All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: linux-kernel@vger.kernel.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Thomas Abraham <thomas.ab@samsung.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: [PATCH 1/3] pinctrl: samsung: clean up modular vs. non-modular distinctions
Date: Mon, 22 May 2017 16:56:46 -0400	[thread overview]
Message-ID: <20170522205648.23545-2-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <20170522205648.23545-1-paul.gortmaker@windriver.com>

Fixups here tend to be more all over the map vs. some of the other
repeated/systematic ones we've seen elsewhere.

We remove module.h from code that isn't doing anything modular at
all;  if they have __init sections, then replace it with init.h

A couple drivers have module_exit() code that is essentially orphaned,
and so we remove that.

There are no module_init replacements, so we have no concerns wrt.
initcall ordering changes as per some of the other cleanups.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/pinctrl/samsung/pinctrl-exynos.c     |  1 -
 drivers/pinctrl/samsung/pinctrl-exynos5440.c | 15 +++------------
 drivers/pinctrl/samsung/pinctrl-s3c24xx.c    |  2 +-
 drivers/pinctrl/samsung/pinctrl-s3c64xx.c    |  2 +-
 drivers/pinctrl/samsung/pinctrl-samsung.c    | 13 +------------
 5 files changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 7b0e6cc35e04..70345462c7be 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -18,7 +18,6 @@
  * external gpio and wakeup interrupt support.
  */
 
-#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
index 3000df80709f..32a3a9fd65c4 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
@@ -1,6 +1,8 @@
 /*
  * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's EXYNOS5440 SoC.
  *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
@@ -10,7 +12,7 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -991,7 +993,6 @@ static const struct of_device_id exynos5440_pinctrl_dt_match[] = {
 	{ .compatible = "samsung,exynos5440-pinctrl" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, exynos5440_pinctrl_dt_match);
 
 static struct platform_driver exynos5440_pinctrl_driver = {
 	.probe		= exynos5440_pinctrl_probe,
@@ -1007,13 +1008,3 @@ static int __init exynos5440_pinctrl_drv_register(void)
 	return platform_driver_register(&exynos5440_pinctrl_driver);
 }
 postcore_initcall(exynos5440_pinctrl_drv_register);
-
-static void __exit exynos5440_pinctrl_drv_unregister(void)
-{
-	platform_driver_unregister(&exynos5440_pinctrl_driver);
-}
-module_exit(exynos5440_pinctrl_drv_unregister);
-
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
-MODULE_DESCRIPTION("Samsung EXYNOS5440 SoC pinctrl driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
index b82a003546ae..49774851e84a 100644
--- a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
+++ b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
@@ -13,7 +13,7 @@
  * external gpio and wakeup interrupt support.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
diff --git a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
index f17890aa6e25..4a88d7446e87 100644
--- a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
+++ b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
@@ -15,7 +15,7 @@
  * external gpio and wakeup interrupt support.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 96279905fcc9..51c46222f2d9 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -20,7 +20,7 @@
  * and wakeup interrupts can be hooked to.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -1221,7 +1221,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 #endif
 	{},
 };
-MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
 
 static const struct dev_pm_ops samsung_pinctrl_pm_ops = {
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(samsung_pinctrl_suspend,
@@ -1243,13 +1242,3 @@ static int __init samsung_pinctrl_drv_register(void)
 	return platform_driver_register(&samsung_pinctrl_driver);
 }
 postcore_initcall(samsung_pinctrl_drv_register);
-
-static void __exit samsung_pinctrl_drv_unregister(void)
-{
-	platform_driver_unregister(&samsung_pinctrl_driver);
-}
-module_exit(samsung_pinctrl_drv_unregister);
-
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
-MODULE_DESCRIPTION("Samsung pinctrl driver");
-MODULE_LICENSE("GPL v2");
-- 
2.11.0


WARNING: multiple messages have this Message-ID (diff)
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: <linux-kernel@vger.kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Thomas Abraham <thomas.ab@samsung.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	<linux-samsung-soc@vger.kernel.org>, <linux-gpio@vger.kernel.org>
Subject: [PATCH 1/3] pinctrl: samsung: clean up modular vs. non-modular distinctions
Date: Mon, 22 May 2017 16:56:46 -0400	[thread overview]
Message-ID: <20170522205648.23545-2-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <20170522205648.23545-1-paul.gortmaker@windriver.com>

Fixups here tend to be more all over the map vs. some of the other
repeated/systematic ones we've seen elsewhere.

We remove module.h from code that isn't doing anything modular at
all;  if they have __init sections, then replace it with init.h

A couple drivers have module_exit() code that is essentially orphaned,
and so we remove that.

There are no module_init replacements, so we have no concerns wrt.
initcall ordering changes as per some of the other cleanups.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/pinctrl/samsung/pinctrl-exynos.c     |  1 -
 drivers/pinctrl/samsung/pinctrl-exynos5440.c | 15 +++------------
 drivers/pinctrl/samsung/pinctrl-s3c24xx.c    |  2 +-
 drivers/pinctrl/samsung/pinctrl-s3c64xx.c    |  2 +-
 drivers/pinctrl/samsung/pinctrl-samsung.c    | 13 +------------
 5 files changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 7b0e6cc35e04..70345462c7be 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -18,7 +18,6 @@
  * external gpio and wakeup interrupt support.
  */
 
-#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
index 3000df80709f..32a3a9fd65c4 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
@@ -1,6 +1,8 @@
 /*
  * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's EXYNOS5440 SoC.
  *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
@@ -10,7 +12,7 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -991,7 +993,6 @@ static const struct of_device_id exynos5440_pinctrl_dt_match[] = {
 	{ .compatible = "samsung,exynos5440-pinctrl" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, exynos5440_pinctrl_dt_match);
 
 static struct platform_driver exynos5440_pinctrl_driver = {
 	.probe		= exynos5440_pinctrl_probe,
@@ -1007,13 +1008,3 @@ static int __init exynos5440_pinctrl_drv_register(void)
 	return platform_driver_register(&exynos5440_pinctrl_driver);
 }
 postcore_initcall(exynos5440_pinctrl_drv_register);
-
-static void __exit exynos5440_pinctrl_drv_unregister(void)
-{
-	platform_driver_unregister(&exynos5440_pinctrl_driver);
-}
-module_exit(exynos5440_pinctrl_drv_unregister);
-
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
-MODULE_DESCRIPTION("Samsung EXYNOS5440 SoC pinctrl driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
index b82a003546ae..49774851e84a 100644
--- a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
+++ b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
@@ -13,7 +13,7 @@
  * external gpio and wakeup interrupt support.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
diff --git a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
index f17890aa6e25..4a88d7446e87 100644
--- a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
+++ b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
@@ -15,7 +15,7 @@
  * external gpio and wakeup interrupt support.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 96279905fcc9..51c46222f2d9 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -20,7 +20,7 @@
  * and wakeup interrupts can be hooked to.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -1221,7 +1221,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 #endif
 	{},
 };
-MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
 
 static const struct dev_pm_ops samsung_pinctrl_pm_ops = {
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(samsung_pinctrl_suspend,
@@ -1243,13 +1242,3 @@ static int __init samsung_pinctrl_drv_register(void)
 	return platform_driver_register(&samsung_pinctrl_driver);
 }
 postcore_initcall(samsung_pinctrl_drv_register);
-
-static void __exit samsung_pinctrl_drv_unregister(void)
-{
-	platform_driver_unregister(&samsung_pinctrl_driver);
-}
-module_exit(samsung_pinctrl_drv_unregister);
-
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
-MODULE_DESCRIPTION("Samsung pinctrl driver");
-MODULE_LICENSE("GPL v2");
-- 
2.11.0

  reply	other threads:[~2017-05-22 20:57 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-22 20:56 [PATCH 0/3] pinctrl: bcm/samsung/tegra: make bool code non-modular Paul Gortmaker
2017-05-22 20:56 ` Paul Gortmaker
2017-05-22 20:56 ` Paul Gortmaker [this message]
2017-05-22 20:56   ` [PATCH 1/3] pinctrl: samsung: clean up modular vs. non-modular distinctions Paul Gortmaker
2017-05-23 14:51   ` Krzysztof Kozlowski
2017-05-23 15:54     ` Paul Gortmaker
2017-05-23 15:54       ` Paul Gortmaker
2017-05-29  8:24   ` Linus Walleij
     [not found] ` <20170522205648.23545-1-paul.gortmaker-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org>
2017-05-22 20:56   ` [PATCH 2/3] pinctrl: tegra: " Paul Gortmaker
2017-05-22 20:56     ` Paul Gortmaker
2017-05-29  8:25     ` Linus Walleij
2017-05-29  8:33   ` [PATCH 0/3] pinctrl: bcm/samsung/tegra: make bool code non-modular Linus Walleij
2017-05-29  8:33     ` Linus Walleij
2017-05-22 20:56 ` [PATCH 3/3] pinctrl: bcm: clean up modular vs. non-modular distinctions Paul Gortmaker
2017-05-22 20:56   ` Paul Gortmaker
2017-05-23 20:11   ` Stefan Wahren
2017-05-23 22:15   ` Scott Branden
2017-05-24  0:12     ` Paul Gortmaker
2017-05-24  0:12       ` Paul Gortmaker
2017-05-24  0:25       ` Florian Fainelli
2017-05-24  0:37         ` Scott Branden
2017-05-24  0:42           ` Florian Fainelli
2017-05-24  0:34       ` Scott Branden
2017-05-29  8:31   ` Linus Walleij
2017-05-29 16:35     ` Scott Branden
2017-05-30  7:41       ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170522205648.23545-2-paul.gortmaker@windriver.com \
    --to=paul.gortmaker@windriver.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=thomas.ab@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.