From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-kernel@vger.kernel.org,
"Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>,
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v2] perf: libdw support for powerpc
Date: Tue, 20 Jun 2017 18:53:14 -0300 [thread overview]
Message-ID: <20170620215314.GJ13640@kernel.org> (raw)
In-Reply-To: <1496312681-20133-1-git-send-email-pbonzini@redhat.com>
Em Thu, Jun 01, 2017 at 12:24:41PM +0200, Paolo Bonzini escreveu:
> Porting PPC to libdw only needs an architecture-specific hook to move
> the register state from perf to libdw.
>
> The ARM and x86 architectures already use libdw, and it is useful to
> have as much common code for the unwinder as possible. Mark Wielaard
> has contributed a frame-based unwinder to libdw, so that unwinding works
> even for binaries that do not have CFI information. In addition,
> libunwind is always preferred to libdw by the build machinery so this
> cannot introduce regressions on machines that have both libunwind and
> libdw installed.
>
> Cc: acme@kernel.org
> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
> Cc: linuxppc-dev@lists.ozlabs.org
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> v1->v2: fix for 4.11->4.12 changes
Thanks, I'll test it and collect the Acked-by provided, will go into
perf/core.
- Arnaldo
> tools/perf/Makefile.config | 2 +-
> tools/perf/arch/powerpc/util/Build | 2 +
> tools/perf/arch/powerpc/util/unwind-libdw.c | 73 +++++++++++++++++++++++++++++
> 3 files changed, 76 insertions(+), 1 deletion(-)
> create mode 100644 tools/perf/arch/powerpc/util/unwind-libdw.c
>
> diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
> index 8354d04b392f..e7b04a729417 100644
> --- a/tools/perf/Makefile.config
> +++ b/tools/perf/Makefile.config
> @@ -61,7 +61,7 @@ endif
> # Disable it on all other architectures in case libdw unwind
> # support is detected in system. Add supported architectures
> # to the check.
> -ifneq ($(ARCH),$(filter $(ARCH),x86 arm))
> +ifneq ($(ARCH),$(filter $(ARCH),x86 arm powerpc))
> NO_LIBDW_DWARF_UNWIND := 1
> endif
>
> diff --git a/tools/perf/arch/powerpc/util/Build b/tools/perf/arch/powerpc/util/Build
> index 90ad64b231cd..2e6595310420 100644
> --- a/tools/perf/arch/powerpc/util/Build
> +++ b/tools/perf/arch/powerpc/util/Build
> @@ -5,4 +5,6 @@ libperf-y += perf_regs.o
>
> libperf-$(CONFIG_DWARF) += dwarf-regs.o
> libperf-$(CONFIG_DWARF) += skip-callchain-idx.o
> +
> libperf-$(CONFIG_LIBUNWIND) += unwind-libunwind.o
> +libperf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o
> diff --git a/tools/perf/arch/powerpc/util/unwind-libdw.c b/tools/perf/arch/powerpc/util/unwind-libdw.c
> new file mode 100644
> index 000000000000..3a24b3c43273
> --- /dev/null
> +++ b/tools/perf/arch/powerpc/util/unwind-libdw.c
> @@ -0,0 +1,73 @@
> +#include <elfutils/libdwfl.h>
> +#include "../../util/unwind-libdw.h"
> +#include "../../util/perf_regs.h"
> +#include "../../util/event.h"
> +
> +/* See backends/ppc_initreg.c and backends/ppc_regs.c in elfutils. */
> +static const int special_regs[3][2] = {
> + { 65, PERF_REG_POWERPC_LINK },
> + { 101, PERF_REG_POWERPC_XER },
> + { 109, PERF_REG_POWERPC_CTR },
> +};
> +
> +bool libdw__arch_set_initial_registers(Dwfl_Thread *thread, void *arg)
> +{
> + struct unwind_info *ui = arg;
> + struct regs_dump *user_regs = &ui->sample->user_regs;
> + Dwarf_Word dwarf_regs[32], dwarf_nip;
> + size_t i;
> +
> +#define REG(r) ({ \
> + Dwarf_Word val = 0; \
> + perf_reg_value(&val, user_regs, PERF_REG_POWERPC_##r); \
> + val; \
> +})
> +
> + dwarf_regs[0] = REG(R0);
> + dwarf_regs[1] = REG(R1);
> + dwarf_regs[2] = REG(R2);
> + dwarf_regs[3] = REG(R3);
> + dwarf_regs[4] = REG(R4);
> + dwarf_regs[5] = REG(R5);
> + dwarf_regs[6] = REG(R6);
> + dwarf_regs[7] = REG(R7);
> + dwarf_regs[8] = REG(R8);
> + dwarf_regs[9] = REG(R9);
> + dwarf_regs[10] = REG(R10);
> + dwarf_regs[11] = REG(R11);
> + dwarf_regs[12] = REG(R12);
> + dwarf_regs[13] = REG(R13);
> + dwarf_regs[14] = REG(R14);
> + dwarf_regs[15] = REG(R15);
> + dwarf_regs[16] = REG(R16);
> + dwarf_regs[17] = REG(R17);
> + dwarf_regs[18] = REG(R18);
> + dwarf_regs[19] = REG(R19);
> + dwarf_regs[20] = REG(R20);
> + dwarf_regs[21] = REG(R21);
> + dwarf_regs[22] = REG(R22);
> + dwarf_regs[23] = REG(R23);
> + dwarf_regs[24] = REG(R24);
> + dwarf_regs[25] = REG(R25);
> + dwarf_regs[26] = REG(R26);
> + dwarf_regs[27] = REG(R27);
> + dwarf_regs[28] = REG(R28);
> + dwarf_regs[29] = REG(R29);
> + dwarf_regs[30] = REG(R30);
> + dwarf_regs[31] = REG(R31);
> + if (!dwfl_thread_state_registers(thread, 0, 32, dwarf_regs))
> + return false;
> +
> + dwarf_nip = REG(NIP);
> + dwfl_thread_state_register_pc(thread, dwarf_nip);
> + for (i = 0; i < ARRAY_SIZE(special_regs); i++) {
> + Dwarf_Word val = 0;
> + perf_reg_value(&val, user_regs, special_regs[i][1]);
> + if (!dwfl_thread_state_registers(thread,
> + special_regs[i][0], 1,
> + &val))
> + return false;
> + }
> +
> + return true;
> +}
> --
> 1.8.3.1
next prev parent reply other threads:[~2017-06-20 21:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 10:24 [PATCH v2] perf: libdw support for powerpc Paolo Bonzini
2017-06-09 12:30 ` [PATCH v2] perf: libdw support for powerpc [ping] Paolo Bonzini
2017-06-12 11:58 ` Ravi Bangoria
2017-06-13 11:44 ` Mark Wielaard
2017-06-13 11:44 ` Mark Wielaard
2017-06-13 15:55 ` Ravi Bangoria
2017-06-15 8:46 ` Milian Wolff
2017-06-15 11:16 ` Mark Wielaard
2017-06-15 11:16 ` Mark Wielaard
2017-06-16 4:21 ` Ravi Bangoria
2017-06-21 1:06 ` Arnaldo Carvalho de Melo
2017-06-21 1:31 ` Mark Wielaard
2017-06-21 1:07 ` Arnaldo Carvalho de Melo
2017-06-21 8:16 ` Milian Wolff
2017-06-21 12:48 ` Arnaldo Carvalho de Melo
2017-06-21 14:19 ` Milian Wolff
2017-06-21 14:33 ` Arnaldo Carvalho de Melo
2017-06-15 12:13 ` [PATCH v2] perf: libdw support for powerpc Jiri Olsa
2017-06-20 21:53 ` Arnaldo Carvalho de Melo [this message]
2017-06-21 18:19 ` [tip:perf/core] perf unwind: Support " tip-bot for Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170620215314.GJ13640@kernel.org \
--to=acme@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=pbonzini@redhat.com \
--cc=ravi.bangoria@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.