From: abelvesa@gmail.com (Abel Vesa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
Date: Fri, 12 May 2017 22:05:29 +0100 [thread overview]
Message-ID: <20170512210529.GA29693@nuc> (raw)
In-Reply-To: <1494621518-8489-1-git-send-email-abelvesa@gmail.com>
On Fri, May 12, 2017 at 09:38:37PM +0100, abelvesa at gmail.com wrote:
> From: Abel Vesa <abelvesa@gmail.com>
To be ignored, wrong git config. Will send another one without the From line.
>
> The DYNAMIC_FTRACE_WITH_REGS configuration makes it possible for a ftrace
> operation to specify if registers need to saved/restored by the ftrace handler.
> This is needed by kgraft and possibly other ftrace-based tools, and the ARM
> architecture is currently lacking this feature. It would also be the first step
> to support the "Kprobes-on-ftrace" optimization on ARM.
>
> This patch introduces a new ftrace handler that stores the registers on the
> stack before calling the next stage. The registers are restored from the stack
> before going back to the instrumented function.
>
> A side-effect of this patch is to activate the support for ftrace_modify_call()
> as it defines ARCH_SUPPORTS_FTRACE_OPS for the ARM architecture.
>
> Signed-off-by: Abel Vesa <abelvesa@gmail.com>
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/include/asm/ftrace.h | 4 ++
> arch/arm/kernel/entry-ftrace.S | 100 +++++++++++++++++++++++++++++++++++++++++
> arch/arm/kernel/ftrace.c | 37 +++++++++++++++
> 4 files changed, 142 insertions(+)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 4c1a35f..730d456 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -56,6 +56,7 @@ config ARM
> select HAVE_DMA_API_DEBUG
> select HAVE_DMA_CONTIGUOUS if MMU
> select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
> + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
> select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
> select HAVE_EXIT_THREAD
> select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
> diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
> index 22b7311..f379881 100644
> --- a/arch/arm/include/asm/ftrace.h
> +++ b/arch/arm/include/asm/ftrace.h
> @@ -1,6 +1,10 @@
> #ifndef _ASM_ARM_FTRACE
> #define _ASM_ARM_FTRACE
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +#define ARCH_SUPPORTS_FTRACE_OPS 1
> +#endif
> +
> #ifdef CONFIG_FUNCTION_TRACER
> #define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc))
> #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
> diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
> index c73c403..efcd9f2 100644
> --- a/arch/arm/kernel/entry-ftrace.S
> +++ b/arch/arm/kernel/entry-ftrace.S
> @@ -92,12 +92,95 @@
> 2: mcount_exit
> .endm
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +
> +.macro __ftrace_regs_caller
> +
> + sub sp, sp, #8 @ space for PC and CPSR OLD_R0,
> + @ OLD_R0 will overwrite previous LR
> +
> + add ip, sp, #12 @ move in IP the value of SP as it was
> + @ before the push {lr} of the mcount mechanism
> +
> + str lr, [sp, #0] @ store LR instead of PC
> +
> + ldr lr, [sp, #8] @ get previous LR
> +
> + str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
> +
> + stmdb sp!, {ip, lr}
> + stmdb sp!, {r0-r11, lr}
> +
> + @ stack content at this point:
> + @ 0 4 48 52 56 60 64 68 72
> + @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
> +
> + mov r3, sp @ struct pt_regs*
> +
> + ldr r2, =function_trace_op
> + ldr r2, [r2] @ pointer to the current
> + @ function tracing op
> +
> + ldr r1, [sp, #S_LR] @ lr of instrumented func
> +
> + ldr lr, [sp, #S_PC] @ get LR
> +
> + mcount_adjust_addr r0, lr @ instrumented function
> +
> + .globl ftrace_regs_call
> +ftrace_regs_call:
> + bl ftrace_stub
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> + .globl ftrace_graph_regs_call
> +ftrace_graph_regs_call:
> + mov r0, r0
> +#endif
> +
> + @ pop saved regs
> + ldmia sp!, {r0-r12} @ restore r0 through r12
> + ldr ip, [sp, #8] @ restore PC
> + ldr lr, [sp, #4] @ restore LR
> + ldr sp, [sp, #0] @ restore SP
> + mov pc, ip @ return
> +.endm
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +.macro __ftrace_graph_regs_caller
> +
> + sub r0, fp, #4 @ lr of instrumented routine (parent)
> +
> + @ called from __ftrace_regs_caller
> + ldr r1, [sp, #S_PC] @ instrumented routine (func)
> + mcount_adjust_addr r1, r1
> +
> + mov r2, fp @ frame pointer
> + bl prepare_ftrace_return
> +
> + @ pop registers saved in ftrace_regs_caller
> + ldmia sp!, {r0-r12} @ restore r0 through r12
> + ldr ip, [sp, #8] @ restore PC
> + ldr lr, [sp, #4] @ restore LR
> + ldr sp, [sp, #0] @ restore SP
> + mov pc, ip @ return
> +
> +.endm
> +#endif
> +#endif
> +
> .macro __ftrace_caller suffix
> mcount_enter
>
> mcount_get_lr r1 @ lr of instrumented func
> mcount_adjust_addr r0, lr @ instrumented function
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> + ldr r2, =function_trace_op
> + ldr r2, [r2] @ pointer to the current
> + @ function tracing op
> + mov r3, #0 @ regs is NULL
> +#endif
> +
> .globl ftrace_call\suffix
> ftrace_call\suffix:
> bl ftrace_stub
> @@ -212,6 +295,15 @@ UNWIND(.fnstart)
> __ftrace_caller
> UNWIND(.fnend)
> ENDPROC(ftrace_caller)
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +ENTRY(ftrace_regs_caller)
> +UNWIND(.fnstart)
> + __ftrace_regs_caller
> +UNWIND(.fnend)
> +ENDPROC(ftrace_regs_caller)
> +#endif
> +
> #endif
>
> #ifdef CONFIG_FUNCTION_GRAPH_TRACER
> @@ -220,6 +312,14 @@ UNWIND(.fnstart)
> __ftrace_graph_caller
> UNWIND(.fnend)
> ENDPROC(ftrace_graph_caller)
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +ENTRY(ftrace_graph_regs_caller)
> +UNWIND(.fnstart)
> + __ftrace_graph_regs_caller
> +UNWIND(.fnend)
> +ENDPROC(ftrace_graph_regs_caller)
> +#endif
> #endif
>
> .purgem mcount_enter
> diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
> index 833c991..5617932 100644
> --- a/arch/arm/kernel/ftrace.c
> +++ b/arch/arm/kernel/ftrace.c
> @@ -141,6 +141,15 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
>
> ret = ftrace_modify_code(pc, 0, new, false);
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> + if (!ret) {
> + pc = (unsigned long)&ftrace_regs_call;
> + new = ftrace_call_replace(pc, (unsigned long)func);
> +
> + ret = ftrace_modify_code(pc, 0, new, false);
> + }
> +#endif
> +
> #ifdef CONFIG_OLD_MCOUNT
> if (!ret) {
> pc = (unsigned long)&ftrace_call_old;
> @@ -159,11 +168,29 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> unsigned long ip = rec->ip;
>
> old = ftrace_nop_replace(rec);
> +
> + new = ftrace_call_replace(ip, adjust_address(rec, addr));
> +
> + return ftrace_modify_code(rec->ip, old, new, true);
> +}
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +
> +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
> + unsigned long addr)
> +{
> + unsigned long new, old;
> + unsigned long ip = rec->ip;
> +
> + old = ftrace_call_replace(ip, adjust_address(rec, old_addr));
> +
> new = ftrace_call_replace(ip, adjust_address(rec, addr));
>
> return ftrace_modify_code(rec->ip, old, new, true);
> }
>
> +#endif
> +
> int ftrace_make_nop(struct module *mod,
> struct dyn_ftrace *rec, unsigned long addr)
> {
> @@ -231,6 +258,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
> extern unsigned long ftrace_graph_call;
> extern unsigned long ftrace_graph_call_old;
> extern void ftrace_graph_caller_old(void);
> +extern unsigned long ftrace_graph_regs_call;
> +extern void ftrace_graph_regs_caller(void);
>
> static int __ftrace_modify_caller(unsigned long *callsite,
> void (*func) (void), bool enable)
> @@ -253,6 +282,14 @@ static int ftrace_modify_graph_caller(bool enable)
> ftrace_graph_caller,
> enable);
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> + if (!ret)
> + ret = __ftrace_modify_caller(&ftrace_graph_regs_call,
> + ftrace_graph_regs_caller,
> + enable);
> +#endif
> +
> +
> #ifdef CONFIG_OLD_MCOUNT
> if (!ret)
> ret = __ftrace_modify_caller(&ftrace_graph_call_old,
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abelvesa@gmail.com>
To: robin.murphy@arm.com, jjhiblot@traphandler.com,
nicstange@gmail.com, Russell King <linux@armlinux.org.uk>,
Steven Rostedt <rostedt@goodmis.org>,
Ingo Molnar <mingo@redhat.com>
Cc: pmladek@suse.com, mhiramat@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
Date: Fri, 12 May 2017 22:05:29 +0100 [thread overview]
Message-ID: <20170512210529.GA29693@nuc> (raw)
In-Reply-To: <1494621518-8489-1-git-send-email-abelvesa@gmail.com>
On Fri, May 12, 2017 at 09:38:37PM +0100, abelvesa@gmail.com wrote:
> From: Abel Vesa <abelvesa@gmail.com>
To be ignored, wrong git config. Will send another one without the From line.
>
> The DYNAMIC_FTRACE_WITH_REGS configuration makes it possible for a ftrace
> operation to specify if registers need to saved/restored by the ftrace handler.
> This is needed by kgraft and possibly other ftrace-based tools, and the ARM
> architecture is currently lacking this feature. It would also be the first step
> to support the "Kprobes-on-ftrace" optimization on ARM.
>
> This patch introduces a new ftrace handler that stores the registers on the
> stack before calling the next stage. The registers are restored from the stack
> before going back to the instrumented function.
>
> A side-effect of this patch is to activate the support for ftrace_modify_call()
> as it defines ARCH_SUPPORTS_FTRACE_OPS for the ARM architecture.
>
> Signed-off-by: Abel Vesa <abelvesa@gmail.com>
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/include/asm/ftrace.h | 4 ++
> arch/arm/kernel/entry-ftrace.S | 100 +++++++++++++++++++++++++++++++++++++++++
> arch/arm/kernel/ftrace.c | 37 +++++++++++++++
> 4 files changed, 142 insertions(+)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 4c1a35f..730d456 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -56,6 +56,7 @@ config ARM
> select HAVE_DMA_API_DEBUG
> select HAVE_DMA_CONTIGUOUS if MMU
> select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
> + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
> select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
> select HAVE_EXIT_THREAD
> select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
> diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
> index 22b7311..f379881 100644
> --- a/arch/arm/include/asm/ftrace.h
> +++ b/arch/arm/include/asm/ftrace.h
> @@ -1,6 +1,10 @@
> #ifndef _ASM_ARM_FTRACE
> #define _ASM_ARM_FTRACE
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +#define ARCH_SUPPORTS_FTRACE_OPS 1
> +#endif
> +
> #ifdef CONFIG_FUNCTION_TRACER
> #define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc))
> #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
> diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
> index c73c403..efcd9f2 100644
> --- a/arch/arm/kernel/entry-ftrace.S
> +++ b/arch/arm/kernel/entry-ftrace.S
> @@ -92,12 +92,95 @@
> 2: mcount_exit
> .endm
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +
> +.macro __ftrace_regs_caller
> +
> + sub sp, sp, #8 @ space for PC and CPSR OLD_R0,
> + @ OLD_R0 will overwrite previous LR
> +
> + add ip, sp, #12 @ move in IP the value of SP as it was
> + @ before the push {lr} of the mcount mechanism
> +
> + str lr, [sp, #0] @ store LR instead of PC
> +
> + ldr lr, [sp, #8] @ get previous LR
> +
> + str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
> +
> + stmdb sp!, {ip, lr}
> + stmdb sp!, {r0-r11, lr}
> +
> + @ stack content at this point:
> + @ 0 4 48 52 56 60 64 68 72
> + @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
> +
> + mov r3, sp @ struct pt_regs*
> +
> + ldr r2, =function_trace_op
> + ldr r2, [r2] @ pointer to the current
> + @ function tracing op
> +
> + ldr r1, [sp, #S_LR] @ lr of instrumented func
> +
> + ldr lr, [sp, #S_PC] @ get LR
> +
> + mcount_adjust_addr r0, lr @ instrumented function
> +
> + .globl ftrace_regs_call
> +ftrace_regs_call:
> + bl ftrace_stub
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> + .globl ftrace_graph_regs_call
> +ftrace_graph_regs_call:
> + mov r0, r0
> +#endif
> +
> + @ pop saved regs
> + ldmia sp!, {r0-r12} @ restore r0 through r12
> + ldr ip, [sp, #8] @ restore PC
> + ldr lr, [sp, #4] @ restore LR
> + ldr sp, [sp, #0] @ restore SP
> + mov pc, ip @ return
> +.endm
> +
> +#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> +.macro __ftrace_graph_regs_caller
> +
> + sub r0, fp, #4 @ lr of instrumented routine (parent)
> +
> + @ called from __ftrace_regs_caller
> + ldr r1, [sp, #S_PC] @ instrumented routine (func)
> + mcount_adjust_addr r1, r1
> +
> + mov r2, fp @ frame pointer
> + bl prepare_ftrace_return
> +
> + @ pop registers saved in ftrace_regs_caller
> + ldmia sp!, {r0-r12} @ restore r0 through r12
> + ldr ip, [sp, #8] @ restore PC
> + ldr lr, [sp, #4] @ restore LR
> + ldr sp, [sp, #0] @ restore SP
> + mov pc, ip @ return
> +
> +.endm
> +#endif
> +#endif
> +
> .macro __ftrace_caller suffix
> mcount_enter
>
> mcount_get_lr r1 @ lr of instrumented func
> mcount_adjust_addr r0, lr @ instrumented function
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> + ldr r2, =function_trace_op
> + ldr r2, [r2] @ pointer to the current
> + @ function tracing op
> + mov r3, #0 @ regs is NULL
> +#endif
> +
> .globl ftrace_call\suffix
> ftrace_call\suffix:
> bl ftrace_stub
> @@ -212,6 +295,15 @@ UNWIND(.fnstart)
> __ftrace_caller
> UNWIND(.fnend)
> ENDPROC(ftrace_caller)
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +ENTRY(ftrace_regs_caller)
> +UNWIND(.fnstart)
> + __ftrace_regs_caller
> +UNWIND(.fnend)
> +ENDPROC(ftrace_regs_caller)
> +#endif
> +
> #endif
>
> #ifdef CONFIG_FUNCTION_GRAPH_TRACER
> @@ -220,6 +312,14 @@ UNWIND(.fnstart)
> __ftrace_graph_caller
> UNWIND(.fnend)
> ENDPROC(ftrace_graph_caller)
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +ENTRY(ftrace_graph_regs_caller)
> +UNWIND(.fnstart)
> + __ftrace_graph_regs_caller
> +UNWIND(.fnend)
> +ENDPROC(ftrace_graph_regs_caller)
> +#endif
> #endif
>
> .purgem mcount_enter
> diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
> index 833c991..5617932 100644
> --- a/arch/arm/kernel/ftrace.c
> +++ b/arch/arm/kernel/ftrace.c
> @@ -141,6 +141,15 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
>
> ret = ftrace_modify_code(pc, 0, new, false);
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> + if (!ret) {
> + pc = (unsigned long)&ftrace_regs_call;
> + new = ftrace_call_replace(pc, (unsigned long)func);
> +
> + ret = ftrace_modify_code(pc, 0, new, false);
> + }
> +#endif
> +
> #ifdef CONFIG_OLD_MCOUNT
> if (!ret) {
> pc = (unsigned long)&ftrace_call_old;
> @@ -159,11 +168,29 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> unsigned long ip = rec->ip;
>
> old = ftrace_nop_replace(rec);
> +
> + new = ftrace_call_replace(ip, adjust_address(rec, addr));
> +
> + return ftrace_modify_code(rec->ip, old, new, true);
> +}
> +
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +
> +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
> + unsigned long addr)
> +{
> + unsigned long new, old;
> + unsigned long ip = rec->ip;
> +
> + old = ftrace_call_replace(ip, adjust_address(rec, old_addr));
> +
> new = ftrace_call_replace(ip, adjust_address(rec, addr));
>
> return ftrace_modify_code(rec->ip, old, new, true);
> }
>
> +#endif
> +
> int ftrace_make_nop(struct module *mod,
> struct dyn_ftrace *rec, unsigned long addr)
> {
> @@ -231,6 +258,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
> extern unsigned long ftrace_graph_call;
> extern unsigned long ftrace_graph_call_old;
> extern void ftrace_graph_caller_old(void);
> +extern unsigned long ftrace_graph_regs_call;
> +extern void ftrace_graph_regs_caller(void);
>
> static int __ftrace_modify_caller(unsigned long *callsite,
> void (*func) (void), bool enable)
> @@ -253,6 +282,14 @@ static int ftrace_modify_graph_caller(bool enable)
> ftrace_graph_caller,
> enable);
>
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> + if (!ret)
> + ret = __ftrace_modify_caller(&ftrace_graph_regs_call,
> + ftrace_graph_regs_caller,
> + enable);
> +#endif
> +
> +
> #ifdef CONFIG_OLD_MCOUNT
> if (!ret)
> ret = __ftrace_modify_caller(&ftrace_graph_call_old,
> --
> 2.7.4
>
next prev parent reply other threads:[~2017-05-12 21:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-12 20:38 [PATCH] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS abelvesa at gmail.com
2017-05-12 20:38 ` abelvesa
2017-05-12 21:05 ` Abel Vesa [this message]
2017-05-12 21:05 ` Abel Vesa
-- strict thread matches above, loose matches on Subject: below --
2017-05-12 21:06 Abel Vesa
2017-05-12 21:06 ` Abel Vesa
2017-05-23 19:53 ` Russell King - ARM Linux
2017-05-23 19:53 ` Russell King - ARM Linux
2016-12-08 22:49 Abel Vesa
2016-12-08 22:49 ` Abel Vesa
2016-12-08 21:46 Abel Vesa
2016-12-08 21:46 ` Abel Vesa
2016-12-08 22:46 ` Abel Vesa
2016-12-08 22:46 ` Abel Vesa
2017-01-10 15:51 ` Petr Mladek
2017-01-10 15:51 ` Petr Mladek
2017-01-12 0:19 ` Abel Vesa
2017-01-12 0:19 ` Abel Vesa
2017-01-12 14:30 ` Jean-Jacques Hiblot
2017-01-12 14:30 ` Jean-Jacques Hiblot
2017-01-13 8:30 ` Jean-Jacques Hiblot
2017-01-13 8:30 ` Jean-Jacques Hiblot
2017-01-24 0:43 ` Abel Vesa
2017-01-24 0:43 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170512210529.GA29693@nuc \
--to=abelvesa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.