From: Shawn Guo <shawnguo@kernel.org>
To: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org,
Sascha Hauer <kernel@pengutronix.de>,
Anson Huang <Anson.Huang@nxp.com>,
Robin Gong <yibin.gong@nxp.com>, Peter Chen <peter.chen@nxp.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Henri Roosen <henri.roosen@ginzinger.com>,
Marek Vasut <marex@denx.de>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH v2] ARM: dts: imx6sx-sdb: Remove OPP override
Date: Fri, 12 May 2017 08:33:55 +0800 [thread overview]
Message-ID: <20170512003354.GA8471@dragon> (raw)
In-Reply-To: <7b929a65b4893e081c2c04bb0588801f37ac2cca.1493981825.git.leonard.crestez@nxp.com>
On Fri, May 05, 2017 at 02:00:17PM +0300, Leonard Crestez wrote:
> The board file for imx6sx-sdb overrides cpufreq operating points to use
> higher voltages. This is done because the board has a shared rail for
> VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
> needs to be a value suitable for both ARM and SOC.
>
> This only applies to LDO bypass mode, a feature not present in upstream.
> When LDOs are enabled the effect is to use higher voltages than necessary
> for no good reason.
>
> Setting these higher voltages can make some boards fail to boot with ugly
> semi-random crashes reminiscent of memory corruption. These failures only
> happen on board rev. C, rev. B is reported to still work.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> CC: stable@vger.kernel.org
Applied, thanks.
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: dts: imx6sx-sdb: Remove OPP override
Date: Fri, 12 May 2017 08:33:55 +0800 [thread overview]
Message-ID: <20170512003354.GA8471@dragon> (raw)
In-Reply-To: <7b929a65b4893e081c2c04bb0588801f37ac2cca.1493981825.git.leonard.crestez@nxp.com>
On Fri, May 05, 2017 at 02:00:17PM +0300, Leonard Crestez wrote:
> The board file for imx6sx-sdb overrides cpufreq operating points to use
> higher voltages. This is done because the board has a shared rail for
> VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
> needs to be a value suitable for both ARM and SOC.
>
> This only applies to LDO bypass mode, a feature not present in upstream.
> When LDOs are enabled the effect is to use higher voltages than necessary
> for no good reason.
>
> Setting these higher voltages can make some boards fail to boot with ugly
> semi-random crashes reminiscent of memory corruption. These failures only
> happen on board rev. C, rev. B is reported to still work.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> CC: stable at vger.kernel.org
Applied, thanks.
next prev parent reply other threads:[~2017-05-12 0:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-05 11:00 [PATCH v2] ARM: dts: imx6sx-sdb: Remove OPP override Leonard Crestez
2017-05-05 11:00 ` Leonard Crestez
2017-05-05 11:00 ` Leonard Crestez
2017-05-10 14:49 ` Shawn Guo
2017-05-10 14:49 ` Shawn Guo
2017-05-12 0:33 ` Shawn Guo [this message]
2017-05-12 0:33 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170512003354.GA8471@dragon \
--to=shawnguo@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=fabio.estevam@nxp.com \
--cc=henri.roosen@ginzinger.com \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marex@denx.de \
--cc=peter.chen@nxp.com \
--cc=stable@vger.kernel.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.