From: Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: Jia-Ju Bai <baijiaju1990-9Onoh4P/yGk@public.gmane.org>
Cc: monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH V3] rxe: Fix a sleep-in-atomic bug in post_one_send
Date: Mon, 5 Jun 2017 09:57:05 +0300 [thread overview]
Message-ID: <20170605065704.GD2572@yuvallap> (raw)
In-Reply-To: <1496305735-21741-1-git-send-email-baijiaju1990-9Onoh4P/yGk@public.gmane.org>
On Thu, Jun 01, 2017 at 04:28:55PM +0800, Jia-Ju Bai wrote:
> The driver may sleep under a spin lock, and the function call path is:
> post_one_send (acquire the lock by spin_lock_irqsave)
> init_send_wqe
> copy_from_user --> may sleep
>
> To fix it, the lock is released before copy_from_user, and the lock is
> acquired again after this function. The parameter "flags" is used to
> restore and save the irq status.
> Thank Leon for good advice.
>
> This patch corrects the mistakes in V2. (Thank Ram for pointing it out)
This line should be added after "---" so it will not go into final commit
message.
>
> Signed-off-by: Jia-Ju Bai <baijiaju1990-9Onoh4P/yGk@public.gmane.org>
> ---
> drivers/infiniband/sw/rxe/rxe_verbs.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
> index 83d709e..5293d15 100644
> --- a/drivers/infiniband/sw/rxe/rxe_verbs.c
> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
> @@ -721,11 +721,11 @@ static void init_send_wr(struct rxe_qp *qp, struct rxe_send_wr *wr,
>
> static int init_send_wqe(struct rxe_qp *qp, struct ib_send_wr *ibwr,
> unsigned int mask, unsigned int length,
> - struct rxe_send_wqe *wqe)
> + struct rxe_send_wqe *wqe, unsigned long *flags)
> {
> int num_sge = ibwr->num_sge;
> struct ib_sge *sge;
> - int i;
> + int i, err;
> u8 *p;
>
> init_send_wr(qp, &wqe->wr, ibwr);
> @@ -740,8 +740,11 @@ static int init_send_wqe(struct rxe_qp *qp, struct ib_send_wr *ibwr,
>
> sge = ibwr->sg_list;
> for (i = 0; i < num_sge; i++, sge++) {
> - if (qp->is_user && copy_from_user(p, (__user void *)
> - (uintptr_t)sge->addr, sge->length))
> + spin_unlock_irqrestore(&qp->sq.sq_lock, *flags);
> + err = copy_from_user(p, (__user void *)
> + (uintptr_t)sge->addr, sge->length);
> + spin_lock_irqsave(&qp->sq.sq_lock, *flags);
> + if (qp->is_user && err)
> return -EFAULT;
>
> else if (!qp->is_user)
> @@ -794,7 +797,7 @@ static int post_one_send(struct rxe_qp *qp, struct ib_send_wr *ibwr,
>
> send_wqe = producer_addr(sq->queue);
>
> - err = init_send_wqe(qp, ibwr, mask, length, send_wqe);
> + err = init_send_wqe(qp, ibwr, mask, length, send_wqe, &flags);
> if (unlikely(err))
> goto err1;
>
> --
> 1.7.9.5
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Yuval Shaia <yuval.shaia@oracle.com>
To: Jia-Ju Bai <baijiaju1990@163.com>
Cc: monis@mellanox.com, sean.hefty@intel.com, dledford@redhat.com,
hal.rosenstock@gmail.com, leon@kernel.org,
linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V3] rxe: Fix a sleep-in-atomic bug in post_one_send
Date: Mon, 5 Jun 2017 09:57:05 +0300 [thread overview]
Message-ID: <20170605065704.GD2572@yuvallap> (raw)
In-Reply-To: <1496305735-21741-1-git-send-email-baijiaju1990@163.com>
On Thu, Jun 01, 2017 at 04:28:55PM +0800, Jia-Ju Bai wrote:
> The driver may sleep under a spin lock, and the function call path is:
> post_one_send (acquire the lock by spin_lock_irqsave)
> init_send_wqe
> copy_from_user --> may sleep
>
> To fix it, the lock is released before copy_from_user, and the lock is
> acquired again after this function. The parameter "flags" is used to
> restore and save the irq status.
> Thank Leon for good advice.
>
> This patch corrects the mistakes in V2. (Thank Ram for pointing it out)
This line should be added after "---" so it will not go into final commit
message.
>
> Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
> ---
> drivers/infiniband/sw/rxe/rxe_verbs.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
> index 83d709e..5293d15 100644
> --- a/drivers/infiniband/sw/rxe/rxe_verbs.c
> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
> @@ -721,11 +721,11 @@ static void init_send_wr(struct rxe_qp *qp, struct rxe_send_wr *wr,
>
> static int init_send_wqe(struct rxe_qp *qp, struct ib_send_wr *ibwr,
> unsigned int mask, unsigned int length,
> - struct rxe_send_wqe *wqe)
> + struct rxe_send_wqe *wqe, unsigned long *flags)
> {
> int num_sge = ibwr->num_sge;
> struct ib_sge *sge;
> - int i;
> + int i, err;
> u8 *p;
>
> init_send_wr(qp, &wqe->wr, ibwr);
> @@ -740,8 +740,11 @@ static int init_send_wqe(struct rxe_qp *qp, struct ib_send_wr *ibwr,
>
> sge = ibwr->sg_list;
> for (i = 0; i < num_sge; i++, sge++) {
> - if (qp->is_user && copy_from_user(p, (__user void *)
> - (uintptr_t)sge->addr, sge->length))
> + spin_unlock_irqrestore(&qp->sq.sq_lock, *flags);
> + err = copy_from_user(p, (__user void *)
> + (uintptr_t)sge->addr, sge->length);
> + spin_lock_irqsave(&qp->sq.sq_lock, *flags);
> + if (qp->is_user && err)
> return -EFAULT;
>
> else if (!qp->is_user)
> @@ -794,7 +797,7 @@ static int post_one_send(struct rxe_qp *qp, struct ib_send_wr *ibwr,
>
> send_wqe = producer_addr(sq->queue);
>
> - err = init_send_wqe(qp, ibwr, mask, length, send_wqe);
> + err = init_send_wqe(qp, ibwr, mask, length, send_wqe, &flags);
> if (unlikely(err))
> goto err1;
>
> --
> 1.7.9.5
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-05 6:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 8:28 [PATCH V3] rxe: Fix a sleep-in-atomic bug in post_one_send Jia-Ju Bai
2017-06-01 8:28 ` Jia-Ju Bai
[not found] ` <1496305735-21741-1-git-send-email-baijiaju1990-9Onoh4P/yGk@public.gmane.org>
2017-06-01 9:32 ` Moni Shoua
2017-06-01 9:32 ` Moni Shoua
2017-06-05 6:57 ` Yuval Shaia [this message]
2017-06-05 6:57 ` Yuval Shaia
-- strict thread matches above, loose matches on Subject: below --
2017-06-05 7:39 Jia-Ju Bai
2017-06-05 7:39 ` Jia-Ju Bai
[not found] ` <1496648342-906-1-git-send-email-baijiaju1990-9Onoh4P/yGk@public.gmane.org>
2017-06-05 7:44 ` Yuval Shaia
2017-06-05 7:44 ` Yuval Shaia
2017-06-05 8:30 ` Moni Shoua
[not found] ` <CAG9sBKNKTT8ceHrXRhLRns53ejH0kwaLMy-qAzdmo=Hy5h02Yw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-05 8:40 ` Jia-Ju Bai
2017-06-05 8:40 ` Jia-Ju Bai
2017-06-05 9:21 ` Moni Shoua
2017-06-05 7:55 Jia-Ju Bai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170605065704.GD2572@yuvallap \
--to=yuval.shaia-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=baijiaju1990-9Onoh4P/yGk@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.