9a003e40 R08: 0000000000000001 R09: 000000c07fc22000
[ 0.047000] R10: 65647830203e2d20 R11: 3736306666666566 R12: 0000000000000030
[ 0.047000] R13: 0000000000000246 R14: ffff946b3fcb0ce0 R15: 0000000000000450
[ 0.047000] FS: 0000000000000000(0000) GS:ffff9489c3600000(0000) knlGS:0000000000000000
[ 0.047000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.047000] CR2: 0000000075dc4850 CR3: 00000093e0e09000 CR4: 00000000000406b0
[ 0.047000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.047000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 0.047000] Call Trace:
[ 0.047000] ? efi_call+0x58/0x90
[ 0.047000] ? vprintk_func+0x20/0x50
[ 0.047000] ? printk+0x58/0x6f
[ 0.047000] efi_enter_virtual_mode+0x3ca/0x512
[ 0.047000] start_kernel+0x424/0x4c8
[ 0.047000] ? set_init_arg+0x5a/0x5a
[ 0.047000] ? early_idt_handler_array+0x120/0x120
[ 0.047000] x86_64_start_reservations+0x29/0x2b
[ 0.047000] x86_64_start_kernel+0x151/0x174
[ 0.047000] secondary_startup_64+0x9f/0x9f
[ 0.047000] Code: Bad RIP value.
[ 0.047000] RIP: 0x75dc4850 RSP: ffffffff9a003d98
[ 0.047000] CR2: 0000000075dc4850
[ 0.047000] ---[ end trace 5f12edd1f8c1b98e ]---
[ 0.047000] Kernel panic - not syncing: Fatal exception
[ 0.047000] ---[ end Kernel panic - not syncing: Fatal exception
WARNING: multiple messages have this Message-ID (diff)
From: Baoquan He <bhe@redhat.com>
To: Borislav Petkov <bp@alien8.de>
Cc: Bhupesh Sharma <bhsharma@redhat.com>,
Matt Fleming <matt@codeblueprint.co.uk>,
linux-kernel@vger.kernel.org, Dave Young <dyoung@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Garnier <thgarnie@google.com>,
Kees Cook <keescook@chromium.org>,
x86@kernel.org, linux-efi@vger.kernel.org,
Alex Thorlton <athorlton@sgi.com>, Russ Anderson <rja@sgi.com>,
Dimitri Sivanich <sivanich@sgi.com>, Mike Travis <travis@sgi.com>
Subject: Re: [PATCH v2] x86/efi: Correct ident mapping of efi old_map when kalsr enabled
Date: Tue, 9 May 2017 11:30:51 +0800 [thread overview]
Message-ID: <20170509033051.GD21870@x1> (raw)
In-Reply-To: <20170508152514.mc5j3lrhntd3qodj@pd.tnic>
[-- Attachment #1: Type: text/plain, Size: 1945 bytes --]
On 05/08/17 at 05:25pm, Borislav Petkov wrote:
> On Mon, May 08, 2017 at 09:36:49AM +0800, Baoquan He wrote:
> > Thanks for explaining, Bhupesh.
> >
> > BIOS issue of SGI uv1 is still not fixed. There's a quirk for uv1 to
> > use efi old map:
> >
> > void __init efi_apply_memmap_quirks(void)
> > {
> > ...
> > ...
> > /* UV2+ BIOS has a fix for this issue. UV1 still needs the quirk. */
> > if (dmi_check_system(sgi_uv1_dmi))
> > set_bit(EFI_OLD_MEMMAP, &efi.flags);
> > }
> >
> > And because of some reasons, redhat also need efi old_map now.
> >
> > Hi Matt,
> >
> > This v2 patch works on my kvm guest, however there's still problem on
> > SGI system. I will post v3 later after it's handled. So nack this v2
> > patch.
>
> Please do not top-post, you should know better.
>
> Can you apply this debug patch and upload full dmesg?
Please check the attachment.
>
> ---
> diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
> index c488625c9712..ca9df6283040 100644
> --- a/arch/x86/platform/efi/efi_64.c
> +++ b/arch/x86/platform/efi/efi_64.c
> @@ -88,9 +88,18 @@ pgd_t * __init efi_call_phys_prolog(void)
> n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
> save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
>
> + pr_info("%s: PAGE_OFFSET: 0x%lx\n", __func__, PAGE_OFFSET);
> +
> for (pgd = 0; pgd < n_pgds; pgd++) {
> save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
> vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
> +
> + pr_info("%s: pgd: 0x%x: va: 0x%lx, 0x%lx -> 0x%lx\n",
> + __func__, pgd,
> + vaddress,
> + pgd_val(*pgd_offset_k(pgd * PGDIR_SIZE)),
> + pgd_val(*pgd_offset_k(vaddress)));
> +
> set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
> }
> out:
> ---
>
> Thanks.
>
> --
> Regards/Gruss,
> Boris.
>
> Good mailing practices for 400: avoid top-posting and trim the reply.
[-- Attachment #2: debug_for_boris.log --]
[-- Type: text/plain, Size: 39255 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0xb00001d, date = 2016-06-06
[ 0.000000] Linux version 4.11.0+ (root@sgi-uv300-03.rhts.eng.bos.redhat.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-14) (GCC) ) #8 SMP Mon May 8 20:59:49 EDT 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0+ root=/dev/mapper/rhel_sgi--uv300--03-root ro add_efi_memmap earlyprintk=ttyS0,115200n8 intel_idle.max_cstate=1 loglevel=9 nmi_watchdog=0 nobau processor.max_cstate=1 crashkernel=auto rd.lvm.lv=rhel_sgi-uv300-03/root rd.lvm.lv=rhel_sgi-uv300-03/swap console=ttyS0,115200n8 LANG=en_US.UTF-8 efi=old_map efi=debug
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000051fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000052000-0x000000000005afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000005b000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072829fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007282a000-0x000000007282afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007282b000-0x0000000072837fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072838000-0x0000000072a77fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000072a78000-0x00000000751fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000751ff000-0x0000000075efefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075eff000-0x0000000076efefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000076eff000-0x0000000076ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000076fff000-0x000000007effffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000001effffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000002000000000-0x000000207fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000004000000000-0x0000005efeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000008000000000-0x0000009efeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000c000000000-0x000000defeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000ff800000000-0x00000ff803dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff803f00000-0x00000ff803ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff807f00000-0x00000ff807ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff80bf00000-0x00000ff80bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ff80ff00000-0x00000ff80fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa00000000-0x00000ffa02ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa04000000-0x00000ffa06ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa08000000-0x00000ffa0affffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000ffa0c000000-0x00000ffa0effffff] reserved
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x73bf1018-0x73c05c57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000051fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000052000-0x000000000005afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000005b000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000072829fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007282a000-0x000000007282afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007282b000-0x0000000072837fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000072838000-0x0000000072a77fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000072a78000-0x0000000073bf1017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073bf1018-0x0000000073c05c57] usable
[ 0.000000] reserve setup_data: [mem 0x0000000073c05c58-0x00000000751fefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000751ff000-0x0000000075efefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000075eff000-0x0000000076efefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000076eff000-0x0000000076ffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000076fff000-0x000000007effffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000001effffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000002000000000-0x000000207fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000004000000000-0x0000005efeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000008000000000-0x0000009efeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000c000000000-0x000000defeffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000ff800000000-0x00000ff803dfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff803f00000-0x00000ff803ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff807f00000-0x00000ff807ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff80bf00000-0x00000ff80bffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ff80ff00000-0x00000ff80fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa00000000-0x00000ffa02ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa04000000-0x00000ffa06ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa08000000-0x00000ffa0affffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000ffa0c000000-0x00000ffa0effffff] reserved
[ 0.000000] efi: EFI v2.40 by EDK II
[ 0.000000] BIOS ID: 0 BIOS ID:\x02
[ 0.000000] efi: SMBIOS=0x753f0000 ACPI=0x76ffe000 ACPI 2.0=0x76ffe014 UVsystab=0x753e5000
[ 0.000000] efi: mem00: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000000fff] (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000001fff] (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000002000-0x0000000000051fff] (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000052000-0x000000000005afff] (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000000005b000-0x000000000009ffff] (0MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000ffffff] (15MB)
[ 0.000000] efi: mem06: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x00000000024c5fff] (20MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x00000000024c6000-0x000000003d464fff] (943MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000003d465000-0x000000003fffffff] (43MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000040000000-0x0000000045c73fff] (92MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000045c74000-0x00000000601fffff] (421MB)
[ 0.000000] efi: mem11: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000060200000-0x000000006027ffff] (0MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000060280000-0x0000000062764fff] (36MB)
[ 0.000000] efi: mem13: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000062765000-0x0000000072829fff] (256MB)
[ 0.000000] efi: mem14: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000007282a000-0x000000007282afff] (0MB)
[ 0.000000] efi: mem15: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007282b000-0x0000000072837fff] (0MB)
[ 0.000000] efi: mem16: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000072838000-0x0000000072a77fff] (2MB)
[ 0.000000] efi: mem17: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000072a78000-0x00000000739fafff] (15MB)
[ 0.000000] efi: mem18: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x00000000739fb000-0x00000000739fbfff] (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x00000000739fc000-0x0000000073bf0fff] (1MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000073bf1000-0x0000000073dfefff] (2MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000073dff000-0x00000000740acfff] (2MB)
[ 0.000000] efi: mem22: [Loader Code | | | | | | | | |WB|WT|WC|UC] range=[0x00000000740ad000-0x00000000741fefff] (1MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x00000000741ff000-0x0000000074a72fff] (8MB)
[ 0.000000] efi: mem24: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x0000000074a73000-0x00000000751fefff] (7MB)
[ 0.000000] efi: mem25: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000751ff000-0x00000000755fefff] (4MB)
[ 0.000000] efi: mem26: [Runtime Code |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000755ff000-0x0000000075dfefff] (8MB)
[ 0.000000] efi: mem27: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000075dff000-0x0000000075efefff] (1MB)
[ 0.000000] efi: mem28: [ACPI Memory NVS | | | | | | | | |WB|WT|WC|UC] range=[0x0000000075eff000-0x0000000076efefff] (16MB)
[ 0.000000] efi: mem29: [ACPI Reclaim Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000076eff000-0x0000000076ffefff] (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000076fff000-0x000000007d302fff] (99MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d303000-0x000000007d303fff] (0MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000007d304000-0x000000007d324fff] (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d325000-0x000000007effffff] (28MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x0000001effffffff] (122880MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000002000000000-0x000000207fffffff] (2048MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000004000000000-0x0000005efeffffff] (126960MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000008000000000-0x0000009efeffffff] (126960MB)
[ 0.000000] efi: mem38: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000c000000000-0x000000defeffffff] (126960MB)
[ 0.000000] efi: mem39: [Memory Mapped I/O |RUN| | | | | | | | | | | ] range=[0x0000000080000000-0x000000008fffffff] (256MB)
[ 0.000000] efi: mem40: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000000f8000000-0x00000000fbffffff] (64MB)
[ 0.000000] efi: mem41: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff800000000-0x00000ff803dfffff] (62MB)
[ 0.000000] efi: mem42: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff803f00000-0x00000ff803ffffff] (1MB)
[ 0.000000] efi: mem43: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff807f00000-0x00000ff807ffffff] (1MB)
[ 0.000000] efi: mem44: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80bf00000-0x00000ff80bffffff] (1MB)
[ 0.000000] efi: mem45: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80ff00000-0x00000ff80fffffff] (1MB)
[ 0.000000] efi: mem46: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa00000000-0x00000ffa02ffffff] (48MB)
[ 0.000000] efi: mem47: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa04000000-0x00000ffa06ffffff] (48MB)
[ 0.000000] efi: mem48: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa08000000-0x00000ffa0affffff] (48MB)
[ 0.000000] efi: mem49: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa0c000000-0x00000ffa0effffff] (48MB)
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xdeff000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable
[ 0.000000] 1 base 0FF800000000 mask 3FF800000000 uncachable
[ 0.000000] 2 base 100000000000 mask 300000000000 uncachable
[ 0.000000] 3 base 00007F800000 mask 3FFFFFC00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
Memory KASLR using RDRAND RDTSC...
[ 0.000000] e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff9469c0099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x93e1488000, 0x93e1488fff] PGTABLE
[ 0.000000] BRK [0x93e1489000, 0x93e1489fff] PGTABLE
[ 0.000000] BRK [0x93e148a000, 0x93e148afff] PGTABLE
[ 0.000000] BRK [0x93e148b000, 0x93e148bfff] PGTABLE
[ 0.000000] BRK [0x93e148c000, 0x93e148cfff] PGTABLE
[ 0.000000] BRK [0x93e148d000, 0x93e148dfff] PGTABLE
[ 0.000000] BRK [0x93e148e000, 0x93e148efff] PGTABLE
[ 0.000000] BRK [0x93e148f000, 0x93e148ffff] PGTABLE
[ 0.000000] BRK [0x93e1490000, 0x93e1490fff] PGTABLE
[ 0.000000] BRK [0x93e1491000, 0x93e1491fff] PGTABLE
[ 0.000000] BRK [0x93e1492000, 0x93e1492fff] PGTABLE
[ 0.000000] BRK [0x93e1493000, 0x93e1493fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x3d465000-0x3fffafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000076FFE014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x0000000076FFD0E8 000074 (v01 INTEL TIANO 00000000 01000013)
[ 0.000000] ACPI: FACP 0x0000000076FFC000 0000F4 (v04 INTEL TIANO 00000000 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x0000000076FF3000 007857 (v02 INTEL TIANO 00000003 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x0000000076EFA000 000040
[ 0.000000] ACPI: UEFI 0x0000000076EFC000 00005C (v01 INTEL RstSataV 00000000 00000000)
[ 0.000000] ACPI: HPET 0x0000000076FFB000 000038 (v01 INTEL TIANO 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIT 0x0000000076FF1000 00003C (v01 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: APIC 0x0000000076FEF000 000458 (v03 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: SRAT 0x0000000076FED000 000CF8 (v03 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x0000000076FBF000 02D367 (v02 SGI3X UVL 00000002 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x0000000076FBE000 00007C (v01 SGI3X UVL 00000002 MSFT 00000001)
[ 0.000000] ACPI: SPCR 0x0000000076FBD000 000050 (v01 00000000 00000000)
[ 0.000000] ACPI: DMAR 0x0000000076FBC000 0000C4 (v01 INTEL TIANO 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] UV: rev:1 part#:9578 nodeid:0000 n_skt:7 pnmsk:7f pn:0
[ 0.000000] UV: apicid_shift:0 apicid_mask:0x1f
[ 0.000000] UV: socketid_shift:5 pnode_mask:0x7f
[ 0.000000] UV: OEM IDs SGI3X/UVL, System/HUB Types 1/6, uv_apic 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0000 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0002 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000e -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0010 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0012 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0014 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0016 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0018 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001e -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x0020 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0022 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0024 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0026 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0028 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002e -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0030 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0032 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0034 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0036 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0038 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003e -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 0x0040 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0042 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0044 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0046 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0048 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004a -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004c -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004e -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0050 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0052 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0054 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0056 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0058 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005a -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005c -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005e -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 0x0060 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0062 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0064 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0066 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0068 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006a -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006c -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006e -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0070 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0072 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0074 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0076 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0078 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007a -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007c -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007e -> Node 3
[ 0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000d -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x000f -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0011 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0013 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0015 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0017 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0019 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001d -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x001f -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x0021 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0023 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0025 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0027 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0029 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002d -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x002f -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0031 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0033 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0035 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0037 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x0039 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003d -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x003f -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 0x0041 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0043 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0045 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0047 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0049 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004b -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004d -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x004f -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0051 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0053 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0055 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0057 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x0059 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005b -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005d -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x005f -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 0x0061 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0063 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0065 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0067 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0069 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006b -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006d -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x006f -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0071 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0073 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0075 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0077 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x0079 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007b -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007d -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x007f -> Node 3
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x4000000000-0x5fffffffff]
[ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x8000000000-0x9fffffffff]
[ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0xc000000000-0xdfffffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=4
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x207ffd5000-0x207fffffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x5efefd5000-0x5efeffffff]
[ 0.000000] NODE_DATA(2) allocated [mem 0x9efefd5000-0x9efeffffff]
[ 0.000000] NODE_DATA(3) allocated [mem 0xdefefd2000-0xdefeffcfff]
[ 0.000000] kexec_core: crashkernel: memory value expected
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000defeffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000051fff]
[ 0.000000] node 0: [mem 0x000000000005b000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000072829fff]
[ 0.000000] node 0: [mem 0x000000007282b000-0x0000000072837fff]
[ 0.000000] node 0: [mem 0x0000000072a78000-0x00000000751fefff]
[ 0.000000] node 0: [mem 0x0000000076fff000-0x000000007effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000001effffffff]
[ 0.000000] node 0: [mem 0x0000002000000000-0x000000207fffffff]
[ 0.000000] node 1: [mem 0x0000004000000000-0x0000005efeffffff]
[ 0.000000] node 2: [mem 0x0000008000000000-0x0000009efeffffff]
[ 0.000000] node 3: [mem 0x000000c000000000-0x000000defeffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff]
[ 0.000000] On node 0 totalpages: 32493397
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7935 pages used for memmap
[ 0.000000] DMA32 zone: 507839 pages, LIFO batch:31
[ 0.000000] Normal zone: 516096 pages used for memmap
[ 0.000000] Normal zone: 31981568 pages, LIFO batch:31
[ 0.000000] Initmem setup node 1 [mem 0x0000004000000000-0x0000005efeffffff]
[ 0.000000] On node 1 totalpages: 32501760
[ 0.000000] Normal zone: 507840 pages used for memmap
[ 0.000000] Normal zone: 32501760 pages, LIFO batch:31
[ 0.000000] Initmem setup node 2 [mem 0x0000008000000000-0x0000009efeffffff]
[ 0.000000] On node 2 totalpages: 32501760
[ 0.000000] Normal zone: 507840 pages used for memmap
[ 0.000000] Normal zone: 32501760 pages, LIFO batch:31
[ 0.000000] Initmem setup node 3 [mem 0x000000c000000000-0x000000defeffffff]
[ 0.000000] On node 3 totalpages: 32501760
[ 0.000000] Normal zone: 507840 pages used for memmap
[ 0.000000] Normal zone: 32501760 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_TYPE_RESERVED
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] UV: rev:1 part#:9578 nodeid:0000 n_skt:7 pnmsk:7f pn:0
[ 0.000000] UV: apicid_shift:0 apicid_mask:0x1f
[ 0.000000] UV: socketid_shift:5 pnode_mask:0x7f
[ 0.000000] UV: OEM IDs SGI3X/UVL, System/HUB Types 1/6, uv_apic 0
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 128 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00052000-0x0005afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7282a000-0x7282afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x72838000-0x72a77fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73bf1000-0x73bf1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73c05000-0x73c05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x751ff000-0x75efefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75eff000-0x76efefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76eff000-0x76ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f00000000-0x1fffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x2080000000-0x3fffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5eff000000-0x7fffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9eff000000-0xbfffffffff]
[ 0.000000] e820: [mem 0x90000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:4
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff9489c3600000 s116376 r8192 d31080 u262144
[ 0.000000] pcpu-alloc: s116376 r8192 d31080 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007
[ 0.000000] pcpu-alloc: [0] 008 009 010 011 012 013 014 015
[ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071
[ 0.000000] pcpu-alloc: [0] 072 073 074 075 076 077 078 079
[ 0.000000] pcpu-alloc: [1] 016 017 018 019 020 021 022 023
[ 0.000000] pcpu-alloc: [1] 024 025 026 027 028 029 030 031
[ 0.000000] pcpu-alloc: [1] 080 081 082 083 084 085 086 087
[ 0.000000] pcpu-alloc: [1] 088 089 090 091 092 093 094 095
[ 0.000000] pcpu-alloc: [2] 032 033 034 035 036 037 038 039
[ 0.000000] pcpu-alloc: [2] 040 041 042 043 044 045 046 047
[ 0.000000] pcpu-alloc: [2] 096 097 098 099 100 101 102 103
[ 0.000000] pcpu-alloc: [2] 104 105 106 107 108 109 110 111
[ 0.000000] pcpu-alloc: [3] 048 049 050 051 052 053 054 055
[ 0.000000] pcpu-alloc: [3] 056 057 058 059 060 061 062 063
[ 0.000000] pcpu-alloc: [3] 112 113 114 115 116 117 118 119
[ 0.000000] pcpu-alloc: [3] 120 121 122 123 124 125 126 127
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 127951040
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0+ root=/dev/mapper/rhel_sgi--uv300--03-root ro add_efi_memmap earlyprintk=ttyS0,115200n8 intel_idle.max_cstate=1 loglevel=9 nmi_watchdog=0 nobau processor.max_cstate=1 crashkernel=auto rd.lvm.lv=rhel_sgi-uv300-03/root rd.lvm.lv=rhel_sgi-uv300-03/swap console=ttyS0,115200n8 LANG=en_US.UTF-8 efi=old_map efi=debug
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 10008884K/519994708K available (7546K kernel code, 1506K rwdata, 3336K rodata, 2160K init, 2920K bss, 8593352K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=4
[ 0.000000] ftrace: allocating 31399 entries in 123 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=128.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=128
[ 0.000000] NR_IRQS:524544 nr_irqs:1856 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2099.972 MHz processor
[ 0.003000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.94 BogoMIPS (lpj=2099972)
[ 0.004003] pid_max: default: 131072 minimum: 1024
[ 0.005129] ACPI: Core revision 20170119
[ 0.018125] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.019151] efi: EFI runtime memory map:
[ 0.020008] efi: mem00: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000060200000-0x000000006027ffff] (0MB)
[ 0.021003] efi: mem01: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000062765000-0x0000000072829fff] (256MB)
[ 0.022004] efi: mem02: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000007282a000-0x000000007282afff] (0MB)
[ 0.023003] efi: mem03: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007282b000-0x0000000072837fff] (0MB)
[ 0.024003] efi: mem04: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000072838000-0x0000000072a77fff] (2MB)
[ 0.025003] efi: mem05: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000072a78000-0x00000000739fafff] (15MB)
[ 0.026003] efi: mem06: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x00000000739fb000-0x00000000739fbfff] (0MB)
[ 0.027003] efi: mem07: [Boot Code | | | | | | | | |WB|WT|WC|UC] range=[0x0000000074a73000-0x00000000751fefff] (7MB)
[ 0.028003] efi: mem08: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000751ff000-0x00000000755fefff] (4MB)
[ 0.029003] efi: mem09: [Runtime Code |RUN| | | | | | | |WB|WT|WC|UC] range=[0x00000000755ff000-0x0000000075dfefff] (8MB)
[ 0.030003] efi: mem10: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d303000-0x000000007d303fff] (0MB)
[ 0.031003] efi: mem11: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000007d325000-0x000000007effffff] (28MB)
[ 0.032003] efi: mem12: [Memory Mapped I/O |RUN| | | | | | | | | | | ] range=[0x0000000080000000-0x000000008fffffff] (256MB)
[ 0.033003] efi: mem13: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000000f8000000-0x00000000fbffffff] (64MB)
[ 0.034003] efi: mem14: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff800000000-0x00000ff803dfffff] (62MB)
[ 0.035003] efi: mem15: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff803f00000-0x00000ff803ffffff] (1MB)
[ 0.036003] efi: mem16: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff807f00000-0x00000ff807ffffff] (1MB)
[ 0.037003] efi: mem17: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80bf00000-0x00000ff80bffffff] (1MB)
[ 0.038003] efi: mem18: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ff80ff00000-0x00000ff80fffffff] (1MB)
[ 0.039003] efi: mem19: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa00000000-0x00000ffa02ffffff] (48MB)
[ 0.040003] efi: mem20: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa04000000-0x00000ffa06ffffff] (48MB)
[ 0.041003] efi: mem21: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa08000000-0x00000ffa0affffff] (48MB)
[ 0.042003] efi: mem22: [Memory Mapped I/O |RUN| | | | | | | | | | |UC] range=[0x00000ffa0c000000-0x00000ffa0effffff] (48MB)
[ 0.043139] efi: efi_call_phys_prolog: PAGE_OFFSET: 0xffff9469c0000000
[ 0.044003] efi: efi_call_phys_prolog: pgd: 0x0: va: 0xffff9469c0000000, 0x0 -> 0x93e1488067
[ 0.045002] efi: efi_call_phys_prolog: pgd: 0x1: va: 0xffff94e9c0000000, 0x0 -> 0xdefefff067
[ 0.046010] BUG: unable to handle kernel paging request at 0000000075dc4850
[ 0.047000] IP: 0x75dc4850
[ 0.047000] PGD 93e1488067
[ 0.047000] P4D 93e1488067
[ 0.047000] PUD 0
[ 0.047000]
[ 0.047000] Oops: 0010 [#1] SMP
[ 0.047000] Modules linked in:
[ 0.047000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0+ #8
[ 0.047000] Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016
[ 0.047000] task: ffffffff9a0104c0 task.stack: ffffffff9a000000
[ 0.047000] RIP: 0010:0x75dc4850
[ 0.047000] RSP: 0000:ffffffff9a003d98 EFLAGS: 00010086
[ 0.047000] RAX: ffff9548befcc000 RBX: 000000c07fc22000 RCX: 0000000000000450
[ 0.047000] RDX: 0000000000000030 RSI: 0000000000000450 RDI: 0000000075dc4850
[ 0.047000] RBP: ffffffff9a003e40 R08: 0000000000000001 R09: 000000c07fc22000
[ 0.047000] R10: 65647830203e2d20 R11: 3736306666666566 R12: 0000000000000030
[ 0.047000] R13: 0000000000000246 R14: ffff946b3fcb0ce0 R15: 0000000000000450
[ 0.047000] FS: 0000000000000000(0000) GS:ffff9489c3600000(0000) knlGS:0000000000000000
[ 0.047000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.047000] CR2: 0000000075dc4850 CR3: 00000093e0e09000 CR4: 00000000000406b0
[ 0.047000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.047000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 0.047000] Call Trace:
[ 0.047000] ? efi_call+0x58/0x90
[ 0.047000] ? vprintk_func+0x20/0x50
[ 0.047000] ? printk+0x58/0x6f
[ 0.047000] efi_enter_virtual_mode+0x3ca/0x512
[ 0.047000] start_kernel+0x424/0x4c8
[ 0.047000] ? set_init_arg+0x5a/0x5a
[ 0.047000] ? early_idt_handler_array+0x120/0x120
[ 0.047000] x86_64_start_reservations+0x29/0x2b
[ 0.047000] x86_64_start_kernel+0x151/0x174
[ 0.047000] secondary_startup_64+0x9f/0x9f
[ 0.047000] Code: Bad RIP value.
[ 0.047000] RIP: 0x75dc4850 RSP: ffffffff9a003d98
[ 0.047000] CR2: 0000000075dc4850
[ 0.047000] ---[ end trace 5f12edd1f8c1b98e ]---
[ 0.047000] Kernel panic - not syncing: Fatal exception
[ 0.047000] ---[ end Kernel panic - not syncing: Fatal exception
next prev parent reply other threads:[~2017-05-09 3:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-27 12:07 [PATCH v2] x86/efi: Correct ident mapping of efi old_map when kalsr enabled Baoquan He
2017-04-27 12:07 ` Baoquan He
[not found] ` <1493294823-9315-1-git-send-email-bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2017-05-01 14:21 ` Thomas Garnier
2017-05-01 14:21 ` Thomas Garnier
2017-05-05 20:42 ` Matt Fleming
2017-05-05 20:42 ` Matt Fleming
[not found] ` <20170505204214.GB5225-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
2017-05-05 23:36 ` Borislav Petkov
2017-05-05 23:36 ` Borislav Petkov
[not found] ` <20170505233620.eka5md5mmnp4ituz-fF5Pk5pvG8Y@public.gmane.org>
2017-05-07 18:37 ` Bhupesh Sharma
2017-05-07 18:37 ` Bhupesh Sharma
[not found] ` <CACi5LpOJe+dpJBeuZxm80pd0dX9-V=DQv_R3TDzFmn4Q1XA1SA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-05-08 1:36 ` Baoquan He
2017-05-08 1:36 ` Baoquan He
2017-05-08 15:25 ` Borislav Petkov
2017-05-08 15:25 ` Borislav Petkov
[not found] ` <20170508152514.mc5j3lrhntd3qodj-fF5Pk5pvG8Y@public.gmane.org>
2017-05-09 3:30 ` Baoquan He [this message]
2017-05-09 3:30 ` Baoquan He
2017-05-10 2:30 ` Baoquan He
2017-05-10 2:30 ` Baoquan He
2017-05-08 3:18 ` Russ Anderson
2017-05-08 3:18 ` Russ Anderson
2017-05-11 9:32 ` Baoquan He
2017-05-11 9:32 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170509033051.GD21870@x1 \
--to=bhe-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=athorlton-sJ/iWh9BUns@public.gmane.org \
--cc=bhsharma-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org \
--cc=dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org \
--cc=keescook-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org \
--cc=mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=rja-sJ/iWh9BUns@public.gmane.org \
--cc=sivanich-sJ/iWh9BUns@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
--cc=thgarnie-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=travis-sJ/iWh9BUns@public.gmane.org \
--cc=x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.