[Buildroot] scsi/scsi.h: No such file or directory

[Buildroot] scsi/scsi.h: No such file or directory

[MD I. Islam]

Hi

I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my config.
But I'm getting the error *scsi/scsi.h: No such file or directory*. I
cleaned and  rebuild the code, but getting the error every time. Could
anyone suggest what is wrong?

My development laptop is a Ubuntu 16.04 with modified 4.11 kernel (running
on a i7 processor). I was wondering if it has anything to do with the error.

Many thanks
Tamim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20170612/b3a272b9/attachment.html>

[Buildroot] scsi/scsi.h: No such file or directory

[Baruch Siach]

Hi Tamim,

On Mon, Jun 12, 2017 at 11:09:41AM -0400, MD I. Islam wrote:
> I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my config.
> But I'm getting the error *scsi/scsi.h: No such file or directory*. I
> cleaned and  rebuild the code, but getting the error every time. Could
> anyone suggest what is wrong?

There is no arm_foundationv8_defconfig in mainline Buildroot. See the list of 
defconfigs in the current master branch at

  https://git.busybox.net/buildroot/tree/configs

Where have you got your Buildroot source tree from?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

[Buildroot] scsi/scsi.h: No such file or directory

[Yann E. MORIN]

Baruch, All,

On 12 June 2017 17:23:32 CEST, Baruch Siach <baruch@tkos.co.il> wrote:
>Hi Tamim,
>
>On Mon, Jun 12, 2017 at 11:09:41AM -0400, MD I. Islam wrote:
>> I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my
>config.
>> But I'm getting the error *scsi/scsi.h: No such file or directory*. I
>> cleaned and  rebuild the code, but getting the error every time.
>Could
>> anyone suggest what is wrong?
>
>There is no arm_foundationv8_defconfig in mainline Buildroot.

Unless I missed something, yes there is...

Regards,
Yann E. MORIN.


-- 
Sent from my phone. Please excuse my brevity.

[Buildroot] scsi/scsi.h: No such file or directory

[MD I. Islam]

I'm using the main source tree. I get the same error on other configs as
well ( such as *beaglebone_defconfig)*. Does it mean that the problem is to
do with my host machine?

Tamim
PhD Student/Graduate Assistant
CS Department, Kent State University
Kent, OH 44240
http://web.cs.kent.edu/~mislam4/ <https://web.cs.kent.edu/~mislam4/>

On Mon, Jun 12, 2017 at 11:48 AM, Yann E. MORIN <yann.morin.1998@free.fr>
wrote:

> Baruch, All,
>
> On 12 June 2017 17:23:32 CEST, Baruch Siach <baruch@tkos.co.il> wrote:
> >Hi Tamim,
> >
> >On Mon, Jun 12, 2017 at 11:09:41AM -0400, MD I. Islam wrote:
> >> I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my
> >config.
> >> But I'm getting the error *scsi/scsi.h: No such file or directory*. I
> >> cleaned and  rebuild the code, but getting the error every time.
> >Could
> >> anyone suggest what is wrong?
> >
> >There is no arm_foundationv8_defconfig in mainline Buildroot.
>
> Unless I missed something, yes there is...
>
> Regards,
> Yann E. MORIN.
>
>
> --
> Sent from my phone. Please excuse my brevity.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20170612/8be67d6b/attachment.html>

[Buildroot] scsi/scsi.h: No such file or directory

[Baruch Siach]

Hi Tamim,

On Mon, Jun 12, 2017 at 12:43:24PM -0400, MD I. Islam wrote:
> I'm using the main source tree. I get the same error on other configs as
> well ( such as *beaglebone_defconfig)*. Does it mean that the problem is to
> do with my host machine?

Did you change anything in the build configuration other than applying these 
defconfigs? If so, please post your .config.

Also, please post the last ~100 lines of your build output.

baruch

> On Mon, Jun 12, 2017 at 11:48 AM, Yann E. MORIN <yann.morin.1998@free.fr>
> wrote:
> 
> > On 12 June 2017 17:23:32 CEST, Baruch Siach <baruch@tkos.co.il> wrote:
> > >On Mon, Jun 12, 2017 at 11:09:41AM -0400, MD I. Islam wrote:
> > >> I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my
> > >config.
> > >> But I'm getting the error *scsi/scsi.h: No such file or directory*. I
> > >> cleaned and  rebuild the code, but getting the error every time.
> > >Could
> > >> anyone suggest what is wrong?
> > >
> > >There is no arm_foundationv8_defconfig in mainline Buildroot.
> >
> > Unless I missed something, yes there is...
> >
> > Regards,
> > Yann E. MORIN.

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] scsi/scsi.h: No such file or directory

[MD I. Islam]

Hi

I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
The last 100 lines of build output is as following:

 -fno-common -Wall -Werror=sequence-point -Wextra -Wmissing-declarations
-Wmissing-parameter-type -Wmissing-prototypes
-Wno-missing-field-initializers -Wredundant-decls -Wsign-compare
-Wtype-limits -Wuninitialized -Wunused-but-set-parameter
-Wunused-but-set-variable -Wunused-parameter -Wunused-result
-Wunused-variable -Wnested-externs -Wpointer-arith -Wstrict-prototypes
-Wformat-security -Wimplicit-function-declaration

Type 'make' or 'make <utilname>' to compile.

>>> host-util-linux 2.29.2 Building
PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
PKG_CONFIG="/home/tamim/buildroot/output/host/usr/bin/pkg-config"
PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1
PKG_CONFIG_ALLOW_SYSTEM_LIBS=1
PKG_CONFIG_LIBDIR="/home/tamim/buildroot/output/host/usr/lib/pkgconfig:/home/tamim/buildroot/output/host/usr/share/pkgconfig"
 /usr/bin/make -j5  -C
/home/tamim/buildroot/output/build/host-util-linux-2.29.2/
/usr/bin/make  all-recursive
Making all in po
make[4]: Nothing to be done for 'all'.
  CC       lib/libmount_la-monotonic.lo
  CC       lib/dmesg-monotonic.o
  CC       sys-utils/fstrim-fstrim.o
  CC       sys-utils/fsfreeze.o
  CC       sys-utils/ctrlaltdel.o
  CC       sys-utils/blkdiscard.o
  CC       lib/monotonic.o
  CC       sys-utils/losetup-losetup.o
  CC       sys-utils/zramctl-zramctl.o
  CC       sys-utils/swapon-swapon.o
  CC       sys-utils/swapon-swapon-common.o
  CC       lib/swapon-swapprober.o
  CC       sys-utils/swapoff-swapoff.o
  CC       lib/swapoff-swapprober.o
  CC       sys-utils/swapoff-swapon-common.o
  CC       sys-utils/pivot_root.o
  CC       sys-utils/chcpu.o
  CC       sys-utils/switch_root.o
  CC       sys-utils/hwclock.o
  CC       sys-utils/hwclock-cmos.o
  CC       sys-utils/hwclock-rtc.o
  CC       misc-utils/blkid-blkid.o
  CC       misc-utils/findfs-findfs.o
  CC       misc-utils/wipefs-wipefs.o
  CC       lib/swaplabel-swapprober.o
  CC       lib/fsck-monotonic.o
  CC       disk-utils/raw.o
  CC       disk-utils/fsck.cramfs.o
  CC       disk-utils/cramfs_common.o
  CC       disk-utils/mkfs.cramfs.o
  CC       disk-utils/blockdev.o
  CC       disk-utils/fdisk-fdisk.o
  CC       disk-utils/fdisk-fdisk-menu.o
  CC       disk-utils/fdisk-fdisk-list.o
  CC       disk-utils/sfdisk-sfdisk.o
  CC       disk-utils/sfdisk-fdisk-list.o
  CC       lib/script-monotonic.o
  CC       term-utils/script-script.o
  CC       term-utils/scriptreplay.o
  CC       term-utils/mesg.o
  CC       term-utils/wall-wall.o
  CC       term-utils/wall-ttymsg.o
  CC       login-utils/last.o
  CC       login-utils/utmpdump.o
  CC       login-utils/lslogins-lslogins.o
  CC       login-utils/lslogins-logindefs.o
  CC       sys-utils/flock.o
  CC       lib/timer.o
  CC       sys-utils/ipcmk.o
  CC       sys-utils/ipcrm.o
  CC       sys-utils/ipcs.o
  CC       sys-utils/ipcutils.o
  CC       sys-utils/lsipc-lsipc.o
  CC       sys-utils/lsipc-ipcutils.o
  CC       sys-utils/renice.o
  CC       sys-utils/setarch.o
  CC       sys-utils/setsid.o
  CC       sys-utils/eject-eject.o
  CC       lib/eject-monotonic.o
sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
directory



Tamim
PhD Student/Graduate Assistant
CS Department, Kent State University
Kent, OH 44240
http://web.cs.kent.edu/~mislam4/ <https://web.cs.kent.edu/~mislam4/>

On Mon, Jun 12, 2017 at 1:33 PM, Baruch Siach <baruch@tkos.co.il> wrote:

> Hi Tamim,
>
> On Mon, Jun 12, 2017 at 12:43:24PM -0400, MD I. Islam wrote:
> > I'm using the main source tree. I get the same error on other configs as
> > well ( such as *beaglebone_defconfig)*. Does it mean that the problem is
> to
> > do with my host machine?
>
> Did you change anything in the build configuration other than applying
> these
> defconfigs? If so, please post your .config.
>
> Also, please post the last ~100 lines of your build output.
>
> baruch
>
> > On Mon, Jun 12, 2017 at 11:48 AM, Yann E. MORIN <yann.morin.1998@free.fr
> >
> > wrote:
> >
> > > On 12 June 2017 17:23:32 CEST, Baruch Siach <baruch@tkos.co.il> wrote:
> > > >On Mon, Jun 12, 2017 at 11:09:41AM -0400, MD I. Islam wrote:
> > > >> I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my
> > > >config.
> > > >> But I'm getting the error *scsi/scsi.h: No such file or directory*.
> I
> > > >> cleaned and  rebuild the code, but getting the error every time.
> > > >Could
> > > >> anyone suggest what is wrong?
> > > >
> > > >There is no arm_foundationv8_defconfig in mainline Buildroot.
> > >
> > > Unless I missed something, yes there is...
> > >
> > > Regards,
> > > Yann E. MORIN.
>
> --
>      http://baruch.siach.name/blog/                  ~. .~   Tk Open
> Systems
> =}------------------------------------------------ooO--U--
> Ooo------------{=
>    - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20170614/0b9d1224/attachment.html>

[Buildroot] scsi/scsi.h: No such file or directory

[Yann E. MORIN]

Tamim, All,

Please, do not post HTML mail, and do not top-post; this is considered
bad practice. Send mails as plain tesxt, and reply below the mail you
are replying to.

On 2017-06-14 16:42 -0400, MD I. Islam spake thusly:
> I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
> The last 100 lines of build output is as following:
[--SNIP--]
> >>> host-util-linux 2.29.2 Building
> PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
>   CC       sys-utils/eject-eject.o
> sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
> directory

So, this fails while building the host variant of util-linux. So your
build machine is missing some critical system headers.

It looks like you are using a Ubuntu machine, and this header is
normally installed by libc6-dev, which you would have installed if you
install the meta-package build-essential.

Please, check the requirements in the manual:

    https://buildroot.org/downloads/manual/manual.html#requirement

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] scsi/scsi.h: No such file or directory

[MD I. Islam]

Hi Yann

Thanks for letting me know about the plain-text email! I have
build-essential, libc6-dev, cpio and open-iscsi installed. Am I
missing anything?

Thanks
Tamim

On Wed, Jun 14, 2017 at 5:13 PM, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
> Tamim, All,
>
> Please, do not post HTML mail, and do not top-post; this is considered
> bad practice. Send mails as plain tesxt, and reply below the mail you
> are replying to.
>
> On 2017-06-14 16:42 -0400, MD I. Islam spake thusly:
>> I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
>> The last 100 lines of build output is as following:
> [--SNIP--]
>> >>> host-util-linux 2.29.2 Building
>> PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
>>   CC       sys-utils/eject-eject.o
>> sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
>> directory
>
> So, this fails while building the host variant of util-linux. So your
> build machine is missing some critical system headers.
>
> It looks like you are using a Ubuntu machine, and this header is
> normally installed by libc6-dev, which you would have installed if you
> install the meta-package build-essential.
>
> Please, check the requirements in the manual:
>
>     https://buildroot.org/downloads/manual/manual.html#requirement
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'

[Buildroot] scsi/scsi.h: No such file or directory

[Baruch Siach]

Hi Tamim,

On Wed, Jun 14, 2017 at 05:35:39PM -0400, MD I. Islam wrote:
> Thanks for letting me know about the plain-text email!

But you are still top posting[1]. Please use reply to emails inline[2], like 
Yann and I did.

> I have build-essential, libc6-dev, cpio and open-iscsi installed. Am I
> missing anything?

Do you have the file /usr/include/scsi/scsi.h on your host? It should be part 
of libc6-dev.

baruch

[1] https://en.wikipedia.org/wiki/Posting_style#Top-posting

[2] https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

> On Wed, Jun 14, 2017 at 5:13 PM, Yann E. MORIN <yann.morin.1998@free.fr> 
>   wrote:
> > Tamim, All,
> >
> > Please, do not post HTML mail, and do not top-post; this is considered
> > bad practice. Send mails as plain tesxt, and reply below the mail you
> > are replying to.
> >
> > On 2017-06-14 16:42 -0400, MD I. Islam spake thusly:
> >> I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
> >> The last 100 lines of build output is as following:
> > [--SNIP--]
> >> >>> host-util-linux 2.29.2 Building
> >> PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
> >>   CC       sys-utils/eject-eject.o
> >> sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
> >> directory
> >
> > So, this fails while building the host variant of util-linux. So your
> > build machine is missing some critical system headers.
> >
> > It looks like you are using a Ubuntu machine, and this header is
> > normally installed by libc6-dev, which you would have installed if you
> > install the meta-package build-essential.
> >
> > Please, check the requirements in the manual:
> >
> >     https://buildroot.org/downloads/manual/manual.html#requirement

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] scsi/scsi.h: No such file or directory

[MD I. Islam]

HI Baruch

Yeah, /usr/include/scsi/scsi.h was missing. I I updated the kernel of
my host machine with defconfig in the main kernel source tree. After
going back to the original ubuntu kernel, I got it working. Any idea
what kernel config is responsible for this?

I prefer top-posting over interleaving. Is there a reason I would need
to use interleaving?

Many thanks!
Tamim


On Wed, Jun 14, 2017 at 11:06 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> Hi Tamim,
>
> On Wed, Jun 14, 2017 at 05:35:39PM -0400, MD I. Islam wrote:
>> Thanks for letting me know about the plain-text email!
>
> But you are still top posting[1]. Please use reply to emails inline[2], like
> Yann and I did.
>
>> I have build-essential, libc6-dev, cpio and open-iscsi installed. Am I
>> missing anything?
>
> Do you have the file /usr/include/scsi/scsi.h on your host? It should be part
> of libc6-dev.
>
> baruch
>
> [1] https://en.wikipedia.org/wiki/Posting_style#Top-posting
>
> [2] https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
>
>> On Wed, Jun 14, 2017 at 5:13 PM, Yann E. MORIN <yann.morin.1998@free.fr>
>>   wrote:
>> > Tamim, All,
>> >
>> > Please, do not post HTML mail, and do not top-post; this is considered
>> > bad practice. Send mails as plain tesxt, and reply below the mail you
>> > are replying to.
>> >
>> > On 2017-06-14 16:42 -0400, MD I. Islam spake thusly:
>> >> I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
>> >> The last 100 lines of build output is as following:
>> > [--SNIP--]
>> >> >>> host-util-linux 2.29.2 Building
>> >> PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
>> >>   CC       sys-utils/eject-eject.o
>> >> sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
>> >> directory
>> >
>> > So, this fails while building the host variant of util-linux. So your
>> > build machine is missing some critical system headers.
>> >
>> > It looks like you are using a Ubuntu machine, and this header is
>> > normally installed by libc6-dev, which you would have installed if you
>> > install the meta-package build-essential.
>> >
>> > Please, check the requirements in the manual:
>> >
>> >     https://buildroot.org/downloads/manual/manual.html#requirement
>
> --
>      http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
>    - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] scsi/scsi.h: No such file or directory

[Baruch Siach]

Hi Tamim,

On Fri, Jun 16, 2017 at 03:24:15PM -0400, MD I. Islam wrote:
> Yeah, /usr/include/scsi/scsi.h was missing. I I updated the kernel of
> my host machine with defconfig in the main kernel source tree. After
> going back to the original ubuntu kernel, I got it working. Any idea
> what kernel config is responsible for this?

I have no idea how a custom kernel install would influence libc provided 
headers, let alone delete them.

> I prefer top-posting over interleaving. Is there a reason I would need
> to use interleaving?

Because this is the convention in this list, as well as in most related 
mailing lists. That advantage of this style is that it makes it easier for the 
reader to see the context of your response.

baruch

> On Wed, Jun 14, 2017 at 11:06 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> > On Wed, Jun 14, 2017 at 05:35:39PM -0400, MD I. Islam wrote:
> >> Thanks for letting me know about the plain-text email!
> >
> > But you are still top posting[1]. Please use reply to emails inline[2], like
> > Yann and I did.
> >
> >> I have build-essential, libc6-dev, cpio and open-iscsi installed. Am I
> >> missing anything?
> >
> > Do you have the file /usr/include/scsi/scsi.h on your host? It should be part
> > of libc6-dev.
> >
> > baruch
> >
> > [1] https://en.wikipedia.org/wiki/Posting_style#Top-posting
> >
> > [2] https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
> >
> >> On Wed, Jun 14, 2017 at 5:13 PM, Yann E. MORIN <yann.morin.1998@free.fr>
> >>   wrote:
> >> > Tamim, All,
> >> >
> >> > Please, do not post HTML mail, and do not top-post; this is considered
> >> > bad practice. Send mails as plain tesxt, and reply below the mail you
> >> > are replying to.
> >> >
> >> > On 2017-06-14 16:42 -0400, MD I. Islam spake thusly:
> >> >> I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
> >> >> The last 100 lines of build output is as following:
> >> > [--SNIP--]
> >> >> >>> host-util-linux 2.29.2 Building
> >> >> PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
> >> >>   CC       sys-utils/eject-eject.o
> >> >> sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
> >> >> directory
> >> >
> >> > So, this fails while building the host variant of util-linux. So your
> >> > build machine is missing some critical system headers.
> >> >
> >> > It looks like you are using a Ubuntu machine, and this header is
> >> > normally installed by libc6-dev, which you would have installed if you
> >> > install the meta-package build-essential.
> >> >
> >> > Please, check the requirements in the manual:
> >> >
> >> >     https://buildroot.org/downloads/manual/manual.html#requirement

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] scsi/scsi.h: No such file or directory

[MD I. Islam]

Hi Baruch

On Sat, Jun 17, 2017 at 5:27 PM, Baruch Siach <baruch@tkos.co.il> wrote:
> Hi Tamim,
>
> On Fri, Jun 16, 2017 at 03:24:15PM -0400, MD I. Islam wrote:
>> Yeah, /usr/include/scsi/scsi.h was missing. I I updated the kernel of
>> my host machine with defconfig in the main kernel source tree. After
>> going back to the original ubuntu kernel, I got it working. Any idea
>> what kernel config is responsible for this?
>
> I have no idea how a custom kernel install would influence libc provided
> headers, let alone delete them.

My bad, I used INSTALL_HDR_PATH=/usr/ in header_install which screwed
things up. After pointing it to /usr/include, it works as expected.

>
>> I prefer top-posting over interleaving. Is there a reason I would need
>> to use interleaving?
>
> Because this is the convention in this list, as well as in most related
> mailing lists. That advantage of this style is that it makes it easier for the
> reader to see the context of your response.

Thanks for your helps and suggestions!

>
> baruch
>
>> On Wed, Jun 14, 2017 at 11:06 PM, Baruch Siach <baruch@tkos.co.il> wrote:
>> > On Wed, Jun 14, 2017 at 05:35:39PM -0400, MD I. Islam wrote:
>> >> Thanks for letting me know about the plain-text email!
>> >
>> > But you are still top posting[1]. Please use reply to emails inline[2], like
>> > Yann and I did.
>> >
>> >> I have build-essential, libc6-dev, cpio and open-iscsi installed. Am I
>> >> missing anything?
>> >
>> > Do you have the file /usr/include/scsi/scsi.h on your host? It should be part
>> > of libc6-dev.
>> >
>> > baruch
>> >
>> > [1] https://en.wikipedia.org/wiki/Posting_style#Top-posting
>> >
>> > [2] https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
>> >
>> >> On Wed, Jun 14, 2017 at 5:13 PM, Yann E. MORIN <yann.morin.1998@free.fr>
>> >>   wrote:
>> >> > Tamim, All,
>> >> >
>> >> > Please, do not post HTML mail, and do not top-post; this is considered
>> >> > bad practice. Send mails as plain tesxt, and reply below the mail you
>> >> > are replying to.
>> >> >
>> >> > On 2017-06-14 16:42 -0400, MD I. Islam spake thusly:
>> >> >> I'm using *arm_foundationv8_defconfig. *I didn't make any change in config.
>> >> >> The last 100 lines of build output is as following:
>> >> > [--SNIP--]
>> >> >> >>> host-util-linux 2.29.2 Building
>> >> >> PATH="/home/tamim/buildroot/output/host/bin:/home/tamim/buildroot/output/host/sbin:/home/tamim/buildroot/output/host/usr/bin:/home/tamim/buildroot/output/host/usr/sbin:/home/tamim/bin:/home/tamim/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
>> >> >>   CC       sys-utils/eject-eject.o
>> >> >> sys-utils/eject.c:41:23: fatal error: scsi/scsi.h: No such file or
>> >> >> directory
>> >> >
>> >> > So, this fails while building the host variant of util-linux. So your
>> >> > build machine is missing some critical system headers.
>> >> >
>> >> > It looks like you are using a Ubuntu machine, and this header is
>> >> > normally installed by libc6-dev, which you would have installed if you
>> >> > install the meta-package build-essential.
>> >> >
>> >> > Please, check the requirements in the manual:
>> >> >
>> >> >     https://buildroot.org/downloads/manual/manual.html#requirement
>
> --
>      http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
>    - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] scsi/scsi.h: No such file or directory

[Baruch Siach]

Hi Yann,

On Mon, Jun 12, 2017 at 03:48:06PM +0000, Yann E. MORIN wrote:
> On 12 June 2017 17:23:32 CEST, Baruch Siach <baruch@tkos.co.il> wrote:
> >On Mon, Jun 12, 2017 at 11:09:41AM -0400, MD I. Islam wrote:
> >> I'm new to Buildroot. I'm using *arm_foundationv8_defconfig* as my
> >config.
> >> But I'm getting the error *scsi/scsi.h: No such file or directory*. I
> >> cleaned and  rebuild the code, but getting the error every time.
> >Could
> >> anyone suggest what is wrong?
> >
> >There is no arm_foundationv8_defconfig in mainline Buildroot.
> 
> Unless I missed something, yes there is...

Ah, of course. I somehow expected arm_ to precede armadeus_. Sorry.

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -