From: afzal mohammed <afzal.mohd.ma@gmail.com>
To: linux-omap@vger.kernel.org
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [CFT] Always enable SMP mode on MP capable CPUs
Date: Wed, 24 May 2017 21:20:45 +0530 [thread overview]
Message-ID: <20170524155045.GA4082@afzalpc> (raw)
In-Reply-To: <20170518105209.GN22219@n2100.armlinux.org.uk>
To make those handling AM43x aware, To'ing l-o
Hi,
On Thu, May 18, 2017 at 11:52:10AM +0100, Russell King - ARM Linux wrote:
> As a result of a recent bug report, it has been found that certain CPUs
> must always have SMP mode enabled in order for the caches to work.
>
> Remove the conditional on setting the SMP bit(s).
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> I'm aware of a Cortex
> A9 CPU out there that does mis-identify itself as SMP capable but
> isn't:
>
> @ Core indicates it is SMP. Check for Aegis SOC where a single
> @ Cortex-A9 CPU is present but SMP operations fault.
>
> This will also need testing.
With this change, AM437x, i.e. the above mentioned SoC stops
booting (multi_v7 config)
afzal
>
> arch/arm/mm/proc-v7.S | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
> index 01d64c0b2563..4d48a4cf563b 100644
> --- a/arch/arm/mm/proc-v7.S
> +++ b/arch/arm/mm/proc-v7.S
> @@ -286,14 +286,10 @@ ENDPROC(cpu_pj4b_do_resume)
> stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
> bl v7_invalidate_l1
> ldmia r12, {r1-r6, lr}
> -#ifdef CONFIG_SMP
> + mrc p15, 0, r0, c1, c0, 1
> orr r10, r10, #(1 << 6) @ Enable SMP/nAMP mode
> - ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
> - ALT_UP(mov r0, r10) @ fake it for UP
> orr r10, r10, r0 @ Set required bits
> - teq r10, r0 @ Were they already set?
> - mcrne p15, 0, r10, c1, c0, 1 @ No, update register
> -#endif
> + mcr p15, 0, r10, c1, c0, 1 @ No, update register
> b __v7_setup_cont
>
> /*
>
> --
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: afzal.mohd.ma@gmail.com (afzal mohammed)
To: linux-arm-kernel@lists.infradead.org
Subject: [CFT] Always enable SMP mode on MP capable CPUs
Date: Wed, 24 May 2017 21:20:45 +0530 [thread overview]
Message-ID: <20170524155045.GA4082@afzalpc> (raw)
In-Reply-To: <20170518105209.GN22219@n2100.armlinux.org.uk>
To make those handling AM43x aware, To'ing l-o
Hi,
On Thu, May 18, 2017 at 11:52:10AM +0100, Russell King - ARM Linux wrote:
> As a result of a recent bug report, it has been found that certain CPUs
> must always have SMP mode enabled in order for the caches to work.
>
> Remove the conditional on setting the SMP bit(s).
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> I'm aware of a Cortex
> A9 CPU out there that does mis-identify itself as SMP capable but
> isn't:
>
> @ Core indicates it is SMP. Check for Aegis SOC where a single
> @ Cortex-A9 CPU is present but SMP operations fault.
>
> This will also need testing.
With this change, AM437x, i.e. the above mentioned SoC stops
booting (multi_v7 config)
afzal
>
> arch/arm/mm/proc-v7.S | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
> index 01d64c0b2563..4d48a4cf563b 100644
> --- a/arch/arm/mm/proc-v7.S
> +++ b/arch/arm/mm/proc-v7.S
> @@ -286,14 +286,10 @@ ENDPROC(cpu_pj4b_do_resume)
> stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
> bl v7_invalidate_l1
> ldmia r12, {r1-r6, lr}
> -#ifdef CONFIG_SMP
> + mrc p15, 0, r0, c1, c0, 1
> orr r10, r10, #(1 << 6) @ Enable SMP/nAMP mode
> - ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
> - ALT_UP(mov r0, r10) @ fake it for UP
> orr r10, r10, r0 @ Set required bits
> - teq r10, r0 @ Were they already set?
> - mcrne p15, 0, r10, c1, c0, 1 @ No, update register
> -#endif
> + mcr p15, 0, r10, c1, c0, 1 @ No, update register
> b __v7_setup_cont
>
> /*
>
> --
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-05-24 15:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-18 10:52 [CFT] Always enable SMP mode on MP capable CPUs Russell King - ARM Linux
2017-05-18 18:09 ` Fabio Estevam
2017-05-19 17:07 ` Fabio Estevam
2017-05-19 17:15 ` Russell King - ARM Linux
2017-05-24 15:38 ` Tony Lindgren
2017-05-24 15:38 ` Tony Lindgren
2017-05-25 14:48 ` Russell King - ARM Linux
2017-05-25 14:48 ` Russell King - ARM Linux
2017-05-25 15:11 ` Tony Lindgren
2017-05-25 15:11 ` Tony Lindgren
2017-05-25 18:05 ` Russell King - ARM Linux
2017-05-25 18:05 ` Russell King - ARM Linux
2017-05-25 22:13 ` Tony Lindgren
2017-05-25 22:13 ` Tony Lindgren
2017-05-26 11:22 ` afzal mohammed
2017-05-26 11:22 ` afzal mohammed
2017-05-27 13:22 ` Russell King - ARM Linux
2017-05-27 13:22 ` Russell King - ARM Linux
2017-05-31 14:39 ` Tony Lindgren
2017-05-31 14:39 ` Tony Lindgren
2017-05-31 14:59 ` Russell King - ARM Linux
2017-05-31 14:59 ` Russell King - ARM Linux
2017-05-31 15:07 ` Tony Lindgren
2017-05-31 15:07 ` Tony Lindgren
2017-05-24 15:50 ` afzal mohammed [this message]
2017-05-24 15:50 ` afzal mohammed
2017-05-25 16:15 ` Florian Fainelli
2017-05-25 16:56 ` Russell King - ARM Linux
2017-05-25 17:10 ` Tony Lindgren
2017-05-25 17:10 ` Tony Lindgren
2017-05-25 17:24 ` Florian Fainelli
2017-05-26 9:44 ` Vladimir Murzin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170524155045.GA4082@afzalpc \
--to=afzal.mohd.ma@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.