Re: [PATCH v3 0/9] Add support for the audio codec on Allwinner V3s

[Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>]

On Wed, May 24, 2017 at 06:05:58PM +0800, Icenowy Zheng wrote:
> Allwinner V3s features a audio codec with dedicated digital and analog parts,
> like the ones on A23/H3, but much simpler (lack of MIC2, LINE IN and MBIAS).
> 
> Add support for it.
> 
> In order to make the codec usable, DMA support is also added in this series.
> 
> Patch 1 split out MBIAS in analog codec driver.
> 
> Patch 2 prepared a set of objects that have MIC2 and LINEIN stripped out
> for V3s.
> 
> Patch 3/4 adds support for V3s in analog/digital codec.
> 
> Patch 5 add the gate bit as a common quirk of sun6i-dma driver, as V3s also
> needs it.
> 
> Patch 6 really adds support for V3s in DMA engine.
> 
> Patch 7/8/9 adds three parts of device tree: DMA engine, codec support
> and enable the codec for Lichee Pi Zero dock.
> 
> Icenowy Zheng (9):
>   ASoC: sun8i-codec-analog: split out mbias
>   ASoC: sun8i-codec-analog: prepare a mixer control/widget/route set for
>     V3s
>   ASoC: sun8i-codec-analog: add support for V3s SoC
>   ASoC: sun4i-codec: Add support for V3s codec
>   dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
>   dmaengine: sun6i: support V3s SoC variant
>   ARM: dts: sun8i: add DMA engine in V3s DTSI
>   ARM: dts: sun8i: add audio codec support into V3s DTSI
>   ARM: sun8i: v3s: enable audio on Lichee Pi Zero Dock board

And why do we need the cross tree submission?? I have asked before and was
met with silence! [1]

Can you please split it up per subsystem to make it easy for everyone and
clearly spell out dependencies.

[1]: https://www.spinics.net/lists/dmaengine/msg12884.html

-- 
~Vinod