From: clabbe.montjoie@gmail.com (Corentin Labbe)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: sun8i: a83t: add dwmac-sun8i ethernet driver
Date: Thu, 8 Jun 2017 10:42:22 +0200 [thread overview]
Message-ID: <20170608084222.GA10830@Red> (raw)
In-Reply-To: <20170608083428.csv54tryvgwdb552@flea.home>
On Thu, Jun 08, 2017 at 10:34:28AM +0200, Maxime Ripard wrote:
> On Wed, Jun 07, 2017 at 07:33:45PM +0200, Corentin Labbe wrote:
> > The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed.
> > This patch enable the dwmac-sun8i on the Allwinner a83t SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > ---
> > arch/arm/boot/dts/sun8i-a83t.dtsi | 28 ++++++++++++++++++++++++++++
> > 1 file changed, 28 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > index 01a83406f9ae..7d719b4aeaa9 100644
> > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > @@ -200,6 +200,14 @@
> > #interrupt-cells = <3>;
> > #gpio-cells = <3>;
> >
> > + emac_rgmii_pins: emac-rgmii-pins {
> > + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> > + "PD11", "PD12", "PD13", "PD14", "PD18",
> > + "PD19", "PD21", "PD22", "PD23";
> > + function = "gmac";
> > + drive-strength = <40>;
> > + };
> > +
>
> This is not used anywhere.
>
But will be used by bpim3 board
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
linux@armlinux.org.uk, linux-kernel@vger.kernel.org,
wens@csie.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] ARM: sun8i: a83t: add dwmac-sun8i ethernet driver
Date: Thu, 8 Jun 2017 10:42:22 +0200 [thread overview]
Message-ID: <20170608084222.GA10830@Red> (raw)
In-Reply-To: <20170608083428.csv54tryvgwdb552@flea.home>
On Thu, Jun 08, 2017 at 10:34:28AM +0200, Maxime Ripard wrote:
> On Wed, Jun 07, 2017 at 07:33:45PM +0200, Corentin Labbe wrote:
> > The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed.
> > This patch enable the dwmac-sun8i on the Allwinner a83t SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > ---
> > arch/arm/boot/dts/sun8i-a83t.dtsi | 28 ++++++++++++++++++++++++++++
> > 1 file changed, 28 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > index 01a83406f9ae..7d719b4aeaa9 100644
> > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > @@ -200,6 +200,14 @@
> > #interrupt-cells = <3>;
> > #gpio-cells = <3>;
> >
> > + emac_rgmii_pins: emac-rgmii-pins {
> > + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> > + "PD11", "PD12", "PD13", "PD14", "PD18",
> > + "PD19", "PD21", "PD22", "PD23";
> > + function = "gmac";
> > + drive-strength = <40>;
> > + };
> > +
>
> This is not used anywhere.
>
But will be used by bpim3 board
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
wens@csie.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] ARM: sun8i: a83t: add dwmac-sun8i ethernet driver
Date: Thu, 8 Jun 2017 10:42:22 +0200 [thread overview]
Message-ID: <20170608084222.GA10830@Red> (raw)
In-Reply-To: <20170608083428.csv54tryvgwdb552@flea.home>
On Thu, Jun 08, 2017 at 10:34:28AM +0200, Maxime Ripard wrote:
> On Wed, Jun 07, 2017 at 07:33:45PM +0200, Corentin Labbe wrote:
> > The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed.
> > This patch enable the dwmac-sun8i on the Allwinner a83t SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > ---
> > arch/arm/boot/dts/sun8i-a83t.dtsi | 28 ++++++++++++++++++++++++++++
> > 1 file changed, 28 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > index 01a83406f9ae..7d719b4aeaa9 100644
> > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > @@ -200,6 +200,14 @@
> > #interrupt-cells = <3>;
> > #gpio-cells = <3>;
> >
> > + emac_rgmii_pins: emac-rgmii-pins {
> > + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> > + "PD11", "PD12", "PD13", "PD14", "PD18",
> > + "PD19", "PD21", "PD22", "PD23";
> > + function = "gmac";
> > + drive-strength = <40>;
> > + };
> > +
>
> This is not used anywhere.
>
But will be used by bpim3 board
next prev parent reply other threads:[~2017-06-08 8:42 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-07 17:33 [PATCH v2 0/2] ARM: sunxi: Enable dwmac-sun8i on more boards Corentin Labbe
2017-06-07 17:33 ` Corentin Labbe
2017-06-07 17:33 ` Corentin Labbe
2017-06-07 17:33 ` [PATCH v2 1/2] ARM: sun8i: a83t: Add dt node for the syscon control module Corentin Labbe
2017-06-07 17:33 ` Corentin Labbe
2017-06-08 8:33 ` Maxime Ripard
2017-06-08 8:33 ` Maxime Ripard
2017-06-08 8:33 ` Maxime Ripard
2017-06-07 17:33 ` [PATCH v2 2/2] ARM: sun8i: a83t: add dwmac-sun8i ethernet driver Corentin Labbe
2017-06-07 17:33 ` Corentin Labbe
2017-06-08 8:34 ` Maxime Ripard
2017-06-08 8:34 ` Maxime Ripard
2017-06-08 8:34 ` Maxime Ripard
2017-06-08 8:42 ` Corentin Labbe [this message]
2017-06-08 8:42 ` Corentin Labbe
2017-06-08 8:42 ` Corentin Labbe
2017-06-08 12:48 ` Maxime Ripard
2017-06-08 12:48 ` Maxime Ripard
2017-06-09 4:35 ` Chen-Yu Tsai
2017-06-09 4:35 ` Chen-Yu Tsai
2017-06-09 4:35 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170608084222.GA10830@Red \
--to=clabbe.montjoie@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.